White / Low Melting (UNS L) Metal Rod and Bar Stock
from MarsMetal
Mars Metal Company, Specialty Casting Division is your supplier for extruded lead pipe and bar products. The extrusion process provides a very accurate shape that is very dense. The pressures necessary for extruding pipes or shapes ensures very little porosity in the lead and it provides a very... [See More]
- Type: LowMelting; Lead
- Applications: BuildingConstruction
- Shape / Form: Bar Stock (optional feature); Hollow Stock (Tube, Pipe, Column) (optional feature); Round Bar or Rod Stock
- Processing, Temper & Finish: Continuous, Centrifugal or Other Casting Process
from MarsMetal
Our MarShield division manufactures straight, interlocking, and corner lead bricks, commonly used for radiation shielding or ballast weight. Bricks are available in a wide range of sizes, thicknesses and shapes to suit your application. [See More]
- Type: LowMelting; Lead
- Applications: BuildingConstruction
- Shape / Form: Bar Stock; Squares
- Processing, Temper & Finish: Continuous, Centrifugal or Other Casting Process
from Belmont Metals, Inc.
Low Melting (Fusible) Alloys. Featuring 158 °F, 203 °F radiation shielding alloys, pipe bending alloys, and low temperature solders. Eutectic: melting points from 117 ° – 281 °F.Non-eutectic: melting points from 107 ° – 338 °F.Mellottes metal, Rose metal, Wood... [See More]
- Type: LowMelting
- UTS: 8000
- Shape / Form: Bar Stock (optional feature)
- Nonferrous: Bismuth
from Umicore Metal Deposition Solutions
Coating material. Indium. Purity. 99.999%. Form. Rod. Dimensions. Ø 8 x 15 mm. Quantity. 500 g. Theoretical density at 20 °C in g/cm ³. 7.3. Melting point in °C. 157. 10 ⁻ ² mbar in °C. 920. 10 ⁻ ¹ mbar in °C. 1050. Boiling point in °C. 2072. [See More]
- Type: LowMelting
- Width / OD: 0.3150
- Shape / Form: Bar Stock; Round Bar or Rod Stock
- Length: 0.5906
from Indium Corporation
Fusible Alloys include a group of binary, ternary, quaternary, and quinary alloys containing Bismuth, lead, tin, cadmium and indium. The term fusible alloy refers to any of the more than 100 white-metal alloys that melt at relatively low temperatures. Fusible alloys are materials that melt at less... [See More]
- Type: LowMelting; Lead; Tin; Miscellaneous Nonferrous Metal or Alloy; Cadmuim
- UTS: 5400
- Shape / Form: Bar Stock
- Applications: Sealing in Cryogenic Applications, Soldering/Fusing
from Indium Corporation
Fusible Alloys include a group of binary, ternary, quaternary, and quinary alloys containing Bismuth, lead, tin, cadmium and indium. The term fusible alloy refers to any of the more than 100 white-metal alloys that melt at relatively low temperatures. Fusible alloys are materials that melt at less... [See More]
- Type: LowMelting; Lead; Tin
- Thickness: 1
- Shape / Form: Bar Stock
- Length: 4.25
from Indium Corporation
Typical Indium Analysis. 99.99%. PPMWT. Fe : 1-2. Ni : 2-6. Cu : 2-6. Cd : 5-10. Pb : 10-30. Sn : 10-25. Ti : 1-4. Analysis by OES. * Please note that these are typical ppm levels, and do not represent maximum, minimum, or lot specific levels. If you have specific requirements for one or two... [See More]
- Type: LowMelting
- Thickness: 0.5000
- Shape / Form: Bar Stock
- Length: 11.75
from Indium Corporation
We produce 6N material with impurities held to less than 100 ppb/weight as analyzed by OES. 6N (and often 5N) indium is selected when the user's application offers enough flexibility to allow the balancing of device performance with material cost. [See More]
- Type: LowMelting
- Thickness: 0.7500
- Shape / Form: Bar Stock
- Width / OD: 1.25
from Indium Corporation
We produce 6N material with impurities held to less than 100 ppb/weight as analyzed by OES. 6N (and often 5N) indium is selected when the user's application offers enough flexibility to allow the balancing of device performance with material cost. Shipped quantities will be adjusted to best fit the... [See More]
- Type: LowMelting
- Thickness: 0.5000
- Shape / Form: Bar Stock
- Width / OD: 1.25
from Indium Corporation
This purity is especially suited for the production of single crystal III-V compound semiconductors, such as indium Phosphide used as substrates for fabrication of integrated circuits or discrete devices such as laser diodes and photo detectors. Certification of 6N5 purity is by OES (optical... [See More]
- Type: LowMelting
- Thickness: 0.7500
- Shape / Form: Bar Stock
- Width / OD: 1.25