Machine Tools Industrial Coatings
from FORREST Technical Coatings
An industrial-grade, two-component acrylic polyurethane designed to provide added chemical and resistance with a satin gloss and textured appearance. Catalyst available for either interior or exterior use. [See More]
- Industry: Machine Tools; Marine; OEM / Industrial; Process Equipment
- Chemistry: Alkyd; Polyurethane; Resin
- Type: Coating; Clear Coat; Paint
- Substrate: Aluminum; Ceramic; Metallic; Plastic; Steel; Other; Fiberglass
from Master Bond, Inc.
Master Bond Polymer System EP30-1 is a low viscosity, two component epoxy compound for high performance fiber optics bonding, coating, potting and encapsulation formulated to cure at room temperature or more rapidly at elevated temperatures, with a four (4) to one (1) mix ratio by weight. This... [See More]
- Industry: Automotive; Electronics; Machine Tools; Marine; OEM / Industrial
- Chemistry: Epoxy; Resin
- Type: Coating
- Substrate: Ceramic; Concrete; Glass; Metallic; Plastic; Wood
from AGC Chemicals Americas, Inc.
Melt processable copolymers composed of tetrafluoroethylene and ethylene, Fluon ® ETFE Resins offer superior physical toughness and adaptability to meet the ranging needs of simple, high-quality, complicated and even high-performance products. The fluoropolymers maintain stable mechanical and... [See More]
- Industry: Food / Beverage; Machine Tools; OEM / Industrial; Process Equipment
- Chemistry: Fluoropolymers; Resin
- Type: Coating; Powder Coating
- Cure / Setting Technology: Thermoplastic
from Everlube Products
Ever-Slik 1221 is a thermally cured, specially blended high molecular weight phenolic based coating which provides outstanding corrosion resistance in almost any environment. This coating provides excellent chemical and corrosion resistance, and is ideal for applications where abrasion resistance is... [See More]
- Industry: Automotive; Machine Tools; Mil-Spec; OEM / Industrial
- Chemistry: Resin; Formaldehyde Resins (Phenolic, Furan, Melamine)
- Type: Coating
- Substrate: Metallic; Steel
from FORREST Technical Coatings
A corrosion-resistant polyamide epoxy primer for use under high performance fast-dry topcoats. [See More]
- Industry: Machine Tools; Marine; OEM / Industrial; Process Equipment
- Chemistry: Epoxy; Resin
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Steel
from FORREST Technical Coatings
An electrostatic developed specifically to minimize the electrostatic discharge (ESD) created when two surfaces with different voltages meet one another. When properly applied these coatings can prevent significant damage caused by electrostatic discharge. [See More]
- Industry: Electronics; Machine Tools; Medical; OEM / Industrial; Process Equipment
- Substrate: Metallic; Plastic; Steel
- Type: Coating; Powder Coating; Paint
- Cure / Setting Technology: Thermoset
from FORREST Technical Coatings
Standard polyester TGIC powders are excellent coatings that protect the end product while also providing many decorative colors and special effects looks at the same time. These products can be used for interior or exterior applications. Variety of gloss levels and textures available. [See More]
- Industry: Machine Tools; OEM / Industrial; Process Equipment
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
- Type: Coating; Powder Coating; Paint
- Cure / Setting Technology: Thermoset
from FORREST Technical Coatings
Polyurethane coatings are formulated to have excellent flow characteristics while providing good mechanical and chemical resistance. These products also offer exterior durability. [See More]
- Industry: Machine Tools; OEM / Industrial; Process Equipment
- Chemistry: Polyurethane; Resin; Polyester
- Type: Coating; Powder Coating; Paint
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
from FORREST Technical Coatings
A fast-drying universal phenolic modified alkyd primer with non-lifting properties. Rust-inhibitive pigments provide excellent corrosion prevention and good weathering characteristics for protection during storage, transit or construction. Appropriate for use on interior or exterior steel substrates... [See More]
- Industry: Machine Tools; OEM / Industrial; Process Equipment
- Chemistry: Alkyd; Resin; Formaldehyde Resins (Phenolic, Furan, Melamine)
- Type: Coating; Primer; Base Coat; Paint
- Substrate: Metallic; Steel
from FORREST Technical Coatings
FORREST two-part epoxy coatings provide excellent solvent and corrosion resistance for industrial applications. Ideal for areas where a higher level of performance is required for chemical or solvent exposure. [See More]
- Industry: Machine Tools; OEM / Industrial; Process Equipment
- Chemistry: Epoxy; Resin
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Steel
from FORREST Technical Coatings
Powder coating is a versatile technology for use on multiple substrates and in multiple applications with the added benefit of low emissions. Available in both TGIC-free and low cure options, our product catalog includes metallic, veins, textures and crinkle effects. [See More]
- Industry: Machine Tools; OEM / Industrial; Process Equipment
- Chemistry: Polyurethane; Resin
- Type: Coating; Powder Coating; Paint
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
from FORREST Technical Coatings
FORREST Industrial Enamels are easy to apply industrial coatings in low-VOC, HAPS compliant, water-based, quick-dry, and solvent-based formulations. All are available as single-component finishes for interior or exterior use. Available in aerosols for touch-up and industrial maintenance. [See More]
- Industry: Machine Tools; OEM / Industrial; Process Equipment
- Chemistry: Alkyd; Resin
- Type: Coating; Clear Coat; Paint
- Substrate: Metallic; Steel
from FORREST Technical Coatings
Rust-inhibitive barrier coatings for use on interior or exterior steel substrates and compatible with various top coats. These versatile primers are recommended for use on machinery, structural steel, agricultural equipment and fabricated metals. Most products are available in standard white, red... [See More]
- Industry: Machine Tools; OEM / Industrial; Process Equipment
- Substrate: Metallic; Steel
- Type: Coating; Primer; Base Coat; Paint
- Cure / Setting Technology: Film Drying
from Sherwin-Williams
It takes more than a coating to create an exceptional finish, which is why Sherwin-Williams provides OEMs with complete finishing solutions. Across both markets and continents, we help our customers be more efficient, innovative, and highly valued with customized technology and service solutions... [See More]
- Industry: Electronics; Machine Tools; Mil-Spec; OEM / Industrial
- Chemistry: Resin
- Type: Coating; Powder Coating
- Substrate: Metallic; Plastic; Wood
from Chase Products Co.
Cold Galvanizing 95 is a complete zinc metal spray which rustproofs any metal surface with thorough protection that lasts for years. It is equivalent to a hot galvanizing treatment as it fuses and adheres to all metal surfaces, stopping corrosion immediately. Zinc used in this product is 95% pure. [See More]
- Industry: Automotive; Machine Tools; Marine; OEM / Industrial
- Chemistry: Zinc; Metal Filled
- Type: Coating
- Substrate: Aluminum; Metallic; Steel
from Aervoe Industries Incorporated
Neutralizes static electricity, inhibits airborne dust accumulation [See More]
- Industry: Machine Tools
- Chemistry: Fatty Alcohol Phosphate
- Type: Coating
- Substrate: Aluminum; Metallic; Plastic; Other; Tile, Foils, Cellophane
from Rust-Oleum Corporation
15 oz Aerosol; Safety Blue; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Industry: Automotive; Machine Tools; OEM / Industrial; Process Equipment
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Columbia Chemical Corporation
MARQUEE ® ENVY MP is an ELV compliant, mid phosphorous, electroless nickel plating process. It contains no lead nor cadmium, and meets ASTM-B-733 and AMS2404 C specifications. Being a two component process, it is easy to use and has a 1:1 replenishment rate. It provides a deep, brilliant... [See More]
- Industry: Automotive; Electronics; Machine Tools; Marine; Mil-Spec; OEM / Industrial; Process Equipment
- Chemistry: Electroless Nickel Plating Solution
- Type: Coating; Electroless Nickel Deposit
- Substrate: Aluminum; Steel; Other; Brass
from Sherwin-Williams Protective & Marine Coatings
General Polymers 3524 EPOXY CONDUCTIVE PRIMER / SEALER is a black, two component polyamide epoxy designed as a primer for conductive or static dissipative coatings, slurry and mortar systems. RECOMMENDED USAGE. 3524 EPOXY CONDUCTIVE PRIMER / SEALER provides exceptional resistance to wear, abrasion... [See More]
- Industry: Electronics; Machine Tools
- Chemistry: Epoxy; Resin; Polyamide
- Type: Coating; Primer; Sealer
- Substrate: Concrete
from Chase Products Co.
CS+ Lubricant is a 4-way lube that stops annoying squeaks, guards against rust and corrosion, releases rusted or frozen metal parts with instant penetration, and removes moisture. It will displace water and moisture-proof all types of electrical equipment, relay switches, wet engines, distributors,... [See More]
- Industry: Automotive; Machine Tools; OEM / Industrial
- Substrate: Aluminum; Metallic; Steel
- Type: Coating
- Cure / Setting Technology: Multicomponent
from Rust-Oleum Corporation
15 oz Aerosol; Safety Yellow; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Industry: Automotive; Machine Tools; OEM / Industrial; Process Equipment
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
DTM ACRYLIC COATING is a 100% acrylic, water reducible, corrosion resistant coating for light to moderate industrial use. Designed for new construction or maintenance use and can be used directly over prepared substrates. Chemical resistant. Corrosion resistant. Fast dry. Low odor. Flash rust/early... [See More]
- Industry: Machine Tools; Marine; OEM / Industrial
- Chemistry: Acrylic; Resin
- Type: Coating
- Substrate: Aluminum; Concrete; Steel; Wood; Other; Galvanizing, Drywall, Zinc Rich Primers
from Chase Products Co.
Penetrating Oil and Demoisturant will displace water and moisture-proof all types of electrical equipment, even if the equipment is completely submerged. It saves production, maintenance and repair time, protects and preserves valuable equipment, waterproofs ignition systems, and protects metal... [See More]
- Industry: Automotive; Machine Tools; OEM / Industrial
- Substrate: Metallic
- Type: Coating
- Cure / Setting Technology: Multicomponent
from Rust-Oleum Corporation
15 oz, Aerosol Can; Red; Used with V2100 System Enamel Aerosol; for Corrosion Protection; Used on rusted, bare, or previously painted metal; Fast Dry; Temperatures up to 200°F; Enamel Primer [See More]
- Industry: Automotive; Machine Tools; OEM / Industrial; Process Equipment
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
HI-SOLIDS POLYURETHANE HS is a two-component, low VOC, aliphatic, acrylic polyurethane resin coating. It is designed for high performance protection with outstanding exterior gloss and color retention. Good/excellent resistance to corrosion and weathering. Outstanding color and gloss retention. [See More]
- Industry: Machine Tools; Marine; OEM / Industrial
- Chemistry: Acrylic; Polyurethane; Resin; Aliphatic
- Type: Coating
- Substrate: Aluminum; Concrete; Steel; Other; Iron, Galvanizing
from Chase Products Co.
Silicone Lubricant frees sticking mechanisms, eliminates fan belt squeaks, metal-to-metal noises and rubber-to-metal squeaks. It repels water and ice and retards rust and corrosion, lubricates hinges and prevents freezing of exposed locks. Excellent for waterproofing ignition systems and other... [See More]
- Industry: Automotive; Machine Tools; OEM / Industrial
- Substrate: Metallic
- Type: Coating; Primer
- Cure / Setting Technology: Multicomponent
from Rust-Oleum Corporation
15 oz Aerosol; Flat Black; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Industry: Automotive; Machine Tools; OEM / Industrial; Process Equipment
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
HI-SOLIDS POLYURETHANE 100 is a two-component, less than 100 g/l VOC, aliphatic, acrylic polyurethane enamel. It is designed for high performance protection with outstanding exterior gloss and color retention. Good/excellent resistance to corrosion and weathering. Outstanding color and gloss... [See More]
- Industry: Machine Tools; Marine; OEM / Industrial
- Chemistry: Acrylic; Polyurethane; Resin; Aliphatic
- Type: Coating; Enamel
- Substrate: Concrete; Steel; Other; Iron, Galvanizing
from Chase Products Co.
Silicone Mold Release Spray is a colorless, dry spray that reduces friction and buildup on molds without leaving an oily or greasy surface. Dries fast. Extends the life of equipment. Cuts cleanup time. This non-staining formula has a low surface tension and performs in temperatures from -47 °F... [See More]
- Industry: Machine Tools; OEM / Industrial
- Substrate: Glass; Metallic; Wood; Other; Rubber
- Type: Coating
- Cure / Setting Technology: Multicomponent
from Rust-Oleum Corporation
15 oz Aerosol; Gloss Black; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Industry: Automotive; Machine Tools; OEM / Industrial; Process Equipment
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
Industrial Urethane Alkyd Enamel is a high solids, high gloss, 2.8 lb/gal VOC compliant coating intended for interior/exterior use in industrial environments. It is easy to brush, roll or spray. Provides performance comparable to Silicone Alkyds. Modified with urethane resin for increased durability... [See More]
- Industry: Machine Tools; OEM / Industrial
- Chemistry: Alkyd; Polyurethane; Resin
- Type: Coating; Enamel
- Substrate: Aluminum; Concrete; Metallic; Steel; Wood; Other; Iron, Galvanizing
from Rust-Oleum Corporation
15 oz Aerosol Can; Gray; Used with V2100 System Enamel Aerosol; for Corrosion Protection; Used on rusted, bare, or previously painted metal; Fast Dry; Temperatures up to 200°F; Enamel Primer [See More]
- Industry: Automotive; Machine Tools; OEM / Industrial; Process Equipment
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
KEM ® 4000 is a high solids, gloss, VOC-compliant, general purpose acrylic alkyd enamel coating intended for industrial applications. It is ideal for interior or exterior applications, the refinishing of industrial, construction, and agricultural equipment, as well as a wide range of general... [See More]
- Industry: Machine Tools; OEM / Industrial
- Chemistry: Acrylic; Alkyd; Resin
- Type: Coating; Enamel
- Substrate: Aluminum; Metallic; Steel; Other; Iron, Galvanizing
from Rust-Oleum Corporation
15 oz Aerosol; Dark Machine Gray; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Industry: Automotive; Machine Tools; OEM / Industrial; Process Equipment
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
KEM ® Kromik ® UNIVERSAL METAL PRIMER is a rust inhibiting, low VOC, modified alkyd resin primer designed for use over iron and steel substrates. Can be used as a "universal" primer under high performance topcoats and is also suitable as a "barrier" coat over conventional coatings which... [See More]
- Industry: Machine Tools; Marine; OEM / Industrial
- Chemistry: Alkyd; Resin; Formaldehyde Resins (Phenolic, Furan, Melamine)
- Type: Coating; Primer
- Substrate: Metallic; Steel; Other; Iron
from Rust-Oleum Corporation
15 oz Aerosol; Gloss White; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Industry: Automotive; Machine Tools; OEM / Industrial; Process Equipment
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
POLYLON HP POLYURETHANE is a high performance, high solids two component, exterior/interior, low VOC, polyesteraliphatic urethane coating. Provides a high gloss, excellent chemical resistance, color retention, and chalk resistance. Outstanding resistance to a wide range of chemical, weather, and... [See More]
- Industry: Machine Tools; Marine; OEM / Industrial
- Chemistry: Polyurethane; Resin; Aliphatic
- Type: Coating
- Substrate: Aluminum; Concrete; Steel; Other; Iron, Galvanizing
from Rust-Oleum Corporation
12 oz Aerosol Can; Safety Blue; 12 min to Tack-free Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; Premium brand from Rustoleum; Multipurpose Paint [See More]
- Industry: Machine Tools; OEM / Industrial; Process Equipment
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
Corothane ® I MIO-ALUMINUM is a single component, VOC compliant, moisture curing, aluminum and Micaceous Iron Oxide (MIO) filled, urethane primer, intermediate coating, or finish. It has excellent surface wetting properties and provides extended recoatability. Excellent adhesion to most... [See More]
- Industry: Machine Tools; Marine; OEM / Industrial
- Chemistry: Aluminum; Polyurethane; Resin; Aluminum & Micaceous Iron Oxide; Metal Filled
- Type: Coating; Primer; Clear Coat
- Substrate: Aluminum; Concrete; Plastic; Steel; Other; Iron, Galvanizing
from Sherwin-Williams Protective & Marine Coatings
Pro Industrial ™ INDUSTRIAL ENAMEL 100 is a high solids, less than 100 g/L VOC, alkyd, gloss topcoat. It is easy to apply by brush, roll, or spray and is intended for interior/exterior use in industrial and commercial applications. Chip and flake resistant. Abrasion resistant. Exterior and... [See More]
- Industry: Machine Tools; Marine; OEM / Industrial
- Chemistry: Alkyd; Resin
- Type: Coating; Enamel; Clear Coat
- Substrate: Aluminum; Concrete; Metallic; Steel; Wood; Other; Iron, Galvanizing, Drywall