Analog Position Motion Controllers
from PI (Physik Instrumente) L.P.
Integrated power amplifier and voltage generator for piezo inertia drives. Data recorder for high speed tracing. TCP/IP or USB interface. Extensive software support: LabVIEW, MATLAB, C / C++ / C# / VB.NET, Python. Optional joystick for manual operation [See More]
- Servo Feedback: Absolute Encoder; Analog Position; Sine / Cosine
- DC Input: 24
- Axes: 1.0
- Power: 30
from Nidec Control Techniques
Digitax ST servo drives are optimized for pulse duty servo applications requiring high peak torque (up to 300% peak), dynamic response, ease of use and flexible integration features. Digitax ST drives are perfectly matched for use with Unimotor hd servo motors. 230V models are suitable for single... [See More]
- Servo Feedback: Resolver (optional feature); Incremental Encoder; Absolute Encoder; Analog Position; Sine / Cosine
- Axes: 1.0 to 1.5
- Product: Speed Controller
- AC Input: 200 to 230
from Enfield Technologies
Enfield Technologies ’ LS - C41 pneumatic systems controllers offer flexible PID with feed - forward control topology for the serious control systems engineer. The LS - C41contains the driver f or those valves that require it. The LS - C41 ’s adjustable gain, dead-band, and dither (both... [See More]
- Servo Feedback: Analog Position
- Motor / System: Linear; Pneumatic
- Axes: 1.0
- DC Input: 18 to 36
from Galil
The CDS-3310 is a single-axis controller and drive system for precisely controlling a brush or brushless servo motor. It combines a high-performance, programmable motion controller with a 500W PWM drive in a compact, cost-effective package. The CDS-3310 provides a 10/100 Base-T Ethernet port and up... [See More]
- Servo Feedback: Hall Effect; Resolver; Tachometer; Incremental Encoder; Absolute Encoder (optional feature); Analog Position; Other; Auxiliary Encoder
- Resolution: 32
- Product: Controller / Drive; PC-Based; MCU
- Axes: 1.0
from Nidec Control Techniques
Unidrive SP drives can be configured to operate in the following modes: Open-loop V/Hz AC drive. Open-loop Vector AC drive. Open-loop Rotor Flux Control (RFC). Closed-loop Vector AC drive. Servo for synchronous permanent magnet motors / brushless servo motors. The drives are easy to install and... [See More]
- Servo Feedback: Resolver; Incremental Encoder; Absolute Encoder; Analog Position; Sine / Cosine
- Axes: 1.0
- Product: Speed Controller; Regenerative
- Motor / System: Induction; Sensorless Vector; Vector Feedback
from Enfield Technologies
Enfield ’s S2 is a servo pneumatic proportional control system offering an all in one pneumatic system capable of positioning heavy loads at high speeds for lower cost than competing electric drives and hydraulic systems. Simple by design, the S2 has an integrated controller, removing the need... [See More]
- Servo Feedback: Analog Position
- Motor / System: Linear; Pneumatic
- Axes: 1.0
- Operating Mode: Position; Analog; Voltage; Torque; Slave
from Galil
The DMC-18x0 PCI motion controller is a member of the Optima Series, Galil's prior-generation, multi-axis motion controllers. The DMC-18x0 controller accommodates 1- through 8-axis formats and allows control of step or servo motors on any combination of axes. Any mode of motion can be programmed... [See More]
- Servo Feedback: Hall Effect; Resolver; Incremental Encoder; Absolute Encoder (optional feature); Analog Position; Other; Auxiliary Encoder
- Resolution: 16
- Product: Controller / Drive; PC-Based
- PC-Based Bus: PCI
from Nidec Control Techniques
Unidrive SP drives can be configured to operate in the following modes: Open-loop V/Hz AC drive. Open-loop Vector AC drive. Open-loop Rotor Flux Control (RFC). Closed-loop Vector AC drive. Servo for synchronous permanent magnet motors / brushless servo motors. The drives are easy to install and... [See More]
- Servo Feedback: Resolver; Incremental Encoder; Absolute Encoder; Analog Position; Sine / Cosine
- Axes: 1.0
- Product: Speed Controller; Regenerative
- Motor / System: Induction; Sensorless Vector; Vector Feedback
from Enfield Technologies
The LS-C10 is a proportional system controller and driver. It is primarily used in conjunction with Enfield Technologies valves and other components to create pneumatic sub-systems. It may also be used to control or drive certain hydraulic and electric motors and systems. The LS-C10 can be... [See More]
- Servo Feedback: Analog Position
- Motor / System: Linear; Pneumatic; Hydraulic
- Axes: 1.0
- DC Input: 12 to 15
from Galil
The DMC-22x0 stand-alone motion controller is a member of the Optima Series, Galil's prior-generation, multi-axis motion controllers. The DMC-22x0 features 10Base-T/100Base-T Ethernet connectivity. The controller is packaged in a compact, rugged enclosure and contains an internal power supply for... [See More]
- Servo Feedback: Hall Effect; Resolver; Incremental Encoder; Absolute Encoder (optional feature); Analog Position; Other; Auxiliary Encoder
- Resolution: 16
- Product: Controller / Drive
- Axes: 1.0
from Nidec Control Techniques
Unidrive SP drives can be configured to operate in the following modes: Open-loop V/Hz AC drive. Open-loop Vector AC drive. Open-loop Rotor Flux Control (RFC). Closed-loop Vector AC drive. Servo for synchronous permanent magnet motors / brushless servo motors. The drives are easy to install and... [See More]
- Servo Feedback: Resolver; Incremental Encoder; Absolute Encoder; Analog Position; Sine / Cosine
- Axes: 1.0
- Product: Speed Controller; Regenerative
- Motor / System: Induction; Sensorless Vector; Vector Feedback
from Enfield Technologies
Enfield ’s S2 is a servo pneumatic proportional control system offering an all in one pneumatic system capable of positioning heavy loads at high speeds for lower cost than competing electric drives and hydraulic systems. Simple by design, the S2 has an integrated controller, removing the need... [See More]
- Servo Feedback: Analog Position
- Motor / System: Pneumatic
- Axes: 1.0
- DC Input: 12 to 24
from Galil
The DMC-41x3 motion controller is Galil's latest generation Econo motor controller. Compared with the DMC-21x3 Econo controller, the DMC-41x3 offers the following enhancements: 100BASE-T Ethernet, aux RS232 port, USB port, uncommitted analog inputs, accepts 15 MHz encoder frequencies, more program... [See More]
- Servo Feedback: Hall Effect; Resolver; Incremental Encoder; Absolute Encoder (optional feature); Analog Position; Other; Auxiliary Encoder
- Resolution: 16
- Product: Controller / Drive; Multi-Axis; PC-Based
- PC-Based Bus: PCI
from Nidec Control Techniques
Unidrive SP drives can be configured to operate in the following modes: Open-loop V/Hz AC drive. Open-loop Vector AC drive. Open-loop Rotor Flux Control (RFC). Closed-loop Vector AC drive. Servo for synchronous permanent magnet motors / brushless servo motors. The drives are easy to install and... [See More]
- Servo Feedback: Resolver; Incremental Encoder; Absolute Encoder; Analog Position; Sine / Cosine
- Axes: 1.0
- Product: Speed Controller; Regenerative
- Motor / System: Induction; Sensorless Vector; Vector Feedback
from Galil
Galil's Econo Series motion controllers deliver precise, multi-axis control in a low-cost package. Prices for the 4-axis Econo controllers are as low as $395 in 1,000 quantities which is less than $100 per axis. Econo controllers don't stint on performance and can handle any mode of motion with... [See More]
- Servo Feedback: Hall Effect; Resolver; Incremental Encoder; Absolute Encoder (optional feature); Analog Position; Other; Auxiliary Encoder
- Resolution: 16
- Product: Controller / Drive; PC-Based
- PC-Based Bus: PCI
from Nidec Control Techniques
Unidrive SP drives can be configured to operate in the following modes: Open-loop V/Hz AC drive. Open-loop Vector AC drive. Open-loop Rotor Flux Control (RFC). Closed-loop Vector AC drive. Servo for synchronous permanent magnet motors / brushless servo motors. The drives are easy to install and... [See More]
- Servo Feedback: Resolver; Incremental Encoder; Absolute Encoder; Analog Position; Sine / Cosine
- Axes: 1.0
- Product: Speed Controller; Regenerative
- Motor / System: Induction; Sensorless Vector; Vector Feedback
from Galil
The DMC-18x6 motion controller is Galil's highest performance PCI bus motion controller. It belongs to Galil's latest generation motion controller family: the Accelera Series, which accepts encoder inputs up to 22 MHz, provides servo update rates as high as 32 kHz, and processes commands as fast as... [See More]
- Servo Feedback: Hall Effect; Resolver; Incremental Encoder; Absolute Encoder (optional feature); Analog Position; Other; Auxiliary Encoder
- Resolution: 32
- Product: Controller / Drive; PC-Based
- PC-Based Bus: PCI
from Nidec Control Techniques
Unidrive SP drives can be configured to operate in the following modes: Open-loop V/Hz AC drive. Open-loop Vector AC drive. Open-loop Rotor Flux Control (RFC). Closed-loop Vector AC drive. Servo for synchronous permanent magnet motors / brushless servo motors. The drives are easy to install and... [See More]
- Servo Feedback: Resolver; Incremental Encoder; Absolute Encoder; Analog Position; Sine / Cosine
- Axes: 1.0
- Product: Speed Controller; Regenerative
- Motor / System: Induction; Sensorless Vector; Vector Feedback
from Galil
The DMC-40x0 motion controller is Galil's highest performance, stand-alone motion controller. It belongs to Galil's latest generation motion controller family: the Accelera Series, which accepts encoder inputs up to 22 MHz, provides servo update rates as high as 32 kHz, and processes commands as... [See More]
- Servo Feedback: Hall Effect; Resolver; Incremental Encoder; Absolute Encoder (optional feature); Analog Position; Other; Auxiliary Encoder
- Resolution: 16
- Product: Controller / Drive; Multi-Axis; PC-Based
- PC-Based Bus: PCI
from Nidec Control Techniques
Unidrive SP drives can be configured to operate in the following modes: Open-loop V/Hz AC drive. Open-loop Vector AC drive. Open-loop Rotor Flux Control (RFC). Closed-loop Vector AC drive. Servo for synchronous permanent magnet motors / brushless servo motors. The drives are easy to install and... [See More]
- Servo Feedback: Resolver; Incremental Encoder; Absolute Encoder; Analog Position; Sine / Cosine
- Axes: 1.0
- Product: Speed Controller; Regenerative
- Motor / System: Induction; Sensorless Vector; Vector Feedback