Sprayable Industrial Coatings
from FORREST Technical Coatings
An industrial-grade, two-component acrylic polyurethane designed to provide added chemical and resistance with a satin gloss and textured appearance. Catalyst available for either interior or exterior use. [See More]
- Dispensing Method: Sprayable
- Chemistry: Alkyd; Polyurethane; Resin
- Type: Coating; Clear Coat; Paint
- Substrate: Aluminum; Ceramic; Metallic; Plastic; Steel; Other; Fiberglass
from Mid-Mountain Materials, Inc.
Thermoseal ® Thermal Coatings are high-temperature coatings excellent for use as protection against flame erosion, molten metal corrosion, and thermal spalling. Our coatings are easily applied by rolling, dipping, or spraying. [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Substrate: Ceramic
- Type: Coating
- Cure / Setting Technology: Film Drying
from Victrex PLC
VICOTE 701-707 grades are specially developed powder coatings. They are available in various average particle sizes from 10 - 50 microns. The powders are off-white in color and are available in various melt viscosities depending on the film thickness and level of melt flow required. Typical film... [See More]
- Dispensing Method: Sprayable
- Chemistry: Resin; PEEK
- Type: Coating; Powder Coating
- Substrate: Aluminum; Metallic; Steel
from Everlube Products
Ever-Slik 1201 is a thermally cured, specially blended epoxy based coating which provides outstanding corrosion resistance in almost any environment. Along with its excellent corrosion resistance, Ever-Slik 1201 is ideal for applications where an abrasion resistant coating is needed. Ever-Slik 1201... [See More]
- Dispensing Method: Sprayable
- Chemistry: Epoxy; Resin
- Type: Coating
- Substrate: Metallic; Steel
from FORREST Technical Coatings
A corrosion-resistant polyamide epoxy primer for use under high performance fast-dry topcoats. [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Epoxy; Resin
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Steel
from FORREST Technical Coatings
An electrostatic developed specifically to minimize the electrostatic discharge (ESD) created when two surfaces with different voltages meet one another. When properly applied these coatings can prevent significant damage caused by electrostatic discharge. [See More]
- Dispensing Method: Sprayable
- Substrate: Metallic; Plastic; Steel
- Type: Coating; Powder Coating; Paint
- Cure / Setting Technology: Thermoset
from FORREST Technical Coatings
Standard polyester TGIC powders are excellent coatings that protect the end product while also providing many decorative colors and special effects looks at the same time. These products can be used for interior or exterior applications. Variety of gloss levels and textures available. [See More]
- Dispensing Method: Sprayable
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
- Type: Coating; Powder Coating; Paint
- Cure / Setting Technology: Thermoset
from FORREST Technical Coatings
Polyurethane coatings are formulated to have excellent flow characteristics while providing good mechanical and chemical resistance. These products also offer exterior durability. [See More]
- Dispensing Method: Sprayable
- Chemistry: Polyurethane; Resin; Polyester
- Type: Coating; Powder Coating; Paint
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
from FORREST Technical Coatings
A fast-drying universal phenolic modified alkyd primer with non-lifting properties. Rust-inhibitive pigments provide excellent corrosion prevention and good weathering characteristics for protection during storage, transit or construction. Appropriate for use on interior or exterior steel substrates... [See More]
- Dispensing Method: Sprayable
- Chemistry: Alkyd; Resin; Formaldehyde Resins (Phenolic, Furan, Melamine)
- Type: Coating; Primer; Base Coat; Paint
- Substrate: Metallic; Steel
from FORREST Technical Coatings
FORREST two-part epoxy coatings provide excellent solvent and corrosion resistance for industrial applications. Ideal for areas where a higher level of performance is required for chemical or solvent exposure. [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Epoxy; Resin
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Steel
from FORREST Technical Coatings
Powder coating is a versatile technology for use on multiple substrates and in multiple applications with the added benefit of low emissions. Available in both TGIC-free and low cure options, our product catalog includes metallic, veins, textures and crinkle effects. [See More]
- Dispensing Method: Sprayable
- Chemistry: Polyurethane; Resin
- Type: Coating; Powder Coating; Paint
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
from FORREST Technical Coatings
FORREST Industrial Enamels are easy to apply industrial coatings in low-VOC, HAPS compliant, water-based, quick-dry, and solvent-based formulations. All are available as single-component finishes for interior or exterior use. Available in aerosols for touch-up and industrial maintenance. [See More]
- Dispensing Method: Sprayable
- Chemistry: Alkyd; Resin
- Type: Coating; Clear Coat; Paint
- Substrate: Metallic; Steel
from FORREST Technical Coatings
Rust-inhibitive barrier coatings for use on interior or exterior steel substrates and compatible with various top coats. These versatile primers are recommended for use on machinery, structural steel, agricultural equipment and fabricated metals. Most products are available in standard white, red... [See More]
- Dispensing Method: Sprayable
- Substrate: Metallic; Steel
- Type: Coating; Primer; Base Coat; Paint
- Cure / Setting Technology: Film Drying
from FORREST Technical Coatings
We carry standard stock and RAL colors, but specialize in working with customers to create decorative and unique appearances for their specific needs. Our product catalog includes metallic, veins, textures and crinkle effects. We do expedient color matches and provide various other effects with... [See More]
- Dispensing Method: Sprayable
- Chemistry: Epoxy; Resin
- Type: Coating; Powder Coating; Paint
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
from FORREST Technical Coatings
FORREST Polyurethanes are designed to be long-lasting, highly-durable finishes with great color and gloss retention and excellent abrasion resistance. For use over multiple substrates in interior and exterior applications. 800 Series products comply with current environmental regulations in the... [See More]
- Dispensing Method: Sprayable
- Chemistry: Alkyd; Polyurethane; Resin
- Type: Coating; Clear Coat; Paint
- Substrate: Aluminum; Ceramic; Metallic; Plastic; Steel; Other; Fiberglass
from FORREST Technical Coatings
A high-gloss alkyd enamel designed for brush and roll application on metal surfaces. Excellent for marking safety equipment, safety hazards and piping to comply with OSHA color standards. Multiple stocked bases allow for tinting on demand. [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Alkyd; Resin; Glass Enamel
- Type: Coating; Enamel; Paint
- Substrate: Metallic; Steel; Wood
from FORREST Technical Coatings
A versatile water-reducible alkyd for use on metal substrates for interior and exterior exposure. A high-gloss product with excellent adhesion and corrosion resistance. [See More]
- Dispensing Method: Sprayable
- Substrate: Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from FORREST Technical Coatings
Originally engineered for high temperature resistance, INFERNEX ® L-1200 has proven itself a reliable coating for more than 30 years due to its unique blend of pigments in a silicone polymer resin. Designed for rapid curing and good film integrity, this product also provides good corrosion... [See More]
- Dispensing Method: Sprayable
- Substrate: Metallic; Steel
- Type: Coating; Paint
- Cure / Setting Technology: Film Drying
from Hubbard-Hall Inc.
Phosphate-Free Conversion Coatings. Hubbard-Hall's Emerald Paint-Prep line of low temperature and phosphate free conversion coatings offer a cost effective alternative to iron phosphate. Formulated to replace traditional iron phosphates, these coatings can reduce energy usage, environmental... [See More]
- Dispensing Method: Sprayable
- Chemistry: Conversion
- Type: Coating; Primer; Sealer
- Substrate: Metallic; Steel; Other; Aluminum and Zinc
from Aervoe Industries Incorporated
Quick-drying, asphalt-based material, forms a smooth, even, protective film [See More]
- Dispensing Method: Sprayable
- Chemistry: Resin
- Type: Coating; Primer
- Substrate: Concrete; Metallic; Plastic; Wood; Other; Vinyl
from Daikin America, Inc.
OPTOOL is fluorine compound which has very secific structure and has excellent fouling prevention performance. Especially it provides excellent fingerprint marking prevention capability. [See More]
- Dispensing Method: Sprayable
- Chemistry: Fluoropolymers; Resin; Fluorine
- Type: Coating; Anti-Fouling Agent for Lenses/Displays
- Substrate: Glass
from Whitford Corporation
Eterna for Cookware. A unique nonstick that breaks the rules: now 1 + 1=3! Eterna is unique technology in fluoropolymer composites that creates significant improvements in release properties greater than any individual fluoropolymer. In simple terms, 1 + 1=3!. 11 Key Facts About New Eterna. In the... [See More]
- Dispensing Method: Sprayable
- Substrate: Aluminum; Steel
- Type: Coating
- Thickness: 1.00E-3 to 0.0015
from R. S. Hughes Company, Inc.
3M 05917 corrosion inhibitor comes in gray and is packaged 12.75 per inner, 6 per case. Designed to have corrosion-inhibitor properties based on the zinc formulation. This corrosion inhibitor meets the following standards: ASTM B 117. [See More]
- Dispensing Method: Sprayable
- Form: Aerosol
- Type: Coating
- Features: Corrosion Resistant
from Houghton International, Inc.
Houghto-Coat ™ A-830 is a concentrated liquid chrome-phosphate used for aluminum pre-paint treatment. The product is used with the Houghto-Coat A-840 accelerator to prepare a chrome-phosphate bath that will produce an iridescent to olive green coating, which is an excellent base for paint. [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Inorganic (Silicate, Cement, Glaze); Conversion
- Type: Coating; Base Coat
- Substrate: Aluminum
from JARO Corp.
At Jaro Corp, we manufacture and apply our own dielectric coating: JARO 650 Series Polyimide. This coating is a proprietary polyimide thermo set material, offering outstanding characteristics which include: Remarkable resistance to high temperatures. It also performs well at cryogenic levels. High... [See More]
- Dispensing Method: Sprayable
- Chemistry: Polyimide
- Type: Coating; Nonconductive, Insulating Coating
- Substrate: Other; Electronic Component Substrates
from Owens Corning® FOAMGLAS® Insulation
A highly flexible, acrylic latex coating used with FOAMGLAS ® insulation where a superior weather barrier coating is required. It is available in colors and may be applied by glove, trowel, brush or spray. U.S. Stock Item. Available in standard 5 gallon pails. E.U. Stock Item. Available in... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Acrylic; Resin
- Type: Coating
- Cure / Setting Technology: Film Drying
from Crosslink
Coatings currently are available to prevent corrosion. However, many of them employ hexavalent chromium, a highly toxic chemical and known carcinogen. Current legislation in Europe (RoHS) and California (EWRA) are helping to phase out the use of this chemical.Crosslink offers a new, non-toxic smart... [See More]
- Dispensing Method: Sprayable
- Chemistry: Resin; Electroactive Polymer
- Type: Coating
- Substrate: Metallic
from Rust-Oleum Corporation
Industrial performance, zero VOC, zero HAP, odorless, single component [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Acrylic; Polyurethane; Resin
- Type: Enamel; Base Coat; Paint
- Substrate: Metallic; Steel
from Sherwin-Williams
Exterior Products. Whether it ’s new construction or a recoat, a single plane or a commercial fleet, we have the quality products you need to make every application last. Interior Primers. Aerospace Coatings offered by Sherwin-Williams are available in a variety of Primer products specifically... [See More]
- Dispensing Method: Sprayable
- Chemistry: Resin
- Type: Coating; Primer; Base Coat; Clear Coat; Paint
- Substrate: Metallic
from Sauereisen, Inc.
ConductCoat No. 2383 is a seamless, epoxy monolithic that provides a conductive or dissipative flooring system. ConductCoat exhibits a durable, high gloss finish that maintains its electrical. properties. [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Epoxy; Resin
- Type: Coating; Clear Coat
- Substrate: Concrete; Other; Vinyl Flooring
from Sherwin-Williams Protective & Marine Coatings
SherPlate 360 is a 100% solids epoxy coating, formulated specifically for immersion service in refined fuel storage tanks, petroleum tanks, CHT tanks, and ballast tanks. The high build, edge-retentive properties provide superior protection compared to conventional epoxies. 100% solids, low VOC. 1:1... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Epoxy; Resin
- Type: Coating
- Substrate: Concrete; Steel; Other; Iron
from Acoustical Solutions, Inc.
Sound Damping Compound is a water based damping compound for the treatment of vibrating metal, wood, glass, ceramic and most plastic surfaces. This material imparts vibration damping and a shift in the dominant frequency. The resulting structure borne noise reduction provides a means of improving... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Resin; Rubber
- Type: Coating; Sound Damping
- Substrate: Aluminum; Anodized; Ceramic; Glass; Metallic; Plastic; Steel; Wood
from Epoxies Etc...
30-3019 is an unfilled, 100% solids, very low viscosity epoxy resin system. It can also be used as a potting/casting compound in small quantities; usually less than 30 grams of material. 30-3019 can be applied by brush, spray, or dip. [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Epoxy; Resin
- Type: Coating
- Cure / Setting Technology: Multicomponent; Thermoset
from Wacker Chemical Corp.
ELASTOSIL ® A 8 is a one part UV curable silicone elastomer. Special features. Rapid UV cure. Solvent-free. Shadow cure. Low viscosity. Application. ELASTOSIL ® A 8 is a protective coating designed to be used as a gasket saturant. [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Resin; Silicone
- Type: Coating; Sealer; Gasket Saturant
- Cure / Setting Technology: Ultraviolet Light Curing
from Valspar Corporation (The)
Since 1915, Guardsman has been a leader in caring for wood furniture. We started out making wood finishes for fine furniture, and created our wood care products to show off those finishes to their best advantage. Today, we offer a complete line of products designed to clean, protect and enhance the... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Substrate: Wood; Other; Fabric
- Type: Coating; Sealer
- Cure / Setting Technology: Film Drying
from Redwood Plastics
Wearlon Super F-4 is the hardest in the line of Wearlon coatings, improving abrasion resistance and prolonging the life of your propeller. It is a water based, environmentally friendly coating that can be painted or sprayed on. Wearlon Super F-4 is a non-stick foul release coating that minimizes... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Substrate: Aluminum
- Type: Coating; Non-Stick Foul Release
- Cure / Setting Technology: Film Drying
from Dampney Company, Inc.
One component, boiling water / steam immersion coating to 700F (371C) [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Substrate: Metallic; Steel
- Type: Coating
- Cure / Setting Technology: Film Drying
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Elastomeric Coating EC-2241 is a white, synthetic based product which has found use in the aerospace industry as a protective coating for rubber and cork. [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Substrate: Other; Rubber, and Cork
- Type: Coating
- Cure / Setting Technology: Film Drying
from Chase Products Co.
Champion Sprayon ® Anti-Fog Plexiglass Cleaner makes cleaning easier and faster. Leaves a protective coating that repels dirt, dust, finger smudges, scratches and water spots. Contains no abrasives, silicones or ammonia. Foaming plexiglass cleaner and protectant. Does not contain ammonia,... [See More]
- Dispensing Method: Sprayable
- Substrate: Other; Plexiglass
- Type: Coating
- Form: Aerosol
from Whitford Corporation
Excellent glass run coating with outstanding performance to Toyota, Suzuki and GM specifications. [See More]
- Dispensing Method: Sprayable
- Cure / Setting Technology: Film Drying
- Type: Coating
- Cure Temperature: 302 to 374
from R. S. Hughes Company, Inc.
3M 06839 overspray protective coatings comes in clear and is packaged 1 gal per inner, 4 per case. [See More]
- Dispensing Method: Sprayable
- Form: Aerosol
- Type: Coating
from Owens Corning® FOAMGLAS® Insulation
A low temperature anti-abrasive (LTAA) coating that reduces abrasion from vibrating piping or equipment by providing a durable bore coating to insulation substrates across a wide range of service temperatures. Product is idea for application to FOAMGLAS ® insulation blocks, curved segments... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Rubber
- Type: Coating
- Substrate: Other; Insulation
from Rust-Oleum Corporation
High heat resistance, two coat system for exterior heat exposure conditions [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Resin; Zinc; Metal Filled; Silicone
- Type: Coating; Base Coat; Paint
- Substrate: Metallic; Steel
from Sherwin-Williams
Sherwin-Williams is a global manufacturing leader of automotive refinishing products. With a vast array of products to fit every need, Sherwin-Williams Automotive Finishes has you covered. [See More]
- Dispensing Method: Sprayable
- Chemistry: Acrylic; Resin
- Type: Coating; Enamel; Primer; Base Coat; Paint
- Substrate: Metallic
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®1000 HS is a high solids, heavy duty, two-component, catalyzed, polyamide epoxy coating formulated for demanding marine and industrial requirements. This dries rapidly to a tough, high gloss finish with excellent resistance to alkalies, abrasion, corrosion, and chemical attack. [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Epoxy; Resin; Polyamide
- Type: Coating
- Substrate: Concrete; Steel; Wood
from Epoxies Etc...
Deco-Coat 2550 Resin System is a two component, low viscosity, flexible epoxy decorative coating. This versatile coating is a liquid resin that is safe and easy to use. It does not contain any solvents or offensive odors. [See More]
- Dispensing Method: Sprayable
- Chemistry: Epoxy; Resin
- Type: Coating; Clear Coat
- Substrate: Concrete; Glass; Metallic; Plastic; Wood
from Valspar Corporation (The)
GENERAL PURPOSE. Indoors or out, whatever the surface, choose the finest multi-purpose enamel paint available for a durable, flawless finish that is scratch- and water-resistant. PRIMER. Get your project off to the best start possible with job-specific formulations that cover a wide range of... [See More]
- Dispensing Method: Sprayable
- Chemistry: Resin; Vinyl
- Type: Coating; Enamel; Lacquer Paint; Primer; Base Coat; Clear Coat; Paint
- Substrate: Metallic
from Dampney Company, Inc.
One component, fresh / salt water immersion coating from -40F to 140F (-40C to 60C) [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Substrate: Metallic; Steel
- Type: Coating
- Cure / Setting Technology: Film Drying
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Metal Primer EC-3901 is a primer for 3M ™ Scotch-Weld ™ film and liquid adhesives in those applications where it is desired to obtain improved metal and glass adhesion. 3M ™ Scotch-Weld ™ Metal Primer EC-3901 improves resistance to environmental... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Silane Based
- Type: Coating; Primer; Adhesive Primer
- Substrate: Metallic
from Chase Products Co.
Champion Sprayon ® Stainless Steel Cleaner, Polish and Protectant is a unique oil-in-water emulsion that quickly cleans, shines and protects without scratching. Heavy-duty cleaning agents and surfactants deep-clean, and remove smudges, soil, oil and grease stains, water marks and rust without... [See More]
- Dispensing Method: Sprayable
- Substrate: Metallic; Steel
- Type: Coating
- Form: Aerosol
from Whitford Corporation
QuanTanium for Cookware. QuanTanium is an internally reinforced, waterborne, multicoat. It incorporates a unique mix of titanium particles blended into the coating that stands up to almost anything. The excellent scratch resistance produced by the incorporation of titanium particles causes the... [See More]
- Dispensing Method: Sprayable
- Substrate: Aluminum; Steel
- Type: Coating
- Industry: Food / Beverage
from R. S. Hughes Company, Inc.
3M 06840 overspray protective coatings comes in clear and is packaged 5 gal per inner, 1 per case. [See More]
- Dispensing Method: Sprayable
- Form: Aerosol
- Type: Coating
from Owens Corning® FOAMGLAS® Insulation
A silicone-based, single-component coating, sealant and adhesive which cures by reaction with humidity. It is odorless, free of solvents, isocyanates and PVC. It provides good weathering, UV and mechanical resistance, as well as excellent chemical resistance, and is classified as a flame retardant... [See More]
- Dispensing Method: Sprayable
- Chemistry: Resin
- Type: Coating
- Cure / Setting Technology: Reactive or Moisture Cured
from Rust-Oleum Corporation
Modified silicone aluminum & colored finishes, high heat exposed surfaces [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Aluminum; Resin; Metal Filled; Silicone
- Type: Coating; Primer (optional feature); Clear Coat (optional feature); Paint
- Substrate: Metallic; Steel
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®HS POLYURETHANE FLOOR ENAMEL is a heavy duty, two component, exterior/interior, low VOC, high solids, polyester-aliphatic urethane industrial floor coating. Provides a high gloss, excellent chemical resistance, color retention, and chalk resistance. Outstanding resistance a wide... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Polyurethane; Resin
- Type: Coating; Enamel
- Substrate: Concrete; Steel; Other; Iron
from Epoxies Etc...
Low viscosity ultraviolet curable coating. This is an electronic grade material which will provide chemical, moisture and vibration protection. [See More]
- Dispensing Method: Sprayable
- Chemistry: Resin
- Type: Coating; Clear Coat
- Cure / Setting Technology: Ultraviolet Light Curing
from Valspar Corporation (The)
Protect and beautify toys, swing sets, railings, mailboxes, patio furniture and much more! Use Anti-Rust Armor Primer to seal surface before painting with Anti-Rust Armor Enamel for best results. Maximum Anti-Rust Protection. Heavy Duty. Superior durability. Moisture & Chemical Resistant. For... [See More]
- Dispensing Method: Sprayable
- Cure / Setting Technology: Film Drying
- Type: Coating; Clear Coat; Paint
- Form: Aerosol
from Dampney Company, Inc.
Elastoid 1300 is a single-package, high-build, elastomeric coating and vapor barrier. It is formulated from multiphase synthetic rubber copolymers which interact to provide an unusual range of desirable chemical and physical properties. It is tough, flexible, and corrosion-resistant and provides... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Rubber
- Type: Coating
- Substrate: Aluminum; Concrete; Metallic; Steel
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Structural Adhesive Primer EC-1290 is a sprayable primer suggested for use with 3M ™ Scotch-Weld ™ Structural Adhesive Films AF-6, AF-10 and AF-13. Simplify production scheduling by protecting the cleaned surfaces until the bonding operations can be... [See More]
- Dispensing Method: Sprayable
- Chemistry: Resin; Formaldehyde Resins (Phenolic, Furan, Melamine)
- Type: Coating; Primer; Adhesive Primer
- Substrate: Aluminum; Metallic
from Chase Products Co.
Cold Galvanizing 95 is a complete zinc metal spray which rustproofs any metal surface with thorough protection that lasts for years. It is equivalent to a hot galvanizing treatment as it fuses and adheres to all metal surfaces, stopping corrosion immediately. Zinc used in this product is 95% pure. [See More]
- Dispensing Method: Sprayable
- Chemistry: Zinc; Metal Filled
- Type: Coating
- Substrate: Aluminum; Metallic; Steel
from R. S. Hughes Company, Inc.
3M 08881 undercoating comes in black and is packaged 16 oz per inner, 6 per case. Can be used with metal. Cure time should always be considered on any application or project. Once applied, this product requires a 30 min cure time before it is fully set and provides maximum strength. [See More]
- Dispensing Method: Sprayable
- Form: Aerosol
- Type: Coating
from Owens Corning® FOAMGLAS® Insulation
A liquid applied moisture cure vapor retarder coating especially formulated for use with FOAMGLAS ® insulation. PITTCOTE ® 300E coating can be used as a protective/vapor retarder coating over FOAMGLAS ® insulation under metal jacket or other UV resistant finish or as vapor retarder... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Substrate: Asphalt (optional feature); Metallic (optional feature)
- Type: Coating
- Cure / Setting Technology: Reactive or Moisture Cured
from Rust-Oleum Corporation
15 oz Aerosol; Safety Blue; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Dispensing Method: Sprayable
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
EnviroLastic ® AR170 is a 100% solids spray applied, aromatic polyurea hybrid coating system, which exhibits extraordinary toughness and elastomeric performance characteristics. It can be applied at thicknesses of 30 to 125 mils in multiple passes during a single application. Fast cure - short... [See More]
- Dispensing Method: Sprayable
- Chemistry: Resin
- Type: Coating
- Substrate: Concrete; Metallic; Steel; Wood; Other; Structural Foam
from Valspar Corporation (The)
Valspar Premium Spray Paint is simply the finest multi-purpose spray paint available. Sold through Lowe's Home Improvement, and independent hardware and paint stores, Valspar Premium is available in a range of finishes to suit your chosen application. Multi-purpose spray paint for use on virtually... [See More]
- Dispensing Method: Sprayable
- Cure / Setting Technology: Film Drying
- Type: Coating; Clear Coat; Paint
- Form: Aerosol
from Dampney Company, Inc.
Wash Primer Metal Conditioner for galvanized or aluminum surfaces for high temperature surfaces and can be topcoated with the 200 or 230 series. Used for galvanized or aluminum surfaces and meets MIL-C-15328VB coating pre-treatment (formula 117 for metals). [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Resin; Vinyl; Metal Filled
- Type: Coating; Primer
- Substrate: Aluminum; Metallic; Steel
from 3M Aerospace and Aircraft Maintenance Division
Use with AF-163-2 Bonding Films. Sprayable or Brushable, Curing Type. High Degree of Protection Against Corrosive Environments Both Inside and Outside the Bond Line. [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Epoxy; Resin
- Type: Coating; Primer; Adhesive Primer
- Substrate: Aluminum; Metallic
from Chase Products Co.
CS+ Lubricant is a 4-way lube that stops annoying squeaks, guards against rust and corrosion, releases rusted or frozen metal parts with instant penetration, and removes moisture. It will displace water and moisture-proof all types of electrical equipment, relay switches, wet engines, distributors,... [See More]
- Dispensing Method: Sprayable
- Substrate: Aluminum; Metallic; Steel
- Type: Coating
- Cure / Setting Technology: Multicomponent
from R. S. Hughes Company, Inc.
3M 08882 undercoating comes in black and is packaged 12.75 oz per inner, 6 per case. Can be used with metal. Cure time should always be considered on any application or project. Once applied, this product requires a 30 min cure time before it is fully set and provides maximum strength. [See More]
- Dispensing Method: Sprayable
- Form: Aerosol
- Type: Coating
from Rust-Oleum Corporation
15 oz Aerosol; Safety Yellow; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Dispensing Method: Sprayable
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
2K WATERBASED URETHANE ANTI-GRAFFITI COATING is a two component, low VOC, super-hydrophobic polyurethane. It provides excellent graffiti resistance, color and gloss retention. Low odor, Low VOC. Excellent anti-graffi ti resistance. Apply over multiple coating types. Brush, roll or spray. Waterbased... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Polyurethane; Resin
- Type: Coating
- Cure / Setting Technology: Film Drying; Multicomponent
from Dampney Company, Inc.
A water-borne copolymer that is designed for application to rusted ferrous metal surfaces. When properly applied the coating converts the rusted surface to a dark, stable organic iron compound. This product has a low permeability factor and is impermeable to oxygen and moisture while providing a... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Resin; Copolymer
- Type: Coating; Rust Conversion
- Substrate: Metallic; Steel
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Structural Adhesive Primer EC-3960 is a sprayable corrosion inhibiting adhesive primer. It provides a high degree of protection against corrosive environments both inside and outside the adhesive bondline. It is suggested for use with 3M ™ Scotch-Weld ™... [See More]
- Dispensing Method: Sprayable
- Chemistry: Epoxy; Resin
- Type: Coating; Primer; Adhesive Primer
- Substrate: Aluminum; Metallic
from Chase Products Co.
Galv-Off ® removes the buildup of galvanization, softening it so that it flakes off by itself. Even stubborn deposits can be removed with frequent application. When used daily, it not only prevents harmful deposits from accumulating, but it also lubricates and protects rollers and dies. The... [See More]
- Dispensing Method: Sprayable
- Form: Aerosol
- Type: Coating
- Features: Corrosion Resistant; Protective
from R. S. Hughes Company, Inc.
3M 08883 undercoating comes in black and is packaged 19.7 oz per inner, 6 per case. Can be used with metal. Cure time should always be considered on any application or project. Once applied, this product requires a 24 hr cure time before it is fully set and provides maximum strength. [See More]
- Dispensing Method: Sprayable
- Form: Aerosol
- Type: Coating
from Rust-Oleum Corporation
15 oz, Aerosol Can; Red; Used with V2100 System Enamel Aerosol; for Corrosion Protection; Used on rusted, bare, or previously painted metal; Fast Dry; Temperatures up to 200°F; Enamel Primer [See More]
- Dispensing Method: Sprayable
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
General Polymers AIRCRAFT HANGAR / INDUSTRIAL PLANT COATING is designed to provide a thin-mil, light reflective, and chemical resistant finish. Advantages. Excellent gloss retention. UV color stability. Chemical and stain resistant. Resists common acids, fuels grease, salt and Skydrol. Uses. [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Substrate: Concrete; Wood; Other; Quarry Tile
- Type: Coating
- Cure / Setting Technology: Film Drying; Multicomponent
from Dampney Company, Inc.
Endcor 772 protects steel surfaces subjected to immersion in fresh or salt water, exposure in tidal or splash zones, or burial in soil. It is effective on the interiors of tanks and lines containing brine, crude oil, petroleum products, sewage or strong alkalies. It is resistant to a wide range of... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Epoxy; Resin
- Type: Coating; Clear Coat
- Substrate: Metallic; Steel
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Structural Adhesive Primer EW-5000 AS is a sprayable, low VOC, heat curing, structural adhesive primer that contains a non-chromated, corrosion inhibiting package to provide protection against corrosive environments. Complies witrh OSHA 29 CFR 1910.1026. Less than 5... [See More]
- Dispensing Method: Sprayable
- Substrate: Aluminum; Metallic
- Type: Coating; Primer; Adhesive Primer
- Form: Liquid; Water
from Chase Products Co.
Penetrating Oil and Demoisturant will displace water and moisture-proof all types of electrical equipment, even if the equipment is completely submerged. It saves production, maintenance and repair time, protects and preserves valuable equipment, waterproofs ignition systems, and protects metal... [See More]
- Dispensing Method: Sprayable
- Substrate: Metallic
- Type: Coating
- Cure / Setting Technology: Multicomponent
from R. S. Hughes Company, Inc.
3M 08889 rocker panel coating comes in clear and is packaged 23 oz per inner, 6 per case. [See More]
- Dispensing Method: Sprayable
- Form: Aerosol
- Type: Coating
from Rust-Oleum Corporation
15 oz Aerosol; Flat Black; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Dispensing Method: Sprayable
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
General Polymers AquArmor Ceramic Carpet Decorative Flooring Systems combines the historical advantages of epoxy quartz flooring with integral protection against loss of bond due to moisture vapor issues for slabs on grade. Advantages. Withstands vapor emissons. Aesthetically pleasing appearance. [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Epoxy; Resin
- Type: Coating
- Substrate: Concrete; Wood; Other; Quarry Tile
from Dampney Company, Inc.
Heat resistant coatings, color stable ambient to 500F (260C) [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Resin; Silicone
- Type: Coating; Clear Coat
- Substrate: Metallic; Steel; Other; Stainless Steel
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Structural Adhesive Primer EW-5000 is a sprayable, waterbased, low VOC, heat curing, chromated, corrosion inhibiting primer that can provide protection against corrosive environments. Scotch-Weld EW-5000 primer is designed to provide ambient temperature drying with... [See More]
- Dispensing Method: Sprayable
- Substrate: Aluminum; Metallic
- Type: Coating; Primer; Adhesive Primer
- Form: Liquid; Water
from Chase Products Co.
Silicone Lubricant frees sticking mechanisms, eliminates fan belt squeaks, metal-to-metal noises and rubber-to-metal squeaks. It repels water and ice and retards rust and corrosion, lubricates hinges and prevents freezing of exposed locks. Excellent for waterproofing ignition systems and other... [See More]
- Dispensing Method: Sprayable
- Substrate: Metallic
- Type: Coating; Primer
- Cure / Setting Technology: Multicomponent
from R. S. Hughes Company, Inc.
3M 08892 wax comes in tan and is packaged 18.75 oz per inner, 6 per case. Can be used with metal. [See More]
- Dispensing Method: Sprayable
- Form: Aerosol
- Type: Coating
from Rust-Oleum Corporation
15 oz Aerosol; Gloss Black; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Dispensing Method: Sprayable
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
General Polymers AquArmor MOISTURE CONTROL SYSTEM is a low odor, self-leveling system to be applied to concrete to control moisture vapor emissions. AquArmor MOISTURE CONTROL SYSTEM can be applied with a v-notched trowel/squeegee. It is designed to provide a refinished surface on concrete prior to... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Substrate: Concrete; Wood; Other; Quarry Tile
- Type: Coating
- Cure / Setting Technology: Film Drying; Multicomponent
from Dampney Company, Inc.
Heat resistant coatings color stable to 500F [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Resin; Silicone
- Type: Coating; Clear Coat
- Substrate: Metallic; Steel; Other; Stainless Steel
from Chase Products Co.
Silicone Mold Release Spray is a colorless, dry spray that reduces friction and buildup on molds without leaving an oily or greasy surface. Dries fast. Extends the life of equipment. Cuts cleanup time. This non-staining formula has a low surface tension and performs in temperatures from -47 °F... [See More]
- Dispensing Method: Sprayable
- Substrate: Glass; Metallic; Wood; Other; Rubber
- Type: Coating
- Cure / Setting Technology: Multicomponent
from R. S. Hughes Company, Inc.
3M 16-501 zinc spray comes in gray and is packaged 12 per case. Designed to have rust-preventative properties based on the zinc formulation. [See More]
- Dispensing Method: Sprayable
- Form: Aerosol
- Type: Coating
- Features: Corrosion Resistant
from Rust-Oleum Corporation
15 oz Aerosol Can; Gray; Used with V2100 System Enamel Aerosol; for Corrosion Protection; Used on rusted, bare, or previously painted metal; Fast Dry; Temperatures up to 200°F; Enamel Primer [See More]
- Dispensing Method: Sprayable
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
General Polymers AquArmor S Slurry System represents a family of flooring systems all built using a single revolutionary new water-based resin technology, AquArmor WBE. System designs include a coating and a 1/16 ” to 1/8 ” slurry. All systems are installed quickly, environmentally... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Substrate: Concrete; Wood; Other; Quarry Tile
- Type: Coating
- Cure / Setting Technology: Film Drying; Multicomponent
from Dampney Company, Inc.
Zinc silicone primer, heat resistant ambient to 500F (260C) [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Resin; Zinc; Silicone
- Type: Coating; Primer
- Substrate: Metallic; Steel
from R. S. Hughes Company, Inc.
3M 39034 wax comes in brown and is packaged 16 oz per inner, 4 per case. Can be used with metal. [See More]
- Dispensing Method: Sprayable
- Form: Aerosol
- Type: Coating
from Rust-Oleum Corporation
15 oz Aerosol; Dark Machine Gray; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Dispensing Method: Sprayable
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
Bond-Plex WB Acrylic is a single component, waterborne acrylic, adhesion promoting coating formulated for direct application to pre-finished metal siding. Suitable for interior or exterior use. Outstanding early moisture resistance. Outstanding exterior durability and gloss retention. Eliminates the... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Acrylic; Aluminum; Resin; Metal Filled (optional feature)
- Type: Coating
- Substrate: Metallic; Other; Fluorocarbons, Silicone Polyesters
from Dampney Company, Inc.
Zinc silicone primer heat resistant to 500F [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Resin; Zinc; Silicone
- Type: Coating; Primer
- Substrate: Metallic; Steel
from R. S. Hughes Company, Inc.
3M 03584 rubberized undercoating comes in black and is packaged 1 each. [See More]
- Dispensing Method: Sprayable
- Form: Aerosol
- Type: Coating
- Features: Corrosion Resistant
from Rust-Oleum Corporation
15 oz Aerosol; Gloss White; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Dispensing Method: Sprayable
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
General Polymers CERAMIC CARPET #400 is an 1/8 ” system which incorporates decorative colored quartz aggregates with high solids epoxy resins and chemical resistant grout and topycoats to form a protective surfacing system which is aesthetically pleasing, slip resistant, durable and resistant... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Ceramic; Epoxy; Resin
- Type: Coating
- Substrate: Concrete; Wood; Other; Quarry Tile
from Dampney Company, Inc.
For under insulation, boiling water immersion grade, apply directly to hot steel up to 350F(176C) with service temperatures up to 450F (232C) [See More]
- Dispensing Method: Sprayable
- Chemistry: Resin; Silicone
- Type: Coating; Primer
- Substrate: Metallic; Steel; Other; Stainless Steel
from R. S. Hughes Company, Inc.
3M Bondo 737 undercoating comes in black and is packaged 18 oz per inner, 6 per case. Cure time should always be considered on any application or project. Once applied, this product requires a 24 hr cure time before it is fully set and provides maximum strength. [See More]
- Dispensing Method: Sprayable
- Form: Aerosol
- Type: Coating
from Rust-Oleum Corporation
Fast drying, multi-purpose, modified-alkyd enamel aerosol, indoor/outdoor [See More]
- Dispensing Method: Sprayable
- Chemistry: Alkyd; Resin
- Type: Coating; Enamel; Base Coat; Paint
- Substrate: Metallic; Steel
from Sherwin-Williams Protective & Marine Coatings
General Polymers CERAMIC CARPET #554 combines EPO-FLEX ® crack isolation system with colored quartz aggregate to provide the toughness and flexibility of EPO-FLEX with the beauty and durability of quartz broadcast flooring. Flexibility is achieved without the use of plasticizers or other... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Ceramic
- Type: Coating
- Substrate: Concrete; Wood; Other; Quarry Tile
from Dampney Company, Inc.
VOC compliant, high build coating from 300F to 1000F (148C to 538C) [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Resin; Silicone
- Type: Coating
- Substrate: Metallic; Steel; Other; Stainless Steel
from R. S. Hughes Company, Inc.
3M Mar-Hyde 3509 rust converter comes in clear and is packaged 10 oz per inner, 12 per case. Can be used with steel. Cure time should always be considered on any application or project. Once applied, this product requires a 12 hr cure time before it is fully set and provides maximum strength. [See More]
- Dispensing Method: Sprayable
- Form: Aerosol
- Type: Coating
from Rust-Oleum Corporation
12 oz Aerosol Can; Safety Blue; 12 min to Tack-free Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; Premium brand from Rustoleum; Multipurpose Paint [See More]
- Dispensing Method: Sprayable
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
Corothane ® II is a 2-component, VOC compliant, aliphatic acrylic modified polyurethane designed for use in industrial environments. A chemical and abrasion resistant urethane enamel. A heavy duty maintenance coating for use in "high visibility areas. RECOMMENDED USAGE. Use over prepared... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Acrylic; Polyurethane; Resin; Aliphatic
- Type: Coating; Enamel
- Substrate: Aluminum; Concrete; Steel; Other; Iron, Galvanizing
from Dampney Company, Inc.
Heat resistant coatings stable to 1000F [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Resin; Silicone
- Type: Coating; Clear Coat
- Substrate: Metallic; Steel; Other; Stainless Steel
from R. S. Hughes Company, Inc.
3M Mar-Hyde 3811 trim coating comes in black and is packaged 12 oz per inner, 12 per case. Can be used with brass, plastic, steel. [See More]
- Dispensing Method: Sprayable
- Form: Aerosol
- Type: Coating
from Rust-Oleum Corporation
12 oz, Aerosol Can; Gray Primer; Used with 1600 System Enamel Aerosol; Provides a solid base for adhesion of topcoat; Wet or dry Sandable; Use on wood, metal, masonry, etc.; Fast Dry; Temperatures up to 200°F; Enamel Primer [See More]
- Dispensing Method: Sprayable
- Substrate: Aluminum; Concrete; Metallic; Steel; Wood
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
General Polymers TPM #115-U1 DECORATIVE TROWELED SYSTEM is a 3/16 ” protective resurfacing systems utilizing an epoxy and silica aggregates mortar, high build grout and seal coats and selected decorative aggregates where a heavy duty decorative flooring system is required. Advantages. Low VOC... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Epoxy; Resin; Silica Aggregates Mortar, High Build Grout
- Type: Coating
- Substrate: Concrete; Wood; Other; Quarry Tile
from Dampney Company, Inc.
Heat resistant coatings, color stable ambient to 1000F (538C). [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Resin; Silicone
- Type: Coating; Clear Coat
- Substrate: Metallic; Steel; Other; Stainless Steel
from R. S. Hughes Company, Inc.
3M Mar-Hyde 3821 trim coating comes in gray and is packaged 1 can per pack, 12 per case. Can be used with aluminum, plastic, steel. Cure time should always be considered on any application or project. Once applied, this product requires a 2 hr cure time before it is fully set and provides maximum... [See More]
- Dispensing Method: Sprayable
- Form: Aerosol
- Type: Coating
from Rust-Oleum Corporation
Two component, high solid polyamide converted epoxy, refined coal tar pitch [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Epoxy; Resin
- Type: Coating; Clear Coat
- Substrate: Concrete; Metallic; Steel
from Sherwin-Williams Protective & Marine Coatings
DTM ACRYLIC COATING is a 100% acrylic, water reducible, corrosion resistant coating for light to moderate industrial use. Designed for new construction or maintenance use and can be used directly over prepared substrates. Chemical resistant. Corrosion resistant. Fast dry. Low odor. Flash rust/early... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Acrylic; Resin
- Type: Coating
- Substrate: Aluminum; Concrete; Steel; Wood; Other; Galvanizing, Drywall, Zinc Rich Primers
from Dampney Company, Inc.
Heat resistant coatings from 1100F to 1400F (593C to 760C) [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Inorganic (Silicate, Cement, Glaze); Ceramic; Resin; Silicone
- Type: Coating
- Substrate: Metallic; Steel; Other; Stainless Steel