Absolute Encoder Motion Controllers
from ElectroCraft
SCA-L Drives. Technology: PMDC Servo Amplifier. Quadrants: 4. Nominal Current: 3A. For Brush-Commutated PMDC Motors. Up to 75 W. This linear four-quadrant PMDC DC servo amplifier is fully enclosed in a rugged aluminum case which can be panel mounted for easy integration. The drive is available in... [See More]
- Servo Feedback: Tachometer; Absolute Encoder
- Axes: 1.0
- Product: Speed Controller
- Motor / System: Permanent Magnet
from PI (Physik Instrumente) L.P.
The A-81x series of motion controllers from PI offers a completely integrated electronics solution, with controller, drives, and power supplies packaged together in a compact 19-inch rack-mount enclosure. These controllers are designed and optimized to work with the PIglide line of air bearing... [See More]
- Servo Feedback: Incremental Encoder; Absolute Encoder; Sine / Cosine
- Axes: 1.0 to 4.0
- Product: Multi-Axis
- Motor / System: Voice Coil; DC Motors, 3-phase Brushless Motor
from PI (Physik Instrumente) L.P.
Integrated power amplifier and voltage generator for piezo inertia drives. Data recorder for high speed tracing. TCP/IP or USB interface. Extensive software support: LabVIEW, MATLAB, C / C++ / C# / VB.NET, Python. Optional joystick for manual operation [See More]
- Servo Feedback: Absolute Encoder; Analog Position; Sine / Cosine
- DC Input: 24
- Axes: 1.0
- Power: 30
from PI (Physik Instrumente) L.P.
Maximum average current consumption 3 A. 20 kHz control bandwidth. USB interface for sending commands and for configuration. Digital inputs and outputs. Optional analog input. Digital motion controller for PIMag ® linear motors. 1 motor channel, 1 sensor channel. For three-phase linear motors,... [See More]
- Servo Feedback: Absolute Encoder; Sine / Cosine
- DC Input: 24
- Axes: 1.0
- Phase : Three Phase
from PI (Physik Instrumente) L.P.
Digital motion controller for PIMag® linear motors1 motor channel, 1 sensor channel. For three-phase linear motors with currents of 5 A per phase. Sine-commutated operation, field-oriented current control. Automatic commutation angles adjustment. PID controller for position and velocity. Extensive... [See More]
- Servo Feedback: Absolute Encoder; Sine / Cosine
- Motor / System: Linear
- Axes: 1.0
- DC Input: 24 to 48
from PI (Physik Instrumente) L.P.
Broadband encoder input. Macro programmable for stand- alone. functionality. Data recorder. Nonvolatile EEPROM for macros and parameters. Digital I/ O ports (TTL). ID chip support. Interfaces: TCP/ IP and USB. Optional digital joystick for manual operation. Digital servo controller for piezo inertia... [See More]
- Servo Feedback: Absolute Encoder; Sine / Cosine
- Axes: 3.0
- Product: Multi-Axis
- DC Input: 24
from Galil
The DMC-300xx Series is Galil's latest generation single-axis motion controller. It uses a 32-bit RISC processor to provide higher speed than older models. The DMC-300xx is available as a compact card-level or box-level unit and connects to a stepper or servo motor amplifier of any power range. Or,... [See More]
- Servo Feedback: Absolute Encoder
- Axes: 1.0
- Resolution: 32
- DC Input: -12 to 12
from Parker Hannifin / Automation / Electromechanical Division - Europe
Up to 8 axes of servo or stepper control. 150 MFLOPS, 32-bit floating-point DSP. Advanced Multitasking of up to 24 simultaneous programs. Interpolation of 8 axes in any combination. Up to 10 encoder inputs at 20 MHz. 10/100 Base-T Ethernet. Supports EtherNet/IP protocol. USB2.0. Absolute Encoder... [See More]
- Servo Feedback: Absolute Encoder
- Resolution: 32
- Product: Multi-Axis
- Axes: 2.0 to 8.0
from Industrial Indexing Systems, Inc.
Luminary Series Servo Drives provide the OEM market with a low cost but high performance servo drive for use in applications such as x-y tables, actuators, roll feeders, or any requirement where true position, velocity and torque control are desired. The Luminary Series is a cost competitive... [See More]
- Servo Feedback: Incremental Encoder; Absolute Encoder
- Continuous Current: 10
- AC Input: 100 to 240
- Setup: Computer
from Aerotech, Inc.
Design Features. Complete motion capabilities include: point-to-point; linear, circular, helical, and spherical interpolation; velocity profiling; electronic gearing; on-the-fly trajectory modification; high speed I/O; camming. 1 to 32 axes of scalable, synchronized motion. Utilizes the power of the... [See More]
- Servo Feedback: Incremental Encoder; Absolute Encoder; Other; Dynamic Trajectory Correction
- Resolution: 16
- Product: PC-Based
- Axes: 32.0
from Gantner Instruments, Inc.
The Q.series EC C101 combines powerful System-on-a-Chip computing with the flexibility of EtherCAT communication. This unique design greatly simplifies the implementation of reliable high-speed multi-axis servo control solutions. It has never been so easy to create an integrated control and... [See More]
- Servo Feedback: Absolute Encoder
- Resolution: 18
- Product: Multi-Axis
- Voltage: 10
from Nidec Control Techniques
Digitax ST servo drives are optimized for pulse duty servo applications requiring high peak torque (up to 300% peak), dynamic response, ease of use and flexible integration features. Digitax ST drives are perfectly matched for use with Unimotor hd servo motors. 230V models are suitable for single... [See More]
- Servo Feedback: Resolver (optional feature); Incremental Encoder; Absolute Encoder; Analog Position; Sine / Cosine
- Axes: 1.0 to 1.5
- Product: Speed Controller
- AC Input: 200 to 230
from Parker Hannifin / Automation / Electromechanical Division - Europe
ETHERNET Powerlink expands the ACR9000 family by adding real-time motion control over standard Ethernet. The high-speed digital communications network enhances machine performance and configuration possibilities while reducing set-up time and installation complexity. Control of 16 ETHERNET Powerlink... [See More]
- Servo Feedback: Resolver; Incremental Encoder; Absolute Encoder
- Resolution: 12
- Product: Controller / Drive
- Axes: 1.0
from Aerotech, Inc.
Design Features. Up to 10 axes of coordinated motion. Multiple 10-axis systems can be controlled by a single PC via Ethernet or USB. Controller architecture capable of coordinating motion of up to five independent tasks. Capable of driving and controlling linear or rotary brushless, DC brush servo... [See More]
- Servo Feedback: Incremental Encoder; Absolute Encoder; Other; Dynamic Trajectory Correction
- Resolution: 16
- Product: PC-Based
- PC-Based Bus: Other; Ethernet/IP, Modbus TCP
from Nidec Control Techniques
Unidrive SP drives can be configured to operate in the following modes: Open-loop V/Hz AC drive. Open-loop Vector AC drive. Open-loop Rotor Flux Control (RFC). Closed-loop Vector AC drive. Servo for synchronous permanent magnet motors / brushless servo motors. The drives are easy to install and... [See More]
- Servo Feedback: Resolver; Incremental Encoder; Absolute Encoder; Analog Position; Sine / Cosine
- Axes: 1.0
- Product: Speed Controller; Regenerative
- Motor / System: Induction; Sensorless Vector; Vector Feedback
from Aerotech, Inc.
Design Features. Expand scanner field of view without sacrificing effective pixel resolution. Mark long vectors with one continuous pass. Draw large-scale graphics without stitching multiple exposures. Mark on a tube or other irregularly shaped object without manually repositioning. Industry... [See More]
- Servo Feedback: Absolute Encoder
- Axes: 8.0
- Resolution: 16
- Voltage: 5 to 24
from Nidec Control Techniques
Unidrive SP drives can be configured to operate in the following modes: Open-loop V/Hz AC drive. Open-loop Vector AC drive. Open-loop Rotor Flux Control (RFC). Closed-loop Vector AC drive. Servo for synchronous permanent magnet motors / brushless servo motors. The drives are easy to install and... [See More]
- Servo Feedback: Resolver; Incremental Encoder; Absolute Encoder; Analog Position; Sine / Cosine
- Axes: 1.0
- Product: Speed Controller; Regenerative
- Motor / System: Induction; Sensorless Vector; Vector Feedback
from Aerotech, Inc.
Design Features. 3U, 19-inch rack-mount design with integral drives. Flexible design provides the ability to drive brush, brushless, or stepper motors with the same amplifier. 5 A continuous, 10 amp peak output current. PWM or linear amplifiers. Integral power supplies. IEEE-1394 FireWire interface. [See More]
- Servo Feedback: Hall Effect; Incremental Encoder; Absolute Encoder; Sine / Cosine
- Resolution: 12
- Product: Controller / Drive; Multi-Axis
- Axes: 4.0 to 8.0
from Nidec Control Techniques
Unidrive SP drives can be configured to operate in the following modes: Open-loop V/Hz AC drive. Open-loop Vector AC drive. Open-loop Rotor Flux Control (RFC). Closed-loop Vector AC drive. Servo for synchronous permanent magnet motors / brushless servo motors. The drives are easy to install and... [See More]
- Servo Feedback: Resolver; Incremental Encoder; Absolute Encoder; Analog Position; Sine / Cosine
- Axes: 1.0
- Product: Speed Controller; Regenerative
- Motor / System: Induction; Sensorless Vector; Vector Feedback
from Aerotech, Inc.
Design Features. Complete motion capabilities include: point-to-point; linear, circular, helical and spherical interpolation; velocity profiling; electronic gearing; on-the-fly trajectory modification; high speed I/O; camming. 1 to 32 axes of scalable, synchronized motion. Utilizes the power of the... [See More]
- Servo Feedback: Resolver; Incremental Encoder; Absolute Encoder
- PC-Based Bus: Other
- Product: PC-Based
- Axes: 32.0
from Nidec Control Techniques
Unidrive SP drives can be configured to operate in the following modes: Open-loop V/Hz AC drive. Open-loop Vector AC drive. Open-loop Rotor Flux Control (RFC). Closed-loop Vector AC drive. Servo for synchronous permanent magnet motors / brushless servo motors. The drives are easy to install and... [See More]
- Servo Feedback: Resolver; Incremental Encoder; Absolute Encoder; Analog Position; Sine / Cosine
- Axes: 1.0
- Product: Speed Controller; Regenerative
- Motor / System: Induction; Sensorless Vector; Vector Feedback
from Aerotech, Inc.
Design Features. Positioning control for brushless, DC brush-type or stepping motors. Available in models up to 150 A peak current. Ethernet, USB or RS-232 connectivity. Digital current loop. Integral shunt resistor network or optional external shunt. Optional encoder multiplier (opto x1000). CE... [See More]
- Servo Feedback: Incremental Encoder; Absolute Encoder; Other; Dynamic Trajectory Correction
- Resolution: 16
- Product: PC-Based
- PC-Based Bus: Other; Ethernet/IP, Modbus TCP
from Nidec Control Techniques
Unidrive SP drives can be configured to operate in the following modes: Open-loop V/Hz AC drive. Open-loop Vector AC drive. Open-loop Rotor Flux Control (RFC). Closed-loop Vector AC drive. Servo for synchronous permanent magnet motors / brushless servo motors. The drives are easy to install and... [See More]
- Servo Feedback: Resolver; Incremental Encoder; Absolute Encoder; Analog Position; Sine / Cosine
- Axes: 1.0
- Product: Speed Controller; Regenerative
- Motor / System: Induction; Sensorless Vector; Vector Feedback
from Nidec Control Techniques
Unidrive SP drives can be configured to operate in the following modes: Open-loop V/Hz AC drive. Open-loop Vector AC drive. Open-loop Rotor Flux Control (RFC). Closed-loop Vector AC drive. Servo for synchronous permanent magnet motors / brushless servo motors. The drives are easy to install and... [See More]
- Servo Feedback: Resolver; Incremental Encoder; Absolute Encoder; Analog Position; Sine / Cosine
- Axes: 1.0
- Product: Speed Controller; Regenerative
- Motor / System: Induction; Sensorless Vector; Vector Feedback
from Nidec Control Techniques
Unidrive SP drives can be configured to operate in the following modes: Open-loop V/Hz AC drive. Open-loop Vector AC drive. Open-loop Rotor Flux Control (RFC). Closed-loop Vector AC drive. Servo for synchronous permanent magnet motors / brushless servo motors. The drives are easy to install and... [See More]
- Servo Feedback: Resolver; Incremental Encoder; Absolute Encoder; Analog Position; Sine / Cosine
- Axes: 1.0
- Product: Speed Controller; Regenerative
- Motor / System: Induction; Sensorless Vector; Vector Feedback