Resin Base / Polymer Binder Industrial Coatings
from AGC Chemicals Americas, Inc.
Melt processable copolymers composed of tetrafluoroethylene and ethylene, Fluon ® ETFE Resins offer superior physical toughness and adaptability to meet the ranging needs of simple, high-quality, complicated and even high-performance products. The fluoropolymers maintain stable mechanical and... [See More]
- Chemistry: Fluoropolymers; Resin
- Cure / Setting Technology: Thermoplastic
- Type: Coating; Powder Coating
- Cure Temperature: 340
from FORREST Technical Coatings
An industrial-grade, two-component acrylic polyurethane designed to provide added chemical and resistance with a satin gloss and textured appearance. Catalyst available for either interior or exterior use. [See More]
- Chemistry: Alkyd; Polyurethane; Resin
- Substrate: Aluminum; Ceramic; Metallic; Plastic; Steel; Other; Fiberglass
- Type: Coating; Clear Coat; Paint
- Cure / Setting Technology: Film Drying; Multicomponent
from Master Bond, Inc.
Master Bond UV11-3 is an extra-hard, super-abrasion resist-radiation curable coating system for plastic substrates. It is a low viscosity, clear, 100% reactive liquid that can be cured readily by exposure to UV lamps or EB radiation. The cure can be effected in air or under an inert atmosphere such... [See More]
- Chemistry: Resin
- Substrate: Ceramic; Glass; Metallic; Plastic; Wood; Other
- Type: Coating
- Cure / Setting Technology: Ultraviolet Light Curing
from Everlube Products
Ever-Slik 1201 is a thermally cured, specially blended epoxy based coating which provides outstanding corrosion resistance in almost any environment. Along with its excellent corrosion resistance, Ever-Slik 1201 is ideal for applications where an abrasion resistant coating is needed. Ever-Slik 1201... [See More]
- Chemistry: Epoxy; Resin
- Substrate: Metallic; Steel
- Type: Coating
- Cure / Setting Technology: Thermally Cured
from Victrex PLC
VICOTE 701-707 grades are specially developed powder coatings. They are available in various average particle sizes from 10 - 50 microns. The powders are off-white in color and are available in various melt viscosities depending on the film thickness and level of melt flow required. Typical film... [See More]
- Chemistry: Resin; PEEK
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Powder Coating
- Cure / Setting Technology: Thermoplastic
from ELANTAS North America LLC
CONAP® CONATHANE® Superior Moisture Barriers CONAP® and CONATHANE® products represent the gold standard in conformal coatings for the insulation of electronic components and printed circuitry. Available in acrylic and polyurethane formulations [See More]
- Chemistry: Acrylic (optional feature); Polyurethane (optional feature); Resin
- Form: Liquid
- Type: Coating; Sealer
- Features: Chemical Resistant (optional feature); Dielectric (optional feature); Protective
from AGC Chemicals Americas, Inc.
Fluon® PFA (perfluoro alkoxy) is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. Fluon® PFA has chemical, electrical, and thermal properties almost identical to its close chemical cousin, polytetrafluoroethylene (PTFE), yet can be processed by conventional... [See More]
- Chemistry: Fluoropolymers; Resin
- Operating Temperature: -328 to 500
- Type: Coating; Powder Coating
- Features: Flame Retardant / UL 94V-0 Rated; Processed by Blow Molding, Extrusion, Injection Molding and Transfer Molding
from FORREST Technical Coatings
A corrosion-resistant polyamide epoxy primer for use under high performance fast-dry topcoats. [See More]
- Chemistry: Epoxy; Resin
- Substrate: Concrete; Metallic; Steel
- Type: Coating; Paint
- Cure / Setting Technology: Film Drying; Multicomponent
from Master Bond, Inc.
Master Bond Polymer System EP21AR is a two component epoxy resin compound for durable, high performance, coating liner and adhesive/sealants with outstanding acid as well as excellent overall chemical resistance. The EP21AR compound which is formulated to cure at room temperature or more rapidly at... [See More]
- Chemistry: Epoxy; Resin
- Substrate: Ceramic; Concrete; Glass; Metallic; Plastic; Wood
- Type: Coating
- Cure / Setting Technology: Multicomponent
from AGC Chemicals Americas, Inc.
LUMIFLON ® is the first solvent-soluble fluoropolymer resin for coatings that can be cured at room temperature or at elevated temperatures. LUMIFLON resins, used in topcoats, are ultra-weatherable, and maintain their excellent appearance on buildings, bridges, and other structures, as well as on... [See More]
- Chemistry: Fluoropolymers; Resin
- Substrate: Aluminum
- Type: Coating; Powder Coating
- Cure / Setting Technology: Can Be Cured At Room or High Temperatures
from FORREST Technical Coatings
Polyurethane coatings are formulated to have excellent flow characteristics while providing good mechanical and chemical resistance. These products also offer exterior durability. [See More]
- Chemistry: Polyurethane; Resin; Polyester
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
- Type: Coating; Powder Coating; Paint
- Cure / Setting Technology: Thermoset
from Master Bond, Inc.
Master Bond Polymer Systems X5N Nickel, X5G Graphite and X5SC Silver are novel, highly cost effective one component electrically conductive elestomer based adhesive/sealants for EMI/RFI shielding and related applications. They offer superior shielding over a wide frequency range, superior... [See More]
- Chemistry: Resin; Rubber
- Operating Temperature: -80 to 300
- Type: Coating
- Form: Liquid
from AGC Chemicals Americas, Inc.
Polyether polyols are key components used in the production of polyurethanes. AGC produces three grades: low monol polyether polyol, polyurethane foam and copolymer of polyether polyester. These polyols address major polyurethane applications for flexible and rigid polyurethane foams, coatings,... [See More]
- Chemistry: Polyurethane; Resin
- Form: Liquid
- Type: Coating; Sealer
- Features: Protective
from FORREST Technical Coatings
A fast-drying universal phenolic modified alkyd primer with non-lifting properties. Rust-inhibitive pigments provide excellent corrosion prevention and good weathering characteristics for protection during storage, transit or construction. Appropriate for use on interior or exterior steel substrates... [See More]
- Chemistry: Alkyd; Resin; Formaldehyde Resins (Phenolic, Furan, Melamine)
- Substrate: Metallic; Steel
- Type: Coating; Primer; Base Coat; Paint
- Cure / Setting Technology: Film Drying
from Master Bond, Inc.
Master Bond UV15 is a new one component, high strength, low viscosity, UV curable epoxy resin based polymer system for bonding, sealing, & coating with exceptionally high performance properties. It is a 100% reactive and does not contain any solvents or other volatiles. When exposed to a source... [See More]
- Chemistry: Epoxy; Resin
- Substrate: Ceramic; Glass; Metallic; Plastic; Wood; Other
- Type: Coating
- Cure / Setting Technology: Ultraviolet Light Curing
from FORREST Technical Coatings
FORREST two-part epoxy coatings provide excellent solvent and corrosion resistance for industrial applications. Ideal for areas where a higher level of performance is required for chemical or solvent exposure. [See More]
- Chemistry: Epoxy; Resin
- Substrate: Concrete; Metallic; Steel
- Type: Coating; Paint
- Cure / Setting Technology: Film Drying; Multicomponent
from Master Bond, Inc.
Master Bond UV16 is a new one component, high strength, low viscosity, UV curable epoxy resin based polymer system for bonding, sealing, & coating with exceptionally high performance properties. It is a 100% reactive and does not contain any solvents or other volatiles. When exposed to a source... [See More]
- Chemistry: Epoxy; Resin
- Substrate: Ceramic; Glass; Metallic; Plastic; Wood; Other
- Type: Coating
- Cure / Setting Technology: Ultraviolet Light Curing
from FORREST Technical Coatings
Powder coating is a versatile technology for use on multiple substrates and in multiple applications with the added benefit of low emissions. Available in both TGIC-free and low cure options, our product catalog includes metallic, veins, textures and crinkle effects. [See More]
- Chemistry: Polyurethane; Resin
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
- Type: Coating; Powder Coating; Paint
- Cure / Setting Technology: Thermoset
from Master Bond, Inc.
Master Bond Polymer System EP15 is a one component heat curing epoxy featuring high tensile strength that is utilized in testing the adhesion or cohesive strength of flame-sprayed coatings. This standard test is fully detailed in ASTM specification C 633. EP15 is formulated to cure at temperatures... [See More]
- Chemistry: Epoxy; Resin
- Substrate: Ceramic; Glass; Metallic; Other; Flame Spray Test Samples
- Type: Coating
- Cure / Setting Technology: Thermoset
from FORREST Technical Coatings
FORREST Industrial Enamels are easy to apply industrial coatings in low-VOC, HAPS compliant, water-based, quick-dry, and solvent-based formulations. All are available as single-component finishes for interior or exterior use. Available in aerosols for touch-up and industrial maintenance. [See More]
- Chemistry: Alkyd; Resin
- Substrate: Metallic; Steel
- Type: Coating; Clear Coat; Paint
- Cure / Setting Technology: Film Drying
from Master Bond, Inc.
Master Bond Polymer System EP38 is a fast curing, low viscosity, optically clear two component epoxy system for high performance coating, bonding and sealing. It is 100% reactive and does not contain any volatiles. The mix ratio is a convenient 3 to 1 by weight. EP38 is very fast curing. Coatings as... [See More]
- Chemistry: Epoxy; Resin
- Substrate: Concrete; Metallic; Plastic; Wood
- Type: Coating
- Cure / Setting Technology: Multicomponent
from FORREST Technical Coatings
We carry standard stock and RAL colors, but specialize in working with customers to create decorative and unique appearances for their specific needs. Our product catalog includes metallic, veins, textures and crinkle effects. We do expedient color matches and provide various other effects with... [See More]
- Chemistry: Epoxy; Resin
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
- Type: Coating; Powder Coating; Paint
- Cure / Setting Technology: Thermoset
from Master Bond, Inc.
Master Bond Polymer System EP30-1 is a low viscosity, two component epoxy compound for high performance fiber optics bonding, coating, potting and encapsulation formulated to cure at room temperature or more rapidly at elevated temperatures, with a four (4) to one (1) mix ratio by weight. This... [See More]
- Chemistry: Epoxy; Resin
- Substrate: Ceramic; Concrete; Glass; Metallic; Plastic; Wood
- Type: Coating
- Cure / Setting Technology: Thermoset
from FORREST Technical Coatings
Stove Bright High Temperature Paint is a liquid coating sprayed on properly prepared metal substrate for a long-lasting finish that can withstand peak temperatures to 1200 °F (650 °C). Backed by decades of proven performance, these coatings are the industry standard for heat resistance in... [See More]
- Chemistry: Resin; Silicone
- Substrate: Aluminum; Concrete; Metallic; Steel; Other
- Type: Coating; Paint
- Cure / Setting Technology: Film Drying; Thermoplastic
from Master Bond, Inc.
Master Bond Polymer System UV15-7SP4 is a new one component, optically clear, toughened UV and/or curable polymer system with extended service capability of -80 °F to +250 °F. It is 100% reactive, does not contain any solvents or other volatiles and does not embrittle even upon exposure to... [See More]
- Chemistry: Resin; Rubber
- Substrate: Ceramic; Glass; Metallic; Plastic; Wood; Other
- Type: Coating
- Cure / Setting Technology: Ultraviolet Light Curing
from Saint-Gobain Coating Solutions
Ekonol T101 aromatic polyester filler is a tan powder additive that, when combined with PTFE, produces a composite material with excellent temperature and wear resistance for a wide range of mating surfaces in demanding services. This filler extends the life of bearings and other large moving parts... [See More]
- Chemistry: Fluoropolymers; Resin
- Features: Heat Resistant
- Type: Coating
from Glass Shield Industrials Paints Ltd.
PRODUCT FEATURES. High gloss, single component moisture cure aromatic polyurethane topcoat. Remarkable hardness and impact resistance. Very good chemical and solvent resistance. Outstanding adhesion. Exceptional steel tank lining or protective coating for interior concret. Single component product... [See More]
- Chemistry: Polyurethane; Resin
- Type: Coating; Primer
from Sherwin-Williams
Exterior Products. Whether it ’s new construction or a recoat, a single plane or a commercial fleet, we have the quality products you need to make every application last. Interior Primers. Aerospace Coatings offered by Sherwin-Williams are available in a variety of Primer products specifically... [See More]
- Chemistry: Resin
- Substrate: Metallic
- Type: Coating; Primer; Base Coat; Clear Coat; Paint
- Cure / Setting Technology: Film Drying
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
- Type: Coating; Paint
from IBT Industrial Solutions
Since 1949, IBT Industrial Solutions has been a major supplier to manufacturers, offering reliable products and services in the broad industrial marketplace. We are dedicated to fully meeting your demands for industrial tools and products of the highest quality from the brands you know and trust,... [See More]
- Chemistry: Epoxy; Polyurethane; Resin
- Form: Aerosol
- Type: Coating; Paint
from Protavic America, Inc.
Silver filled epoxy system for tantalum & ceramic termination coating. This product is commonly used for flexible termination of capacitors and offers high strength and flexibility. This product is the "gold" standard for flexible termination. Solvent adjusted. Please contact us for product... [See More]
- Chemistry: Epoxy; Resin; Metal Filled; Silver
- Substrate: Metallic
- Type: Coating; Varnish
- Cure / Setting Technology: Thermoset
from Georgia-Pacific Corporation
The term “coatings ” covers a broad spectrum of GP Chemicals products – from coatings for tissue/towel manufacturing to important ingredients for the paint and coatings market. Industrial Coatings. Phenolics are used to formulate thermoset protective coatings for rigid substrates. [See More]
- Chemistry: Epoxy; Resin
- Industry: Food / Beverage
- Type: Coating
from Techsil Limited
BJB TC-89 Polyurethane Primer was developed to apply against cured urethane substrates for achieving good adhesion when applying another urethane product for painting or bonding applications. TC-89 has also proved to be a good adhesion promoter when casting polyurethanes against dissimilar... [See More]
- Chemistry: Polyurethane; Resin
- Type: Coating; Primer
from Aremco Products, Inc.
Aremco offers an expansive range of ceramic-based materials used for the assembly of high temperature, high power electrical devices, and high temperature fixtures, molds and tooling. These materials, based on aluminum oxide, aluminum nitride, magnesium oxide, silicon dioxide, silicon carbide,... [See More]
- Chemistry: Resin; Metal Filled
- Substrate: Glass
- Type: Coating (optional feature); Sealer
- Operating Temperature: 2000
from Sanchem, Inc.
SafeGard CS is a water based acrylic rust preventative coating designed to prevent corrosion to metal parts due to high humidity. This waterborne corrosion prevention product consists of non-toxic organic inhibitors formulated with a water based acrylic polymer, has no VOC's and dries to a thin... [See More]
- Chemistry: Acrylic; Resin
- Substrate: Metallic
- Type: Coating; Primer; Rust Preventive Coating
- Cure / Setting Technology: Film Drying
from Sauereisen, Inc.
Arctikure No. 230 is a three-component epoxy monolithic floor system that is used to protect concrete and other substrates. from chemical and physical abuse. No. 230 is designed for cold room applications and will cure at temperatures as low as 35oF. Arctikure has the durability to withstand the... [See More]
- Chemistry: Epoxy; Resin
- Substrate: Concrete
- Type: Coating
- Cure / Setting Technology: Film Drying; Multicomponent
from Kansai Paint (America), Inc.
PROVIDING POWERFUL PROTECTION FOR SUBSTRATES WHILE MINIMIZING ENVIRONMENTAL IMPACTAs a pioneer in ultra-thick film epoxy resin coatings, Kansai Paint has released a heavy-duty anticorrosion coating that protects infrastructures from the dangers of a harsh natural environment. In addition, we have... [See More]
- Chemistry: Epoxy; Resin
- Features: Protective
- Type: Coating
- Location / Orientation: Exterior
from Wacker Chemical Corp.
ELASTOSIL ® E60 is a flowable one-component silicone rubber, which cures at room temperature under the influence of atmospheric moisture. Special features. acetic acid-curing system. flowable. excellent heat stability. excellent primerless adhesion to many substrates. Application. Coating for... [See More]
- Chemistry: Resin; Silicone
- Cure / Setting Technology: Reactive or Moisture Cured
- Type: Coating; Sealer
- Cure Temperature: 73
from Bluestar Silicones USA Corp.
Properties. Viscosity 1. Description. BLUESIL ™ V-04 BLU primer is a dilute solution of a reactive silicone resin in naphtha used as an. adhesion promoter with Bluestar Silicones moldmaking and tooling grade materials. [See More]
- Chemistry: Resin; Silicone
- Substrate: Plastic
- Type: Coating; Primer
- Cure / Setting Technology: Film Drying
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Structural Adhesive Primer EC-1290 is a sprayable primer suggested for use with 3M ™ Scotch-Weld ™ Structural Adhesive Films AF-6, AF-10 and AF-13. Simplify production scheduling by protecting the cleaned surfaces until the bonding operations can be... [See More]
- Chemistry: Resin; Formaldehyde Resins (Phenolic, Furan, Melamine)
- Substrate: Aluminum; Metallic
- Type: Coating; Primer; Adhesive Primer
- Form: Liquid
from Rust-Oleum Corporation
Acrylic aliphatic urethane, high gloss, two component, gloss retention [See More]
- Chemistry: Acrylic; Polyurethane; Resin
- Substrate: Aluminum; Concrete; Metallic; Steel
- Type: Coating; Enamel; Base Coat
- Cure / Setting Technology: Multicomponent
from PPG Protective & Marine Coatings
Water-based inorganic zinc silicate PCP [See More]
- Chemistry: Resin; Formaldehyde Resins (Phenolic, Furan, Melamine)
- Substrate: Metallic; Steel
- Type: Coating; Primer
- Thickness: 0.0020 to 0.0030
from Sherwin-Williams Protective & Marine Coatings
SherPlate 360 is a 100% solids epoxy coating, formulated specifically for immersion service in refined fuel storage tanks, petroleum tanks, CHT tanks, and ballast tanks. The high build, edge-retentive properties provide superior protection compared to conventional epoxies. 100% solids, low VOC. 1:1... [See More]
- Chemistry: Epoxy; Resin
- Substrate: Concrete; Steel; Other; Iron
- Type: Coating
- Thickness: 0.0050 to 0.0100
from U.S. Plastic Corporation
HCF is a flexible acrylic, water base coating. Its very low V.O.C.s, non-flammable and high solids content make it an Emission Control Coating System, eccs, that can be air dried or heat cured to meet production demands. HCF can be sprayed*, dipped or brushed, is available in a wide variety of... [See More]
- Chemistry: Acrylic; Resin
- Type: Coating
from Epoxies Etc...
30-3019 is an unfilled, 100% solids, very low viscosity epoxy resin system. It can also be used as a potting/casting compound in small quantities; usually less than 30 grams of material. 30-3019 can be applied by brush, spray, or dip. [See More]
- Chemistry: Epoxy; Resin
- Cure / Setting Technology: Multicomponent; Thermoset
- Type: Coating
- Cure Temperature: 77 to 149
from Crosslink
Coatings currently are available to prevent corrosion. However, many of them employ hexavalent chromium, a highly toxic chemical and known carcinogen. Current legislation in Europe (RoHS) and California (EWRA) are helping to phase out the use of this chemical.Crosslink offers a new, non-toxic smart... [See More]
- Chemistry: Resin; Electroactive Polymer
- Substrate: Metallic
- Type: Coating
- Cure / Setting Technology: Film Drying
from Daikin America, Inc.
OPTOOL is fluorine compound which has very secific structure and has excellent fouling prevention performance. Especially it provides excellent fingerprint marking prevention capability. [See More]
- Chemistry: Fluoropolymers; Resin; Fluorine
- Substrate: Glass
- Type: Coating; Anti-Fouling Agent for Lenses/Displays
- Cure / Setting Technology: Film Drying
from Acoustical Solutions, Inc.
Sound Damping Compound is a water based damping compound for the treatment of vibrating metal, wood, glass, ceramic and most plastic surfaces. This material imparts vibration damping and a shift in the dominant frequency. The resulting structure borne noise reduction provides a means of improving... [See More]
- Chemistry: Resin; Rubber
- Substrate: Aluminum; Anodized; Ceramic; Glass; Metallic; Plastic; Steel; Wood
- Type: Coating; Sound Damping
- Cure / Setting Technology: Thermoset
from Dampney Company, Inc.
Wash Primer Metal Conditioner for galvanized or aluminum surfaces for high temperature surfaces and can be topcoated with the 200 or 230 series. Used for galvanized or aluminum surfaces and meets MIL-C-15328VB coating pre-treatment (formula 117 for metals). [See More]
- Chemistry: Resin; Vinyl; Metal Filled
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Primer
- Cure / Setting Technology: Film Drying; Thermoset (optional feature)
from Nitto Seiko America
The oil based viscous liquid which is enclosed in a microcapsule is applied on the screw point (self-tapping screw, machine screw, bolt, etc.) We term these applied screws “CP-GRIP. ”. Self-tapping had been thought unfit to the circuit board due to a problem of metal chips but it can be... [See More]
- Chemistry: Alkyd; Resin
- Form: Microcapsule
- Type: Coating
- Industry: Electronics
from R. S. Hughes Company, Inc.
3M Scotchkote 323 epoxy comes in green and is packaged 1 qt per inner, 1 per case. Designed to have corrosion-resistant properties. This product requires a specific mix ratio for proper use. Requires a 2:1 mix ratio. Cure time should always be considered on any application or project. Once applied,... [See More]
- Chemistry: Epoxy; Resin
- Operating Temperature: ? to 122
- Type: Coating
- Features: Corrosion Resistant
from ACCRAbond, Inc.
CONATHANE ® CE-1155 is a two-component, solvent-based polyurethane printed circuit board coating designed for use in adverse environments. CE-1155 provides outstanding resistance to moisture and good abrasion resistance. [See More]
- Chemistry: Polyurethane; Resin
- Cure / Setting Technology: Multicomponent
- Type: Coating
- Industry: Electronics
from Redwood Plastics
Anti-Graffiti Wearlon ®. Put Scraping and Painting to an End. Our Wearlon ® Anti-Graffiti Coatings protects surfaces from graffiti vandals. An epoxy-silicone, three component, water-based, room temperature cure coating. The Wearlon coating with its slick surface resists spray paint,... [See More]
- Chemistry: Epoxy; Resin; Silicone
- Substrate: Metallic
- Type: Coating; Anti-Graffiti
- Cure / Setting Technology: Film Drying; Multicomponent; Room Temperature Cure Coating
from Owens Corning® FOAMGLAS® Insulation
A highly flexible, acrylic latex coating used with FOAMGLAS ® insulation where a superior weather barrier coating is required. It is available in colors and may be applied by glove, trowel, brush or spray. U.S. Stock Item. Available in standard 5 gallon pails. E.U. Stock Item. Available in... [See More]
- Chemistry: Acrylic; Resin
- Cure / Setting Technology: Film Drying
- Type: Coating
- Operating Temperature: -30 to 220
from Berry Plastics Corporation - Engineered Materials Division
Polyken 1027. LIQUID ADHESIVE/PRIMER. Polyken 1027 liquid adhesive system is ideal for slower machine application to rough, reconditioned, or grit-blasted pipe surfaces. It provides a uniformly smooth, instant tack surface for Polyken coating systems. Applications. Solvent based primer designed for... [See More]
- Chemistry: Resin; Rubber
- Substrate: Concrete; Metallic; Steel; Wood
- Type: Coating; Primer
- Cure / Setting Technology: Film Drying
from Heresite Protective Coatings, LLC
This family of thin film, air dry phenolics is excellent for resistance to corrosive fume atmospheres and is particularly good in marine and salt air environments. VR-514 coatings exhibit superior durability, excellent adhesion and good flexibility. Typical applications include Swimming Pools, Waste... [See More]
- Chemistry: Resin; Formaldehyde Resins (Phenolic, Furan, Melamine)
- Substrate: Aluminum; Metallic; Steel
- Type: Coating
- Cure / Setting Technology: Film Drying
from Valspar Corporation (The)
Priced to flow. Our Acrodize ® coating is a formula for success. A tough, hard, high-traffic warrior with a price that ’s easy on the budget. Developed for storefronts, fast food operations, schools, shopping malls and all manner of heavy-use public spaces. Looks great, wears incredibly... [See More]
- Chemistry: Fluoropolymers; Resin; 70% PVDF
- Substrate: Aluminum
- Type: Coating
- Features: Weather Resistant
from Dryvit UK
Acrylic coating for changing the colour of existing Dryvit finishes or use with Custom Brick. Dryvit ’s exterior coatings have been formulated to outperform traditional exterior paints. Based on high performance acrylic and silicone technologies these finishes are the ideal solution for... [See More]
- Chemistry: Acrylic; Resin
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint
- Form: Liquid
from LexJet Corporation
ClearShield ® Type C is a water-based coating ideal for Giclee canvas applications. Type C exhibits the flexibility required for stretching canvas with no cracking of the clear coat. It is formulated to work on microporous and porous ink jet receptive layers. Type C reduces or eliminates... [See More]
- Chemistry: Acrylic; Resin
- Coverage: 480
- Type: Coating
- Form: Water
from MINTEQ® International Inc, Pyrogenics Group
The FIREX ™ family of products are specialized fire and thermal protection coatings, that absorb and reject thermal energy in a controlled and predictable manner and are primarily intended for use in high risk environments. [See More]
- Chemistry: Epoxy; Polyurethane; Resin
- Substrate: Glass; Metallic; Wood; Other; Paper
- Type: Coating
- Thickness: 0.0600
from Aervoe Industries Incorporated
Quick-drying, asphalt-based material, forms a smooth, even, protective film [See More]
- Chemistry: Resin
- Substrate: Concrete; Metallic; Plastic; Wood; Other; Vinyl
- Type: Coating; Primer
- Cure / Setting Technology: Film Drying
from Sekisui Voltek, LLC
Our Volextra process is an extremely flexible extrusion coating capability. Using state of the art technology, solid plastic is permanently melt bonded to our Volara ® foams. Polyolefin based coatings can be engineered to match your design needs, in a range of thicknesses from 0.0015" to 0.055". [See More]
- Chemistry: Resin; Vinyl; Ethylene Vinyl Acetate Copolymer
- Cure / Setting Technology: Thermoplastic
- Type: Coating
- Thickness: 0.0015 to 0.0550
from Saint-Gobain Coating Solutions
Ekonol M102A aromatic polyester filler is a light tan/white powder additive that, when combined with PTFE, produces composite materials with excellent temperature and wear resistance for a wide range of mating surfaces in demanding services. Saint-Gobain M102A is a polyester powder comprised of... [See More]
- Chemistry: Fluoropolymers; Resin
- Features: Heat Resistant
- Type: Coating
from Glass Shield Industrials Paints Ltd.
PRODUCT FEATURES. Aluminum pigmented, single component moisture cure urethane primer. Can be applied and cured at temperatures below freezing (-4 ºC). Hard, tough, impact resistant coating. Excellent adhesion and abrasion resistance. Excellent intercoat adhesion with subsequent coatings. V.O.C. [See More]
- Chemistry: Polyurethane; Resin
- Type: Coating; Primer
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Exterior primers assure superior hiding, topcoat appearance and long-lasting results. Commercial High-Performance Coatings. A comprehensive line-up of high-performance coatings... [See More]
- Chemistry: Acrylic; Alkyd; Resin
- Substrate: Concrete; Metallic; Plastic; Wood
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Cure / Setting Technology: Film Drying
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
- Type: Coating; Paint
from Techsil Limited
Techsil ® AP-135 is a clear/water white adhesion promoter. This single component solvent is made up of a blend of silanes. AP135 will enhance the adhesion to steel, aluminum and glass and is suitable for use with polyurethane and epoxy resins. Surfaces should be grease free and clean before... [See More]
- Chemistry: Polyurethane; Resin
- Type: Coating; Primer
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Structural Adhesive Primer EC-1945 B/A is a two-part chemically curing, corrosion resistant primer. Scotch-Weld EC-1945 B/A primer improves adhesion of sealers, epoxies, and urethanes to most metals as well as offering increased corrosion protection. [See More]
- Chemistry: Epoxy; Resin
- Substrate: Aluminum; Metallic
- Type: Coating; Primer; Adhesive Primer
- Cure / Setting Technology: Film Drying
from Rust-Oleum Corporation
Anti-slip one-step pedestrian grade, single component anti-slip coating [See More]
- Chemistry: Epoxy; Resin
- Substrate: Concrete
- Type: Coating; Paint
- Cure / Setting Technology: Film Drying
from PPG Protective & Marine Coatings
High Solids Epoxy Coating [See More]
- Chemistry: Epoxy; Resin
- Substrate: Concrete; Metallic; Steel
- Type: Coating; Clear Coat
- Thickness: 0.0040 to 0.0080
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®1000 HS is a high solids, heavy duty, two-component, catalyzed, polyamide epoxy coating formulated for demanding marine and industrial requirements. This dries rapidly to a tough, high gloss finish with excellent resistance to alkalies, abrasion, corrosion, and chemical attack. [See More]
- Chemistry: Epoxy; Resin; Polyamide
- Substrate: Concrete; Steel; Wood
- Type: Coating
- Cure / Setting Technology: Multicomponent
from U.S. Plastic Corporation
HCF is a flexible acrylic, water base coating. Its very low V.O.C.s, non-flammable and high solids content make it an Emission Control Coating System, eccs, that can be air dried or heat cured to meet production demands. HCF can be sprayed*, dipped or brushed, is available in a wide variety of... [See More]
- Chemistry: Acrylic; Resin
- Type: Coating
from Epoxies Etc...
Deco-Coat 2501 Resin is a two component high gloss epoxy resin that forms a hard enamel like finish. This versatile coating is a liquid resin that is safe and easy to use. It does no contain any solvents or offensive odors. DC-2501R is also available in low viscosity (DC-2501R LV). [See More]
- Chemistry: Epoxy; Resin
- Substrate: Concrete; Glass; Metallic; Plastic; Wood
- Type: Coating; Clear Coat
- Cure / Setting Technology: Multicomponent; Thermoset
from Dampney Company, Inc.
A water-borne copolymer that is designed for application to rusted ferrous metal surfaces. When properly applied the coating converts the rusted surface to a dark, stable organic iron compound. This product has a low permeability factor and is impermeable to oxygen and moisture while providing a... [See More]
- Chemistry: Resin; Copolymer
- Substrate: Metallic; Steel
- Type: Coating; Rust Conversion
- Cure / Setting Technology: Film Drying
from R. S. Hughes Company, Inc.
The ACL acrylic ready-to-use ESD / anti-static cleaning chemical is sold 4 gal per case and is another quality product from ACL. [See More]
- Chemistry: Acrylic; Resin
- Type: Coating
from Owens Corning® FOAMGLAS® Insulation
A silicone-based, single-component coating, sealant and adhesive which cures by reaction with humidity. It is odorless, free of solvents, isocyanates and PVC. It provides good weathering, UV and mechanical resistance, as well as excellent chemical resistance, and is classified as a flame retardant... [See More]
- Chemistry: Resin
- Cure / Setting Technology: Reactive or Moisture Cured
- Type: Coating
- Operating Temperature: -58 to 248
from Heresite Protective Coatings, LLC
Our 50 years of coating history speaks for itself. In 1964, Heresite was the first company to apply coatings to aluminum-finned, copper-tubed heat exchangers. The Heresite coating became then, and still remains a standard in the industrial coatings industry. We provide the highest quality protective... [See More]
- Chemistry: Resin; Formaldehyde Resins (Phenolic, Furan, Melamine)
- Substrate: Aluminum; Metallic; Steel
- Type: Coating
- Cure / Setting Technology: Thermoset
from Valspar Corporation (The)
Solid StainView stain colors. Total coverage gives maximum protection. VIEW PRODUCT DETAILS. Solid Color Acrylic Siding Stain. Solid Color Decking Stain. Semi-Solid StainView stain colors. Extra pigment adds longevity. VIEW PRODUCT DETAILS. Semi-Solid Siding and Fence. Semi-Solid Deck & Siding... [See More]
- Chemistry: Acrylic; Alkyd; Resin
- Substrate: Wood
- Type: Coating; Stain
- Cure / Setting Technology: Film Drying
from Dryvit UK
An acrylic stain used in conjunction with Drytex Wood to give a natural wood effect appearance. [See More]
- Chemistry: Acrylic; Resin
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint; Stain
- Form: Liquid
from LexJet Corporation
LexJet Elite Luster UV Vinyl Laminate 3.2 Mil with PreLume ® technology can extend the life of graphics in which image fidelity, color pop, and brightness are paramount. This flexible, calendered PVC film with a permanent, pressure-sensitive, acrylic adhesive is ideal for corporate customers... [See More]
- Chemistry: Resin; Vinyl
- Type: Coating
from Glass Shield Industrials Paints Ltd.
PRODUCT FEATURES. Primer loaded with zinc, aluminum and micaceous iron oxide (M.I.O.) for maximum corrosion control. Can be applied and cured at temperatures below freezing (-4 ºC). Exceptional penetrating and sealing properties. Excellent adhesion to tightly adhering rust. Excellent intercoat... [See More]
- Chemistry: Polyurethane; Resin
- Type: Coating; Primer
from Sherwin-Williams
Sherwin-Williams is a global manufacturing leader of automotive refinishing products. With a vast array of products to fit every need, Sherwin-Williams Automotive Finishes has you covered. [See More]
- Chemistry: Acrylic; Resin
- Substrate: Metallic
- Type: Coating; Enamel; Primer; Base Coat; Paint
- Cure / Setting Technology: Film Drying
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Aluminum; Resin; Metal Filled
- Form: Aerosol
- Type: Enamel; Paint
from Techsil Limited
Techsil ® AP-135 is a clear/water white adhesion promoter. This single component solvent is made up of a blend of silanes. AP135 will enhance the adhesion to steel, aluminum and glass and is suitable for use with polyurethane and epoxy resins. Surfaces should be grease free and clean before... [See More]
- Chemistry: Polyurethane; Resin
- Type: Coating; Primer
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Structural Adhesive Primer EC-3960 is a sprayable corrosion inhibiting adhesive primer. It provides a high degree of protection against corrosive environments both inside and outside the adhesive bondline. It is suggested for use with 3M ™ Scotch-Weld ™... [See More]
- Chemistry: Epoxy; Resin
- Substrate: Aluminum; Metallic
- Type: Coating; Primer; Adhesive Primer
- Form: Liquid
from Rust-Oleum Corporation
Industrial performance, zero VOC, zero HAP, odorless, single component [See More]
- Chemistry: Acrylic; Polyurethane; Resin
- Substrate: Metallic; Steel
- Type: Enamel; Base Coat; Paint
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®1K Waterbased Urethane Floor Enamel is a gloss, high performance, one component polyester waterbased urethane, formulated specifically for industrial floor applications. Provides outstanding abrasion resistance, good chemical resistance, with excellent color and gloss retention. Fast... [See More]
- Chemistry: Polyurethane; Resin
- Substrate: Concrete
- Type: Coating; Enamel
- Thickness: 0.0040 to 0.0120
from U.S. Plastic Corporation
The most aggressive primer commercially available. Excellent product for cold weather applications. If used properly, will soften the surfaces of PVC and CPVC pipe and fittings which is necessary for the proper solvent welding of the materials. Meets ASTM F-656 & SCAQMD 1168 Industry Listings:... [See More]
- Chemistry: Resin; Vinyl
- Type: Coating; Primer
from Epoxies Etc...
DECO-COAT 2510 is a two-component high gloss resin used to form a "water white", ultra-clear enamel like finish. It is impervious to water, solvents, and cosmetics. This Deco-Coat formulation contains UV stabilizers to help prevent yellowing or degradation due to the sunlight's ultra violet rays. [See More]
- Chemistry: Epoxy; Resin
- Cure / Setting Technology: Multicomponent; Thermoset
- Type: Coating; Clear Coat
- Cure Temperature: 77 to 100
from Dampney Company, Inc.
Endcor 772 protects steel surfaces subjected to immersion in fresh or salt water, exposure in tidal or splash zones, or burial in soil. It is effective on the interiors of tanks and lines containing brine, crude oil, petroleum products, sewage or strong alkalies. It is resistant to a wide range of... [See More]
- Chemistry: Epoxy; Resin
- Substrate: Metallic; Steel
- Type: Coating; Clear Coat
- Cure / Setting Technology: Film Drying
from R. S. Hughes Company, Inc.
The ACL acrylic ready-to-use ESD / anti-static cleaning chemical is another quality product from ACL. [See More]
- Chemistry: Acrylic; Resin
- Type: Coating
from Valspar Corporation (The)
Valspar provides coatings solutions for virtually every closure requirement. valLID closure systems are custom-formulated for a complete range of food and beverage products, from infant formulas and baby foods, to mild (jams/jellies), medium (tomato sauce) and aggressive food packs (pickles,... [See More]
- Chemistry: Epoxy; Resin
- Substrate: Aluminum; Steel
- Type: Coating
- Form: Solvent
from Dryvit UK
100% acrylic-based finish with multi-colored quartz aggregates. [See More]
- Chemistry: Acrylic; Resin
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint
- Form: Liquid
from LexJet Corporation
LexJet Floor Gloss Laminate 3 Mil is a high-gloss vinyl designed to protect short-term indoor floor graphics for up to 180 days. This laminate is specially formulated to work in conjunction with LexJet's Simple Indoor FloorAd and is UL classified to slip resistance. Floor advertising is a great way... [See More]
- Chemistry: Resin; Vinyl
- Operating Temperature: -30 to 160
- Type: Coating
from Glass Shield Industrials Paints Ltd.
PRODUCT FEATURES. Outstanding adhesion and abrasion resistance. Good solvent and chemical resistance. Very low V.O.C. (1.7 lbs/US gal. | 206 g/l). Easy to apply by brush, roller or spray (airless prefered). Product can be applied in damp and humid conditions. No dew point restrictions. One component... [See More]
- Chemistry: Polyurethane; Resin
- Type: Coating; Primer
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Exterior primers assure superior hiding, topcoat appearance and long-lasting results. Commercial High-Performance Coatings. A comprehensive line-up of high-performance coatings... [See More]
- Chemistry: Acrylic; Alkyd; Resin
- Substrate: Concrete; Metallic; Plastic; Wood
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Cure / Setting Technology: Film Drying
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
- Form: Aerosol
- Type: Enamel; Paint
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Structural Adhesive Solution EC-3984 is a liquid, sprayable modified version of 3M ™ Scotch-Weld ™ Structural Adhesive Film AF 3109-2 . It has improved high temperature performance compared to conventional 250 °F (121 °C) curing adhesives. [See More]
- Chemistry: Epoxy; Resin
- Substrate: Aluminum; Metallic; Other; Honeycomb Core
- Type: Coating; Primer; Adhesive Primer
- Cure / Setting Technology: Thermoset
from Rust-Oleum Corporation
Three component, epoxy resin polymer, brightly colored quartz aggregate [See More]
- Chemistry: Epoxy; Resin
- Substrate: Concrete
- Type: Coating; Clear Coat
- Cure / Setting Technology: Multicomponent
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®33 EPOXY PRIMER/SEALER is a low viscosity, 100% solids, high build, fast cure, epoxy primer designed for use under ArmorSeal ®650 or where a high build primer is needed. This primer/sealer enhances adhesion by penetrating into the concrete substrate and helps reduce bubbling and... [See More]
- Chemistry: Epoxy; Resin
- Substrate: Concrete; Wood
- Type: Coating; Primer; Sealer
- Cure / Setting Technology: Multicomponent
from Epoxies Etc...
Deco-Coat 2550 Resin System is a two component, low viscosity, flexible epoxy decorative coating. This versatile coating is a liquid resin that is safe and easy to use. It does not contain any solvents or offensive odors. [See More]
- Chemistry: Epoxy; Resin
- Substrate: Concrete; Glass; Metallic; Plastic; Wood
- Type: Coating; Clear Coat
- Cure / Setting Technology: Multicomponent; Thermoset
from Dampney Company, Inc.
Heat resistant coatings, color stable ambient to 500F (260C) [See More]
- Chemistry: Resin; Silicone
- Substrate: Metallic; Steel; Other; Stainless Steel
- Type: Coating; Clear Coat
- Cure / Setting Technology: Film Drying
from R. S. Hughes Company, Inc.
The ACL acrylic ready-to-use ESD / anti-static cleaning chemical is another quality product from ACL. [See More]
- Chemistry: Acrylic; Resin
- Type: Coating
from Valspar Corporation (The)
Full line of color and special effects are available for your cosmetic bottle applications. Differentiate your product on the shelf with the latest technology from Valspar. Technology. Epoxy technology. Spray application. Clear Base Varnish plus 14 Colorants (mixing system). Monolayer. Water based. [See More]
- Chemistry: Epoxy; Resin
- Substrate: Glass
- Type: Coating; Varnish
- Industry: Food / Beverage
from Dryvit UK
A premixed, 100% acrylic-based finish designed to replicate the appearance of limestone blocks. [See More]
- Chemistry: Acrylic; Resin
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint
- Form: Liquid
from LexJet Corporation
LexJet Performance Matte Vinyl Laminate 3 Mil, combines quality, value, economy, and performance for all types of interior graphics. The 3 mil matte-finish laminate is designed to add significant profit for applications like event graphics, legal and corporate presentations, point-of-purchase, and... [See More]
- Chemistry: Resin; Vinyl
- Type: Coating
from Glass Shield Industrials Paints Ltd.
PRODUCT FEATURES. Aliphatic, single component, moisture cure polyurethane topcoat. Outstanding gloss retention when exposed to damaging U.V. rays. Super tough, hard and impact resistant topcoat. Excellent adhesion. Anti-graffiti properties. Tile like glaze coating. Outstanding gloss retention when... [See More]
- Chemistry: Polyurethane; Resin
- Type: Coating; Clear Coat
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Interior primers assure superior hiding, topcoat appearance and long-lasting results. Wood Stains, Sealers & Clear Topcoats. A wide variety of stains and sealers for... [See More]
- Chemistry: Acrylic; Alkyd; Resin
- Substrate: Concrete; Metallic; Plastic; Wood
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Cure / Setting Technology: Film Drying
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
- Form: Aerosol
- Type: Enamel; Paint
from Rust-Oleum Corporation
Heavy duty static control floor topping, 3 component epoxy resin polymer [See More]
- Chemistry: Epoxy; Resin
- Substrate: Concrete
- Type: Coating; Clear Coat; Sealer
- Cure / Setting Technology: Multicomponent
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®FLOOR-PLEX 7100 PRIMER is a heavy duty, VOC compliant, low odor, two component, catalyzed, water borne, polyamide epoxy floor primer. Provides overall performance comparable to that of most solvent borne epoxy floor systems. Designed for use under ArmorSeal ®finish coats. [See More]
- Chemistry: Epoxy; Resin; Polyamide
- Substrate: Concrete
- Type: Coating; Primer
- Cure / Setting Technology: Multicomponent
from Dampney Company, Inc.
Heat resistant coatings color stable to 500F [See More]
- Chemistry: Resin; Silicone
- Substrate: Metallic; Steel; Other; Stainless Steel
- Type: Coating; Clear Coat
- Cure / Setting Technology: Film Drying
from R. S. Hughes Company, Inc.
The ACL Eco Friendly acrylic ready-to-use ESD / anti-static coating is sold 4 gal per case and is another quality product from ACL. [See More]
- Chemistry: Acrylic; Resin
- Type: Coating
from Valspar Corporation (The)
GENERAL PURPOSE. Indoors or out, whatever the surface, choose the finest multi-purpose enamel paint available for a durable, flawless finish that is scratch- and water-resistant. PRIMER. Get your project off to the best start possible with job-specific formulations that cover a wide range of... [See More]
- Chemistry: Resin; Vinyl
- Substrate: Metallic
- Type: Coating; Enamel; Lacquer Paint; Primer; Base Coat; Clear Coat; Paint
- Cure / Setting Technology: Film Drying
from Dryvit UK
Architectural finish in the look of brick, stone, slate and tile for vertical surfaces. [See More]
- Chemistry: Resin
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint
- Form: Liquid
from LexJet Corporation
Sunset Gloss Coating is a non-yellowing, fast-drying, water-based acrylic coating that adds a tough, flexible glossy layer of protection to inkjet prints on canvas and art papers. It can be applied with brushes, high-density foam rollers, or an HPLV paint-sprayer. Sunset Gloss Coating is ready to... [See More]
- Chemistry: Acrylic; Resin
- Coverage: 480
- Type: Coating
- Form: Water
from Glass Shield Industrials Paints Ltd.
PRODUCT FEATURES. High quality anticorrosive polyurethane primer. Fast dry primer for efficient job completion. Very good sanding and curing times. High build capabilities. Very good application characteristics. Easy to apply with any traditional painting equipment. Easy to sand primer. Long pot... [See More]
- Chemistry: Polyurethane; Resin
- Type: Coating; Primer
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Interior primers assure superior hiding, topcoat appearance and long-lasting results. Wood Stains, Sealers & Clear Topcoats. A wide variety of stains and sealers for... [See More]
- Chemistry: Acrylic; Alkyd; Resin
- Substrate: Concrete; Metallic; Plastic; Wood
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Cure / Setting Technology: Film Drying
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
- Form: Aerosol
- Type: Enamel; Paint
from Rust-Oleum Corporation
Two component, water based epoxy coating, low risk of flammability [See More]
- Chemistry: Epoxy; Resin
- Substrate: Concrete
- Type: Coating
- Cure / Setting Technology: Multicomponent
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®FLOOR-PLEX 7100 is a heavy duty, interior, VOC compliant, low odor, two component, catalyzed, water borne, polyamide epoxy floor coating. This dries rapidly to an extra tough, gloss finish which will withstand heavy industrial traffic, abrasion, and general chemical attack. Provides... [See More]
- Chemistry: Epoxy; Resin; Polyamide
- Substrate: Concrete
- Type: Coating; Clear Coat
- Cure / Setting Technology: Multicomponent
from Dampney Company, Inc.
Zinc silicone primer, heat resistant ambient to 500F (260C) [See More]
- Chemistry: Resin; Zinc; Silicone
- Substrate: Metallic; Steel
- Type: Coating; Primer
- Cure / Setting Technology: Film Drying; Multicomponent
from R. S. Hughes Company, Inc.
The ACL Eco Friendly acrylic ready-to-use ESD / anti-static coating is another quality product from ACL. [See More]
- Chemistry: Acrylic; Resin
- Type: Coating
from Dryvit UK
Exterior and interior quartz aggregate finish. [See More]
- Chemistry: Resin
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint
- Form: Liquid
from LexJet Corporation
Sunset Satin Coating is a non-yellowing, fast-drying, water-based acrylic coating that adds a tough, flexible layer of protection and a soft luster finish to inkjet prints on canvas and art papers. It can be applied with brushes, high-density foam rollers, or an HPLV paint-sprayer. Sunset Satin... [See More]
- Chemistry: Acrylic; Resin
- Coverage: 480
- Type: Coating
- Form: Water
from Glass Shield Industrials Paints Ltd.
PRODUCT FEATURES. Excellent surface pretreatment for galvanized steel and aluminum. Improves adhesion of primers and topcoats on galvanized steel and non-ferrous metal such as aluminum. Very fast drying times for efficient recoatability. Easy to apply with any conventional painting equipment [See More]
- Chemistry: Resin; Vinyl
- Type: Coating; Primer
from Sherwin-Williams
Paint. Highly durable, high quality coatings designed for superior performance on all exterior substrates. Our low-temp formulas let you expand your season. Primers. Get beautiful, long-lasting results for your exterior surfaces. Primers "anchor" finish coats, level uneven areas, seal porous... [See More]
- Chemistry: Acrylic; Alkyd; Resin
- Substrate: Concrete; Metallic; Plastic; Wood
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Cure / Setting Technology: Film Drying
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
- Form: Aerosol
- Type: Enamel; Paint
from Rust-Oleum Corporation
Two component, low odor, low VOC, 100% solids epoxy floor coating [See More]
- Chemistry: Epoxy; Resin
- Substrate: Concrete
- Type: Coating; Base Coat
- Cure / Setting Technology: Multicomponent
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®HS POLYURETHANE FLOOR ENAMEL is a heavy duty, two component, exterior/interior, low VOC, high solids, polyester-aliphatic urethane industrial floor coating. Provides a high gloss, excellent chemical resistance, color retention, and chalk resistance. Outstanding resistance a wide... [See More]
- Chemistry: Polyurethane; Resin
- Substrate: Concrete; Steel; Other; Iron
- Type: Coating; Enamel
- Cure / Setting Technology: Multicomponent
from Dampney Company, Inc.
Zinc silicone primer heat resistant to 500F [See More]
- Chemistry: Resin; Zinc; Silicone
- Substrate: Metallic; Steel
- Type: Coating; Primer
- Cure / Setting Technology: Film Drying; Multicomponent
from R. S. Hughes Company, Inc.
The ACL Eco Friendly acrylic ready-to-use ESD / anti-static coating is another quality product from ACL. [See More]
- Chemistry: Acrylic; Resin
- Type: Coating
from Dryvit UK
Flexible, elastomeric exterior finish. [See More]
- Chemistry: Resin; Rubber
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint
- Form: Liquid
from Glass Shield Industrials Paints Ltd.
PRODUCT FEATURES. Low V.O.C. (2,8 lb/gal). Outstanding gloss, color retention and resistance to U.V. Remarkable resistance to chemical compounds, impact and abrasion. In field color matching service available. Increased corrosion control when applied over Glass Shield moisture cured urethane primers... [See More]
- Chemistry: Polyurethane; Resin
- Industry: Railway
- Type: Coating; Clear Coat
from Sherwin-Williams
Paint. A critical step for any painting project is choosing the right paint. Thanks to today's improved coatings and applicators, even first-time painters can achieve professional-quality results. Primers. Get the beautiful, long-lasting results you expect. Primers "anchor" finish coats, level... [See More]
- Chemistry: Acrylic; Alkyd; Resin
- Substrate: Concrete; Metallic; Plastic; Wood
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Cure / Setting Technology: Film Drying
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
- Form: Aerosol
- Type: Enamel; Paint
from Rust-Oleum Corporation
Clear, fast drying, oil modified, single component waterborne polyurethane [See More]
- Chemistry: Polyurethane; Resin
- Substrate: Concrete; Wood
- Type: Coating; Clear Coat
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®REXTHANE I FLOOR COATING is a high solids, single component, aliphatic, moisture cure urethane, VOC complying, moisture resistant industrial floor coating. This urethane coating cures to a high gloss and chemical resistant film equivalent to two-part urethane coatings. Impact and... [See More]
- Chemistry: Polyurethane; Resin; Aliphatic
- Substrate: Concrete; Steel; Wood; Other; Metalizing, Steel with Zinc
- Type: Coating; Clear Coat
- Cure / Setting Technology: Film Drying; Reactive or Moisture Cured
from Dampney Company, Inc.
For under insulation, boiling water immersion grade, apply directly to hot steel up to 350F(176C) with service temperatures up to 450F (232C) [See More]
- Chemistry: Resin; Silicone
- Substrate: Metallic; Steel; Other; Stainless Steel
- Type: Coating; Primer
- Cure / Setting Technology: Film Drying; Thermoset (optional feature)
from R. S. Hughes Company, Inc.
The ACL Staticide acrylic ESD / anti-static coating is sold 12 Per Case and is another quality product from ACL. Use caution when purchasing products in this category as some may be flammable. This particular ESD / anti-static coating is flammable. [See More]
- Chemistry: Acrylic; Resin
- Form: Aerosol
- Type: Coating
from Dryvit UK
Interior/exterior acrylic PMR coating in standard and custom colours. Dryvit ’s exterior coatings have been formulated to outperform traditional exterior paints. Based on high performance acrylic and silicone technologies these finishes are the ideal solution for refurbishment or new build. [See More]
- Chemistry: Acrylic; Resin
- Substrate: Concrete; Metallic; Wood; Other; Stucco and Acrylic-Based Textured Finishes
- Type: Coating; Paint
- Cure / Setting Technology: Film Drying
from Glass Shield Industrials Paints Ltd.
PRODUCT FEATURES. Remarkable chemical impact and abrasion resistant topcoat. Excellent gloss and color retention when exposed to damaging U.V. rays. Tough finish coat that can be easily cleaned. Fast dry times for reduced downtimes and increased productivity. Good application characteristics with... [See More]
- Chemistry: Polyurethane; Resin
- Type: Coating; Clear Coat
from Sherwin-Williams
It takes more than a coating to create an exceptional finish, which is why Sherwin-Williams provides OEMs with complete finishing solutions. Across both markets and continents, we help our customers be more efficient, innovative, and highly valued with customized technology and service solutions... [See More]
- Chemistry: Resin
- Substrate: Metallic; Plastic; Wood
- Type: Coating; Powder Coating
- Cure / Setting Technology: Film Drying
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Chemistry: Acrylic; Resin
- Form: Aerosol
- Type: Enamel; Paint
from Rust-Oleum Corporation
High heat resistance, two coat system for exterior heat exposure conditions [See More]
- Chemistry: Resin; Zinc; Metal Filled; Silicone
- Substrate: Metallic; Steel
- Type: Coating; Base Coat; Paint
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
SherPlate PW Epoxy. SherPlate PW Epoxy is an edge retentive, ultra high solids epoxyamine coating engineered for immersion service in potable water pipes and storage tanks. The rapid return to service and high build, edge retentive properties of this coating provide superior protection. One or two... [See More]
- Chemistry: Epoxy; Resin
- Substrate: Concrete; Metallic; Steel
- Type: Coating
- Cure / Setting Technology: Film Drying
from Dampney Company, Inc.
VOC compliant, high build coating from 300F to 1000F (148C to 538C) [See More]
- Chemistry: Resin; Silicone
- Substrate: Metallic; Steel; Other; Stainless Steel
- Type: Coating
- Cure / Setting Technology: Film Drying; Multicomponent; Thermoset (optional feature)
from R. S. Hughes Company, Inc.
The ACL Staticide acrylic ready-to-use ESD / anti-static floor finish is sold 4 gal per case and is another quality product from ACL. Use caution when purchasing products in this category as some may be flammable. This particular ESD / anti-static floor finish is not flammable. [See More]
- Chemistry: Acrylic; Resin
- Type: Coating
from Dryvit UK
A coating used over Dryvit finishes that gives a pearlescent (metallic) appearance. [See More]
- Chemistry: Resin
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint
- Form: Liquid