Encoder Following / Slave Motion Controllers
from ElectroCraft
SCA-L Drives. Technology: PMDC Servo Amplifier. Quadrants: 4. Nominal Current: 3A. For Brush-Commutated PMDC Motors. Up to 75 W. This linear four-quadrant PMDC DC servo amplifier is fully enclosed in a rugged aluminum case which can be panel mounted for easy integration. The drive is available in... [See More]
- Operating Mode: Slave
- Axes: 1.0
- Product: Speed Controller
- Motor / System: Permanent Magnet
from PI (Physik Instrumente) L.P.
ACS motion controller with integrated ACS driver and integrated module for safe torque off (STO). Directly compatible with positioners from PI. For AC servo motors / brushless DC motors, brushed DC motors, voice coil motors, stepper motors. Output power per axis to 1500 W. Many options for... [See More]
- Operating Mode: Slave
- Motor / System: DC Brushed; DC Brushless; AC Servo; Voice Coil
- Axes: 2.0 to 4.0
- AC Input: 100 to 250
from ElectroCraft
The ElectroCraft PRO Series Programmable Servo Drives are based on the latest in digital drive technology, offering a cost effective, compact and modular solution for the control of rotary or linear brushless, stepper or PMDC brush motors. The ElectroCraft PRO Series drives integrate advanced motion... [See More]
- Operating Mode: Slave; Other; Hall Sensor
- Axes: 1.0
- Product: Speed Controller
- Motor / System: DC Brushed; DC Brushless
from Galil
The CDS-3310 is a single-axis controller and drive system for precisely controlling a brush or brushless servo motor. It combines a high-performance, programmable motion controller with a 500W PWM drive in a compact, cost-effective package. The CDS-3310 provides a 10/100 Base-T Ethernet port and up... [See More]
- Operating Mode: Position; Analog; Velocity; Torque; Slave
- Resolution: 32
- Product: Controller / Drive; PC-Based; MCU
- Axes: 1.0
from Aerotech, Inc.
Design Features. Network drives through a high-speed serial interface to coordinate up to ten axes of motion. Coordinate motion using up to five independent tasks. Drive and control linear or rotary brushless, DC brush servo, and micro-stepping motors. Command various motion types including:... [See More]
- Operating Mode: Position; Slave
- Axes: 1.0
- Product: Controller / Drive; DSP
- Motor / System: DC Brushed; DC Brushless; DC Servo; AC Servo; Permanent Magnet; Hybrid; Microstepping Motor; Linear
from Enfield Technologies
Enfield ’s S2 is a servo pneumatic proportional control system offering an all in one pneumatic system capable of positioning heavy loads at high speeds for lower cost than competing electric drives and hydraulic systems. Simple by design, the S2 has an integrated controller, removing the need... [See More]
- Operating Mode: Position; Analog; Voltage; Torque; Slave
- Motor / System: Linear; Pneumatic
- Axes: 1.0
- Servo Feedback: Analog Position
from Gantner Instruments, Inc.
The Q.series EC C101 combines powerful System-on-a-Chip computing with the flexibility of EtherCAT communication. This unique design greatly simplifies the implementation of reliable high-speed multi-axis servo control solutions. It has never been so easy to create an integrated control and... [See More]
- Operating Mode: Slave
- Resolution: 18
- Product: Multi-Axis
- Voltage: 10
from Kollmorgen Corporation
This digital multi-axis system operates directly from 115 to 400 VAC lines and provides output current of 3 or 6 Amps RMS/phase, continuous. It supports 1 master and up to 7 extension axes, is CANopen compatible, and is fully programmable via an RS232 interface. These drives are supported for... [See More]
- Operating Mode: Position; Velocity; Slave; Other; Electronic Gearing
- AC Input: 115 to 400
- Product: Multi-Axis
- Phase : Single Phase; Three Phase
from Simple Step LLC
Dual axis bipolar stepper controller for motors up to 1.5 amps per phase. (All products have no communications pre-installed and customers must now specify and purchase communications boards separately to make a complete system.). We Make Simple Motion Controllers. Over 15 years ago our founder had... [See More]
- Operating Mode: Slave
- Resolution: 8
- Product: Multi-Axis
- Axes: 2.0
from Galil
The DMC-18x0 PCI motion controller is a member of the Optima Series, Galil's prior-generation, multi-axis motion controllers. The DMC-18x0 controller accommodates 1- through 8-axis formats and allows control of step or servo motors on any combination of axes. Any mode of motion can be programmed... [See More]
- Operating Mode: Position; Analog; Velocity; Torque; Slave
- Resolution: 16
- Product: Controller / Drive; PC-Based
- PC-Based Bus: PCI
from Aerotech, Inc.
Design Features. Single-axis digital servo controller with integral power supply and amplifier. Advanced software architecture shortens customer development time; use C#, VB.Net, C, and LabVIEW?? combined with our full IDE and multitasking operating system. Host-mode operation allows you to send... [See More]
- Operating Mode: Position; Slave
- Axes: 1.0
- Product: Controller / Drive; DSP
- Motor / System: DC Brushed; DC Brushless; DC Servo; AC Servo; Permanent Magnet; Hybrid; Microstepping Motor; Linear
from Simple Step LLC
Dual axis bipolar stepper controller for motors up to 3.125 amps per phase. (All products have no communications or heat sinks pre-installed and customers must now specify and purchase communications boards and heat sinks separately to make a complete system. Heat sinks are not necessarily needed... [See More]
- Operating Mode: Slave
- Resolution: 8
- Product: Multi-Axis
- Axes: 2.0
from Galil
The DMC-22x0 stand-alone motion controller is a member of the Optima Series, Galil's prior-generation, multi-axis motion controllers. The DMC-22x0 features 10Base-T/100Base-T Ethernet connectivity. The controller is packaged in a compact, rugged enclosure and contains an internal power supply for... [See More]
- Operating Mode: Position; Analog; Velocity; Torque; Slave
- Resolution: 16
- Product: Controller / Drive
- Axes: 1.0
from Simple Step LLC
Single axis bipolar stepper controller for motors up to 1.5 amps per phase. (All products have no communications pre-installed and customers must now specify and purchase communications boards separately to make a complete system.). We Make Simple Motion Controllers. Over 15 years ago our founder... [See More]
- Operating Mode: Slave
- Axes: 1.0
- Resolution: 8
- Motor / System: Bipolar
from Galil
The DMC-41x3 motion controller is Galil's latest generation Econo motor controller. Compared with the DMC-21x3 Econo controller, the DMC-41x3 offers the following enhancements: 100BASE-T Ethernet, aux RS232 port, USB port, uncommitted analog inputs, accepts 15 MHz encoder frequencies, more program... [See More]
- Operating Mode: Position; Analog; Velocity; Torque; Slave
- Resolution: 16
- Product: Controller / Drive; Multi-Axis; PC-Based
- PC-Based Bus: PCI
from Simple Step LLC
Single axis bipolar stepper controller for motors up to 3.125 amps per phase. (All products have no communications and Heat sink pre-installed and customers must now specify and purchase communications boards and heat sinks separately to make a complete system. A heat sink is not necessarily needed... [See More]
- Operating Mode: Slave
- Axes: 1.0
- Resolution: 8
- Motor / System: Bipolar
from Galil
Galil's Econo Series motion controllers deliver precise, multi-axis control in a low-cost package. Prices for the 4-axis Econo controllers are as low as $395 in 1,000 quantities which is less than $100 per axis. Econo controllers don't stint on performance and can handle any mode of motion with... [See More]
- Operating Mode: Position; Analog; Velocity; Torque; Slave
- Resolution: 16
- Product: Controller / Drive; PC-Based
- PC-Based Bus: PCI
from Simple Step LLC
NEMA 17 size bipolar stepper motion controller. Single axis. Low current. Motor mounted. We Make Simple Motion Controllers. Over 15 years ago our founder had an idea: a simple motion control system that would allow for easy plug-and-play control and very simple ASCII command structure and that could... [See More]
- Operating Mode: Slave
- Axes: 1.0
- Resolution: 8
- Motor / System: Bipolar
from Galil
The DMC-18x6 motion controller is Galil's highest performance PCI bus motion controller. It belongs to Galil's latest generation motion controller family: the Accelera Series, which accepts encoder inputs up to 22 MHz, provides servo update rates as high as 32 kHz, and processes commands as fast as... [See More]
- Operating Mode: Position; Analog; Velocity; Torque; Slave
- Resolution: 32
- Product: Controller / Drive; PC-Based
- PC-Based Bus: PCI
from Simple Step LLC
Triple axis bipolar stepper controller for motors up to 1.5 amps per phase. (All products have no communications pre-installed and customers must now specify and purchase communications boards separately to make a complete system.). We Make Simple Motion Controllers. Over 15 years ago our founder... [See More]
- Operating Mode: Slave
- Resolution: 8
- Product: Multi-Axis
- Axes: 3.0
from Galil
The DMC-40x0 motion controller is Galil's highest performance, stand-alone motion controller. It belongs to Galil's latest generation motion controller family: the Accelera Series, which accepts encoder inputs up to 22 MHz, provides servo update rates as high as 32 kHz, and processes commands as... [See More]
- Operating Mode: Position; Analog; Velocity; Torque; Slave
- Resolution: 16
- Product: Controller / Drive; Multi-Axis; PC-Based
- PC-Based Bus: PCI
from Simple Step LLC
Triple axis bipolar stepper controller for motors up to 3.125 amps per phase. (All products have no communications or heat sinks pre-installed and customers must now specify and purchase communications boards and heat sinks separately to make a complete system. Heat sinks are not necessarily needed... [See More]
- Operating Mode: Slave
- Resolution: 8
- Product: Multi-Axis
- Axes: 3.0