Water Based Industrial Coatings
from FORREST Technical Coatings
Rust-inhibitive barrier coatings for use on interior or exterior steel substrates and compatible with various top coats. These versatile primers are recommended for use on machinery, structural steel, agricultural equipment and fabricated metals. Most products are available in standard white, red... [See More]
- Form: Liquid; Solvent; Water
- Substrate: Metallic; Steel
- Type: Coating; Primer; Base Coat; Paint
- Cure / Setting Technology: Film Drying
from Ellsworth Adhesives
HumiSeal ® TS 300 TempSeal Masking Compound is a high temperature, non-flammable, temporary mask that is used to protect and cover circuit boards during conformal coatings. It can be easily peeled, contains no ammonia, and will not prevent thermal cure of silicone coatings. It is applied... [See More]
- Form: Water
- Type: Coating; Sealer
from Victrex PLC
VICOTE F804 has been specifically formulated to provide a resilient coating with high wear and abrasion resistance on ferrous substrates such as carbon and cast steels. These properties are retained at high temperatures where other coatings would potentially fail. Typical properties are high... [See More]
- Form: Water; Powder
- Chemistry: Resin; PEEK
- Type: Coating; Powder Coating; Aqueous Dispersion
- Substrate: Metallic; Steel
from Everlube Products
Everlube 9800 is a thermally cured, low VOC protective coating with a high molecular weight organic binder system. This coating is designed to provide excellent corrosion resistance in a wide variety of environments and may also be used as a primer. Everlube 9800 also offers exceptional chemical and... [See More]
- Form: Water
- Substrate: Metallic
- Type: Coating
- Cure / Setting Technology: Thermally Cured
from FORREST Technical Coatings
A versatile water-reducible alkyd for use on metal substrates for interior and exterior exposure. A high-gloss product with excellent adhesion and corrosion resistance. [See More]
- Form: Liquid; Water
- Substrate: Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®1K Waterbased Urethane Floor Enamel is a gloss, high performance, one component polyester waterbased urethane, formulated specifically for industrial floor applications. Provides outstanding abrasion resistance, good chemical resistance, with excellent color and gloss retention. Fast... [See More]
- Form: Liquid; Water
- Chemistry: Polyurethane; Resin
- Type: Coating; Enamel
- Substrate: Concrete
from Rust-Oleum Corporation
Industrial performance, zero VOC, zero HAP, odorless, single component [See More]
- Form: Liquid; Water
- Chemistry: Acrylic; Polyurethane; Resin
- Type: Enamel; Base Coat; Paint
- Substrate: Metallic; Steel
from Crosslink
Coatings Quickly Dissipate Static ElectricityAnti-static coatings are vital to the safety of materials, machinery and individuals across many different industries. Anti-static coatings, also known as electrostatic dissipation (ESD) coatings, help prevent problems associated with static charge... [See More]
- Form: Liquid; Water
- Chemistry: Polyurethane; Resin
- Type: Coating; Discharge Coating
- Substrate: Glass
from RDM Industrial Products, Inc.
Specially formulated to protect conductive/dissipative flooring, this finish will lengthen its life. It offers long lasting, high gloss, static dissipative properties. With low a VOC level this product is as safe as it is easy to use. Resistance: 107-109 Ohms/sq. Durable. Facilitates dirt removal. [See More]
- Form: Liquid; Water
- Substrate: Ceramic; Plastic
- Type: Coating; Clear Coat
- Cure / Setting Technology: Film Drying
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Water
- Chemistry: Acrylic; Resin
- Type: Coating
from Valspar Corporation (The)
Valspar provides coating solutions for aerosol cans for a wide range of products from food products (whipped cream, cooking spray, etc.) and home care (air fresheners, furniture polish, etc.) to personal care (shaving cream, hairspray, deodorants, hair mousse etc.) and pesticide products (roach and... [See More]
- Form: Water
- Substrate: Aluminum; Steel
- Type: Coating; Varnish
- Industry: Food / Beverage
from Owens Corning® FOAMGLAS® Insulation
A low temperature anti-abrasive (LTAA) coating that reduces abrasion from vibrating piping or equipment by providing a durable bore coating to insulation substrates across a wide range of service temperatures. Product is idea for application to FOAMGLAS ® insulation blocks, curved segments... [See More]
- Form: Aerosol (optional feature); Liquid; Water
- Chemistry: Rubber
- Type: Coating
- Substrate: Other; Insulation
from Whitford Corporation
Excellent glass run coating with outstanding performance to Toyota, Suzuki and GM specifications. [See More]
- Form: Water
- Cure / Setting Technology: Film Drying
- Type: Coating
- Cure Temperature: 302 to 374
from LexJet Corporation
ClearShield ® Anti-Graffiti is a two-component, water-based Liquid Laminate with excellent chemical resistance. It is well suited for high performance applications where hardness, flexibility and abrasion resistance is required. ClearShield Anti-Graffiti is very easy to apply using all... [See More]
- Form: Water
- Coverage: 480
- Type: Coating
from Acoustical Solutions, Inc.
Sound Damping Compound is a water based damping compound for the treatment of vibrating metal, wood, glass, ceramic and most plastic surfaces. This material imparts vibration damping and a shift in the dominant frequency. The resulting structure borne noise reduction provides a means of improving... [See More]
- Form: Paste / Mastic; Water
- Chemistry: Resin; Rubber
- Type: Coating; Sound Damping
- Substrate: Aluminum; Anodized; Ceramic; Glass; Metallic; Plastic; Steel; Wood
from Sanchem, Inc.
Stop rust and corrosion before it starts with SafeGard H water based coating. In just one coat, corrosion control is achieved by using a waterborne barrier coating that contains a balanced corrosion inhibitor system. This corrosion prevention product dries to a translucent light brown dry to the... [See More]
- Form: Liquid; Water
- Substrate: Metallic
- Type: Coating; Primer; Rust Preventive Coating
- Cure / Setting Technology: Film Drying
from PPG Protective & Marine Coatings
Water-based inorganic zinc silicate PCP [See More]
- Form: Water
- Chemistry: Zinc; Metal Filled
- Type: Coating; Primer
- Substrate: Steel
from Columbia Chemical Corporation
Lac-Chro-SEAL ® is a non-hazardous lacquer coating for enhanced corrosion resistance on electroplated deposits and base metals. It air dries quickly to a very thin, clear & glossy finish which prevents fingerprints and provides significant protection to high humidity conditions. [See More]
- Form: Liquid; Water
- Chemistry: Acrylic; Zinc
- Type: Coating; Clear Coat; Lacquer; Sealer
- Substrate: Metallic; Other; Zinc & Zinc Alloy Deposits Over Steel
from Redwood Plastics
Wearlon Super F-4 is the hardest in the line of Wearlon coatings, improving abrasion resistance and prolonging the life of your propeller. It is a water based, environmentally friendly coating that can be painted or sprayed on. Wearlon Super F-4 is a non-stick foul release coating that minimizes... [See More]
- Form: Liquid; Water
- Substrate: Aluminum
- Type: Coating; Non-Stick Foul Release
- Cure / Setting Technology: Film Drying
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Structural Adhesive Primer EW-5000 AS is a sprayable, low VOC, heat curing, structural adhesive primer that contains a non-chromated, corrosion inhibiting package to provide protection against corrosive environments. Complies witrh OSHA 29 CFR 1910.1026. Less than 5... [See More]
- Form: Liquid; Water
- Substrate: Aluminum; Metallic
- Type: Coating; Primer; Adhesive Primer
- Dispensing Method: Sprayable
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®700 HS HIGH SOLIDS WATER BASED EPOXY FLOOR COATING is a 2 component, low VOC, epoxy floor finish/coating designed to provide an attractive, uniform appearance in industrial environments. Formulated for use in medium to heavy traffic conditions. Exceptional chemical resistance,... [See More]
- Form: Liquid; Water
- Chemistry: Epoxy; Resin
- Type: Coating
- Substrate: Concrete; Wood
from Rust-Oleum Corporation
Two component, water based epoxy coating, low risk of flammability [See More]
- Form: Liquid; Water
- Chemistry: Epoxy; Resin
- Type: Coating
- Substrate: Concrete
from RDM Industrial Products, Inc.
This industry popular finish offers low VOC, high gloss, and static dissipative properties. High abrasion resistance. High gloss. Non flaking. Non slippery. Low cost. Low tribogeneration generation. UL listed. No formaldehyde or phthalates. Water based. Surface resistance (RTT): 107-109 Ohms @100... [See More]
- Form: Liquid; Water
- Substrate: Ceramic; Plastic
- Type: Coating; Clear Coat
- Cure / Setting Technology: Film Drying
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Water
- Chemistry: Acrylic; Resin
- Type: Coating
from Valspar Corporation (The)
Valspar has solutions for your 2-Piece beverage can, aluminum bottle, 3-Piece beverage can, beverage end coating and exterior tab coating needs. From water-based inside spray for 2-Piece beer, carbonated soda, energy drinks, hot fill and retort beverages applications to retortable water-based and... [See More]
- Form: Solvent; Water
- Substrate: Aluminum; Steel
- Type: Coating
- Cure / Setting Technology: Ultraviolet Light Curing
from Owens Corning® FOAMGLAS® Insulation
PC ® 74 A1 is a pre-mixed mineral adhesive and basic plaster, class CS II according to DIN EN 998-1 for interior insulation. Hydraulic hardening and surfactant active. The PC ® 74 A1 is non-combustible (building material class A1 according to EN 13501). PC ® 74 A1 mixed with water, can... [See More]
- Form: Water; Powder
- Chemistry: Mixed Mineral
- Type: Coating; Base Coat
- Cure / Setting Technology: Film Drying
from Whitford Corporation
Superior topcoat for reprographic fuser roller. [See More]
- Form: Water
- Substrate: Steel
- Type: Coating; Clear Coat
- Cure / Setting Technology: Film Drying
from LexJet Corporation
ClearJet ® is a solvent-based Liquid Laminate for dye-based inks and water-sensitive ink / media combinations. ClearJet is an inexpensive way to protect your fine art prints and photographic output. It is an easy to apply clear coating and does not require extensive equipment. FA (Fine Art)... [See More]
- Form: Solvent; Water
- Coverage: 370
- Type: Coating
from Columbia Chemical Corporation
Zinc-Chro-SHIELD ® is a unique sealer for chromated zinc deposits which dramatically increases corrosion protection at very little additional cost. And since it's added to the final stagnant rinse at low concentrations (1% to 8% by volume), no additional equipment is required. Zinc-Chro-SHIELD... [See More]
- Form: Liquid; Water
- Chemistry: Zinc; Silicate Based
- Type: Coating; Sealer
- Substrate: Steel; Other; Zinc & Zinc Alloy Deposits Over Steel
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Structural Adhesive Primer EW-5000 is a sprayable, waterbased, low VOC, heat curing, chromated, corrosion inhibiting primer that can provide protection against corrosive environments. Scotch-Weld EW-5000 primer is designed to provide ambient temperature drying with... [See More]
- Form: Liquid; Water
- Substrate: Aluminum; Metallic
- Type: Coating; Primer; Adhesive Primer
- Dispensing Method: Sprayable
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®FLOOR-PLEX 7100 PRIMER is a heavy duty, VOC compliant, low odor, two component, catalyzed, water borne, polyamide epoxy floor primer. Provides overall performance comparable to that of most solvent borne epoxy floor systems. Designed for use under ArmorSeal ®finish coats. [See More]
- Form: Liquid; Water
- Chemistry: Epoxy; Resin; Polyamide
- Type: Coating; Primer
- Substrate: Concrete
from Rust-Oleum Corporation
Clear, fast drying, oil modified, single component waterborne polyurethane [See More]
- Form: Liquid; Water
- Chemistry: Polyurethane; Resin
- Type: Coating; Clear Coat
- Substrate: Concrete; Wood
from RDM Industrial Products, Inc.
This long lasting urethane enhanced static dissipative floor finish is the prime defense in ESD environments. With consistent resistance reading of 107-109 Ohms @100 volts, this water based finish is used worldwide to protect electronic devices from damage and to protect workers from explosion or... [See More]
- Form: Liquid; Water
- Substrate: Ceramic; Plastic
- Type: Coating; Clear Coat
- Cure / Setting Technology: Film Drying
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Water
- Chemistry: Acrylic; Resin
- Type: Coating
from Valspar Corporation (The)
Valspar ’s paint can coating system quality and performance have made Valspar the market leader in North America. Valspar ’s paint can coating systems are designed with the ability to ensure interior commodity protection and exterior durability. Valspar has coordinated with paint can... [See More]
- Form: Solvent; Water
- Substrate: Aluminum; Steel
- Type: Coating; Powder Coating
- Industry: Food / Beverage
from Whitford Corporation
High temperature resistant; low coefficient of friction; abrasion/wear resistant; easy clean; dry film lubricant; thermoset; wide use temperature; anti-galling. [See More]
- Form: Solvent; Water
- Substrate: Ceramic; Metallic; Plastic; Wood
- Type: Coating
- Cure / Setting Technology: Film Drying
from LexJet Corporation
A water-based Liquid Laminate for non water-sensitive ink/media combinations or solvent based inks. ClearShield ® is an inexpensive way to protect your prints, signs, vehicle graphics, banners, awnings and other products from UV, abrasion and chemical damage. It is an easy to apply clear... [See More]
- Form: Water
- Coverage: 480
- Type: Coating
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®FLOOR-PLEX 7100 is a heavy duty, interior, VOC compliant, low odor, two component, catalyzed, water borne, polyamide epoxy floor coating. This dries rapidly to an extra tough, gloss finish which will withstand heavy industrial traffic, abrasion, and general chemical attack. Provides... [See More]
- Form: Liquid; Water
- Chemistry: Epoxy; Resin; Polyamide
- Type: Coating; Clear Coat
- Substrate: Concrete
from Rust-Oleum Corporation
Low VOC, water based acrylic finish, indoor/outdoor use, gloss retention [See More]
- Form: Liquid; Water
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
- Substrate: Aluminum; Concrete; Metallic; Steel
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Water
- Chemistry: Acrylic; Resin
- Type: Coating
from Valspar Corporation (The)
Whether you pack mild (peas, corn, pet food), moderate (green beans, luncheon meats, tomatoes, tuna) or aggressive foods (salsas, sauerkraut, sauces), Valspar food can coatings have been designed to provide maximum protection for both the packed products and the metal can throughout the processes of... [See More]
- Form: Solvent; Water
- Substrate: Aluminum; Steel
- Type: Coating
- Industry: Food / Beverage
from LexJet Corporation
dreamGUARD Protex 3 is a clear, liquid water-based top coat formulated to protect images printed with solvent, low solvent and UV-curable inks on dreamScape wallcovering materials. It can be applied with a liquid laminator or paint roller. When dry, it forms a non-yellowing, non-cracking, durable... [See More]
- Form: Water
- Type: Coating
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®TREAD-PLEX PRIMER is a general purpose, interior/exterior, VOC compliant, 100% acrylic, low odor, waterborne primer. One component. Water clean up. Fast dry. RECOMMENDED USAGE. For use over prepared concrete and wood floors, steps, stairwells, aisleways, or previously painted floor... [See More]
- Form: Liquid; Water
- Chemistry: Acrylic; Resin
- Type: Coating; Primer
- Substrate: Concrete; Wood
from Rust-Oleum Corporation
Low VOC, fast dry, direct-to-metal, water based acrylic high gloss enamel [See More]
- Form: Liquid; Water
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
- Substrate: Aluminum; Concrete; Metallic; Steel
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Water
- Chemistry: Acrylic; Resin
- Type: Coating
from Valspar Corporation (The)
The markets for monobloc aerosol cans, aluminum bottle cans, collapsible tubes and plastic/laminate tubes demand the highest standards of decoration. To meet these needs, Valspar offers state-of-the-art solvent-based, water-based, and UV coatings specifically developed to meet these exacting... [See More]
- Form: Solvent; Water
- Substrate: Aluminum; Steel
- Type: Coating; Powder Coating; Lacquer; Varnish
- Industry: Food / Beverage
from LexJet Corporation
dreamGUARD Protex 3 is a clear, liquid water-based top coat formulated to protect images printed with solvent, low solvent and UV-curable inks on dreamScape wallcovering materials. It can be applied with a liquid laminator or paint roller. When dry, it forms a non-yellowing, non-cracking, durable... [See More]
- Form: Water
- Type: Coating
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®TREAD-PLEX is a general purpose, interior/ exterior, VOC compliant, 100% acrylic, low odor, waterborne floor coating. This dries rapidly to a tough, alkali resistant finish which will withstand hard wear, abrasion, grease, oils, and cleaning equipment. One component. Water clean up. [See More]
- Form: Liquid; Water
- Chemistry: Acrylic; Resin
- Type: Coating; Clear Coat
- Substrate: Concrete; Wood
from Rust-Oleum Corporation
Low odor, two component, polyamine cured water based epoxy coating [See More]
- Form: Liquid; Water
- Chemistry: Epoxy; Resin
- Type: Coating; Paint
- Substrate: Aluminum; Concrete; Metallic; Steel
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Water
- Chemistry: Acrylic; Resin
- Type: Coating
from LexJet Corporation
LexJet Infinium Bond is a water-based adhesive promoter specifically engineered to be used with LexJet Infinium for applications that require long-term permanency or for tough, hard-to-stick-to surfaces. LexJet Infinium Bond is delivered in concentrate form to allow the end user more flexibility. [See More]
- Form: Water
- Type: Coating
from Sherwin-Williams Protective & Marine Coatings
General Polymers AquArmor “C ” Coating Systems is a 2-3 coat flooring system using a revolutionary new water-based resin technology, AquArmor WBE. It is installed quickly, environmentally friendly and is resistant to problems associated with moisture from the concrete. Advantages. No... [See More]
- Form: Water
- Substrate: Concrete; Wood; Other; Quarry Tile
- Type: Coating
- Cure / Setting Technology: Film Drying; Multicomponent
from Rust-Oleum Corporation
Single component, rust preventative, self-priming, lead & chromate free [See More]
- Form: Liquid; Water
- Chemistry: Acrylic; Resin
- Type: Coating; Base Coat
- Substrate: Concrete; Metallic; Steel
from LexJet Corporation
Sunset Gloss Coating is a non-yellowing, fast-drying, water-based acrylic coating that adds a tough, flexible glossy layer of protection to inkjet prints on canvas and art papers. It can be applied with brushes, high-density foam rollers, or an HPLV paint-sprayer. Sunset Gloss Coating is ready to... [See More]
- Form: Water
- Chemistry: Acrylic; Resin
- Type: Coating
- Coverage: 480
from Sherwin-Williams Protective & Marine Coatings
Bond-Plex WB Acrylic is a single component, waterborne acrylic, adhesion promoting coating formulated for direct application to pre-finished metal siding. Suitable for interior or exterior use. Outstanding early moisture resistance. Outstanding exterior durability and gloss retention. Eliminates the... [See More]
- Form: Liquid; Water
- Chemistry: Acrylic; Aluminum; Resin; Metal Filled (optional feature)
- Type: Coating
- Substrate: Metallic; Other; Fluorocarbons, Silicone Polyesters
from Rust-Oleum Corporation
Single component, water based acrylic, adhesion promoting primer [See More]
- Form: Liquid; Water
- Chemistry: Acrylic; Resin
- Type: Coating; Primer
- Substrate: Aluminum; Concrete; Metallic; Plastic; Steel
from LexJet Corporation
Sunset Satin Coating is a non-yellowing, fast-drying, water-based acrylic coating that adds a tough, flexible layer of protection and a soft luster finish to inkjet prints on canvas and art papers. It can be applied with brushes, high-density foam rollers, or an HPLV paint-sprayer. Sunset Satin... [See More]
- Form: Water
- Chemistry: Acrylic; Resin
- Type: Coating
- Coverage: 480