Rubber / Elastomer Based Industrial Coatings
from Master Bond, Inc.
Master Bond Polymer Systems X5N Nickel, X5G Graphite and X5SC Silver are novel, highly cost effective one component electrically conductive elestomer based adhesive/sealants for EMI/RFI shielding and related applications. They offer superior shielding over a wide frequency range, superior... [See More]
- Chemistry: Resin; Rubber
- Operating Temperature: -80 to 300
- Type: Coating
- Form: Liquid
from Master Bond, Inc.
Master Bond Polymer System UV15-7SP4 is a new one component, optically clear, toughened UV and/or curable polymer system with extended service capability of -80 °F to +250 °F. It is 100% reactive, does not contain any solvents or other volatiles and does not embrittle even upon exposure to... [See More]
- Chemistry: Resin; Rubber
- Substrate: Ceramic; Glass; Metallic; Plastic; Wood; Other
- Type: Coating
- Cure / Setting Technology: Ultraviolet Light Curing
from Master Bond, Inc.
Master Bond UV15FL is a new one component, high strength, low viscosity, flexible UV curable epoxy resin based polymer system for bonding, sealing, & coating with exceptionally high performance properties. It is a 100% reactive and does not contain any solvents or other volatiles. When exposed... [See More]
- Chemistry: Epoxy; Resin; Rubber
- Substrate: Ceramic; Glass; Metallic; Plastic; Wood; Other
- Type: Coating
- Cure / Setting Technology: Ultraviolet Light Curing
from Crosslink
In a world threatened by harmful chemical and biological agents (CBAs), detoxification solutions become very important to the well-being of individuals and military personnel on the battlefield. Traditional approaches to decontamination are equipment washdown with neutralizing solutions and water,... [See More]
- Chemistry: Rubber
- Features: Conductive; Self-Detoxification Coating
- Type: Coating; Self-Detoxification Coating
from Sauereisen, Inc.
ConoFlex Membrane No. 520 is a flexibile elastomeric polyurethane combining toughness, flexibility and elongation. Typical uses would be as a flexible membrane under a chemical-resistant coating or lining for existing or anticipated substrate cracking or primary/secondary containment structures... [See More]
- Chemistry: Polyurethane; Resin; Rubber
- Substrate: Concrete
- Type: Coating; Primer; Base Coat
- Cure / Setting Technology: Multicomponent
from Sekisui Voltek, LLC
Our Volextra process is an extremely flexible extrusion coating capability. Using state of the art technology, solid plastic is permanently melt bonded to our Volara ® foams. Polyolefin based coatings can be engineered to match your design needs, in a range of thicknesses from 0.0015" to 0.055". [See More]
- Chemistry: Rubber
- Cure / Setting Technology: Thermoplastic
- Type: Coating
- Thickness: 0.0015 to 0.0550
from Berry Plastics Corporation - Engineered Materials Division
Polyken 1027. LIQUID ADHESIVE/PRIMER. Polyken 1027 liquid adhesive system is ideal for slower machine application to rough, reconditioned, or grit-blasted pipe surfaces. It provides a uniformly smooth, instant tack surface for Polyken coating systems. Applications. Solvent based primer designed for... [See More]
- Chemistry: Resin; Rubber
- Substrate: Concrete; Metallic; Steel; Wood
- Type: Coating; Primer
- Cure / Setting Technology: Film Drying
from Wacker Chemical Corp.
ELASTOSIL ® LR 6239 F is a free-flowing additioncuring. silicone rubber, which is mixed with crosslinker. to form a ready-to-use product with long pot life which cures rapidly at high temperatures. Special features. solvent-free. processing viscosity suitable for silk-screen printing. long term... [See More]
- Chemistry: Resin; Rubber; Silicone
- Substrate: Metallic
- Type: Coating; Sealer
- Cure / Setting Technology: Multicomponent; Additive Cured
from Acoustical Solutions, Inc.
Sound Damping Compound is a water based damping compound for the treatment of vibrating metal, wood, glass, ceramic and most plastic surfaces. This material imparts vibration damping and a shift in the dominant frequency. The resulting structure borne noise reduction provides a means of improving... [See More]
- Chemistry: Resin; Rubber
- Substrate: Aluminum; Anodized; Ceramic; Glass; Metallic; Plastic; Steel; Wood
- Type: Coating; Sound Damping
- Cure / Setting Technology: Thermoset
from Dampney Company, Inc.
Elastoid 1300 is a single-package, high-build, elastomeric coating and vapor barrier. It is formulated from multiphase synthetic rubber copolymers which interact to provide an unusual range of desirable chemical and physical properties. It is tough, flexible, and corrosion-resistant and provides... [See More]
- Chemistry: Rubber
- Substrate: Aluminum; Concrete; Metallic; Steel
- Type: Coating
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
EnviroLastic ® AR BRUSH GRADE SS is a 100% solids, fluid applied, slow set polyurea elastomer repair material that is based on proprietary polyurea formulation and a modified amine curing mechanism. It can be applied at thicknesses of 30 - 250 mils in consecutive multiple applications. Long pot... [See More]
- Chemistry: Resin; Rubber; Modified Amine
- Substrate: Concrete; Steel
- Type: Coating; Repair Material
- Cure / Setting Technology: Multicomponent
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Rubber
- Type: Coating
from Owens Corning® FOAMGLAS® Insulation
A low temperature anti-abrasive (LTAA) coating that reduces abrasion from vibrating piping or equipment by providing a durable bore coating to insulation substrates across a wide range of service temperatures. Product is idea for application to FOAMGLAS ® insulation blocks, curved segments... [See More]
- Chemistry: Rubber
- Substrate: Other; Insulation
- Type: Coating
- Cure / Setting Technology: Film Drying
from U.S. Plastic Corporation
Dip-It-Yourself compound-make your own plastic grips for your tools. This coats metal, wood, glass, rubber, foam, and plastics. It does not chip or peel. It is an excellent application for tools because it gives more gripping power, insulates and serves to identify ownership. It can be used to coat... [See More]
- Chemistry: Rubber
- Form: Aerosol
- Type: Coating
from Dryvit UK
Flexible, elastomeric exterior finish. [See More]
- Chemistry: Resin; Rubber
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint
- Form: Liquid
from Owens Corning® FOAMGLAS® Insulation
PITTSTOP ™ 196 Vapor Stop is a two component, butyl rubber elastomer specially designed for use in FOAMGLAS ® insulation systems. Its service temperature range is specifically suited for Liquid Natural Gas and other cryogenic insulation systems. U.S. Stock Item. Available in standard two... [See More]
- Chemistry: Rubber
- Thickness: 0.0551 to 0.0630
- Type: Coating
- Operating Temperature: -320 to 250
from U.S. Plastic Corporation
Dip-It-Yourself compound-make your own plastic grips for your tools. This coats metal, wood, glass, rubber, foam, and plastics. It does not chip or peel. It is an excellent application for tools because it gives more gripping power, insulates and serves to identify ownership. It can be used to coat... [See More]
- Chemistry: Rubber
- Type: Coating
from Dryvit UK
Flexible, waterproof elastomeric exterior coating. Dryvit ’s exterior coatings have been formulated to outperform traditional exterior paints. Based on high performance acrylic and silicone technologies these finishes are the ideal solution for refurbishment or new build. They are compatible... [See More]
- Chemistry: Resin; Rubber
- Substrate: Concrete; Other; EIFS and Stucco Substrates
- Type: Coating; Paint
- Cure / Setting Technology: Film Drying
from U.S. Plastic Corporation
Dip-It-Yourself compound-make your own plastic grips for your tools. This coats metal, wood, glass, rubber, foam, and plastics. It does not chip or peel. It is an excellent application for tools because it gives more gripping power, insulates and serves to identify ownership. It can be used to coat... [See More]
- Chemistry: Rubber
- Type: Coating
from U.S. Plastic Corporation
Dip-It-Yourself compound-make your own plastic grips for your tools. This coats metal, wood, glass, rubber, foam, and plastics. It does not chip or peel. It is an excellent application for tools because it gives more gripping power, insulates and serves to identify ownership. It can be used to coat... [See More]
- Chemistry: Rubber
- Form: Aerosol
- Type: Coating