Flats / Rectangular Bar Metal Rod and Bar Stock
from High Performance Alloys, Inc.
Wear Resistant (Co-Cr-W). Cobalt 6B is a cobalt based chromium, tungsten alloy for wear environments where seizing, galling and abrasion are present. 6B is resistant to seizing and galling and with its low coefficient of friction, allows sliding contact with other metals without damage by metal pick... [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar; Round Bar or Rod Stock
- Specifications: AMS; UNS
- Type: Cobalt; Alloy; Miscellaneous Nonferrous Metal or Alloy
- UTS: 130000
from RS Components, Ltd.
6082T6 Aluminium Flat Bar, 25mmx12mmx1m [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Specifications: 6082-T6
- Type: Aluminum
- Width / OD: 0.9843
from High Performance Alloys, Inc.
Inconel 718 is a Gamma Prime strengthened alloy with excellent mechanical properties at elevated temperatures, as well as cryogenic temperatures. Suitable for temperatures up to around 1300 F. Can be readily worked and age hardened. Excellent strength from -423 degrees F to 1300 degrees F (-253... [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar; Round Bar or Rod Stock
- Specifications: AMS; ASTM / ASME; UNS
- Type: Nickel; Alloy; Miscellaneous Nonferrous Metal or Alloy
- UTS: 185000
from RS Components, Ltd.
6082T6 Aluminium Flat Bar, 30mmx6mmx1m [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Specifications: 6082-T6
- Type: Aluminum
- Width / OD: 1.18
from High Performance Alloys, Inc.
Nitronic 60 is truly an all purpose metal. This fully austenitic alloy was originally designed as a temperature alloy, and subsequently has good high temperature properties for temperatures around 1800 ºF. The oxidation resistance of Nitronic 60 is similar to Type 309 S.S., and far superior to... [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar; Round Bar or Rod Stock; Squares
- Specifications: AMS; ASTM / ASME; UNS
- Type: Stainless; Alloy
- UTS: 95000 to 105000
from RS Components, Ltd.
6082T6 Aluminium Flat Bar, 50mmx6mmx1m [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Specifications: 6082-T6
- Type: Aluminum
- Width / OD: 1.97
from RS Components, Ltd.
6082T6 Aluminium Flat Bar, 50mmx12mmx1m [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Specifications: 6082-T6
- Type: Aluminum
- Width / OD: 1.97
from RS Components, Ltd.
6082T6 Aluminium flat, 20mmx3mmx1m, 10pk [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Specifications: 6082-T6
- Type: Aluminum
- Width / OD: 0.7874
from RS Components, Ltd.
6082T6 Aluminium flat, 20mmx5mmx1m, 5pk [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Specifications: 6082-T6
- Type: Aluminum
- Width / OD: 0.7874
from RS Components, Ltd.
6082T6 Aluminium flat, 25mmx3mmx1m,10 pk [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Specifications: 6082-T6
- Type: Aluminum
- Width / OD: 0.9843
from RS Components, Ltd.
6082T6 Aluminium flat, 30mmx10mmx1m, 5pk [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Specifications: 6082-T6
- Type: Aluminum
- Width / OD: 1.18
from RS Components, Ltd.
6082T6 Aluminium flat, 40mmx3mmx1m, 5pk [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Specifications: 6082-T6
- Type: Aluminum
- Width / OD: 1.57
from RS Components, Ltd.
6082T6 Aluminium flat, 40mmx5mmx1m, 5pk [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Specifications: 6082-T6
- Type: Aluminum
- Width / OD: 1.57
from RS Components, Ltd.
6082T6 Aluminium flat, 60mmx6mmx1m, 2pk [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Specifications: 6082-T6
- Type: Aluminum
- Width / OD: 2.36
from RS Components, Ltd.
6082T6 Aluminium flat, 60mmx12mmx1m, 2pk [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Specifications: 6082-T6
- Type: Aluminum
- Width / OD: 2.36
from RS Components, Ltd.
HE9TF Al bar stock,24in L 1 1/2x1/8in [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Specifications: HE9TF
- Type: Aluminum
- Width / OD: 1.25
from RS Components, Ltd.
VIKING BARRES CUIVRE SECT 15X4 [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Width / OD: 0.1575
- Type: Copper
- Length: 38.98
from RS Components, Ltd.
8X12MM KEYSTEEL 12" LENGTH 6PCS [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Width / OD: 0.4724
- Type: CarbonSteel
- Length: 11.81
from RS Components, Ltd.
11X18MM KEYSTEEL 12" LENGTH 4PCS [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Width / OD: 0.7087
- Type: CarbonSteel
- Length: 11.81
from RS Components, Ltd.
3/4" X 3/4" KEYSTEEL 12" LENGTH 4PCS [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Width / OD: 0.7500
- Type: CarbonSteel
- Length: 12
from RS Components, Ltd.
12X20MM KEYSTEEL 12" LENGTH 4PCS [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Width / OD: 0.7874
- Type: CarbonSteel
- Length: 11.81
from RS Components, Ltd.
1/4" X 1/4" KEYSTEEL 12" LENGTH 6PCS [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Width / OD: 0.2500
- Type: CarbonSteel
- Length: 12
from RS Components, Ltd.
7/16" X 7/16" KEYSTEEL 12" LENGTH 4PCS [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Width / OD: 0.4375
- Type: CarbonSteel
- Length: 12
from RS Components, Ltd.
ASSORTED KEYSTEEL - IMPERIAL [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Type: CarbonSteel
from RS Components, Ltd.
9X14MM KEYSTEEL 12" LENGTH 6PCS [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Width / OD: 0.5512
- Type: CarbonSteel
- Length: 11.81
from RS Components, Ltd.
3/8" X 3/8" KEYSTEEL 12" LENGTH 6PCS [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Width / OD: 0.3750
- Type: CarbonSteel
- Length: 12
from RS Components, Ltd.
5/8" X 5/8" KEYSTEEL 12" LENGTH 4PCS [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Width / OD: 0.6250
- Type: CarbonSteel
- Length: 12
from RS Components, Ltd.
10X12MM KEYSTEEL 12" LENGTH 4PCS [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Width / OD: 0.4724
- Type: CarbonSteel
- Length: 11.81
from Elmet Technologies LLC
Material from .090 inches to 3 inches in thickness is classified as molybdenum plate. It is widely used in the construction of furnace tooling and parts and as a feed stock for the fabrication of parts for the electronics and semiconductor industries. Standard availability is described below. Other... [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Thickness: 1.00E-3
- Type: Molybdenum; Refractory / Reactive
- Width / OD: 12
from Umicore Metal Deposition Solutions
Coating material. Nickel. Purity. 99.95%. Form. Tile. Dimensions. 3 x 10 x 10 mm. Quantity. 100 pcs. HazardPictogram. GHS07. Statement. Danger. Theoretical density at 20 °C in g/cm ³. 8.9. Melting point in °C. 1455. 10 ⁻ ² mbar in °C. 1510. 10 ⁻ ¹ mbar in... [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Thickness: 0.3937
- Type: Nickel
- Width / OD: 0.1181
from Reid Supply
6061-T6511 extruded is the most versatile of the heat treatable aluminum alloys. It has most of the good qualities of aluminum, and it offers a wide range of mechanical properties and corrosion resistance. It can be fabricated by many of the commonly used techniques. Length tolerances are ±1". [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Thickness: 0.2500
- Type: Aluminum; Aluminum
- Width / OD: 12
from Ed Fagan, Inc.
A soft magnetic alloy, consisting of 49% Nickel, balance Iron used where high initial permeability, maximum permeability, and low core loss is needed. [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- UNS Number: 94840
- Type: Alloy; Miscellaneous Ferrous Alloy
- Specifications: AMS; ASTM / ASME; UNS; A753, N-14411C
from Kloeckner Metals Corporation
Standard Lengths 12' [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Applications: Automotive or Vehicular; BuildingConstruction; Mining
- Specifications: AISI
from Concast Metal Products Co.
Aluminum bronze is the highest strength standard copper based alloy. Concast produces C95400, C95500 and C95900 in standard sizes of rounds, tubes and rectangles. Aluminum in conjunction with iron and nickel in C95500 acts as a strengthener in these alloys. All of the aluminum bronzes can be heat... [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar; Hex; Hollow Stock (Tube, Pipe, Column) (optional feature); Squares
- Specifications: ICI, ASTM, or Other Casting Grade; ASTM / ASME; CDA; MIL-SPEC / QQS; SAE
- Type: Copper; Alloy
- Width / OD: 1 to 15
from Roda Specialty Steel
Grade: 304/L HRAP [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Width / OD: 0.2500 to 0.7500
- Type: Stainless
- Features: Austenitic
from G.L. Huyett
Ground flat stock is made from general purpose tool steel containing manganese to make it nondeforming and non-shrinking. It ’s used in toolrooms for tools, dyes, punches, templates, stripper plates, and in tight tolerance keyways. [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Specifications: ASTM / ASME
- Type: AlloySteel; Stainless; ToolSteel
- Thickness: 0.0156 to 2
from National Bronze & Metals Inc.
C17200 Beryllium Copper ASTM B196, AMS 4533, RWMA CLASS IV. Most commonly utilized beryllium copper alloy and is notable for exhibiting the highest strength and hardness compared to commercial copper alloys. Its strength and hardness is similar to that of steel. C17200 ultimate tensile and Rockwell... [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar; Hollow Stock (Tube, Pipe, Column) (optional feature); Round Bar or Rod Stock
- UNS Number: 17200
- Type: Copper; Pure, Unalloyed or Very Low Alloy Additions
- Specifications: AMS; ASTM / ASME; CDA; MIL-SPEC / QQS; SAE; UNS; ASTM B-196, AMS4533, RWMA CLASS IV
from Hoover Steel, Inc.
Flat, Round & Square. Type 6061-T52 = 12 FT. Type 6063-T52 = 16 FT. Other Aluminum Items Available Upon Request: • Coiled Wire. • Expanded Metal. • Handrail. • Hexagonal Bar. • I Beams. • Tee Bar. • Wide Flange Beams. • Zee Bar [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Applications: BuildingConstruction
- Type: Aluminum
from Princess Auto Limited
1 " x 1/8 " Aluminum Flat Bar [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Length: 96
- Type: Aluminum
- Processing, Temper & Finish: Clear Satin Anodized
from Materion Corporation
Materion Microelectronics and Services 1000oz bars consistently meet industry standards for purity based on guidelines published by COMEX. Custom imprints are available using customers ’ proprietary designs. Materion Microlectronics and Services' most popular investment grade product, the... [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Applications: Electronics or semiconductors; Investment Grade
- Type: PreciousNoble; Silver
from Nucor Cold Finish Group
The Nucor Cold Finish Group is your comprehensive source for quality cold finish bars. When taken as a whole, our production plants offer a huge range of products, from the smallest diameter wire products, to sizes up to six inches in diameter. A variety of processes, capabilities, grades and alloys... [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Specifications: AISI; 1018, Other Grades Available
- Type: CarbonSteel (optional feature); AlloySteel (optional feature)
- Applications: Bearings or Bearing Quality (optional feature)
from Reid Supply
6061-T6511 extruded is the most versatile of the heat treatable aluminum alloys. It has most of the good qualities of aluminum, and it offers a wide range of mechanical properties and corrosion resistance. It can be fabricated by many of the commonly used techniques. Length tolerances are ±1". [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Thickness: 0.1250
- Type: Aluminum; Aluminum
- Width / OD: 1
from Ed Fagan, Inc.
A soft magnetic alloy consisting of 80% Nickel, 5% Molybdenum, and balance Iron used where extremely high initial & maximum permeability and minimum hysteresis is needed. [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- UNS Number: 14080
- Type: Alloy; Miscellaneous Ferrous Alloy
- Specifications: AMS; ASTM / ASME; UNS; A753, N-14411C
from Hoover Steel, Inc.
Stock Length: 20 FT Inquire for Abraison Resistant (AR) Flats [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Applications: BuildingConstruction
- Type: CarbonSteel
from Princess Auto Limited
1-1/2 " x 1/8 " Aluminum Flat Bar [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Length: 96
- Type: Aluminum
- Processing, Temper & Finish: Clear Satin Anodized
from Reid Supply
Made of dimensionally stable chromium, tungsten and vanadium electric furnace tool steel. Low 1,450-1,500 Fahrenheit hardening range makes this steel easy to harden. Vanadium content assures fine grain and high durability. Fully spheroidized and annealed for uniform carbide size and easy machining. [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Thickness: 0.0630
- Type: ToolSteel; General Purpose Tool Steel
- Width / OD: 2
from Ed Fagan, Inc.
Tungsten Alloys, which contain elements such as nickel, copper and iron, produce a host of alloys which have engineering properties similar to steel, are relatively easy to machine, and can be plated or painted to enhance their corrosion protection. These alloys are approximately 50% denser than... [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Specifications: ASTM / ASME; ASTM B 777-07
- Type: Refractory / Reactive; Tungsten; Pure, Unalloyed or Very Low Alloy Additions
- Applications: Aerospace or Aircraft Quality; Automotive or Vehicular
from Hoover Steel, Inc.
Galvanized Slotted Flat Landscape edging and guard rail available. Inquire for types and sizes. Inquire for other sizes and lengths. Bundle size: 10 pcs. [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Applications: BuildingConstruction
- Type: CarbonSteel
- Processing, Temper & Finish: Galvanized
from Princess Auto Limited
1/2 " x 1/8 " Aluminum Flat Bar [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Thickness: 0.1250
- Type: Aluminum
- Length: 96
from Reid Supply
Made of dimensionally stable chromium, tungsten and vanadium electric furnace tool steel. Low 1,450-1,500 Fahrenheit hardening range makes this steel easy to harden. Vanadium content assures fine grain and high durability. Fully spheroidized and annealed for uniform carbide size and easy machining. [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Thickness: 0.0630
- Type: ToolSteel; General Purpose Tool Steel
- Width / OD: 0.5000
from Princess Auto Limited
1/8 " x 1 " Cold Finished (Rolled) Flat [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Width / OD: 1
- Thickness: 0.1250
- Length: 60
from Princess Auto Limited
3/16 " x 1-1/2 " Cold Finished (Rolled) Flat [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Width / OD: 1.5
- Thickness: 0.1875
- Length: 60
from Princess Auto Limited
3/4 " x 1/8 " Aluminum Flat Bar [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Length: 96
- Type: Aluminum
- Processing, Temper & Finish: Satin Anodized