Exterior Industrial Coatings
from AGC Chemicals Americas, Inc.
AGC ’s new FibraLAST ™ non-fluorinated sizing additives protect paper products from both water and food oils. This new barrier technology is ideal for molded, formed fiber, and cardboard products such as fast-casual bowls, plates, containers and pizza boxes. FibraLAST grades are unique... [See More]
- Location / Orientation: Exterior
- Substrate: Other; Paper Products
- Type: Coating
- Operating Temperature: 32 to 176
from FORREST Technical Coatings
An industrial-grade, two-component acrylic polyurethane designed to provide added chemical and resistance with a satin gloss and textured appearance. Catalyst available for either interior or exterior use. [See More]
- Location / Orientation: Exterior; Interior; Handrails, safety guards, catwalks
- Chemistry: Alkyd; Polyurethane; Resin
- Type: Coating; Clear Coat; Paint
- Substrate: Aluminum; Ceramic; Metallic; Plastic; Steel; Other; Fiberglass
from GGB
TS651 is based on high-performance thermoplastics specifically designed for constant low friction from low to moderately high loads in dry or lubricated conditions. Highly suitable for high-frequency / low amplitude (HFLA) applications, particularly in dry conditions. TS651 is part of the standard... [See More]
- Location / Orientation: Exterior
- Cure / Setting Technology: Thermoplastic
- Type: Coating
- Industry: Automotive; Electronics; Food / Beverage
from AGC Chemicals Americas, Inc.
FibraLAST® non-fluorinated oil/water repellents are ideal for technical textiles. When applied as a thin polymeric coating on textiles, they form a microscopically rough texture that acts as a chemical barrier. This treatment enables textiles to repel oil-based stains and fluids, causing them to... [See More]
- Location / Orientation: Exterior
- Substrate: Other; Paper Products
- Type: Coating
- Form: Liquid
from FORREST Technical Coatings
A corrosion-resistant polyamide epoxy primer for use under high performance fast-dry topcoats. [See More]
- Location / Orientation: Exterior; Interior; Floor; Pavement / Walkway; Handrails, safety guards, catwalks
- Chemistry: Epoxy; Resin
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Steel
from GGB
TS421 is based on engineering thermoplastics, specifically designed for extremely low friction in lubricated conditions under low loads but presenting good characteristics in dry low load conditions as well. This system comprises a primer layer and an active hybrid top-coat. TS421 is part of the... [See More]
- Location / Orientation: Exterior
- Cure / Setting Technology: Thermoplastic
- Type: Coating
- Industry: Automotive; Electronics; Food / Beverage
from AGC Chemicals Americas, Inc.
Fluon ® PTFE Micro powders are PTFE lubricants milled to a very fine powder while retaining excellent lubricity properties. These powders can be compounded in rubber and plastics or dispersed in liquids to improve friction and wear properties of the base material. Many grades are used in... [See More]
- Location / Orientation: Exterior
- Chemistry: Fluoropolymers
- Type: Coating; Powder Coating
- Form: Powder or Granular Material
from FORREST Technical Coatings
Standard polyester TGIC powders are excellent coatings that protect the end product while also providing many decorative colors and special effects looks at the same time. These products can be used for interior or exterior applications. Variety of gloss levels and textures available. [See More]
- Location / Orientation: Exterior; Interior; Handrails, safety guards, catwalks
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
- Type: Coating; Powder Coating; Paint
- Cure / Setting Technology: Thermoset
from GGB
TS225 is based on a nanostructured thermoset polymer designed for low friction and high wear resistance at low to medium loads in dry or lubricated conditions. TS225 is part of the standard TriboShield ™ product range. TYPICAL APPLICATIONS. Piston skirts for internal combustion engines. Garden... [See More]
- Location / Orientation: Exterior
- Cure / Setting Technology: Thermoplastic
- Type: Coating
- Industry: Automotive; Electronics; Food / Beverage
from AGC Chemicals Americas, Inc.
LUMIFLON ® is the first solvent-soluble fluoropolymer resin for coatings that can be cured at room temperature or at elevated temperatures. LUMIFLON resins, used in topcoats, are ultra-weatherable, and maintain their excellent appearance on buildings, bridges, and other structures, as well as on... [See More]
- Location / Orientation: Exterior
- Chemistry: Fluoropolymers; Resin
- Type: Coating; Powder Coating
- Substrate: Aluminum
from FORREST Technical Coatings
Polyurethane coatings are formulated to have excellent flow characteristics while providing good mechanical and chemical resistance. These products also offer exterior durability. [See More]
- Location / Orientation: Exterior; Interior; Handrails, safety guards, catwalks
- Chemistry: Polyurethane; Resin; Polyester
- Type: Coating; Powder Coating; Paint
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
from GGB
TS161 is an engineering thermoplastic based composite coating composed of a primer and a top coat. Specifically designed for low friction at low loading conditions, it presents excellent wear resistance as one of its standout features. TS161 is part of the standard TriboShield ™ product range. [See More]
- Location / Orientation: Exterior
- Cure / Setting Technology: Thermoplastic
- Type: Coating
- Industry: Automotive; Electronics; Food / Beverage
from FORREST Technical Coatings
A fast-drying universal phenolic modified alkyd primer with non-lifting properties. Rust-inhibitive pigments provide excellent corrosion prevention and good weathering characteristics for protection during storage, transit or construction. Appropriate for use on interior or exterior steel substrates... [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Alkyd; Resin; Formaldehyde Resins (Phenolic, Furan, Melamine)
- Type: Coating; Primer; Base Coat; Paint
- Substrate: Metallic; Steel
from FORREST Technical Coatings
FIRMmarker ® Road Marker Adhesive is a 2-part epoxy adhesive designed to affix traffic markers (RPMs), delineators, surface mount traffic indicators, and safety posts to concrete, but can also be used to bond concrete to a variety of other materials such as concrete, wood, or asphalt. FIRMmarker... [See More]
- Location / Orientation: Exterior; Pavement / Walkway
- Chemistry: Epoxy Adhesive
- Type: Coating
- Substrate: Asphalt; Concrete; Wood
from FORREST Technical Coatings
FORREST two-part epoxy coatings provide excellent solvent and corrosion resistance for industrial applications. Ideal for areas where a higher level of performance is required for chemical or solvent exposure. [See More]
- Location / Orientation: Exterior; Interior; Floor; Pavement / Walkway; Handrails, safety guards, catwalks
- Chemistry: Epoxy; Resin
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Steel
from FORREST Technical Coatings
Powder coating is a versatile technology for use on multiple substrates and in multiple applications with the added benefit of low emissions. Available in both TGIC-free and low cure options, our product catalog includes metallic, veins, textures and crinkle effects. [See More]
- Location / Orientation: Exterior; Interior; Handrails, safety guards, catwalks
- Chemistry: Polyurethane; Resin
- Type: Coating; Powder Coating; Paint
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
from FORREST Technical Coatings
FORREST Industrial Enamels are easy to apply industrial coatings in low-VOC, HAPS compliant, water-based, quick-dry, and solvent-based formulations. All are available as single-component finishes for interior or exterior use. Available in aerosols for touch-up and industrial maintenance. [See More]
- Location / Orientation: Exterior; Interior; Handrails, safety guards, catwalks
- Chemistry: Alkyd; Resin
- Type: Coating; Clear Coat; Paint
- Substrate: Metallic; Steel
from FORREST Technical Coatings
Rust-inhibitive barrier coatings for use on interior or exterior steel substrates and compatible with various top coats. These versatile primers are recommended for use on machinery, structural steel, agricultural equipment and fabricated metals. Most products are available in standard white, red... [See More]
- Location / Orientation: Exterior; Interior
- Substrate: Metallic; Steel
- Type: Coating; Primer; Base Coat; Paint
- Cure / Setting Technology: Film Drying
from FORREST Technical Coatings
FORREST Polyurethanes are designed to be long-lasting, highly-durable finishes with great color and gloss retention and excellent abrasion resistance. For use over multiple substrates in interior and exterior applications. 800 Series products comply with current environmental regulations in the... [See More]
- Location / Orientation: Exterior; Interior; Handrails, safety guards, catwalks
- Chemistry: Alkyd; Polyurethane; Resin
- Type: Coating; Clear Coat; Paint
- Substrate: Aluminum; Ceramic; Metallic; Plastic; Steel; Other; Fiberglass
from FORREST Technical Coatings
A high-gloss alkyd enamel designed for brush and roll application on metal surfaces. Excellent for marking safety equipment, safety hazards and piping to comply with OSHA color standards. Multiple stocked bases allow for tinting on demand. [See More]
- Location / Orientation: Exterior; Interior; Handrails, safety guards, catwalks
- Chemistry: Alkyd; Resin; Glass Enamel
- Type: Coating; Enamel; Paint
- Substrate: Metallic; Steel; Wood
from FORREST Technical Coatings
A versatile water-reducible alkyd for use on metal substrates for interior and exterior exposure. A high-gloss product with excellent adhesion and corrosion resistance. [See More]
- Location / Orientation: Exterior; Interior
- Substrate: Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from FORREST Technical Coatings
Originally engineered for high temperature resistance, INFERNEX ® L-1200 has proven itself a reliable coating for more than 30 years due to its unique blend of pigments in a silicone polymer resin. Designed for rapid curing and good film integrity, this product also provides good corrosion... [See More]
- Location / Orientation: Exterior; Interior
- Substrate: Metallic; Steel
- Type: Coating; Paint
- Cure / Setting Technology: Film Drying
from FORREST Technical Coatings
Originally developed for exhausts, PS-1000 has earned its reputation for decades as the workhorse for protecting exhaust systems, engines, and silencers. It ’s recognized by its black smooth finish and ability to withstand temperatures up to 1000 ° F (538 ° C). It also features... [See More]
- Location / Orientation: Exterior; Interior
- Substrate: Metallic; Steel
- Type: Coating; Powder Coating; Paint
- Cure / Setting Technology: Thermoset
from FORREST Technical Coatings
Stove Bright High Temperature Paint is a liquid coating sprayed on properly prepared metal substrate for a long-lasting finish that can withstand peak temperatures to 1200 °F (650 °C). Backed by decades of proven performance, these coatings are the industry standard for heat resistance in... [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Resin; Silicone
- Type: Coating; Paint
- Substrate: Aluminum; Concrete; Metallic; Steel; Other
from Sherwin-Williams
Exterior Products. Whether it ’s new construction or a recoat, a single plane or a commercial fleet, we have the quality products you need to make every application last. Interior Primers. Aerospace Coatings offered by Sherwin-Williams are available in a variety of Primer products specifically... [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Resin
- Type: Coating; Primer; Base Coat; Clear Coat; Paint
- Substrate: Metallic
from Aervoe Industries Incorporated
Quick-drying, asphalt-based material, forms a smooth, even, protective film [See More]
- Location / Orientation: Exterior; Roof
- Chemistry: Resin
- Type: Coating; Primer
- Substrate: Concrete; Metallic; Plastic; Wood; Other; Vinyl
from Valspar Corporation (The)
Durable, Useable, Affordable —more than Able. “Value ” is built into Valspar. Alamo White ™ is a shining example of high tech in a highly affordable product. Use this coating for a durable, sun and rain resistant outdoor option. Alamo White is also available in USDA compliant... [See More]
- Location / Orientation: Exterior; Interior; Roof; Wall
- Chemistry: Resin; Polyester
- Type: Coating
- Substrate: Aluminum; Steel
from Columbia Chemical Corporation
COLSID ® AP is a process for acid chloride zinc plating specially designed for mixed NH4Cl/KCl baths. COLSID AP contains a special ductilizer compound which insures extremely ductile, bright deposits. It produces little or no foam and can operate at high temperatures - over 125 °F/52 °C. [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Zinc; Acid Chloride Zinc Plating
- Type: Coating; Zinc Plating
- Substrate: Steel
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®1K Waterbased Urethane Floor Enamel is a gloss, high performance, one component polyester waterbased urethane, formulated specifically for industrial floor applications. Provides outstanding abrasion resistance, good chemical resistance, with excellent color and gloss retention. Fast... [See More]
- Location / Orientation: Exterior; Interior; Floor
- Chemistry: Polyurethane; Resin
- Type: Coating; Enamel
- Substrate: Concrete
from Dampney Company, Inc.
Formulated to beautify, extend the life, and preserve the appearance [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Acrylic; Resin; Acrylic Polymer and Copolymer
- Type: Stain
- Substrate: Concrete
from Epoxies Etc...
Deco-Coat 2570 Epoxy Resin is an ultra clear, high gloss, durable coating. This liquid polymer epoxy resin is formulated without solvents and is therefore safe and easy to use. It is formulated in a convenient 1:1 by volume mix ration. [See More]
- Location / Orientation: Exterior; Floor
- Chemistry: Epoxy; Resin
- Type: Coating; Clear Coat
- Substrate: Wood
from Heresite Protective Coatings, LLC
This family of thin film, air dry phenolics is excellent for resistance to corrosive fume atmospheres and is particularly good in marine and salt air environments. VR-514 coatings exhibit superior durability, excellent adhesion and good flexibility. Typical applications include Swimming Pools, Waste... [See More]
- Location / Orientation: Exterior
- Chemistry: Resin; Formaldehyde Resins (Phenolic, Furan, Melamine)
- Type: Coating
- Substrate: Aluminum; Metallic; Steel
from Crosslink
Coatings currently are available to prevent corrosion. However, many of them employ hexavalent chromium, a highly toxic chemical and known carcinogen. Current legislation in Europe (RoHS) and California (EWRA) are helping to phase out the use of this chemical.Crosslink offers a new, non-toxic smart... [See More]
- Location / Orientation: Exterior
- Chemistry: Resin; Electroactive Polymer
- Type: Coating
- Substrate: Metallic
from Abrisa Technologies
Abrisa Technologies ’ CleanVue ™ PRO – Series of anti-reflection (AR) coatings combine improved handling, cleaning, water shedding, and robust performance with excellent anti-reflective properties making them ideal for displays and optical windows intended for use in “tough... [See More]
- Location / Orientation: Exterior; Interior
- Substrate: Glass
- Type: Coating
- Features: Weather Resistant
from Acoustical Solutions, Inc.
Sound Damping Compound is a water based damping compound for the treatment of vibrating metal, wood, glass, ceramic and most plastic surfaces. This material imparts vibration damping and a shift in the dominant frequency. The resulting structure borne noise reduction provides a means of improving... [See More]
- Location / Orientation: Exterior; Interior; Machinery
- Chemistry: Resin; Rubber
- Type: Coating; Sound Damping
- Substrate: Aluminum; Anodized; Ceramic; Glass; Metallic; Plastic; Steel; Wood
from Sanchem, Inc.
is the electrical contact grease of choice in new electrical installations and maintenance because of its excellent performance in keeping metals free from corrosion. This rust preventitive has been used for over 50 years to preventing corrosion in electrical connectors from low micro-power... [See More]
- Location / Orientation: Exterior
- Substrate: Concrete; Metallic
- Type: Coating; Primer; Rust Preventive Coating
- Cure / Setting Technology: Film Drying
from Chase Products Co.
Champion Sprayon ® Anti-Fog Plexiglass Cleaner makes cleaning easier and faster. Leaves a protective coating that repels dirt, dust, finger smudges, scratches and water spots. Contains no abrasives, silicones or ammonia. Foaming plexiglass cleaner and protectant. Does not contain ammonia,... [See More]
- Location / Orientation: Exterior; Interior
- Substrate: Other; Plexiglass
- Type: Coating
- Form: Aerosol
from Axalta Coating Systems, LLC
Axalta powder coatings offer a superb technology with benefits for many industrial applications. These products have earned a reputation for corrosion resistance and durability due to superior edge coverage, thick film build, and no primer required. With virtually zero levels of volatile organic... [See More]
- Location / Orientation: Exterior; Underground/Sub-Sea
- Chemistry: Epoxy (optional feature); Resin (optional feature); Metal Filled (optional feature); Silver
- Type: Coating; Powder Coating
- Cure / Setting Technology: Thermoplastic (optional feature)
from Sauereisen, Inc.
Sauereisen ConoThane Glaze provides outstanding gloss and color retention along with excellent resistance to abrasion and chemicals, including solvents. This product matches the performance of baked finishes and may be used on properly prepared and primed substrates of nearly any composition. [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Acrylic; Polyurethane; Resin
- Type: Coating; Clear Coat
- Substrate: Concrete; Metallic
from Dryvit UK
Acrylic coating for changing the colour of existing Dryvit finishes or use with Custom Brick. Dryvit ’s exterior coatings have been formulated to outperform traditional exterior paints. Based on high performance acrylic and silicone technologies these finishes are the ideal solution for... [See More]
- Location / Orientation: Exterior; Wall
- Chemistry: Acrylic; Resin
- Type: Coating; Paint
- Cure / Setting Technology: Film Drying
from Redwood Plastics
Wearlon Super F-4 is the hardest in the line of Wearlon coatings, improving abrasion resistance and prolonging the life of your propeller. It is a water based, environmentally friendly coating that can be painted or sprayed on. Wearlon Super F-4 is a non-stick foul release coating that minimizes... [See More]
- Location / Orientation: Exterior
- Substrate: Aluminum
- Type: Coating; Non-Stick Foul Release
- Cure / Setting Technology: Film Drying
from Rust-Oleum Corporation
Acrylic aliphatic urethane, high gloss, two component, gloss retention [See More]
- Location / Orientation: Exterior; Interior; Floor
- Chemistry: Acrylic; Polyurethane; Resin
- Type: Coating; Enamel; Base Coat
- Substrate: Aluminum; Concrete; Metallic; Steel
from AkzoNobel N.V.
AkzoNobel offers an innovative range of concrete repair and protection solutions that combine leading technical performance with simple application.Whether it is at the new construction phase, where flooring, waterproofing or defect resolution may be required, or repair and remediation of existing... [See More]
- Location / Orientation: Exterior
- Substrate: Concrete
- Type: Coating
from Kansai Paint (America), Inc.
PROTECTING BUILDINGS AND CREATING BEAUTIFUL EXTERIORS WITH EXCEPTIONAL FUNCTIONAL COATINGS FOR ARCHITECTURAL USE.Our building paints allow dirt to be washed away by rain water and also fill and expand into cracks in the wall caused by time-related degradation in order to prevent further damage by... [See More]
- Location / Orientation: Exterior
- Features: Protective
- Type: Coating; Paint (optional feature); Sealer (optional feature)
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Exterior primers assure superior hiding, topcoat appearance and long-lasting results. Commercial High-Performance Coatings. A comprehensive line-up of high-performance coatings... [See More]
- Location / Orientation: Exterior; Floor; Wall; Ceiling
- Chemistry: Acrylic; Alkyd; Resin
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
from Valspar Corporation (The)
Solid StainView stain colors. Total coverage gives maximum protection. VIEW PRODUCT DETAILS. Solid Color Acrylic Siding Stain. Solid Color Decking Stain. Semi-Solid StainView stain colors. Extra pigment adds longevity. VIEW PRODUCT DETAILS. Semi-Solid Siding and Fence. Semi-Solid Deck & Siding... [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Acrylic; Alkyd; Resin
- Type: Coating; Stain
- Substrate: Wood
from Columbia Chemical Corporation
EXTREME ® 110 is an economical process for plating brilliant, level, ductile zinc deposits in acid chloride zinc plating electrolytes using potassium chloride and boric acid (ammonia-free). EXTREME 110 additives promote superior bath solubility and higher temperature tolerance compared to... [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Zinc; Acid Chloride Zinc Plating
- Type: Coating; Zinc Plating
- Substrate: Steel
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®HS POLYURETHANE FLOOR ENAMEL is a heavy duty, two component, exterior/interior, low VOC, high solids, polyester-aliphatic urethane industrial floor coating. Provides a high gloss, excellent chemical resistance, color retention, and chalk resistance. Outstanding resistance a wide... [See More]
- Location / Orientation: Exterior; Interior; Floor
- Chemistry: Polyurethane; Resin
- Type: Coating; Enamel
- Substrate: Concrete; Steel; Other; Iron
from Dampney Company, Inc.
Elastoid 1300 is a single-package, high-build, elastomeric coating and vapor barrier. It is formulated from multiphase synthetic rubber copolymers which interact to provide an unusual range of desirable chemical and physical properties. It is tough, flexible, and corrosion-resistant and provides... [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Rubber
- Type: Coating
- Substrate: Aluminum; Concrete; Metallic; Steel
from Heresite Protective Coatings, LLC
Our 50 years of coating history speaks for itself. In 1964, Heresite was the first company to apply coatings to aluminum-finned, copper-tubed heat exchangers. The Heresite coating became then, and still remains a standard in the industrial coatings industry. We provide the highest quality protective... [See More]
- Location / Orientation: Exterior
- Chemistry: Resin; Formaldehyde Resins (Phenolic, Furan, Melamine)
- Type: Coating
- Substrate: Aluminum; Metallic; Steel
from Sanchem, Inc.
is a dry in place cleaner and conversion coating solution for use on iron, steel or zinc surfaces. When the surface reaction is complete the protected steel or iron becomes blue-black in color. This protective coating has excellent corrosion protection from the effects of hummidty and is an... [See More]
- Location / Orientation: Exterior
- Substrate: Metallic; Steel; Other; Zinc
- Type: Coating; Primer; Conversion Coating
- Cure / Setting Technology: Film Drying
from Chase Products Co.
Champion Sprayon ® Stainless Steel Cleaner, Polish and Protectant is a unique oil-in-water emulsion that quickly cleans, shines and protects without scratching. Heavy-duty cleaning agents and surfactants deep-clean, and remove smudges, soil, oil and grease stains, water marks and rust without... [See More]
- Location / Orientation: Exterior; Interior
- Substrate: Metallic; Steel
- Type: Coating
- Form: Aerosol
from Dryvit UK
An acrylic stain used in conjunction with Drytex Wood to give a natural wood effect appearance. [See More]
- Location / Orientation: Exterior; Wall
- Chemistry: Acrylic; Resin
- Type: Coating; Paint; Stain
- Cure / Setting Technology: Film Drying
from Redwood Plastics
Anti-Graffiti Wearlon ®. Put Scraping and Painting to an End. Our Wearlon ® Anti-Graffiti Coatings protects surfaces from graffiti vandals. An epoxy-silicone, three component, water-based, room temperature cure coating. The Wearlon coating with its slick surface resists spray paint,... [See More]
- Location / Orientation: Exterior
- Chemistry: Epoxy; Resin; Silicone
- Type: Coating; Anti-Graffiti
- Substrate: Metallic
from Rust-Oleum Corporation
Anti-slip one-step pedestrian grade, single component anti-slip coating [See More]
- Location / Orientation: Exterior; Interior; Floor
- Chemistry: Epoxy; Resin
- Type: Coating; Paint
- Substrate: Concrete
from AkzoNobel N.V.
Hammerite has a rich history. The name first appeared in 1962, when Allen Forster developed a hammered paint for use in electrical insulation. But Hammerite first appeared in the format we know today in 1984. It was launched to the UK DIY market as a single-pack, air-drying, corrosion-resistant... [See More]
- Location / Orientation: Exterior
- Substrate: Metallic
- Type: Coating; Paint
- Features: Corrosion Resistant; Protective
from Kansai Paint (America), Inc.
PROVIDING POWERFUL PROTECTION FOR SUBSTRATES WHILE MINIMIZING ENVIRONMENTAL IMPACTAs a pioneer in ultra-thick film epoxy resin coatings, Kansai Paint has released a heavy-duty anticorrosion coating that protects infrastructures from the dangers of a harsh natural environment. In addition, we have... [See More]
- Location / Orientation: Exterior
- Chemistry: Epoxy; Resin
- Type: Coating
- Features: Protective
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Exterior primers assure superior hiding, topcoat appearance and long-lasting results. Commercial High-Performance Coatings. A comprehensive line-up of high-performance coatings... [See More]
- Location / Orientation: Exterior; Floor; Wall; Ceiling
- Chemistry: Acrylic; Alkyd; Resin
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
from Columbia Chemical Corporation
COLZINC ® ACF-II is a process for alkaline cyanide-free zinc plating that produces brilliantly bright, and extremely ductile deposits. Its excellent low current density covering and throwing power make it especially suitable for steel parts with deep recesses such as fittings, tubes, or computer... [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Zinc; Alkaline Zinc Plating
- Type: Coating; Zinc Plating
- Substrate: Steel
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®REXTHANE I FLOOR COATING is a high solids, single component, aliphatic, moisture cure urethane, VOC complying, moisture resistant industrial floor coating. This urethane coating cures to a high gloss and chemical resistant film equivalent to two-part urethane coatings. Impact and... [See More]
- Location / Orientation: Exterior; Interior; Floor
- Chemistry: Polyurethane; Resin; Aliphatic
- Type: Coating; Clear Coat
- Substrate: Concrete; Steel; Wood; Other; Metalizing, Steel with Zinc
from Dampney Company, Inc.
Endcor 772 protects steel surfaces subjected to immersion in fresh or salt water, exposure in tidal or splash zones, or burial in soil. It is effective on the interiors of tanks and lines containing brine, crude oil, petroleum products, sewage or strong alkalies. It is resistant to a wide range of... [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Epoxy; Resin
- Type: Coating; Clear Coat
- Substrate: Metallic; Steel
from Chase Products Co.
These double-sided wipes are premoistened with a unique citrus-based formula designed to clean and polish stainless steel surfaces, while protecting them from the damaging effects of oxidation and corrosion. Each wipe is a dual-purpose engineered-cloth towel, with an abrasive (but non-scratching)... [See More]
- Location / Orientation: Exterior; Interior
- Substrate: Metallic; Steel
- Type: Coating
- Features: Corrosion Resistant; Protective
from Dryvit UK
100% acrylic-based finish with multi-colored quartz aggregates. [See More]
- Location / Orientation: Exterior; Wall
- Chemistry: Acrylic; Resin
- Type: Coating; Paint
- Cure / Setting Technology: Film Drying
from Redwood Plastics
Wearlon ® provides a non-stick coating that adds lubricity to nearly any surface to decrease build up and lower maintenance costs. Clean up is faster and easier. Super F-3M has tremendous water shedding properties and is spectacular in its hydrophobic properies, even approaching that which is... [See More]
- Location / Orientation: Exterior
- Cure / Setting Technology: Film Drying
- Type: Coating; Non-Stick
- Features: Waterproof; Non-stick
from Rust-Oleum Corporation
Industrial performance, zero VOC, zero HAP, odorless, single component [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Acrylic; Polyurethane; Resin
- Type: Enamel; Base Coat; Paint
- Substrate: Metallic; Steel
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Interior primers assure superior hiding, topcoat appearance and long-lasting results. Wood Stains, Sealers & Clear Topcoats. A wide variety of stains and sealers for... [See More]
- Location / Orientation: Exterior; Floor; Wall; Ceiling
- Chemistry: Acrylic; Alkyd; Resin
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
from Columbia Chemical Corporation
EXCEL ® 800 is cutting edge technology for producing acid chloride-like zinc deposit brightness from an alkaline cyanide-free zinc plating solution. Deposits are extremely ductile even at thickness over 25 microns (1 mil). EXCEL 800 is deal for both rack and barrel plating lines, and performs... [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Zinc; Alkaline Zinc Plating
- Type: Coating; Zinc Plating
- Substrate: Steel
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®TREAD-PLEX PRIMER is a general purpose, interior/exterior, VOC compliant, 100% acrylic, low odor, waterborne primer. One component. Water clean up. Fast dry. RECOMMENDED USAGE. For use over prepared concrete and wood floors, steps, stairwells, aisleways, or previously painted floor... [See More]
- Location / Orientation: Exterior; Interior; Floor
- Chemistry: Acrylic; Resin
- Type: Coating; Primer
- Substrate: Concrete; Wood
from Dampney Company, Inc.
Selective Black, silicone-based paint which collects heat more efficiently than ordinary black paint and resists out gassing to 400F. It is designed to selectively absorb wavelengths with the greatest heat content when used on the metal surfaces of collector panels having glazed covers. It collects... [See More]
- Location / Orientation: Exterior; Roof
- Chemistry: Resin; Silicone
- Type: Coating; Paint
- Substrate: Aluminum; Metallic; Steel; Other; Stainless Steel
from Chase Products Co.
CS+ Lubricant is a 4-way lube that stops annoying squeaks, guards against rust and corrosion, releases rusted or frozen metal parts with instant penetration, and removes moisture. It will displace water and moisture-proof all types of electrical equipment, relay switches, wet engines, distributors,... [See More]
- Location / Orientation: Exterior; Interior
- Substrate: Aluminum; Metallic; Steel
- Type: Coating
- Cure / Setting Technology: Multicomponent
from Dryvit UK
A premixed, 100% acrylic-based finish designed to replicate the appearance of limestone blocks. [See More]
- Location / Orientation: Exterior; Wall
- Chemistry: Acrylic; Resin
- Type: Coating; Paint
- Cure / Setting Technology: Film Drying
from Rust-Oleum Corporation
Clear, fast drying, oil modified, single component waterborne polyurethane [See More]
- Location / Orientation: Exterior; Interior; Floor
- Chemistry: Polyurethane; Resin
- Type: Coating; Clear Coat
- Substrate: Concrete; Wood
from Sherwin-Williams
Paint. Highly durable, high quality coatings designed for superior performance on all exterior substrates. Our low-temp formulas let you expand your season. Primers. Get beautiful, long-lasting results for your exterior surfaces. Primers "anchor" finish coats, level uneven areas, seal porous... [See More]
- Location / Orientation: Exterior; Wall; Ceiling
- Chemistry: Acrylic; Alkyd; Resin
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
from Columbia Chemical Corporation
COLCAD ® 100 is a brightener for cyanide cadmium plating for producing brilliant, ductile metal deposits over a wide current density range, and is suitable for both rack and barrel plating. COLCAD 100 is now the only Boeing approved cadmium brightener available for these applications. Under the... [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Zinc; Cyanide Cadmium Zinc Plating
- Type: Coating; Cadmium Plating
- Substrate: Steel
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®TREAD-PLEX is a general purpose, interior/ exterior, VOC compliant, 100% acrylic, low odor, waterborne floor coating. This dries rapidly to a tough, alkali resistant finish which will withstand hard wear, abrasion, grease, oils, and cleaning equipment. One component. Water clean up. [See More]
- Location / Orientation: Exterior; Interior; Floor; Steps, Stairwells, Aisleways
- Chemistry: Acrylic; Resin
- Type: Coating; Clear Coat
- Substrate: Concrete; Wood
from Chase Products Co.
Penetrating Oil and Demoisturant will displace water and moisture-proof all types of electrical equipment, even if the equipment is completely submerged. It saves production, maintenance and repair time, protects and preserves valuable equipment, waterproofs ignition systems, and protects metal... [See More]
- Location / Orientation: Exterior; Interior
- Substrate: Metallic
- Type: Coating
- Cure / Setting Technology: Multicomponent
from Dryvit UK
Architectural finish in the look of brick, stone, slate and tile for vertical surfaces. [See More]
- Location / Orientation: Exterior; Wall
- Chemistry: Resin
- Type: Coating; Paint
- Cure / Setting Technology: Film Drying
from Rust-Oleum Corporation
High heat resistance, two coat system for exterior heat exposure conditions [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Resin; Zinc; Metal Filled; Silicone
- Type: Coating; Base Coat; Paint
- Substrate: Metallic; Steel
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Exterior primers assure superior hiding, topcoat appearance and long-lasting results. Commercial High-Performance Coatings. A comprehensive line-up of high-performance coatings... [See More]
- Location / Orientation: Exterior; Floor; Wall; Ceiling
- Chemistry: Acrylic; Alkyd; Resin
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
from Columbia Chemical Corporation
MARQUEE ® ENVY MP is an ELV compliant, mid phosphorous, electroless nickel plating process. It contains no lead nor cadmium, and meets ASTM-B-733 and AMS2404 C specifications. Being a two component process, it is easy to use and has a 1:1 replenishment rate. It provides a deep, brilliant... [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Electroless Nickel Plating Solution
- Type: Coating; Electroless Nickel Deposit
- Substrate: Aluminum; Steel; Other; Brass
from Sherwin-Williams Protective & Marine Coatings
2K WATERBASED URETHANE ANTI-GRAFFITI COATING is a two component, low VOC, super-hydrophobic polyurethane. It provides excellent graffiti resistance, color and gloss retention. Low odor, Low VOC. Excellent anti-graffi ti resistance. Apply over multiple coating types. Brush, roll or spray. Waterbased... [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Polyurethane; Resin
- Type: Coating
- Cure / Setting Technology: Film Drying; Multicomponent
from Chase Products Co.
Silicone Lubricant frees sticking mechanisms, eliminates fan belt squeaks, metal-to-metal noises and rubber-to-metal squeaks. It repels water and ice and retards rust and corrosion, lubricates hinges and prevents freezing of exposed locks. Excellent for waterproofing ignition systems and other... [See More]
- Location / Orientation: Exterior; Interior
- Substrate: Metallic
- Type: Coating; Primer
- Cure / Setting Technology: Multicomponent
from Dryvit UK
Exterior and interior quartz aggregate finish. [See More]
- Location / Orientation: Exterior; Interior; Wall
- Chemistry: Resin
- Type: Coating; Paint
- Cure / Setting Technology: Film Drying
from Rust-Oleum Corporation
Modified silicone aluminum & colored finishes, high heat exposed surfaces [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Aluminum; Resin; Metal Filled; Silicone
- Type: Coating; Primer (optional feature); Clear Coat (optional feature); Paint
- Substrate: Metallic; Steel
from Columbia Chemical Corporation
Lac-Chro-SEAL ® is a non-hazardous lacquer coating for enhanced corrosion resistance on electroplated deposits and base metals. It air dries quickly to a very thin, clear & glossy finish which prevents fingerprints and provides significant protection to high humidity conditions. [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Acrylic; Zinc
- Type: Coating; Clear Coat; Lacquer; Sealer
- Substrate: Metallic; Other; Zinc & Zinc Alloy Deposits Over Steel
from Sherwin-Williams Protective & Marine Coatings
General Polymers 3477 EPOXY WATER EMULSION PRIMER/ SEALER is an economical sealer for concrete that will outperform water-based acrylic or acrylic/urethane sealers (chemical resistance and wear). Its low viscosity allows 3477 to flow smoothly, making it easy to spread. 3477 is suitable for... [See More]
- Location / Orientation: Exterior; Floor
- Chemistry: Epoxy; Resin
- Type: Coating; Primer; Sealer
- Substrate: Concrete; Wood
from Chase Products Co.
Silicone Mold Release Spray is a colorless, dry spray that reduces friction and buildup on molds without leaving an oily or greasy surface. Dries fast. Extends the life of equipment. Cuts cleanup time. This non-staining formula has a low surface tension and performs in temperatures from -47 °F... [See More]
- Location / Orientation: Exterior; Interior
- Substrate: Glass; Metallic; Wood; Other; Rubber
- Type: Coating
- Cure / Setting Technology: Multicomponent
from Dryvit UK
Flexible, elastomeric exterior finish. [See More]
- Location / Orientation: Exterior; Wall
- Chemistry: Resin; Rubber
- Type: Coating; Paint
- Cure / Setting Technology: Film Drying
from Rust-Oleum Corporation
15 oz Aerosol; Safety Blue; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Location / Orientation: Exterior; Interior
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Columbia Chemical Corporation
Zinc-Chro-SHIELD ® is a unique sealer for chromated zinc deposits which dramatically increases corrosion protection at very little additional cost. And since it's added to the final stagnant rinse at low concentrations (1% to 8% by volume), no additional equipment is required. Zinc-Chro-SHIELD... [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Zinc; Silicate Based
- Type: Coating; Sealer
- Substrate: Steel; Other; Zinc & Zinc Alloy Deposits Over Steel
from Sherwin-Williams Protective & Marine Coatings
Bond-Plex WB Acrylic is a single component, waterborne acrylic, adhesion promoting coating formulated for direct application to pre-finished metal siding. Suitable for interior or exterior use. Outstanding early moisture resistance. Outstanding exterior durability and gloss retention. Eliminates the... [See More]
- Location / Orientation: Exterior; Interior; Floor; Pre-Finished Metal Siding
- Chemistry: Acrylic; Aluminum; Resin; Metal Filled (optional feature)
- Type: Coating
- Substrate: Metallic; Other; Fluorocarbons, Silicone Polyesters
from Dryvit UK
Interior/exterior acrylic PMR coating in standard and custom colours. Dryvit ’s exterior coatings have been formulated to outperform traditional exterior paints. Based on high performance acrylic and silicone technologies these finishes are the ideal solution for refurbishment or new build. [See More]
- Location / Orientation: Exterior; Interior; Wall
- Chemistry: Acrylic; Resin
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Wood; Other; Stucco and Acrylic-Based Textured Finishes
from Rust-Oleum Corporation
15 oz Aerosol; Safety Yellow; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Location / Orientation: Exterior; Interior
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Columbia Chemical Corporation
COLDIP ® Satin Zinc 900 is a unique all "trivalent" chromate conversion coating for electroplated zinc that provides a uniform satin zinc finish, similar in appearance to satin nickel and satin silver. It is an easy-to-use one part system that provides 96 - 168 hours of neutral salt spray to... [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Conversion; Zinc
- Type: Coating; Chromates for Zinc Plating
- Substrate: Steel; Other; Zinc & Zinc Alloy Deposits Over Steel
from Sherwin-Williams Protective & Marine Coatings
Corothane ® II is a 2-component, VOC compliant, aliphatic acrylic modified polyurethane designed for use in industrial environments. A chemical and abrasion resistant urethane enamel. A heavy duty maintenance coating for use in "high visibility areas. RECOMMENDED USAGE. Use over prepared... [See More]
- Location / Orientation: Exterior; Handrails, Exterior Metal Siding
- Chemistry: Acrylic; Polyurethane; Resin; Aliphatic
- Type: Coating; Enamel
- Substrate: Aluminum; Concrete; Steel; Other; Iron, Galvanizing
from Dryvit UK
A coating used over Dryvit finishes that gives a pearlescent (metallic) appearance. [See More]
- Location / Orientation: Exterior; Wall
- Chemistry: Resin
- Type: Coating; Paint
- Cure / Setting Technology: Film Drying
from Rust-Oleum Corporation
15 oz, Aerosol Can; Red; Used with V2100 System Enamel Aerosol; for Corrosion Protection; Used on rusted, bare, or previously painted metal; Fast Dry; Temperatures up to 200°F; Enamel Primer [See More]
- Location / Orientation: Exterior; Interior
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Columbia Chemical Corporation
COLDIP ® TRI-V 120 is a high corrosion resistant "Trivalent Blue-Bright" chromate conversion coating for electroplated zinc, providing over 120 hours of neutral salt spray to white corrosion. It is approved by General Motors Worldwide under the GMW 3044 specification. [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Conversion; Zinc
- Type: Coating; Chromates for Zinc Plating
- Substrate: Steel; Other; Zinc & Zinc Alloy Deposits Over Steel
from Sherwin-Williams Protective & Marine Coatings
CUI is one of the costliest problems facing the hydrocarbon processing environment today. Infiltration by outside moisture or from the process environment through seams, gaps or other discontinuities in steel under insulation can lead to major equipment outages. Whether from periodic inspection and... [See More]
- Location / Orientation: Exterior; Coating Under Insulation
- Chemistry: Resin; Multi-Polymetric
- Type: Coating; Sealer; Coating Under Insulation
- Substrate: Metallic
from Dryvit UK
Ready to use polymer modified cementitious renders, used to create a brick effect finish. [See More]
- Location / Orientation: Exterior; Wall
- Chemistry: Resin
- Type: Coating; Paint
- Cure / Setting Technology: Film Drying
from Rust-Oleum Corporation
15 oz Aerosol; Flat Black; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Location / Orientation: Exterior; Interior
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Columbia Chemical Corporation
COLDIP ® TRI-V 121 is a high performance "Trivalent Blue-Bright" chromate conversion coating for electroplated zinc, providing over 175 hours of neutral salt spray to white corrosion. It is approved by General Motors Worldwide under the GMW 3044 specification. [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Conversion; Zinc
- Type: Coating; Chromates for Zinc Plating
- Substrate: Steel; Other; Zinc & Zinc Alloy Deposits Over Steel
from Sherwin-Williams Protective & Marine Coatings
The movement to produce, liquefy, store and transfer natural gas at sea brings to the forefront a new concern in the risk assessment stages of any floating liquefied natural gas (FLNG) project: how to protect the vessel and support structures from the catastrophic effects of a cryogenic LNG spill on... [See More]
- Location / Orientation: Exterior
- Chemistry: Epoxy; Resin
- Type: Coating; Sealer
- Substrate: Metallic
from Dryvit UK
Polymer modified cementitious render and acrylic stain used to create a wood effect finish. [See More]
- Location / Orientation: Exterior; Wall
- Chemistry: Resin
- Type: Coating; Paint; Stain
- Cure / Setting Technology: Film Drying
from Rust-Oleum Corporation
15 oz Aerosol; Gloss Black; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Location / Orientation: Exterior; Interior
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Columbia Chemical Corporation
SpectraMATE ® 25 is a high performance, thick-film trivalent conversion coating which passivates and protects electroplated zinc over steel parts. It produces a slightly iridescent, multicolor finish (hues of yellow, green, purple and pink) which consistently exceeds 250 hours of neutral salt... [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Conversion; Zinc
- Type: Coating; Chromates for Zinc Plating
- Substrate: Steel; Other; Zinc & Zinc Alloy Deposits Over Steel
from Sherwin-Williams Protective & Marine Coatings
Diamond-Clad ® CLEAR COAT URETHANE is a three component, graffiti resistant, low-VOC, acrylic polyurethane clear coat that enhances the finish and weathering properties of newly applied aliphatic urethane coatings. It exhibits excellent graffiti resistance and ease of application by brush or... [See More]
- Location / Orientation: Exterior; High Performance Applications
- Chemistry: Acrylic; Polyurethane; Resin
- Type: Coating; Clear Coat
- Substrate: Steel; Other; Previously Painted Surfaces
from Dryvit UK
Silicone facade paint. Dryvit ’s exterior coatings have been formulated to outperform traditional exterior paints. Based on high performance acrylic and silicone technologies these finishes are the ideal solution for refurbishment or new build. They are compatible with our texture finishes and... [See More]
- Location / Orientation: Exterior; Wall
- Chemistry: Resin; Silicone
- Type: Coating; Paint
- Substrate: Other; Mineral Substrates
from Rust-Oleum Corporation
15 oz Aerosol Can; Gray; Used with V2100 System Enamel Aerosol; for Corrosion Protection; Used on rusted, bare, or previously painted metal; Fast Dry; Temperatures up to 200°F; Enamel Primer [See More]
- Location / Orientation: Exterior; Interior
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Columbia Chemical Corporation
TRIVECTA ® Black 300 is a black trivalent chromate for zinc plated parts. It produces a thick film ( >400nm), uniform gloss-black, scratch-resistant finish, and works well over all types of zinc deposits. TRIVECTA Black 300 provides a finish that consistently exceeds 120+ hours of neutral... [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Conversion; Zinc
- Type: Coating; Chromates for Zinc Plating
- Substrate: Steel; Other; Zinc & Zinc Alloy Deposits Over Steel
from Sherwin-Williams Protective & Marine Coatings
Diamond-Clad ® WB CLEAR COAT WATERBASED URETHANE is a three component, graffiti resistant, low-VOC, waterbased acrylic polyurethane clear coat that enhances the finish and weathering properties of newly applied aliphatic urethane coatings. It exhibits high gloss, excellent graffiti resistance,... [See More]
- Location / Orientation: Exterior
- Chemistry: Acrylic; Polyurethane; Resin
- Type: Coating; Clear Coat
- Substrate: Steel; Other; Previously Painted Surfaces
from Dryvit UK
Proprietary, silicone-based nanotechnology coating that promotes hydrophobicity enhancing reduced dirt pick up properties. Dryvit ’s exterior coatings have been formulated to outperform traditional exterior paints. Based on high performance acrylic and silicone technologies these finishes are... [See More]
- Location / Orientation: Exterior; Wall
- Chemistry: Resin; Silicone
- Type: Coating; Paint
- Cure / Setting Technology: Film Drying
from Rust-Oleum Corporation
15 oz Aerosol; Dark Machine Gray; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Location / Orientation: Exterior; Interior
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Columbia Chemical Corporation
COLLOY ® NI-Z-POSIT is a process for plating a zinc/nickel alloy from an alkaline cyanide-free zinc plating solution. The resulting alloy deposit which contains 10% to 15% nickel, is evenly distributed at low, mid and high current densities, and provides greatly enhanced corrosion resistance... [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Zinc; Alkaline Zinc Nickel
- Type: Coating; Zinc Nickel Plating
- Substrate: Steel
from Sherwin-Williams Protective & Marine Coatings
DTM ACRYLIC COATING is a 100% acrylic, water reducible, corrosion resistant coating for light to moderate industrial use. Designed for new construction or maintenance use and can be used directly over prepared substrates. Chemical resistant. Corrosion resistant. Fast dry. Low odor. Flash rust/early... [See More]
- Location / Orientation: Exterior; Interior; Wall; High Performance Applications
- Chemistry: Acrylic; Resin
- Type: Coating
- Substrate: Aluminum; Concrete; Steel; Wood; Other; Galvanizing, Drywall, Zinc Rich Primers
from Dryvit UK
A tintable acrylic stain that can be applied to acrylic or elastomeric finishes, providing an 'old world' or 'antique' look. [See More]
- Location / Orientation: Exterior; Wall
- Chemistry: Acrylic; Resin
- Type: Coating; Paint; Stain
- Cure / Setting Technology: Film Drying
from Rust-Oleum Corporation
15 oz Aerosol; Gloss White; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Location / Orientation: Exterior; Interior
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Columbia Chemical Corporation
COLPHOS ® Zn 35 is a liquid, immersion zinc phosphate used to produce fine grain crystalline heavyweight coatings (1000 - 5000 mg/ft2) on steel surfaces while generating minimal sludge. It meets the requirements of ASTM F1137, MIL-DTL-16232G TYPE Z and A-A59267, provides excellent absorbing... [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Conversion; Zinc
- Type: Coating; Primer; Heavy Zinc Phosphate
- Substrate: Steel
from Sherwin-Williams Protective & Marine Coatings
DTM ACRYLIC PRIMER/FINISH is a 100% acrylic emulsion, waterborne, corrosion resistant coating for both new construction and industrial maintenance applications. It can be used as a primer under most water based topcoats or alone as a primer/topcoat system. It can be used directly over multipe... [See More]
- Location / Orientation: Exterior; High Performance Applications; Ceiling
- Chemistry: Acrylic; Resin
- Type: Coating; Primer; Clear Coat
- Substrate: Aluminum; Concrete; Steel; Other; Zinc Rich Primers, Galvanizing
from Dryvit UK
A trowel-applied stone finish that simulates cut stone and granite. [See More]
- Location / Orientation: Exterior; Wall
- Chemistry: Resin
- Type: Coating; Paint
- Cure / Setting Technology: Film Drying
from Rust-Oleum Corporation
Fast drying, multi-purpose, modified-alkyd enamel aerosol, indoor/outdoor [See More]
- Location / Orientation: Exterior; Interior
- Chemistry: Alkyd; Resin
- Type: Coating; Enamel; Base Coat; Paint
- Substrate: Metallic; Steel
from Sherwin-Williams Protective & Marine Coatings
SherPlate PW Epoxy. SherPlate PW Epoxy is an edge retentive, ultra high solids epoxyamine coating engineered for immersion service in potable water pipes and storage tanks. The rapid return to service and high build, edge retentive properties of this coating provide superior protection. One or two... [See More]
- Location / Orientation: Exterior
- Chemistry: Epoxy; Resin
- Type: Coating
- Substrate: Concrete; Metallic; Steel
from Dryvit UK
Flexible, waterproof elastomeric exterior coating. Dryvit ’s exterior coatings have been formulated to outperform traditional exterior paints. Based on high performance acrylic and silicone technologies these finishes are the ideal solution for refurbishment or new build. They are compatible... [See More]
- Location / Orientation: Exterior; Wall
- Chemistry: Resin; Rubber
- Type: Coating; Paint
- Substrate: Concrete; Other; EIFS and Stucco Substrates
from Rust-Oleum Corporation
12 oz Aerosol Can; Safety Blue; 12 min to Tack-free Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; Premium brand from Rustoleum; Multipurpose Paint [See More]
- Location / Orientation: Exterior; Interior
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying