Brush / Roll-on Industrial Coatings
from FORREST Technical Coatings
A corrosion-resistant polyamide epoxy primer for use under high performance fast-dry topcoats. [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Epoxy; Resin
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Steel
from Mid-Mountain Materials, Inc.
Thermoseal ® Thermal Coatings are high-temperature coatings excellent for use as protection against flame erosion, molten metal corrosion, and thermal spalling. Our coatings are easily applied by rolling, dipping, or spraying. [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Substrate: Ceramic
- Type: Coating
- Cure / Setting Technology: Film Drying
from FORREST Technical Coatings
FORREST two-part epoxy coatings provide excellent solvent and corrosion resistance for industrial applications. Ideal for areas where a higher level of performance is required for chemical or solvent exposure. [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Epoxy; Resin
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Steel
from FORREST Technical Coatings
A high-gloss alkyd enamel designed for brush and roll application on metal surfaces. Excellent for marking safety equipment, safety hazards and piping to comply with OSHA color standards. Multiple stocked bases allow for tinting on demand. [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Alkyd; Resin; Glass Enamel
- Type: Coating; Enamel; Paint
- Substrate: Metallic; Steel; Wood
from FORREST Technical Coatings
A high-performance, two-part polyamide epoxy system formulated to protect surfaces exposed to chemicals, solvents or abrasion. Suitable for application on new equipment, structural steel and concrete. Available in non-skid for floor applications. [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Epoxy; Resin
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Steel
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Exterior primers assure superior hiding, topcoat appearance and long-lasting results. Commercial High-Performance Coatings. A comprehensive line-up of high-performance coatings... [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Acrylic; Alkyd; Resin
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
from Dryvit UK
Acrylic coating for changing the colour of existing Dryvit finishes or use with Custom Brick. Dryvit ’s exterior coatings have been formulated to outperform traditional exterior paints. Based on high performance acrylic and silicone technologies these finishes are the ideal solution for... [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Acrylic; Resin
- Type: Coating; Paint
- Cure / Setting Technology: Film Drying
from Houghton International, Inc.
Houghto-Coat ™ A-830 is a concentrated liquid chrome-phosphate used for aluminum pre-paint treatment. The product is used with the Houghto-Coat A-840 accelerator to prepare a chrome-phosphate bath that will produce an iridescent to olive green coating, which is an excellent base for paint. [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Inorganic (Silicate, Cement, Glaze); Conversion
- Type: Coating; Base Coat
- Substrate: Aluminum
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Elastomeric Coating EC-2241 is a white, synthetic based product which has found use in the aerospace industry as a protective coating for rubber and cork. [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Substrate: Other; Rubber, and Cork
- Type: Coating
- Cure / Setting Technology: Film Drying
from Valspar Corporation (The)
Performance and Value that nobody can match. In the Valspar Automotive Group, our mission is to provide the highest performing products at great values, while constantly striving to meet the changing needs of our customers. Through our De Beer, Valspar Refinish, and Plasti-Kote brands, we continue... [See More]
- Dispensing Method: Brush / Roll-on
- Substrate: Metallic
- Type: Coating; Primer; Base Coat; Clear Coat; Paint
- Cure / Setting Technology: Film Drying
from ZIRCAR Refractory Composites, Inc.
ZIRCARMold Mix 6 is a refractory-molding compound designed to allow replication of three-dimensional objects in glass. It comes as a paste, which is applied to a suitably prepared pattern and hardens on drying. Properly prepared molds of Mold Mix 6 will resolve the finest details and possess good... [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Inorganic (Silicate, Cement, Glaze); Ceramic
- Type: Coating; Refractory Molding Compound
- Substrate: Glass
from Berry Plastics Corporation - Engineered Materials Division
Polyken 1027. LIQUID ADHESIVE/PRIMER. Polyken 1027 liquid adhesive system is ideal for slower machine application to rough, reconditioned, or grit-blasted pipe surfaces. It provides a uniformly smooth, instant tack surface for Polyken coating systems. Applications. Solvent based primer designed for... [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Resin; Rubber
- Type: Coating; Primer
- Substrate: Concrete; Metallic; Steel; Wood
from Rust-Oleum Corporation
Acrylic aliphatic urethane, high gloss, two component, gloss retention [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Acrylic; Polyurethane; Resin
- Type: Coating; Enamel; Base Coat
- Substrate: Aluminum; Concrete; Metallic; Steel
from Dampney Company, Inc.
One component, boiling water / steam immersion coating to 700F (371C) [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Substrate: Metallic; Steel
- Type: Coating
- Cure / Setting Technology: Film Drying
from Acoustical Solutions, Inc.
Sound Damping Compound is a water based damping compound for the treatment of vibrating metal, wood, glass, ceramic and most plastic surfaces. This material imparts vibration damping and a shift in the dominant frequency. The resulting structure borne noise reduction provides a means of improving... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Resin; Rubber
- Type: Coating; Sound Damping
- Substrate: Aluminum; Anodized; Ceramic; Glass; Metallic; Plastic; Steel; Wood
from Owens Corning® FOAMGLAS® Insulation
A highly flexible, acrylic latex coating used with FOAMGLAS ® insulation where a superior weather barrier coating is required. It is available in colors and may be applied by glove, trowel, brush or spray. U.S. Stock Item. Available in standard 5 gallon pails. E.U. Stock Item. Available in... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Acrylic; Resin
- Type: Coating
- Cure / Setting Technology: Film Drying
from Sauereisen, Inc.
Arctikure No. 230 is a three-component epoxy monolithic floor system that is used to protect concrete and other substrates from chemical and physical abuse. No. 230 is designed for cold room applications and will cure at temperatures as low as 35oF. Arctikure has the durability to withstand the... [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Epoxy; Resin
- Type: Coating; Base Coat
- Substrate: Concrete
from Sherwin-Williams Protective & Marine Coatings
SherPlate 360 is a 100% solids epoxy coating, formulated specifically for immersion service in refined fuel storage tanks, petroleum tanks, CHT tanks, and ballast tanks. The high build, edge-retentive properties provide superior protection compared to conventional epoxies. 100% solids, low VOC. 1:1... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Epoxy; Resin
- Type: Coating
- Substrate: Concrete; Steel; Other; Iron
from RDM Industrial Products, Inc.
Specially formulated to protect conductive/dissipative flooring, this finish will lengthen its life. It offers long lasting, high gloss, static dissipative properties. With low a VOC level this product is as safe as it is easy to use. Resistance: 107-109 Ohms/sq. Durable. Facilitates dirt removal. [See More]
- Dispensing Method: Brush / Roll-on
- Substrate: Ceramic; Plastic
- Type: Coating; Clear Coat
- Cure / Setting Technology: Film Drying
from Bluestar Silicones USA Corp.
Properties. Viscosity 1. Description. BLUESIL ™ V-04 BLU primer is a dilute solution of a reactive silicone resin in naphtha used as an. adhesion promoter with Bluestar Silicones moldmaking and tooling grade materials. [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Resin; Silicone
- Type: Coating; Primer
- Substrate: Plastic
from Wacker Chemical Corp.
ELASTOSIL ® E303 is a free flowable, solvent-based RTV-1 silicone dispersion. It cures at room temperature or elevated temperature by reaction with air humidity to a flexible silicone coating. Special features. acetoxy curing system. ready-to-use, one-component material. low viscosity. solvent... [See More]
- Dispensing Method: Brush / Roll-on; Printing / Screen
- Chemistry: Resin; Silicone
- Type: Coating; Sealer
- Cure / Setting Technology: Film Drying
from Epoxies Etc...
30-3019 is an unfilled, 100% solids, very low viscosity epoxy resin system. It can also be used as a potting/casting compound in small quantities; usually less than 30 grams of material. 30-3019 can be applied by brush, spray, or dip. [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Epoxy; Resin
- Type: Coating
- Cure / Setting Technology: Multicomponent; Thermoset
from Redwood Plastics
Wearlon Super F-4 is the hardest in the line of Wearlon coatings, improving abrasion resistance and prolonging the life of your propeller. It is a water based, environmentally friendly coating that can be painted or sprayed on. Wearlon Super F-4 is a non-stick foul release coating that minimizes... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Substrate: Aluminum
- Type: Coating; Non-Stick Foul Release
- Cure / Setting Technology: Film Drying
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Exterior primers assure superior hiding, topcoat appearance and long-lasting results. Commercial High-Performance Coatings. A comprehensive line-up of high-performance coatings... [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Acrylic; Alkyd; Resin
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
from Dryvit UK
Interior/exterior acrylic PMR coating in standard and custom colours. Dryvit ’s exterior coatings have been formulated to outperform traditional exterior paints. Based on high performance acrylic and silicone technologies these finishes are the ideal solution for refurbishment or new build. [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Acrylic; Resin
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Wood; Other; Stucco and Acrylic-Based Textured Finishes
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Metal Primer EC-3901 is a primer for 3M ™ Scotch-Weld ™ film and liquid adhesives in those applications where it is desired to obtain improved metal and glass adhesion. 3M ™ Scotch-Weld ™ Metal Primer EC-3901 improves resistance to environmental... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Silane Based
- Type: Coating; Primer; Adhesive Primer
- Substrate: Metallic
from Valspar Corporation (The)
Solid StainView stain colors. Total coverage gives maximum protection. VIEW PRODUCT DETAILS. Solid Color Acrylic Siding Stain. Solid Color Decking Stain. Semi-Solid StainView stain colors. Extra pigment adds longevity. VIEW PRODUCT DETAILS. Semi-Solid Siding and Fence. Semi-Solid Deck & Siding... [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Acrylic; Alkyd; Resin
- Type: Coating; Stain
- Substrate: Wood
from Rust-Oleum Corporation
Industrial performance, zero VOC, zero HAP, odorless, single component [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Acrylic; Polyurethane; Resin
- Type: Enamel; Base Coat; Paint
- Substrate: Metallic; Steel
from Dampney Company, Inc.
One component, fresh / salt water immersion coating from -40F to 140F (-40C to 60C) [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Substrate: Metallic; Steel
- Type: Coating
- Cure / Setting Technology: Film Drying
from Owens Corning® FOAMGLAS® Insulation
A low temperature anti-abrasive (LTAA) coating that reduces abrasion from vibrating piping or equipment by providing a durable bore coating to insulation substrates across a wide range of service temperatures. Product is idea for application to FOAMGLAS ® insulation blocks, curved segments... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Rubber
- Type: Coating
- Substrate: Other; Insulation
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®1000 HS is a high solids, heavy duty, two-component, catalyzed, polyamide epoxy coating formulated for demanding marine and industrial requirements. This dries rapidly to a tough, high gloss finish with excellent resistance to alkalies, abrasion, corrosion, and chemical attack. [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Epoxy; Resin; Polyamide
- Type: Coating
- Substrate: Concrete; Steel; Wood
from RDM Industrial Products, Inc.
This industry popular finish offers low VOC, high gloss, and static dissipative properties. High abrasion resistance. High gloss. Non flaking. Non slippery. Low cost. Low tribogeneration generation. UL listed. No formaldehyde or phthalates. Water based. Surface resistance (RTT): 107-109 Ohms @100... [See More]
- Dispensing Method: Brush / Roll-on
- Substrate: Ceramic; Plastic
- Type: Coating; Clear Coat
- Cure / Setting Technology: Film Drying
from Epoxies Etc...
Deco-Coat 2570 Epoxy Resin is an ultra clear, high gloss, durable coating. This liquid polymer epoxy resin is formulated without solvents and is therefore safe and easy to use. It is formulated in a convenient 1:1 by volume mix ration. [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Epoxy; Resin
- Type: Coating; Clear Coat
- Substrate: Wood
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Interior primers assure superior hiding, topcoat appearance and long-lasting results. Wood Stains, Sealers & Clear Topcoats. A wide variety of stains and sealers for... [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Acrylic; Alkyd; Resin
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
from Dryvit UK
Silicone facade paint. Dryvit ’s exterior coatings have been formulated to outperform traditional exterior paints. Based on high performance acrylic and silicone technologies these finishes are the ideal solution for refurbishment or new build. They are compatible with our texture finishes and... [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Resin; Silicone
- Type: Coating; Paint
- Substrate: Other; Mineral Substrates
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Structural Adhesive Primer EC-2174 is a primer for Scotch- Weld film adhesives. It is especially suggested for use with 3M ™ Scotch-Weld ™ Structural Adhesive Film AF 31. [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Resin; Formaldehyde Resins (Phenolic, Furan, Melamine)
- Type: Coating; Primer; Adhesive Primer
- Substrate: Aluminum; Metallic; Steel
from Valspar Corporation (The)
Since 1915, Guardsman has been a leader in caring for wood furniture. We started out making wood finishes for fine furniture, and created our wood care products to show off those finishes to their best advantage. Today, we offer a complete line of products designed to clean, protect and enhance the... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Substrate: Wood; Other; Fabric
- Type: Coating; Sealer
- Cure / Setting Technology: Film Drying
from Rust-Oleum Corporation
High heat resistance, two coat system for exterior heat exposure conditions [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Resin; Zinc; Metal Filled; Silicone
- Type: Coating; Base Coat; Paint
- Substrate: Metallic; Steel
from Dampney Company, Inc.
Elastoid 1300 is a single-package, high-build, elastomeric coating and vapor barrier. It is formulated from multiphase synthetic rubber copolymers which interact to provide an unusual range of desirable chemical and physical properties. It is tough, flexible, and corrosion-resistant and provides... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Rubber
- Type: Coating
- Substrate: Aluminum; Concrete; Metallic; Steel
from Owens Corning® FOAMGLAS® Insulation
PITTSTOP ™ 196 Vapor Stop is a two component, butyl rubber elastomer specially designed for use in FOAMGLAS ® insulation systems. Its service temperature range is specifically suited for Liquid Natural Gas and other cryogenic insulation systems. U.S. Stock Item. Available in standard two... [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Rubber
- Type: Coating
- Thickness: 0.0551 to 0.0630
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®1K Waterbased Urethane Floor Enamel is a gloss, high performance, one component polyester waterbased urethane, formulated specifically for industrial floor applications. Provides outstanding abrasion resistance, good chemical resistance, with excellent color and gloss retention. Fast... [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Polyurethane; Resin
- Type: Coating; Enamel
- Substrate: Concrete
from RDM Industrial Products, Inc.
This long lasting urethane enhanced static dissipative floor finish is the prime defense in ESD environments. With consistent resistance reading of 107-109 Ohms @100 volts, this water based finish is used worldwide to protect electronic devices from damage and to protect workers from explosion or... [See More]
- Dispensing Method: Brush / Roll-on
- Substrate: Ceramic; Plastic
- Type: Coating; Clear Coat
- Cure / Setting Technology: Film Drying
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Interior primers assure superior hiding, topcoat appearance and long-lasting results. Wood Stains, Sealers & Clear Topcoats. A wide variety of stains and sealers for... [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Acrylic; Alkyd; Resin
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
from Dryvit UK
Proprietary, silicone-based nanotechnology coating that promotes hydrophobicity enhancing reduced dirt pick up properties. Dryvit ’s exterior coatings have been formulated to outperform traditional exterior paints. Based on high performance acrylic and silicone technologies these finishes are... [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Resin; Silicone
- Type: Coating; Paint
- Cure / Setting Technology: Film Drying
from 3M Aerospace and Aircraft Maintenance Division
Use with AF-163-2 Bonding Films. Sprayable or Brushable, Curing Type. High Degree of Protection Against Corrosive Environments Both Inside and Outside the Bond Line. [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Epoxy; Resin
- Type: Coating; Primer; Adhesive Primer
- Substrate: Aluminum; Metallic
from Rust-Oleum Corporation
Modified silicone aluminum & colored finishes, high heat exposed surfaces [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Aluminum; Resin; Metal Filled; Silicone
- Type: Coating; Primer (optional feature); Clear Coat (optional feature); Paint
- Substrate: Metallic; Steel
from Dampney Company, Inc.
Wash Primer Metal Conditioner for galvanized or aluminum surfaces for high temperature surfaces and can be topcoated with the 200 or 230 series. Used for galvanized or aluminum surfaces and meets MIL-C-15328VB coating pre-treatment (formula 117 for metals). [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Resin; Vinyl; Metal Filled
- Type: Coating; Primer
- Substrate: Aluminum; Metallic; Steel
from Owens Corning® FOAMGLAS® Insulation
A liquid applied moisture cure vapor retarder coating especially formulated for use with FOAMGLAS ® insulation. PITTCOTE ® 300E coating can be used as a protective/vapor retarder coating over FOAMGLAS ® insulation under metal jacket or other UV resistant finish or as vapor retarder... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Substrate: Asphalt (optional feature); Metallic (optional feature)
- Type: Coating
- Cure / Setting Technology: Reactive or Moisture Cured
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®700 HS HIGH SOLIDS WATER BASED EPOXY FLOOR COATING is a 2 component, low VOC, epoxy floor finish/coating designed to provide an attractive, uniform appearance in industrial environments. Formulated for use in medium to heavy traffic conditions. Exceptional chemical resistance,... [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Epoxy; Resin
- Type: Coating
- Substrate: Concrete; Wood
from Sherwin-Williams
Paint. Highly durable, high quality coatings designed for superior performance on all exterior substrates. Our low-temp formulas let you expand your season. Primers. Get beautiful, long-lasting results for your exterior surfaces. Primers "anchor" finish coats, level uneven areas, seal porous... [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Acrylic; Alkyd; Resin
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
from Dryvit UK
Flexible, waterproof elastomeric exterior coating. Dryvit ’s exterior coatings have been formulated to outperform traditional exterior paints. Based on high performance acrylic and silicone technologies these finishes are the ideal solution for refurbishment or new build. They are compatible... [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Resin; Rubber
- Type: Coating; Paint
- Substrate: Concrete; Other; EIFS and Stucco Substrates
from Rust-Oleum Corporation
Two component, high solid polyamide converted epoxy, refined coal tar pitch [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Epoxy; Resin
- Type: Coating; Clear Coat
- Substrate: Concrete; Metallic; Steel
from Dampney Company, Inc.
Used on Galvanized Surfaces (galvanile) and Aluminum for high temperature service. [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Phosphoric Acid-Based
- Type: Coating; Metal Conditioner
- Substrate: Aluminum; Metallic; Steel
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®FLOOR-PLEX 7100 PRIMER is a heavy duty, VOC compliant, low odor, two component, catalyzed, water borne, polyamide epoxy floor primer. Provides overall performance comparable to that of most solvent borne epoxy floor systems. Designed for use under ArmorSeal ®finish coats. [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Epoxy; Resin; Polyamide
- Type: Coating; Primer
- Substrate: Concrete
from Sherwin-Williams
Paint. A critical step for any painting project is choosing the right paint. Thanks to today's improved coatings and applicators, even first-time painters can achieve professional-quality results. Primers. Get the beautiful, long-lasting results you expect. Primers "anchor" finish coats, level... [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Acrylic; Alkyd; Resin
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
from Rust-Oleum Corporation
Low VOC, water based acrylic finish, indoor/outdoor use, gloss retention [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
- Substrate: Aluminum; Concrete; Metallic; Steel
from Dampney Company, Inc.
A water-borne copolymer that is designed for application to rusted ferrous metal surfaces. When properly applied the coating converts the rusted surface to a dark, stable organic iron compound. This product has a low permeability factor and is impermeable to oxygen and moisture while providing a... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Resin; Copolymer
- Type: Coating; Rust Conversion
- Substrate: Metallic; Steel
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®FLOOR-PLEX 7100 is a heavy duty, interior, VOC compliant, low odor, two component, catalyzed, water borne, polyamide epoxy floor coating. This dries rapidly to an extra tough, gloss finish which will withstand heavy industrial traffic, abrasion, and general chemical attack. Provides... [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Epoxy; Resin; Polyamide
- Type: Coating; Clear Coat
- Substrate: Concrete
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Exterior primers assure superior hiding, topcoat appearance and long-lasting results. Commercial High-Performance Coatings. A comprehensive line-up of high-performance coatings... [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Acrylic; Alkyd; Resin
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
from Rust-Oleum Corporation
Two component, high solid epoxy coating, moderate to severe environment use [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Epoxy; Resin
- Type: Coating; Mastic
- Substrate: Concrete; Metallic; Steel
from Dampney Company, Inc.
Endcor 772 protects steel surfaces subjected to immersion in fresh or salt water, exposure in tidal or splash zones, or burial in soil. It is effective on the interiors of tanks and lines containing brine, crude oil, petroleum products, sewage or strong alkalies. It is resistant to a wide range of... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Epoxy; Resin
- Type: Coating; Clear Coat
- Substrate: Metallic; Steel
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®HS POLYURETHANE FLOOR ENAMEL is a heavy duty, two component, exterior/interior, low VOC, high solids, polyester-aliphatic urethane industrial floor coating. Provides a high gloss, excellent chemical resistance, color retention, and chalk resistance. Outstanding resistance a wide... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Polyurethane; Resin
- Type: Coating; Enamel
- Substrate: Concrete; Steel; Other; Iron
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Interior primers assure superior hiding, topcoat appearance and long-lasting results. Wood Stains, Sealers & Clear Topcoats. A wide variety of stains and sealers for... [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Acrylic; Alkyd; Resin
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
from Rust-Oleum Corporation
Two component, high solids, direct to metal, aliphatic acrylic polyurethane [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Polyurethane; Resin
- Type: Coating; Mastic
- Substrate: Aluminum; Concrete; Metallic; Steel
from Dampney Company, Inc.
Heat resistant coatings, color stable ambient to 500F (260C) [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Resin; Silicone
- Type: Coating; Clear Coat
- Substrate: Metallic; Steel; Other; Stainless Steel
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®REXTHANE I FLOOR COATING is a high solids, single component, aliphatic, moisture cure urethane, VOC complying, moisture resistant industrial floor coating. This urethane coating cures to a high gloss and chemical resistant film equivalent to two-part urethane coatings. Impact and... [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Polyurethane; Resin; Aliphatic
- Type: Coating; Clear Coat
- Substrate: Concrete; Steel; Wood; Other; Metalizing, Steel with Zinc
from Sherwin-Williams
Sherwin-Williams is a global provider of protective and marine coatings, offering a complete line of high performance coatings technologies to combat corrosion. We deliver unmatched service and coatings specification support to meet our customers ’ coatings needs. [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Epoxy; Fluoropolymers; Resin; Formaldehyde Resins (Phenolic, Furan, Melamine)
- Type: Coating
- Substrate: Metallic; Plastic; Wood
from Rust-Oleum Corporation
General purpose modified alkyd primer designed for interior or exterior use [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Alkyd; Resin
- Type: Enamel; Base Coat; Paint
- Substrate: Aluminum; Metallic; Steel
from Dampney Company, Inc.
Heat resistant coatings color stable to 500F [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Resin; Silicone
- Type: Coating; Clear Coat
- Substrate: Metallic; Steel; Other; Stainless Steel
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®TREAD-PLEX PRIMER is a general purpose, interior/exterior, VOC compliant, 100% acrylic, low odor, waterborne primer. One component. Water clean up. Fast dry. RECOMMENDED USAGE. For use over prepared concrete and wood floors, steps, stairwells, aisleways, or previously painted floor... [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Acrylic; Resin
- Type: Coating; Primer
- Substrate: Concrete; Wood
from Rust-Oleum Corporation
Two component, polyester polyurethane, high gloss, two available activators [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Polyurethane; Resin
- Type: Coating; Clear Coat; Paint
- Substrate: Metallic; Steel
from Dampney Company, Inc.
Zinc silicone primer, heat resistant ambient to 500F (260C) [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Resin; Zinc; Silicone
- Type: Coating; Primer
- Substrate: Metallic; Steel
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®TREAD-PLEX is a general purpose, interior/ exterior, VOC compliant, 100% acrylic, low odor, waterborne floor coating. This dries rapidly to a tough, alkali resistant finish which will withstand hard wear, abrasion, grease, oils, and cleaning equipment. One component. Water clean up. [See More]
- Dispensing Method: Brush / Roll-on
- Chemistry: Acrylic; Resin
- Type: Coating; Clear Coat
- Substrate: Concrete; Wood
from Rust-Oleum Corporation
Two component, aliphatic acrylic polyurethane finish, high gloss enamel [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Acrylic; Polyurethane; Resin
- Type: Enamel; Clear Coat; Paint
- Substrate: Aluminum; Metallic; Steel
from Dampney Company, Inc.
Zinc silicone primer heat resistant to 500F [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Resin; Zinc; Silicone
- Type: Coating; Primer
- Substrate: Metallic; Steel
from Sherwin-Williams Protective & Marine Coatings
2K WATERBASED URETHANE ANTI-GRAFFITI COATING is a two component, low VOC, super-hydrophobic polyurethane. It provides excellent graffiti resistance, color and gloss retention. Low odor, Low VOC. Excellent anti-graffi ti resistance. Apply over multiple coating types. Brush, roll or spray. Waterbased... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Polyurethane; Resin
- Type: Coating
- Cure / Setting Technology: Film Drying; Multicomponent
from Rust-Oleum Corporation
Two component, polyamine converted epoxy, for potable water tanks [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Epoxy; Resin
- Type: Coating; Base Coat; Paint
- Substrate: Concrete; Metallic; Steel
from Dampney Company, Inc.
VOC compliant, high build coating from 300F to 1000F (148C to 538C) [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Resin; Silicone
- Type: Coating
- Substrate: Metallic; Steel; Other; Stainless Steel
from Sherwin-Williams Protective & Marine Coatings
General Polymers AIRCRAFT HANGAR / INDUSTRIAL PLANT COATING is designed to provide a thin-mil, light reflective, and chemical resistant finish. Advantages. Excellent gloss retention. UV color stability. Chemical and stain resistant. Resists common acids, fuels grease, salt and Skydrol. Uses. [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Substrate: Concrete; Wood; Other; Quarry Tile
- Type: Coating
- Cure / Setting Technology: Film Drying; Multicomponent
from Rust-Oleum Corporation
Low VOC, fast dry, direct-to-metal, water based acrylic high gloss enamel [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
- Substrate: Aluminum; Concrete; Metallic; Steel
from Dampney Company, Inc.
Heat resistant coatings stable to 1000F [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Resin; Silicone
- Type: Coating; Clear Coat
- Substrate: Metallic; Steel; Other; Stainless Steel
from Sherwin-Williams Protective & Marine Coatings
General Polymers AquArmor “C ” Coating Systems is a 2-3 coat flooring system using a revolutionary new water-based resin technology, AquArmor WBE. It is installed quickly, environmentally friendly and is resistant to problems associated with moisture from the concrete. Advantages. No... [See More]
- Dispensing Method: Brush / Roll-on
- Substrate: Concrete; Wood; Other; Quarry Tile
- Type: Coating
- Cure / Setting Technology: Film Drying; Multicomponent
from Rust-Oleum Corporation
Low odor, two component, polyamine cured water based epoxy coating [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Epoxy; Resin
- Type: Coating; Paint
- Substrate: Aluminum; Concrete; Metallic; Steel
from Dampney Company, Inc.
Heat resistant coatings, color stable ambient to 1000F (538C). [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Resin; Silicone
- Type: Coating; Clear Coat
- Substrate: Metallic; Steel; Other; Stainless Steel
from Sherwin-Williams Protective & Marine Coatings
General Polymers AquArmor Ceramic Carpet Decorative Flooring Systems combines the historical advantages of epoxy quartz flooring with integral protection against loss of bond due to moisture vapor issues for slabs on grade. Advantages. Withstands vapor emissons. Aesthetically pleasing appearance. [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Epoxy; Resin
- Type: Coating
- Substrate: Concrete; Wood; Other; Quarry Tile
from Rust-Oleum Corporation
Single component, rust preventative, self-priming, lead & chromate free [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Acrylic; Resin
- Type: Coating; Base Coat
- Substrate: Concrete; Metallic; Steel
from Dampney Company, Inc.
Heat resistant coatings from 1100F to 1400F (593C to 760C) [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Inorganic (Silicate, Cement, Glaze); Ceramic; Resin; Silicone
- Type: Coating
- Substrate: Metallic; Steel; Other; Stainless Steel
from Sherwin-Williams Protective & Marine Coatings
General Polymers AquArmor MCS High Build Hangar Flooring System is designed to provide an 1/8" thick. high gloss, easy to maintain floor finish in a hangar or industrial environment. The unique AquArmor technology offers a fast, environmentally friendly installation that is not susceptible to... [See More]
- Dispensing Method: Brush / Roll-on
- Substrate: Concrete; Wood; Other; Quarry Tile
- Type: Coating
- Cure / Setting Technology: Film Drying; Multicomponent
from Rust-Oleum Corporation
Single component, water based acrylic, adhesion promoting primer [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Acrylic; Resin
- Type: Coating; Primer
- Substrate: Aluminum; Concrete; Metallic; Plastic; Steel
from Dampney Company, Inc.
Heat resistant coatings from 1100F to 1600F (593C to 871C) [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Inorganic (Silicate, Cement, Glaze); Ceramic; Resin; Silicone
- Type: Coating
- Substrate: Metallic; Steel; Other; Stainless Steel
from Sherwin-Williams Protective & Marine Coatings
General Polymers AquArmor MOISTURE CONTROL SYSTEM is a low odor, self-leveling system to be applied to concrete to control moisture vapor emissions. AquArmor MOISTURE CONTROL SYSTEM can be applied with a v-notched trowel/squeegee. It is designed to provide a refinished surface on concrete prior to... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Substrate: Concrete; Wood; Other; Quarry Tile
- Type: Coating
- Cure / Setting Technology: Film Drying; Multicomponent
from Rust-Oleum Corporation
Fast drying, low VOC, water-based acrylic copolymer, indoor/outdoor use [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
- Substrate: Aluminum; Concrete; Metallic; Steel
from Dampney Company, Inc.
Thurmalox 245 Primer is a high temperature, corrosion resistant primer formulated from silicone resins and zinc dust. Thurmalox 245 Primer provides outstanding corrosion protection for metal surfaces operating at temperatures from 500 °F (260 °C) to 1000 °F (538 °C), with peaks... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Chemistry: Resin; Zinc; Metal Filled; Silicone
- Type: Coating; Primer
- Substrate: Metallic; Steel
from Sherwin-Williams Protective & Marine Coatings
General Polymers AquArmor S Slurry System represents a family of flooring systems all built using a single revolutionary new water-based resin technology, AquArmor WBE. System designs include a coating and a 1/16 ” to 1/8 ” slurry. All systems are installed quickly, environmentally... [See More]
- Dispensing Method: Brush / Roll-on; Sprayable
- Substrate: Concrete; Wood; Other; Quarry Tile
- Type: Coating
- Cure / Setting Technology: Film Drying; Multicomponent