OEM / Industrial Industrial Coatings
from Master Bond, Inc.
Master Bond UV11-3 is an extra-hard, super-abrasion resist-radiation curable coating system for plastic substrates. It is a low viscosity, clear, 100% reactive liquid that can be cured readily by exposure to UV lamps or EB radiation. The cure can be effected in air or under an inert atmosphere such... [See More]
- Industry: Automotive; Electronics; Marine; Mil-Spec; OEM / Industrial
- Chemistry: Resin
- Type: Coating
- Substrate: Ceramic; Glass; Metallic; Plastic; Wood; Other
from Victrex PLC
VICOTE 701-707 grades are specially developed powder coatings. They are available in various average particle sizes from 10 - 50 microns. The powders are off-white in color and are available in various melt viscosities depending on the film thickness and level of melt flow required. Typical film... [See More]
- Industry: Automotive; Electronics; Food / Beverage; Medical; Mil-Spec (optional feature); OEM / Industrial
- Chemistry: Resin; PEEK
- Type: Coating; Powder Coating
- Substrate: Aluminum; Metallic; Steel
from Everlube Products
Ever-Slik 1201 is a thermally cured, specially blended epoxy based coating which provides outstanding corrosion resistance in almost any environment. Along with its excellent corrosion resistance, Ever-Slik 1201 is ideal for applications where an abrasion resistant coating is needed. Ever-Slik 1201... [See More]
- Industry: Marine; OEM / Industrial
- Chemistry: Epoxy; Resin
- Type: Coating
- Substrate: Metallic; Steel
from FORREST Technical Coatings
An industrial-grade, two-component acrylic polyurethane designed to provide added chemical and resistance with a satin gloss and textured appearance. Catalyst available for either interior or exterior use. [See More]
- Industry: Machine Tools; Marine; OEM / Industrial; Process Equipment
- Chemistry: Alkyd; Polyurethane; Resin
- Type: Coating; Clear Coat; Paint
- Substrate: Aluminum; Ceramic; Metallic; Plastic; Steel; Other; Fiberglass
from Mid-Mountain Materials, Inc.
Thermoseal ® Thermal Coatings are high-temperature coatings excellent for use as protection against flame erosion, molten metal corrosion, and thermal spalling. Our coatings are easily applied by rolling, dipping, or spraying. [See More]
- Industry: OEM / Industrial
- Substrate: Ceramic
- Type: Coating
- Cure / Setting Technology: Film Drying
from AGC Chemicals Americas, Inc.
Melt processable copolymers composed of tetrafluoroethylene and ethylene, Fluon ® ETFE Resins offer superior physical toughness and adaptability to meet the ranging needs of simple, high-quality, complicated and even high-performance products. The fluoropolymers maintain stable mechanical and... [See More]
- Industry: Food / Beverage; Machine Tools; OEM / Industrial; Process Equipment
- Chemistry: Fluoropolymers; Resin
- Type: Coating; Powder Coating
- Cure / Setting Technology: Thermoplastic
from Master Bond, Inc.
Master Bond Polymer System EP21AR is a two component epoxy resin compound for durable, high performance, coating liner and adhesive/sealants with outstanding acid as well as excellent overall chemical resistance. The EP21AR compound which is formulated to cure at room temperature or more rapidly at... [See More]
- Industry: Automotive; Electronics; Marine; OEM / Industrial
- Chemistry: Epoxy; Resin
- Type: Coating
- Substrate: Ceramic; Concrete; Glass; Metallic; Plastic; Wood
from FORREST Technical Coatings
A corrosion-resistant polyamide epoxy primer for use under high performance fast-dry topcoats. [See More]
- Industry: Machine Tools; Marine; OEM / Industrial; Process Equipment
- Chemistry: Epoxy; Resin
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Steel
from AGC Chemicals Americas, Inc.
Fluon ® PTFE Micro powders are PTFE lubricants milled to a very fine powder while retaining excellent lubricity properties. These powders can be compounded in rubber and plastics or dispersed in liquids to improve friction and wear properties of the base material. Many grades are used in... [See More]
- Industry: Electronics; OEM / Industrial
- Chemistry: Fluoropolymers
- Type: Coating; Powder Coating
- Form: Powder
from Master Bond, Inc.
Master Bond UV15 is a new one component, high strength, low viscosity, UV curable epoxy resin based polymer system for bonding, sealing, & coating with exceptionally high performance properties. It is a 100% reactive and does not contain any solvents or other volatiles. When exposed to a source... [See More]
- Industry: Automotive; Electronics; Marine; Mil-Spec; OEM / Industrial
- Chemistry: Epoxy; Resin
- Type: Coating
- Substrate: Ceramic; Glass; Metallic; Plastic; Wood; Other
from FORREST Technical Coatings
An electrostatic developed specifically to minimize the electrostatic discharge (ESD) created when two surfaces with different voltages meet one another. When properly applied these coatings can prevent significant damage caused by electrostatic discharge. [See More]
- Industry: Electronics; Machine Tools; Medical; OEM / Industrial; Process Equipment
- Substrate: Metallic; Plastic; Steel
- Type: Coating; Powder Coating; Paint
- Cure / Setting Technology: Thermoset
from AGC Chemicals Americas, Inc.
Fluon® PFA (perfluoro alkoxy) is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. Fluon® PFA has chemical, electrical, and thermal properties almost identical to its close chemical cousin, polytetrafluoroethylene (PTFE), yet can be processed by conventional... [See More]
- Industry: Electronics; OEM / Industrial; Process Equipment
- Chemistry: Fluoropolymers; Resin
- Type: Coating; Powder Coating
- Operating Temperature: -328 to 500
from Master Bond, Inc.
Key Features. Outstanding physical properties. Superb chemical resistance. Bonds well to many types of plastics. Withstands thermal cycling. Product Description. Master Bond UV18S is a specialty UV curable system for bonding, featuring good strength, toughness, and chemical resistance. It cures... [See More]
- Industry: Automotive; Electronics; OEM / Industrial
- Substrate: Ceramic; Glass; Metallic; Plastic
- Type: Coating; Sealer; Bonding, Sealing
- Cure / Setting Technology: Ultraviolet Light Curing
from FORREST Technical Coatings
Standard polyester TGIC powders are excellent coatings that protect the end product while also providing many decorative colors and special effects looks at the same time. These products can be used for interior or exterior applications. Variety of gloss levels and textures available. [See More]
- Industry: Machine Tools; OEM / Industrial; Process Equipment
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
- Type: Coating; Powder Coating; Paint
- Cure / Setting Technology: Thermoset
from AGC Chemicals Americas, Inc.
LUMIFLON ® is the first solvent-soluble fluoropolymer resin for coatings that can be cured at room temperature or at elevated temperatures. LUMIFLON resins, used in topcoats, are ultra-weatherable, and maintain their excellent appearance on buildings, bridges, and other structures, as well as on... [See More]
- Industry: Automotive; Marine; OEM / Industrial; Railway
- Chemistry: Fluoropolymers; Resin
- Type: Coating; Powder Coating
- Substrate: Aluminum
from Master Bond, Inc.
Master Bond UV16 is a new one component, high strength, low viscosity, UV curable epoxy resin based polymer system for bonding, sealing, & coating with exceptionally high performance properties. It is a 100% reactive and does not contain any solvents or other volatiles. When exposed to a source... [See More]
- Industry: Automotive; Electronics; Marine; Mil-Spec; OEM / Industrial
- Chemistry: Epoxy; Resin
- Type: Coating
- Substrate: Ceramic; Glass; Metallic; Plastic; Wood; Other
from FORREST Technical Coatings
Polyurethane coatings are formulated to have excellent flow characteristics while providing good mechanical and chemical resistance. These products also offer exterior durability. [See More]
- Industry: Machine Tools; OEM / Industrial; Process Equipment
- Chemistry: Polyurethane; Resin; Polyester
- Type: Coating; Powder Coating; Paint
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
from AGC Chemicals Americas, Inc.
Polyether polyols are key components used in the production of polyurethanes. AGC produces three grades: low monol polyether polyol, polyurethane foam and copolymer of polyether polyester. These polyols address major polyurethane applications for flexible and rigid polyurethane foams, coatings,... [See More]
- Industry: Automotive; OEM / Industrial
- Chemistry: Polyurethane; Resin
- Type: Coating; Sealer
- Form: Liquid
from Master Bond, Inc.
Master Bond Polymer System EP15 is a one component heat curing epoxy featuring high tensile strength that is utilized in testing the adhesion or cohesive strength of flame-sprayed coatings. This standard test is fully detailed in ASTM specification C 633. EP15 is formulated to cure at temperatures... [See More]
- Industry: OEM / Industrial
- Chemistry: Epoxy; Resin
- Type: Coating
- Substrate: Ceramic; Glass; Metallic; Other; Flame Spray Test Samples
from FORREST Technical Coatings
A fast-drying universal phenolic modified alkyd primer with non-lifting properties. Rust-inhibitive pigments provide excellent corrosion prevention and good weathering characteristics for protection during storage, transit or construction. Appropriate for use on interior or exterior steel substrates... [See More]
- Industry: Machine Tools; OEM / Industrial; Process Equipment
- Chemistry: Alkyd; Resin; Formaldehyde Resins (Phenolic, Furan, Melamine)
- Type: Coating; Primer; Base Coat; Paint
- Substrate: Metallic; Steel
from Master Bond, Inc.
Master Bond Polymer System EP38 is a fast curing, low viscosity, optically clear two component epoxy system for high performance coating, bonding and sealing. It is 100% reactive and does not contain any volatiles. The mix ratio is a convenient 3 to 1 by weight. EP38 is very fast curing. Coatings as... [See More]
- Industry: Marine; OEM / Industrial
- Chemistry: Epoxy; Resin
- Type: Coating
- Substrate: Concrete; Metallic; Plastic; Wood
from FORREST Technical Coatings
FORREST two-part epoxy coatings provide excellent solvent and corrosion resistance for industrial applications. Ideal for areas where a higher level of performance is required for chemical or solvent exposure. [See More]
- Industry: Machine Tools; OEM / Industrial; Process Equipment
- Chemistry: Epoxy; Resin
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Steel
from Master Bond, Inc.
Master Bond Polymer System EP30-1 is a low viscosity, two component epoxy compound for high performance fiber optics bonding, coating, potting and encapsulation formulated to cure at room temperature or more rapidly at elevated temperatures, with a four (4) to one (1) mix ratio by weight. This... [See More]
- Industry: Automotive; Electronics; Machine Tools; Marine; OEM / Industrial
- Chemistry: Epoxy; Resin
- Type: Coating
- Substrate: Ceramic; Concrete; Glass; Metallic; Plastic; Wood
from FORREST Technical Coatings
Originally engineered for high temperature resistance, INFERNEX ® L-1200 has proven itself a reliable coating for more than 30 years due to its unique blend of pigments in a silicone polymer resin. Designed for rapid curing and good film integrity, this product also provides good corrosion... [See More]
- Industry: Automotive; OEM / Industrial
- Substrate: Metallic; Steel
- Type: Coating; Paint
- Cure / Setting Technology: Film Drying
from Master Bond, Inc.
Master Bond Polymer System UV15-7SP4 is a new one component, optically clear, toughened UV and/or curable polymer system with extended service capability of -80 °F to +250 °F. It is 100% reactive, does not contain any solvents or other volatiles and does not embrittle even upon exposure to... [See More]
- Industry: Automotive; Electronics; Marine; Mil-Spec; OEM / Industrial
- Chemistry: Resin; Rubber
- Type: Coating
- Substrate: Ceramic; Glass; Metallic; Plastic; Wood; Other
from FORREST Technical Coatings
Originally developed for exhausts, PS-1000 has earned its reputation for decades as the workhorse for protecting exhaust systems, engines, and silencers. It ’s recognized by its black smooth finish and ability to withstand temperatures up to 1000 ° F (538 ° C). It also features... [See More]
- Industry: Automotive; OEM / Industrial
- Substrate: Metallic; Steel
- Type: Coating; Powder Coating; Paint
- Cure / Setting Technology: Thermoset
from Master Bond, Inc.
Master Bond UV15LV is a new one component, high strength UV curable epoxy resin based polymer system for bonding, sealing, & coating with exceptionally high performance properties. It is a 100% reactive, medium viscosity liquid at ambient temperatures which does not contain any solvents or other... [See More]
- Industry: Automotive; Electronics; Marine; Mil-Spec; OEM / Industrial
- Chemistry: Epoxy; Resin
- Type: Coating
- Substrate: Ceramic; Glass; Metallic; Plastic; Wood; Other
from FORREST Technical Coatings
Stove Bright High Temperature Paint is a liquid coating sprayed on properly prepared metal substrate for a long-lasting finish that can withstand peak temperatures to 1200 °F (650 °C). Backed by decades of proven performance, these coatings are the industry standard for heat resistance in... [See More]
- Industry: OEM / Industrial
- Chemistry: Resin; Silicone
- Type: Coating; Paint
- Substrate: Aluminum; Concrete; Metallic; Steel; Other
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®1000 HS is a high solids, heavy duty, two-component, catalyzed, polyamide epoxy coating formulated for demanding marine and industrial requirements. This dries rapidly to a tough, high gloss finish with excellent resistance to alkalies, abrasion, corrosion, and chemical attack. [See More]
- Industry: Marine; OEM / Industrial
- Chemistry: Epoxy; Resin; Polyamide
- Type: Coating
- Substrate: Concrete; Steel; Wood
from Aremco Products, Inc.
Aremco offers an expansive range of ceramic-based materials used for the assembly of high temperature, high power electrical devices, and high temperature fixtures, molds and tooling. These materials, based on aluminum oxide, aluminum nitride, magnesium oxide, silicon dioxide, silicon carbide,... [See More]
- Industry: OEM / Industrial
- Chemistry: Resin; Metal Filled
- Type: Coating (optional feature); Sealer
- Substrate: Glass
from Nylok Corporation
Nycote ® thread masking prevents weld spatter, electro-deposited paints, primers or coatings from adhering to the threads. Nylok ’s patented Nycote ® coating process provides an affordable and efficient way of protecting fastener threads from weld spatter and electro-deposited paints,... [See More]
- Industry: Automotive; Electronics; Marine; OEM / Industrial; Process Equipment
- Substrate: Metallic
- Type: Coating
- Features: Protective
from Rust-Oleum Corporation
Acrylic aliphatic urethane, high gloss, two component, gloss retention [See More]
- Industry: OEM / Industrial
- Chemistry: Acrylic; Polyurethane; Resin
- Type: Coating; Enamel; Base Coat
- Substrate: Aluminum; Concrete; Metallic; Steel
from Owens Corning® FOAMGLAS® Insulation
A low temperature anti-abrasive (LTAA) coating that reduces abrasion from vibrating piping or equipment by providing a durable bore coating to insulation substrates across a wide range of service temperatures. Product is idea for application to FOAMGLAS ® insulation blocks, curved segments... [See More]
- Industry: OEM / Industrial
- Chemistry: Rubber
- Type: Coating
- Substrate: Other; Insulation
from Hubbard-Hall Inc.
DESCRIPTION. Mi-Phos ™ M-5 is a manganese phosphate for steel. FEATURES AND BENEFITS. Easy additions with liquid concentrate. Temperature 205 ° to 210 ° F (96 ° – 99 ° C). Military Spec: MIL DTL 16232G, AMS 2481. RoHS and REACH compliant. Excellent for paint adhesion. [See More]
- Industry: Automotive; Mil-Spec; OEM / Industrial
- Chemistry: Manganese Phosphate
- Type: Coating; Primer; Sealer
- Substrate: Metallic; Steel
from Henkel Corporation - Industrial
Latex coating for rusted metal to stop rust, protect and act as a primer for a finish coat. It is suitable for exterior use in mild environments. LOCTITE ® 754 Extend ® Rust Treatment is a fast drying, milky white liquid latex coating applied to rusted metal to stop rust, protect and act as... [See More]
- Industry: OEM / Industrial
- Substrate: Metallic
- Type: Coating
- Form: Aerosol; Liquid; Transfer Tape
from Minerallac Company
TOUGH COAT ACRYLIC ENAMEL TYPE. ELECTRICAL EQUIPMENT, METAL, MOTORS, MACHINERY TOOLS, RAILING APPLICATION. CAN CONTAINER TYPE. 12 OZ CONTAINER CAPACITY. OSHA GREEN COLOR/SHADE. 15 MIN TOUCH DRY TIME. KRYLON[R], TOUGH COAT[R] BRAND. CONTAINER SIZE 16 OZ. PACKAGING QUANTITY 12 [See More]
- Industry: OEM / Industrial
- Chemistry: Acrylic
- Type: Enamel; Paint
- Form: Liquid
from Dampney Company, Inc.
One component, boiling water / steam immersion coating to 700F (371C) [See More]
- Industry: OEM / Industrial; Process Equipment
- Substrate: Metallic; Steel
- Type: Coating
- Cure / Setting Technology: Film Drying
from ACCRAbond, Inc.
Green anaerobic sealant primer. Certified to Mil-S-22473 Grade T Form R. Meets ASTM D5363 Primer T requirements. Replaces Loctite Locquic T7471. Federal National Stock Numbers: 8030-01-388-5604, 8030-00-082-2508, 8030-01-388-5605, 8030-00-900-2373,8030-00-181-8372, 8030-00-083-3442 [See More]
- Industry: Mil-Spec; OEM / Industrial
- Cure / Setting Technology: Film Drying
- Type: Coating; Primer
- Form: Aerosol (optional feature); Liquid
from ECOPTIK (CHANGCHUN) LTD
Anti-Reflection (AR) coating is one of widely used optical thin-film coatings that can be applied to the surfaces of optical elements to reduce reflection and to improve transmittance within some spectral region. BRD Optical provide AR coatings with appropriate materials and optimized configuration... [See More]
- Industry: Medical; Mil-Spec (optional feature); OEM / Industrial
- Substrate: Other; Fused Silica, BK7
- Type: Coating
from Acoustical Solutions, Inc.
Sound Damping Compound is a water based damping compound for the treatment of vibrating metal, wood, glass, ceramic and most plastic surfaces. This material imparts vibration damping and a shift in the dominant frequency. The resulting structure borne noise reduction provides a means of improving... [See More]
- Industry: Marine; OEM / Industrial
- Chemistry: Resin; Rubber
- Type: Coating; Sound Damping
- Substrate: Aluminum; Anodized; Ceramic; Glass; Metallic; Plastic; Steel; Wood
from Heresite Protective Coatings, LLC
This family of thin film, air dry phenolics is excellent for resistance to corrosive fume atmospheres and is particularly good in marine and salt air environments. VR-514 coatings exhibit superior durability, excellent adhesion and good flexibility. Typical applications include Swimming Pools, Waste... [See More]
- Industry: Food / Beverage; Marine; OEM / Industrial; Process Equipment; Railway
- Chemistry: Resin; Formaldehyde Resins (Phenolic, Furan, Melamine)
- Type: Coating
- Substrate: Aluminum; Metallic; Steel
from Sanchem, Inc.
is the electrical contact grease of choice in new electrical installations and maintenance because of its excellent performance in keeping metals free from corrosion. This rust preventitive has been used for over 50 years to preventing corrosion in electrical connectors from low micro-power... [See More]
- Industry: Mil-Spec; OEM / Industrial
- Substrate: Concrete; Metallic
- Type: Coating; Primer; Rust Preventive Coating
- Cure / Setting Technology: Film Drying
from Columbia Chemical Corporation
COLSID ® AP is a process for acid chloride zinc plating specially designed for mixed NH4Cl/KCl baths. COLSID AP contains a special ductilizer compound which insures extremely ductile, bright deposits. It produces little or no foam and can operate at high temperatures - over 125 °F/52 °C. [See More]
- Industry: Automotive; Electronics; Marine; Mil-Spec; OEM / Industrial
- Chemistry: Zinc; Acid Chloride Zinc Plating
- Type: Coating; Zinc Plating
- Substrate: Steel
from Wacker Chemical Corp.
ELASTOSIL ® E60 is a flowable one-component silicone rubber, which cures at room temperature under the influence of atmospheric moisture. Special features. acetic acid-curing system. flowable. excellent heat stability. excellent primerless adhesion to many substrates. Application. Coating for... [See More]
- Industry: Food / Beverage; OEM / Industrial
- Chemistry: Resin; Silicone
- Type: Coating; Sealer
- Cure / Setting Technology: Reactive or Moisture Cured
from PPG Protective & Marine Coatings
Water-based inorganic zinc silicate PCP [See More]
- Industry: Marine; OEM / Industrial
- Chemistry: Resin; Formaldehyde Resins (Phenolic, Furan, Melamine)
- Type: Coating; Primer
- Substrate: Metallic; Steel
from Whitford Corporation
Second generation, single component, VOC compliant, conventionally spray applied, coating. It requires a Xylan 4020 primer or a corona or flame pre-treatment. Note: VOC compliance applies to USA only. [See More]
- Industry: Automotive; OEM / Industrial
- Cure / Setting Technology: Film Drying
- Type: Coating
- Cure Temperature: 356
from Sheldahl Flexible Technologies - a Flex company
We have core strength in vacuum deposition via sputtering ad thermal evaporation. Our materials are used for numerous applications, including passive thermal control for satellites and launch vehicles, thermal insulation for F1 racing cars and fire suits, and robust materials for audio and medical... [See More]
- Industry: Automotive; Electronics; Marine; Medical; Mil-Spec; OEM / Industrial
- Features: Flame Retardant / UL 94V-0 Rated; Heat Resistant
- Type: Coating
from Epoxies Etc...
30-3019 is an unfilled, 100% solids, very low viscosity epoxy resin system. It can also be used as a potting/casting compound in small quantities; usually less than 30 grams of material. 30-3019 can be applied by brush, spray, or dip. [See More]
- Industry: Electronics; OEM / Industrial
- Chemistry: Epoxy; Resin
- Type: Coating
- Cure / Setting Technology: Multicomponent; Thermoset
from CHEMEON Surface Technology, LLC
CHEMEON TCP-HF and the soon to be released CHEMEON TCP-HF EPA (extended protection additive) are trivalent chromate and RoHS compliant chemical conversion coating products. Both CHEMEON TCP-HF and CHEMEON TCP-HF EPA meet mil-c-5541 spec and the hexavalent chromium EU ELV directive. CHEMEON TCP-HF... [See More]
- Industry: OEM / Industrial
- Chemistry: Inorganic (Silicate, Cement, Glaze); Conversion; -2146826273
- Type: Coating; Conversion Coating
- Substrate: Aluminum; Anodized; Metallic; Steel; Other; Zinc Alloys, IVD, Cadmium, Magnesium
from Redwood Plastics
Wearlon ® provides a non-stick coating that adds lubricity to nearly any surface to decrease build up and lower maintenance costs. Clean up is faster and easier. Super F-3M has tremendous water shedding properties and is spectacular in its hydrophobic properies, even approaching that which is... [See More]
- Industry: OEM / Industrial
- Cure / Setting Technology: Film Drying
- Type: Coating; Non-Stick
- Features: Waterproof; Non-stick
from Valspar Corporation (The)
Valspar powder coatings are delivered with the lowest applied-coating cost in the industry. They also generally emit zero or near-zero volatile organic compounds (VOCs), produce less hazardous waste than conventional liquid coatings and enable you to reclaim or recycle nearly 100-percent of... [See More]
- Industry: Automotive; OEM / Industrial
- Type: Coating; Powder Coating
from AkzoNobel N.V.
Coil coating is a continuous and highly automated process for coating metal before fabrication. In one continuous process, a coil of metal, up to 72 inches wide moving up to 700 feet per minute, is unwound and both the top and bottom sides are cleaned, chemically treated, primed, oven cured, top... [See More]
- Industry: OEM / Industrial
- Substrate: Metallic
- Type: Coating
from Houghton International, Inc.
Houghto-Coat ™ A-830 is a concentrated liquid chrome-phosphate used for aluminum pre-paint treatment. The product is used with the Houghto-Coat A-840 accelerator to prepare a chrome-phosphate bath that will produce an iridescent to olive green coating, which is an excellent base for paint. [See More]
- Industry: OEM / Industrial
- Chemistry: Inorganic (Silicate, Cement, Glaze); Conversion
- Type: Coating; Base Coat
- Substrate: Aluminum
from Sauereisen, Inc.
Arctikure No. 230 is a three-component epoxy monolithic floor system that is used to protect concrete and other substrates from chemical and physical abuse. No. 230 is designed for cold room applications and will cure at temperatures as low as 35oF. Arctikure has the durability to withstand the... [See More]
- Industry: OEM / Industrial; Process Equipment
- Chemistry: Epoxy; Resin
- Type: Coating; Base Coat
- Substrate: Concrete
from Protavic America, Inc.
Silver filled epoxy system for tantalum & ceramic termination coating. This product is commonly used for flexible termination of capacitors and offers high strength and flexibility. This product is the "gold" standard for flexible termination. Solvent adjusted. Please contact us for product... [See More]
- Industry: Electronics; OEM / Industrial
- Chemistry: Epoxy; Resin; Metal Filled; Silver
- Type: Coating; Varnish
- Substrate: Metallic
from Chase Products Co.
Champion Sprayon ® Stainless Steel Cleaner, Polish and Protectant is a unique oil-in-water emulsion that quickly cleans, shines and protects without scratching. Heavy-duty cleaning agents and surfactants deep-clean, and remove smudges, soil, oil and grease stains, water marks and rust without... [See More]
- Industry: Food / Beverage; Medical; OEM / Industrial
- Substrate: Metallic; Steel
- Type: Coating
- Form: Aerosol
from Sekisui Voltek, LLC
Our Volextra process is an extremely flexible extrusion coating capability. Using state of the art technology, solid plastic is permanently melt bonded to our Volara ® foams. Polyolefin based coatings can be engineered to match your design needs, in a range of thicknesses from 0.0015" to 0.055". [See More]
- Industry: Medical; OEM / Industrial
- Chemistry: Resin; Vinyl; Ethylene Vinyl Acetate Copolymer
- Type: Coating
- Cure / Setting Technology: Thermoplastic
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Fuel Resistant Coating EC-776SR is a general purpose, solvent-based adhesive/coating with good adhesion to synthetic rubber, metal, glass, and many plastics. 3M EC-776SR coating includes a red dye for identification purposes. [See More]
- Industry: OEM / Industrial
- Substrate: Glass; Metallic; Plastic; Other; Synthetic Rubber
- Type: Coating
- Cure / Setting Technology: Film Drying
from Sherwin-Williams
It takes more than a coating to create an exceptional finish, which is why Sherwin-Williams provides OEMs with complete finishing solutions. Across both markets and continents, we help our customers be more efficient, innovative, and highly valued with customized technology and service solutions... [See More]
- Industry: Electronics; Machine Tools; Mil-Spec; OEM / Industrial
- Chemistry: Resin
- Type: Coating; Powder Coating
- Substrate: Metallic; Plastic; Wood
from Pavco, Inc.
Black Zn-Ni - is a single dip chromate process consisting of two components, Pavchrome Black Zn-Ni A and Pavchrome Zn-Ni B. Black Zn-Ni is specially formulated to eliminate the break-in time required with traditional black chromate processes. Formulated for use over zinc plating, Black Zn-Ni is... [See More]
- Industry: Automotive; OEM / Industrial
- Chemistry: Conversion
- Type: Coating; Clear Coat
- Substrate: Other; Zinc Plating Surfaces
from Foctek Photonics, Inc.
The Coating on the optical element is very important, which can improve the transmission, high reflection, etc. Foctek offers all kinds of anti-reflective (AR coating), high reflective (HR Coating) and partial reflective (PR Coating) coating according to customer's requirement. Foctek produces a... [See More]
- Industry: OEM / Industrial
- Type: Coating; Optical Coating
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®1K Waterbased Urethane Floor Enamel is a gloss, high performance, one component polyester waterbased urethane, formulated specifically for industrial floor applications. Provides outstanding abrasion resistance, good chemical resistance, with excellent color and gloss retention. Fast... [See More]
- Industry: Medical; OEM / Industrial
- Chemistry: Polyurethane; Resin
- Type: Coating; Enamel
- Substrate: Concrete
from Rust-Oleum Corporation
Anti-slip one-step pedestrian grade, single component anti-slip coating [See More]
- Industry: OEM / Industrial
- Chemistry: Epoxy; Resin
- Type: Coating; Paint
- Substrate: Concrete
from Owens Corning® FOAMGLAS® Insulation
A specially formulated primer that promotes adhesion of the PITTWRAP ® SS Jacketing when the laps are slightly dusty or the application is below 10 °C (50 °F). U.S. Stock Item. Available in standard 1 gallon containers. [See More]
- Industry: OEM / Industrial
- Coverage: 75
- Type: Coating; Primer; Paint
- Operating Temperature: -27 to 180
from Henkel Corporation - Industrial
Synthetic rubber coating specially formulated to protect underbodies from corrosion. It dries to a firm, flexible, tack-free, rubberized film. LOCTITE ® SF 7607 is a dark brown to black, synthetic rubber coating specially formulated to protect underbodies from corrosion. It dries to a firm,... [See More]
- Industry: OEM / Industrial
- Substrate: Metallic
- Type: Coating
- Form: Aerosol; Liquid; Transfer Tape
from Minerallac Company
TOUGH COAT ACRYLIC ENAMEL TYPE. ELECTRICAL EQUIPMENT, METAL, MOTORS, MACHINERY TOOLS, RAILING APPLICATION. CAN CONTAINER TYPE. 12 OZ CONTAINER CAPACITY. OSHA BLACK COLOR/SHADE. 15 MIN TOUCH DRY TIME. KRYLON[R], TOUGH COAT[R] BRAND. CONTAINER SIZE 16 OZ. PACKAGING QUANTITY 12 [See More]
- Industry: OEM / Industrial
- Chemistry: Acrylic
- Type: Enamel; Paint
- Form: Liquid
from Dampney Company, Inc.
One component, fresh / salt water immersion coating from -40F to 140F (-40C to 60C) [See More]
- Industry: OEM / Industrial; Process Equipment
- Substrate: Metallic; Steel
- Type: Coating
- Cure / Setting Technology: Film Drying
from ECOPTIK (CHANGCHUN) LTD
Beam splitter divides or combines beams with desired transmittance and reflectance in a required wavelength region, or divides beam light into the P-polarization and S-polarization components. 1. 45°Beam Splitters Substrate: Fused silica, BK7 Surface Figure: 5J/cm2 (1.06µm,1ns)2. Polarizing Beam... [See More]
- Industry: Medical; Mil-Spec (optional feature); OEM / Industrial
- Substrate: Other; Fused Silica, BK7
- Type: Coating
from Heresite Protective Coatings, LLC
Our 50 years of coating history speaks for itself. In 1964, Heresite was the first company to apply coatings to aluminum-finned, copper-tubed heat exchangers. The Heresite coating became then, and still remains a standard in the industrial coatings industry. We provide the highest quality protective... [See More]
- Industry: Food / Beverage; Marine; OEM / Industrial; Process Equipment; Railway
- Chemistry: Resin; Formaldehyde Resins (Phenolic, Furan, Melamine)
- Type: Coating
- Substrate: Aluminum; Metallic; Steel
from Sanchem, Inc.
is a dry in place cleaner and conversion coating solution for use on iron, steel or zinc surfaces. When the surface reaction is complete the protected steel or iron becomes blue-black in color. This protective coating has excellent corrosion protection from the effects of hummidty and is an... [See More]
- Industry: OEM / Industrial
- Substrate: Metallic; Steel; Other; Zinc
- Type: Coating; Primer; Conversion Coating
- Cure / Setting Technology: Film Drying
from Columbia Chemical Corporation
EXTREME ® 110 is an economical process for plating brilliant, level, ductile zinc deposits in acid chloride zinc plating electrolytes using potassium chloride and boric acid (ammonia-free). EXTREME 110 additives promote superior bath solubility and higher temperature tolerance compared to... [See More]
- Industry: Automotive; Electronics; Marine; Mil-Spec; OEM / Industrial
- Chemistry: Zinc; Acid Chloride Zinc Plating
- Type: Coating; Zinc Plating
- Substrate: Steel
from PPG Protective & Marine Coatings
High Solids Epoxy Coating [See More]
- Industry: Marine; OEM / Industrial
- Chemistry: Epoxy; Resin
- Type: Coating; Clear Coat
- Substrate: Concrete; Metallic; Steel
from Whitford Corporation
Xylar coatings have in common an inorganic, ceramic-metallic bonding agent rather than the organic polymer resins used in Xylan coatings. The ceramic-metallic cornerstone creates coatings which are much harder than their organic counterparts and have the potential for much higher operating... [See More]
- Industry: OEM / Industrial
- Chemistry: Inorganic (Silicate, Cement, Glaze)
- Type: Coating; Primer; Clear Coat; Sealer
- Cure / Setting Technology: Film Drying
from Epoxies Etc...
Low viscosity ultraviolet curable coating. This is an electronic grade material which will provide chemical, moisture and vibration protection. [See More]
- Industry: Electronics; OEM / Industrial
- Chemistry: Resin
- Type: Coating; Clear Coat
- Cure / Setting Technology: Ultraviolet Light Curing
from CHEMEON Surface Technology, LLC
It can be used in conversion coating and anodizing seal applications and provides superior corrosion and paint adhesion characteristics. One of the unique characteristics, which separate it from other competing brands, is the fact that typical pre-treatment chemistries (deoxidizers and etchants) are... [See More]
- Industry: OEM / Industrial
- Chemistry: Inorganic (Silicate, Cement, Glaze)
- Type: Coating; Conversion Coating
- Substrate: Aluminum; Anodized; Metallic
from AkzoNobel N.V.
Our complete range of high performance linings products are proven to provide long term protection, reducing process downtime and providing essential protection against some of the world ™s aggressive industrial cargoes ™ across a wide range of temperatures. [See More]
- Industry: OEM / Industrial
- Features: Protective
- Type: Coating
from Chase Products Co.
These double-sided wipes are premoistened with a unique citrus-based formula designed to clean and polish stainless steel surfaces, while protecting them from the damaging effects of oxidation and corrosion. Each wipe is a dual-purpose engineered-cloth towel, with an abrasive (but non-scratching)... [See More]
- Industry: Food / Beverage; Medical; OEM / Industrial
- Substrate: Metallic; Steel
- Type: Coating
- Features: Corrosion Resistant; Protective
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Metal Primer EC-3901 is a primer for 3M ™ Scotch-Weld ™ film and liquid adhesives in those applications where it is desired to obtain improved metal and glass adhesion. 3M ™ Scotch-Weld ™ Metal Primer EC-3901 improves resistance to environmental... [See More]
- Industry: OEM / Industrial
- Chemistry: Silane Based
- Type: Coating; Primer; Adhesive Primer
- Substrate: Metallic
from Sherwin-Williams
Sherwin-Williams is a global provider of protective and marine coatings, offering a complete line of high performance coatings technologies to combat corrosion. We deliver unmatched service and coatings specification support to meet our customers ’ coatings needs. [See More]
- Industry: Food / Beverage; Marine; Medical; OEM / Industrial; Process Equipment; Railway
- Chemistry: Epoxy; Fluoropolymers; Resin; Formaldehyde Resins (Phenolic, Furan, Melamine)
- Type: Coating
- Substrate: Metallic; Plastic; Wood
from Pavco, Inc.
Pavchrome Black Onyx - is a single dip chromate process consisting of two components, Pavchrome Black ONYX A and Pavchrome Black ONYX B. Black ONYX is specially formulated to eliminated the break -in time required with traditional black chromate processes. Formulated for use over zinc plating, ONYX... [See More]
- Industry: Automotive; OEM / Industrial
- Chemistry: Conversion
- Type: Coating; Clear Coat
- Substrate: Other; Zinc Plating Surfaces
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®33 EPOXY PRIMER/SEALER is a low viscosity, 100% solids, high build, fast cure, epoxy primer designed for use under ArmorSeal ®650 or where a high build primer is needed. This primer/sealer enhances adhesion by penetrating into the concrete substrate and helps reduce bubbling and... [See More]
- Industry: Marine; OEM / Industrial
- Chemistry: Epoxy; Resin
- Type: Coating; Primer; Sealer
- Substrate: Concrete; Wood
from Rust-Oleum Corporation
Industrial performance, zero VOC, zero HAP, odorless, single component [See More]
- Industry: Food / Beverage; Medical; OEM / Industrial
- Chemistry: Acrylic; Polyurethane; Resin
- Type: Enamel; Base Coat; Paint
- Substrate: Metallic; Steel
from Owens Corning® FOAMGLAS® Insulation
PC ® 74 A1 is a pre-mixed mineral adhesive and basic plaster, class CS II according to DIN EN 998-1 for interior insulation. Hydraulic hardening and surfactant active. The PC ® 74 A1 is non-combustible (building material class A1 according to EN 13501). PC ® 74 A1 mixed with water, can... [See More]
- Industry: OEM / Industrial
- Chemistry: Mixed Mineral
- Type: Coating; Base Coat
- Cure / Setting Technology: Film Drying
from Henkel Corporation - Industrial
BONDERITE ® C-IC 457 Nonflammable, phosphate-free, surfactant-based cleaner, brightener and pre-paint conditioner for magnesium and aluminum. BONDERITE C-IC 457 should not be used on high copper bearing aluminum alloys or aluminum castings. Acid cleaners. [See More]
- Industry: OEM / Industrial
- Chemistry: Conversion
- Type: Coating
- Substrate: Metallic
from Minerallac Company
TOUGH COAT ACRYLIC ENAMEL TYPE. ELECTRICAL EQUIPMENT, METAL, MOTORS, MACHINERY TOOLS, RAILING APPLICATION. CAN CONTAINER TYPE. 12 OZ CONTAINER CAPACITY. OSHA WHITE COLOR/SHADE. 15 MIN TOUCH DRY TIME. KRYLON[R], TOUGH COAT[R] BRAND. CONTAINER SIZE 16 OZ. PACKAGING QUANTITY 12 [See More]
- Industry: OEM / Industrial
- Chemistry: Acrylic
- Type: Enamel; Paint
- Form: Liquid
from Dampney Company, Inc.
Wash Primer Metal Conditioner for galvanized or aluminum surfaces for high temperature surfaces and can be topcoated with the 200 or 230 series. Used for galvanized or aluminum surfaces and meets MIL-C-15328VB coating pre-treatment (formula 117 for metals). [See More]
- Industry: OEM / Industrial
- Chemistry: Resin; Vinyl; Metal Filled
- Type: Coating; Primer
- Substrate: Aluminum; Metallic; Steel
from ECOPTIK (CHANGCHUN) LTD
RD Optical provide metal coated Front Surface Mirrors. The front surface coated with metal (Au, Al, or Ag) over coated with silicon monoxide(SiO2). Metallic coatings have low peak reflectance, mechanical durability and damage threshold, but they have extremely broadband and low cost. They are... [See More]
- Industry: Medical; Mil-Spec (optional feature); OEM / Industrial
- Chemistry: Aluminum (optional feature); Metal Filled; Silver (optional feature)
- Type: Coating
from Columbia Chemical Corporation
COLZINC ® ACF-II is a process for alkaline cyanide-free zinc plating that produces brilliantly bright, and extremely ductile deposits. Its excellent low current density covering and throwing power make it especially suitable for steel parts with deep recesses such as fittings, tubes, or computer... [See More]
- Industry: Automotive; Electronics; Marine; Mil-Spec; OEM / Industrial
- Chemistry: Zinc; Alkaline Zinc Plating
- Type: Coating; Zinc Plating
- Substrate: Steel
from Whitford Corporation
Superior topcoat for reprographic fuser roller. [See More]
- Industry: Automotive; OEM / Industrial
- Substrate: Steel
- Type: Coating; Clear Coat
- Cure / Setting Technology: Film Drying
from Chase Products Co.
Cold Galvanizing 95 is a complete zinc metal spray which rustproofs any metal surface with thorough protection that lasts for years. It is equivalent to a hot galvanizing treatment as it fuses and adheres to all metal surfaces, stopping corrosion immediately. Zinc used in this product is 95% pure. [See More]
- Industry: Automotive; Machine Tools; Marine; OEM / Industrial
- Chemistry: Zinc; Metal Filled
- Type: Coating
- Substrate: Aluminum; Metallic; Steel
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Structural Adhesive Primer EC-1290 is a sprayable primer suggested for use with 3M ™ Scotch-Weld ™ Structural Adhesive Films AF-6, AF-10 and AF-13. Simplify production scheduling by protecting the cleaned surfaces until the bonding operations can be... [See More]
- Industry: OEM / Industrial
- Chemistry: Resin; Formaldehyde Resins (Phenolic, Furan, Melamine)
- Type: Coating; Primer; Adhesive Primer
- Substrate: Aluminum; Metallic
from Pavco, Inc.
Volta CC - is a single-dip chromate conversion process formulated to produce either a heavy yellow or a clear conversion coating over 70% tin and 30% zinc. [See More]
- Industry: Automotive; OEM / Industrial
- Chemistry: Conversion
- Type: Coating; Clear Coat
- Substrate: Other; Tin & Zinc
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®FLOOR-PLEX 7100 PRIMER is a heavy duty, VOC compliant, low odor, two component, catalyzed, water borne, polyamide epoxy floor primer. Provides overall performance comparable to that of most solvent borne epoxy floor systems. Designed for use under ArmorSeal ®finish coats. [See More]
- Industry: Food / Beverage; Marine; OEM / Industrial
- Chemistry: Epoxy; Resin; Polyamide
- Type: Coating; Primer
- Substrate: Concrete
from Rust-Oleum Corporation
Three component, epoxy resin polymer, brightly colored quartz aggregate [See More]
- Industry: Food / Beverage; Medical; OEM / Industrial
- Chemistry: Epoxy; Resin
- Type: Coating; Clear Coat
- Substrate: Concrete
from Owens Corning® FOAMGLAS® Insulation
PITTSTOP ™ 196 Vapor Stop is a two component, butyl rubber elastomer specially designed for use in FOAMGLAS ® insulation systems. Its service temperature range is specifically suited for Liquid Natural Gas and other cryogenic insulation systems. U.S. Stock Item. Available in standard two... [See More]
- Industry: OEM / Industrial
- Chemistry: Rubber
- Type: Coating
- Thickness: 0.0551 to 0.0630
from Henkel Corporation - Industrial
known as BONDERITE 1070) is formulated for spray and immersion application to steel, aluminum and zinc surfaces to clean and develop a conversion coating. BONDERITE ® M-FE 1070 IRON PHOSPHATE (Known as BONDERITE 1070) is formulated for spray and immersion application to steel, aluminum and... [See More]
- Industry: OEM / Industrial
- Chemistry: Conversion
- Type: Coating
- Substrate: Metallic
from Minerallac Company
TOUGH COAT ACRYLIC ENAMEL TYPE. ELECTRICAL EQUIPMENT, METAL, MOTORS, MACHINERY TOOLS, RAILING APPLICATION. CAN CONTAINER TYPE. 12 OZ CONTAINER CAPACITY. OSHA YELLOW COLOR/SHADE. 15 MIN TOUCH DRY TIME. KRYLON[R], TOUGH COAT[R] BRAND. CONTAINER SIZE 16 OZ. PACKAGING QUANTITY 12 [See More]
- Industry: OEM / Industrial
- Chemistry: Acrylic
- Type: Enamel; Paint
- Form: Liquid
from Dampney Company, Inc.
Used on Galvanized Surfaces (galvanile) and Aluminum for high temperature service. [See More]
- Industry: OEM / Industrial
- Chemistry: Phosphoric Acid-Based
- Type: Coating; Metal Conditioner
- Substrate: Aluminum; Metallic; Steel
from ECOPTIK (CHANGCHUN) LTD
Partial Reflection (PR) coatings provide attenuation functions and are generally applied to output mirrors of laser cavity. Our company can design the PR coating with reflectance from 10% to 99.7% to achieve the desired performance. Wideband PR coatings are typically used at 45 degrees angle to the... [See More]
- Industry: Medical; Mil-Spec (optional feature); OEM / Industrial
- Substrate: Other; Fused Silica, BK7
- Type: Coating
from Columbia Chemical Corporation
EXCEL ® 800 is cutting edge technology for producing acid chloride-like zinc deposit brightness from an alkaline cyanide-free zinc plating solution. Deposits are extremely ductile even at thickness over 25 microns (1 mil). EXCEL 800 is deal for both rack and barrel plating lines, and performs... [See More]
- Industry: Automotive; Electronics; Marine; Mil-Spec; OEM / Industrial
- Chemistry: Zinc; Alkaline Zinc Plating
- Type: Coating; Zinc Plating
- Substrate: Steel
from Whitford Corporation
High temperature resistant; low coefficient of friction; abrasion/wear resistant; easy clean; dry film lubricant; thermoset; wide use temperature; anti-galling. [See More]
- Industry: Automotive; OEM / Industrial
- Substrate: Ceramic; Metallic; Plastic; Wood
- Type: Coating
- Cure / Setting Technology: Film Drying
from Chase Products Co.
CS+ Lubricant is a 4-way lube that stops annoying squeaks, guards against rust and corrosion, releases rusted or frozen metal parts with instant penetration, and removes moisture. It will displace water and moisture-proof all types of electrical equipment, relay switches, wet engines, distributors,... [See More]
- Industry: Automotive; Machine Tools; OEM / Industrial
- Substrate: Aluminum; Metallic; Steel
- Type: Coating
- Cure / Setting Technology: Multicomponent
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Structural Adhesive Primer EC-1945 B/A is a two-part chemically curing, corrosion resistant primer. Scotch-Weld EC-1945 B/A primer improves adhesion of sealers, epoxies, and urethanes to most metals as well as offering increased corrosion protection. [See More]
- Industry: OEM / Industrial
- Chemistry: Epoxy; Resin
- Type: Coating; Primer; Adhesive Primer
- Substrate: Aluminum; Metallic
from Pavco, Inc.
LaClear 2H - is a final dip process which provides a clear lacquer film over commonly plated metal surfaces. It is especially recommended for use over yellow chromated household furnishings to provide a beautiful brass appearance with no iridescence. [See More]
- Industry: Automotive; OEM / Industrial
- Substrate: Metallic
- Type: Lacquer
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®FLOOR-PLEX 7100 is a heavy duty, interior, VOC compliant, low odor, two component, catalyzed, water borne, polyamide epoxy floor coating. This dries rapidly to an extra tough, gloss finish which will withstand heavy industrial traffic, abrasion, and general chemical attack. Provides... [See More]
- Industry: OEM / Industrial
- Chemistry: Epoxy; Resin; Polyamide
- Type: Coating; Clear Coat
- Substrate: Concrete
from Rust-Oleum Corporation
Heavy duty static control floor topping, 3 component epoxy resin polymer [See More]
- Industry: Medical; OEM / Industrial
- Chemistry: Epoxy; Resin
- Type: Coating; Clear Coat; Sealer
- Substrate: Concrete
from Henkel Corporation - Industrial
BONDERITE M-PT 99X [See More]
- Industry: OEM / Industrial
- Chemistry: Conversion
- Type: Coating
- Substrate: Metallic
from Minerallac Company
TOUGH COAT ACRYLIC ENAMEL TYPE. ELECTRICAL EQUIPMENT, METAL, MOTORS, MACHINERY TOOLS, RAILING APPLICATION. CAN CONTAINER TYPE. 12 OZ CONTAINER CAPACITY. SEMI-FLAT BLACK COLOR/SHADE. 15 MIN TOUCH DRY TIME. KRYLON[R], TOUGH COAT[R] BRAND. CONTAINER SIZE 16 OZ. PACKAGING QUANTITY 12 [See More]
- Industry: OEM / Industrial
- Chemistry: Acrylic
- Type: Enamel; Paint
- Form: Liquid
from Dampney Company, Inc.
A water-borne copolymer that is designed for application to rusted ferrous metal surfaces. When properly applied the coating converts the rusted surface to a dark, stable organic iron compound. This product has a low permeability factor and is impermeable to oxygen and moisture while providing a... [See More]
- Industry: Marine; OEM / Industrial
- Chemistry: Resin; Copolymer
- Type: Coating; Rust Conversion
- Substrate: Metallic; Steel
from Columbia Chemical Corporation
COLCAD ® 100 is a brightener for cyanide cadmium plating for producing brilliant, ductile metal deposits over a wide current density range, and is suitable for both rack and barrel plating. COLCAD 100 is now the only Boeing approved cadmium brightener available for these applications. Under the... [See More]
- Industry: Automotive; Electronics; Marine; Mil-Spec; OEM / Industrial
- Chemistry: Zinc; Cyanide Cadmium Zinc Plating
- Type: Coating; Cadmium Plating
- Substrate: Steel
from Chase Products Co.
Galv-Off ® removes the buildup of galvanization, softening it so that it flakes off by itself. Even stubborn deposits can be removed with frequent application. When used daily, it not only prevents harmful deposits from accumulating, but it also lubricates and protects rollers and dies. The... [See More]
- Industry: OEM / Industrial
- Form: Aerosol
- Type: Coating
- Dispensing Method: Sprayable
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Structural Adhesive Primer EC-3960 is a sprayable corrosion inhibiting adhesive primer. It provides a high degree of protection against corrosive environments both inside and outside the adhesive bondline. It is suggested for use with 3M ™ Scotch-Weld ™... [See More]
- Industry: OEM / Industrial
- Chemistry: Epoxy; Resin
- Type: Coating; Primer; Adhesive Primer
- Substrate: Aluminum; Metallic
from Pavco, Inc.
HyProBlue - A high performance, trivalent passivate that can provide over 100 hours of corrosion resistance to white salts per ASTM B 117 to electroplated zinc. A Teflon immersion heater is recommended. [See More]
- Industry: Automotive; OEM / Industrial
- Substrate: Other; Trivalent Passivate
- Type: Coating; Clear Coat
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®HS POLYURETHANE FLOOR ENAMEL is a heavy duty, two component, exterior/interior, low VOC, high solids, polyester-aliphatic urethane industrial floor coating. Provides a high gloss, excellent chemical resistance, color retention, and chalk resistance. Outstanding resistance a wide... [See More]
- Industry: Automotive; Marine; OEM / Industrial
- Chemistry: Polyurethane; Resin
- Type: Coating; Enamel
- Substrate: Concrete; Steel; Other; Iron
from Rust-Oleum Corporation
Two component, water based epoxy coating, low risk of flammability [See More]
- Industry: OEM / Industrial
- Chemistry: Epoxy; Resin
- Type: Coating
- Substrate: Concrete
from Henkel Corporation - Industrial
Alkoxy silicone conformal coating designed to provide environmental protection for printed circuit boards and other sensitive electronic components. LOCTITE ® SI 5293 is an amber to yellow, transparent, fluorescent, UV-cure alkoxy silicone liquid conformal coating designed to provide... [See More]
- Industry: OEM / Industrial
- Substrate: Metallic
- Type: Coating
- Operating Temperature: 104 to 392
from Minerallac Company
TOUGH COAT ACRYLIC ENAMEL TYPE. ELECTRICAL EQUIPMENT, METAL, MOTORS, MACHINERY TOOLS, RAILING APPLICATION. CAN CONTAINER TYPE. 12 OZ CONTAINER CAPACITY. MAX FLAT BLACK COLOR/SHADE. 15 MIN TOUCH DRY TIME. KRYLON[R], TOUGH COAT[R] BRAND. CONTAINER SIZE 16 OZ. PACKAGING QUANTITY 12 [See More]
- Industry: OEM / Industrial
- Chemistry: Acrylic
- Type: Enamel; Paint
- Form: Liquid
from Dampney Company, Inc.
Endcor 772 protects steel surfaces subjected to immersion in fresh or salt water, exposure in tidal or splash zones, or burial in soil. It is effective on the interiors of tanks and lines containing brine, crude oil, petroleum products, sewage or strong alkalies. It is resistant to a wide range of... [See More]
- Industry: Marine; OEM / Industrial
- Chemistry: Epoxy; Resin
- Type: Coating; Clear Coat
- Substrate: Metallic; Steel
from Columbia Chemical Corporation
MARQUEE ® ENVY MP is an ELV compliant, mid phosphorous, electroless nickel plating process. It contains no lead nor cadmium, and meets ASTM-B-733 and AMS2404 C specifications. Being a two component process, it is easy to use and has a 1:1 replenishment rate. It provides a deep, brilliant... [See More]
- Industry: Automotive; Electronics; Machine Tools; Marine; Mil-Spec; OEM / Industrial; Process Equipment
- Chemistry: Electroless Nickel Plating Solution
- Type: Coating; Electroless Nickel Deposit
- Substrate: Aluminum; Steel; Other; Brass
from Chase Products Co.
Penetrating Oil and Demoisturant will displace water and moisture-proof all types of electrical equipment, even if the equipment is completely submerged. It saves production, maintenance and repair time, protects and preserves valuable equipment, waterproofs ignition systems, and protects metal... [See More]
- Industry: Automotive; Machine Tools; OEM / Industrial
- Substrate: Metallic
- Type: Coating
- Cure / Setting Technology: Multicomponent
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Structural Adhesive Primer EW-5000 AS is a sprayable, low VOC, heat curing, structural adhesive primer that contains a non-chromated, corrosion inhibiting package to provide protection against corrosive environments. Complies witrh OSHA 29 CFR 1910.1026. Less than 5... [See More]
- Industry: OEM / Industrial
- Substrate: Aluminum; Metallic
- Type: Coating; Primer; Adhesive Primer
- Form: Liquid; Water
from Pavco, Inc.
HyProTec 1010 Automotive - A high performance trivalent passivate for zinc electrodeposits. In addition to automotive cyclical requirements, HyProTec 1010 will provide over 120 hours of corrosion resistance to electrodeposited zinc per ASTM B 117. A Teflon immersion heater is recommended. [See More]
- Industry: Automotive; OEM / Industrial
- Substrate: Other; Trivalent Passivate
- Type: Coating; Clear Coat
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®REXTHANE I FLOOR COATING is a high solids, single component, aliphatic, moisture cure urethane, VOC complying, moisture resistant industrial floor coating. This urethane coating cures to a high gloss and chemical resistant film equivalent to two-part urethane coatings. Impact and... [See More]
- Industry: Marine; OEM / Industrial
- Chemistry: Polyurethane; Resin; Aliphatic
- Type: Coating; Clear Coat
- Substrate: Concrete; Steel; Wood; Other; Metalizing, Steel with Zinc
from Rust-Oleum Corporation
Two component, low odor, low VOC, 100% solids epoxy floor coating [See More]
- Industry: OEM / Industrial
- Chemistry: Epoxy; Resin
- Type: Coating; Base Coat
- Substrate: Concrete
from Henkel Corporation - Industrial
LOCTITE STYCAST PC 18M, Urethane, Conformal Coating LOCTITE ® STYCAST PC 18M is a solvent based one component urethane coating which may be cured at room temperature. This material retains its light color after long exposure to elements. Solvent resistant. Resistance to discoloration. [See More]
- Industry: OEM / Industrial
- Substrate: Metallic
- Type: Coating
- Operating Temperature: 104 to 230
from Minerallac Company
TOUGH COAT ACRYLIC ENAMEL TYPE. ELECTRICAL EQUIPMENT, METAL, MOTORS, MACHINERY TOOLS, RAILING APPLICATION. CAN CONTAINER TYPE. 12 OZ CONTAINER CAPACITY. OSHA RED COLOR/SHADE. 15 MIN TOUCH DRY TIME. KRYLON[R], TOUGH COAT[R] BRAND. CONTAINER SIZE 16 OZ. PACKAGING QUANTITY 12 [See More]
- Industry: OEM / Industrial
- Chemistry: Acrylic
- Type: Enamel; Paint
- Form: Liquid
from Dampney Company, Inc.
Heat resistant coatings, color stable ambient to 500F (260C) [See More]
- Industry: OEM / Industrial
- Chemistry: Resin; Silicone
- Type: Coating; Clear Coat
- Substrate: Metallic; Steel; Other; Stainless Steel
from Columbia Chemical Corporation
Lac-Chro-SEAL ® is a non-hazardous lacquer coating for enhanced corrosion resistance on electroplated deposits and base metals. It air dries quickly to a very thin, clear & glossy finish which prevents fingerprints and provides significant protection to high humidity conditions. [See More]
- Industry: Automotive; Electronics; Marine; Mil-Spec; OEM / Industrial
- Chemistry: Acrylic; Zinc
- Type: Coating; Clear Coat; Lacquer; Sealer
- Substrate: Metallic; Other; Zinc & Zinc Alloy Deposits Over Steel
from Chase Products Co.
Silicone Lubricant frees sticking mechanisms, eliminates fan belt squeaks, metal-to-metal noises and rubber-to-metal squeaks. It repels water and ice and retards rust and corrosion, lubricates hinges and prevents freezing of exposed locks. Excellent for waterproofing ignition systems and other... [See More]
- Industry: Automotive; Machine Tools; OEM / Industrial
- Substrate: Metallic
- Type: Coating; Primer
- Cure / Setting Technology: Multicomponent
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Structural Adhesive Primer EW-5000 is a sprayable, waterbased, low VOC, heat curing, chromated, corrosion inhibiting primer that can provide protection against corrosive environments. Scotch-Weld EW-5000 primer is designed to provide ambient temperature drying with... [See More]
- Industry: OEM / Industrial
- Substrate: Aluminum; Metallic
- Type: Coating; Primer; Adhesive Primer
- Form: Liquid; Water
from Pavco, Inc.
HyProCoat 320 - A non-chrome top coat for chromated electrodeposited zinc that meets the corrosion protection requirements of automotive specifications. [See More]
- Industry: Automotive; OEM / Industrial
- Substrate: Other; Chromated Zinc
- Type: Coating; Clear Coat; Sealer
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®TREAD-PLEX PRIMER is a general purpose, interior/exterior, VOC compliant, 100% acrylic, low odor, waterborne primer. One component. Water clean up. Fast dry. RECOMMENDED USAGE. For use over prepared concrete and wood floors, steps, stairwells, aisleways, or previously painted floor... [See More]
- Industry: Medical; OEM / Industrial; Process Equipment
- Chemistry: Acrylic; Resin
- Type: Coating; Primer
- Substrate: Concrete; Wood
from Rust-Oleum Corporation
Clear, fast drying, oil modified, single component waterborne polyurethane [See More]
- Industry: OEM / Industrial
- Chemistry: Polyurethane; Resin
- Type: Coating; Clear Coat
- Substrate: Concrete; Wood
from Henkel Corporation - Industrial
LOCTITE STYCAST PC 40-UMF, Urethane Acrylate, Conformal coating LOCTITE ® STYCAST PC 40-UMF conformal coating is specifically formulated to rapidly gel and immobilize when exposed to UV light and then fully cure when exposed to atmospheric moisture, ensuring optimum performance even in shadowed... [See More]
- Industry: OEM / Industrial
- Substrate: Metallic
- Type: Coating
- Form: Aerosol; Transfer Tape
from Minerallac Company
TOUGH COAT ACRYLIC ENAMEL TYPE. ELECTRICAL EQUIPMENT, METAL, MOTORS, MACHINERY TOOLS, RAILING APPLICATION. CAN CONTAINER TYPE. 12 OZ CONTAINER CAPACITY. OSHA BLUE COLOR/SHADE. 15 MIN TOUCH DRY TIME. KRYLON[R], TOUGH COAT[R] BRAND. CONTAINER SIZE 16 OZ. PACKAGING QUANTITY 12 [See More]
- Industry: OEM / Industrial
- Chemistry: Acrylic
- Type: Enamel; Paint
- Form: Liquid
from Dampney Company, Inc.
Heat resistant coatings color stable to 500F [See More]
- Industry: OEM / Industrial
- Chemistry: Resin; Silicone
- Type: Coating; Clear Coat
- Substrate: Metallic; Steel; Other; Stainless Steel
from Columbia Chemical Corporation
Zinc-Chro-SHIELD ® is a unique sealer for chromated zinc deposits which dramatically increases corrosion protection at very little additional cost. And since it's added to the final stagnant rinse at low concentrations (1% to 8% by volume), no additional equipment is required. Zinc-Chro-SHIELD... [See More]
- Industry: Automotive; Electronics; Marine; Mil-Spec; OEM / Industrial
- Chemistry: Zinc; Silicate Based
- Type: Coating; Sealer
- Substrate: Steel; Other; Zinc & Zinc Alloy Deposits Over Steel
from Chase Products Co.
Silicone Mold Release Spray is a colorless, dry spray that reduces friction and buildup on molds without leaving an oily or greasy surface. Dries fast. Extends the life of equipment. Cuts cleanup time. This non-staining formula has a low surface tension and performs in temperatures from -47 °F... [See More]
- Industry: Machine Tools; OEM / Industrial
- Substrate: Glass; Metallic; Wood; Other; Rubber
- Type: Coating
- Cure / Setting Technology: Multicomponent
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®TREAD-PLEX is a general purpose, interior/ exterior, VOC compliant, 100% acrylic, low odor, waterborne floor coating. This dries rapidly to a tough, alkali resistant finish which will withstand hard wear, abrasion, grease, oils, and cleaning equipment. One component. Water clean up. [See More]
- Industry: Medical; OEM / Industrial
- Chemistry: Acrylic; Resin
- Type: Coating; Clear Coat
- Substrate: Concrete; Wood
from Rust-Oleum Corporation
High heat resistance, two coat system for exterior heat exposure conditions [See More]
- Industry: OEM / Industrial; Process Equipment
- Chemistry: Resin; Zinc; Metal Filled; Silicone
- Type: Coating; Base Coat; Paint
- Substrate: Metallic; Steel
from Henkel Corporation - Industrial
LOCTITE STYCAST PC 62, Acrylic, Conformal Coating LOCTITE ® STYCAST PC 62 conformal coating is a rapid drying acrylic for circuit board protection applications. Fluorescent under UV light. Provides environmental and mechanical protection. Toluene-free alternative. Superior toughness and... [See More]
- Industry: OEM / Industrial
- Substrate: Metallic
- Type: Coating
- Form: Transfer Tape
from Minerallac Company
TOUGH COAT ACRYLIC ENAMEL TYPE. ELECTRICAL EQUIPMENT, METAL, MOTORS, MACHINERY TOOLS, RAILING APPLICATION. CAN CONTAINER TYPE. 12 OZ CONTAINER CAPACITY. OSHA ORANGE COLOR/SHADE. 15 MIN TOUCH DRY TIME. KRYLON[R], TOUGH COAT[R] BRAND. CONTAINER SIZE 16 OZ. PACKAGING QUANTITY 12 [See More]
- Industry: OEM / Industrial
- Chemistry: Acrylic
- Type: Enamel; Paint
- Form: Liquid
from Dampney Company, Inc.
Zinc silicone primer, heat resistant ambient to 500F (260C) [See More]
- Industry: OEM / Industrial
- Chemistry: Resin; Zinc; Silicone
- Type: Coating; Primer
- Substrate: Metallic; Steel
from Columbia Chemical Corporation
COLDIP ® Satin Zinc 900 is a unique all "trivalent" chromate conversion coating for electroplated zinc that provides a uniform satin zinc finish, similar in appearance to satin nickel and satin silver. It is an easy-to-use one part system that provides 96 - 168 hours of neutral salt spray to... [See More]
- Industry: Automotive; Electronics; Marine; Mil-Spec; OEM / Industrial
- Chemistry: Conversion; Zinc
- Type: Coating; Chromates for Zinc Plating
- Substrate: Steel; Other; Zinc & Zinc Alloy Deposits Over Steel
from Sherwin-Williams Protective & Marine Coatings
SherPlate PW Epoxy. SherPlate PW Epoxy is an edge retentive, ultra high solids epoxyamine coating engineered for immersion service in potable water pipes and storage tanks. The rapid return to service and high build, edge retentive properties of this coating provide superior protection. One or two... [See More]
- Industry: Marine; OEM / Industrial
- Chemistry: Epoxy; Resin
- Type: Coating
- Substrate: Concrete; Metallic; Steel
from Rust-Oleum Corporation
Clear, unpigmented, two component, zero VOC waterborne epoxy primer. [See More]
- Industry: OEM / Industrial
- Chemistry: Epoxy; Resin
- Type: Coating; Primer; Sealer
- Substrate: Concrete
from Henkel Corporation - Industrial
LOCTITE STYCAST SC 3613, Silicone, Protective Coating LOCTITE ® STYCAST SC 3613 protective coating is engineered to meet the high reliability performance requirements for the optoelectronic / semiconductor industry. It minimizes alpha particle interactions with sensitive circuitry. Elastomeric. [See More]
- Industry: OEM / Industrial
- Substrate: Metallic
- Type: Coating
- Operating Temperature: 104 to 392
from Minerallac Company
TOUGH COAT ACRYLIC ENAMEL TYPE. ELECTRICAL EQUIPMENT, METAL, MOTORS, MACHINERY TOOLS, RAILING APPLICATION. CAN CONTAINER TYPE. 12 OZ CONTAINER CAPACITY. ASA49 MACHINERY DARK GRAY COLOR/SHADE. 15 MIN TOUCH DRY TIME. KRYLON[R], TOUGH COAT[R] BRAND. CONTAINER SIZE 16 OZ. PACKAGING QUANTITY 12 [See More]
- Industry: OEM / Industrial
- Chemistry: Acrylic
- Type: Enamel; Paint
- Form: Liquid
from Dampney Company, Inc.
Zinc silicone primer heat resistant to 500F [See More]
- Industry: OEM / Industrial
- Chemistry: Resin; Zinc; Silicone
- Type: Coating; Primer
- Substrate: Metallic; Steel
from Columbia Chemical Corporation
COLDIP ® TRI-V 120 is a high corrosion resistant "Trivalent Blue-Bright" chromate conversion coating for electroplated zinc, providing over 120 hours of neutral salt spray to white corrosion. It is approved by General Motors Worldwide under the GMW 3044 specification. [See More]
- Industry: Automotive; Electronics; Marine; Mil-Spec; OEM / Industrial
- Chemistry: Conversion; Zinc
- Type: Coating; Chromates for Zinc Plating
- Substrate: Steel; Other; Zinc & Zinc Alloy Deposits Over Steel