Full Step Motor Motion Controllers
from PI (Physik Instrumente) L.P.
Key Features. 62.5 µs (250 µs) microsecond per axes servo update rate. Up to 8 axes of motion control. Controls servo motors, step motors, and hydraulics. Maximum encoder input rate up to 22 MHz (Accelera). Non-volatile program memory. Multitasking of four independent programs. Modes of... [See More]
- Motor / System: DC Servo; Full-Step; Half-Step; Microstepping Motor; Hydraulic
- Resolution: 12
- Product: PC-Based
- PC-Based Bus: PCI
from Newport MKS
The XPS-DRV11 is a software configurable universal digital driver card that has been optimized to perform with the most Newport ’s and other companies ’ DC brush, Linear and Stepper motor positioners. The XPS-DRV11 can supply PWM output of up to 100 kHz with a maximum output current of 6... [See More]
- Motor / System: Full-Step
- Power: 600
- Axes: 1.0
- Peak Current: 6
from Newport MKS
The SMC100PP is a single axis motion controller/driver for 2-phase stepper motors up to 48 VDC at 1.1A peak per phase. It is a compact and low-cost controller for most of Newport ’s stages, like the UTS and ILS linear stages, URS rotation stages, and TRA actuators. Communication with the... [See More]
- Motor / System: Full-Step
- Communication: RS232; RS485; USB
- Axes: 1.0
from Newport MKS
The XPS-DRV01 is a software configurable PWM amplifier that is compatible with most of Newport ’s and other companies ’ DC brush and 2-phase stepper motor positioners. When used with Newport stages, the configuration of the amplifier is easily completed using the auto-configuration... [See More]
- Motor / System: Full-Step
- Power: 144
- Axes: 1.0
- Peak Current: 3
from Galil
The DMC-18x0 PCI motion controller is a member of the Optima Series, Galil's prior-generation, multi-axis motion controllers. The DMC-18x0 controller accommodates 1- through 8-axis formats and allows control of step or servo motors on any combination of axes. Any mode of motion can be programmed... [See More]
- Motor / System: DC Brushless; DC Servo; AC Servo; Unipolar; Bipolar; Permanent Magnet; Variable Reluctance; Full-Step; Half-Step; Microstepping Motor; Linear; Voice Coil
- Resolution: 16
- Product: Controller / Drive; PC-Based
- PC-Based Bus: PCI
from Galil
The DMC-22x0 stand-alone motion controller is a member of the Optima Series, Galil's prior-generation, multi-axis motion controllers. The DMC-22x0 features 10Base-T/100Base-T Ethernet connectivity. The controller is packaged in a compact, rugged enclosure and contains an internal power supply for... [See More]
- Motor / System: DC Brushless; DC Servo; AC Servo; Unipolar; Bipolar; Permanent Magnet; Variable Reluctance; Full-Step; Half-Step; Microstepping Motor; Linear; Voice Coil
- Resolution: 16
- Product: Controller / Drive
- Axes: 1.0
from Galil
Galil's Econo Series motion controllers deliver precise, multi-axis control in a low-cost package. Prices for the 4-axis Econo controllers are as low as $395 in 1,000 quantities which is less than $100 per axis. Econo controllers don't stint on performance and can handle any mode of motion with... [See More]
- Motor / System: DC Brushless; DC Servo; AC Servo; Unipolar; Bipolar; Permanent Magnet; Variable Reluctance; Full-Step; Half-Step; Microstepping Motor; Linear; Voice Coil
- Resolution: 16
- Product: Controller / Drive; PC-Based
- PC-Based Bus: PCI
from Galil
Galil's Econo Series motion controllers deliver precise, multi-axis control in a low-cost package. Prices for the 4-axis Econo controllers are as low as $395 in 1,000 quantities which is less than $100 per axis. Econo controllers don't stint on performance and can handle any mode of motion with... [See More]
- Motor / System: DC Brushless; DC Servo; AC Servo; Unipolar; Bipolar; Permanent Magnet; Variable Reluctance; Full-Step; Half-Step; Microstepping Motor; Linear; Voice Coil
- Resolution: 16
- Product: Controller / Drive
- Axes: 1.0