Rack Mount Signal Conditioners
from AMETEK Programmable Power
16-Channel isolated high voltage measurement instrument. 24-bit SAR ADC per Channel. 128k samples/second/channel sample rate. 1000V channel-channel isolation. 500V channel-ground isolation. Input voltage ranges peak: ±420V/ ±10V/ ±1V. Data logger acquisition mode. 3-Pin screw... [See More]
- Form Factor: Rack Mount
- Analog Channels: 16
- Signal Conditioning: SigIsol
- DC Voltage: 12-50 V
from Dataforth Corporation
The SCMPB01 16-channel backpanel (Figure 1) can accept any of the SCM5B analog modules in any mixture. It can be mounted on the SCMXRK-002 19-inch metal rack. The SCMPB01 has 16 non-addressable analog I/O signal channels which provides each module with it ’s own analog bus. The module output... [See More]
- Form Factor: DIN Rail; Rack Mount
- Inputs: Thermocouple Input
- Analog Channels: 1
- Outputs: Analog Current Output
from Dataforth Corporation
The SCMPB01 16-channel backpanel (Figure 1) can accept any of the SCM5B analog modules in any mixture. It can be mounted on the SCMXRK-002 19-inch metal rack. The SCMPB01 has 16 non-addressable analog I/O signal channels which provides each module with it ’s own analog bus. The module output... [See More]
- Form Factor: DIN Rail; Rack Mount
- Inputs: Thermocouple Input
- Analog Channels: 1
- Outputs: Analog Current Output
from Dataforth Corporation
The SCMPB01 16-channel backpanel (Figure 1) can accept any of the SCM5B analog modules in any mixture. It can be mounted on the SCMXRK-002 19-inch metal rack. The SCMPB01 has 16 non-addressable analog I/O signal channels which provides each module with it ’s own analog bus. The module output... [See More]
- Form Factor: DIN Rail; Rack Mount
- Inputs: Thermocouple Input
- Analog Channels: 1
- Outputs: Analog Current Output
from Dataforth Corporation
Each SCM5B30 and SCM5B31 voltage input module provides a single channel of analog input which is filtered, isolated, amplified, and converted to a high-level analog voltage output (Figure 1). This voltage output is logic-switch controlled, allowing these modules to share a common analog bus without... [See More]
- Form Factor: DIN Rail; Rack Mount
- Analog Channels: 1
- Signal Conditioning: Filter; Instrumentation Amplifier; SigIsol
- Differential Channels: Yes
from Dataforth Corporation
Each SCM7B21/30/31 voltage input module accepts one channel of analog voltage input which is filtered, isolated, amplified, and converted to a high-level analog voltage for output to the process control system. These modules incorporate a five-pole filtering approach to maximize both time and... [See More]
- Form Factor: DIN Rail; Rack Mount
- Analog Channels: 1
- Signal Conditioning: Filter; Instrumentation Amplifier; SigIsol
- Differential Channels: Yes
from Dataforth Corporation
SCMD digital input modules provide highly reliable and safe interfaces to harsh industrial measurement and control applications. With SCMD modules installed near individual field signals, a reliable isolation barrier is provided between the field wiring computer system. Other benefits include... [See More]
- Form Factor: Rack Mount
- Digital I/O Channels: 1
- Signal Conditioning: Filter; SigIsol
- DC Voltage: 3.3 to 60V
from MTI Instruments Inc.
The state of the art speed resolver/signal conditioning unit capable of working with all types of engine speed signals. Whether you are testing engines with a long tooth or short tooth embedded N1 signal, if you have engines with older high-voltage tachometer generators, or if you are testing... [See More]
- Form Factor: Rack Mount
- Outputs: Analog Voltage Output
- Inputs: Tachometer
- User Interface: None
from NorPix, Inc.
StreamPix is Norpix ’s flag ship software product. Resulting from more than 10 years of interaction with our vast group of customers, StreamPix has become the ultimate Digital Video Recording software. It offers a state of the art user interface, and an enormous amount of usage flexibility for... [See More]
- Form Factor: Panel / Chassis Mount; Rack Mount; Stand-alone
- Analog Channels: 32
- Signal Conditioning: Filter
- Differential Channels: Yes
from Piezosystem Jena, Inc.
Many applications in optical measurement systems, or data communication networks, require distribution and modulation of light, guided in optical fibers. The FSM-1by1 series (1 input and 1 output channel) and FSM-1by2 series (1 input and 2 output channels) multimode optical fiber switches were... [See More]
- Form Factor: Rack Mount
- DC Voltage: 5V
- Digital I/O Channels: 1
- User Interface: Front Panel; Computer Programmable
from Elsys AG
The device EL_BULT14 is able to produce TTL trigger pulses out of analog signals from optival (Laser), reluctance or capacitive and eddy-current sensors. Each of the 14 channels has a corresponding input (Probe In) and trigger pulse out (Pulse Out) BNC connector on the rear side of the device. The... [See More]
- Form Factor: Rack Mount
- DC Voltage: +/-42V
- Analog Channels: 14
- Frequency: 0-400kHz
from Encore Electronics, Inc.
The Model 149 is an economical two-channel-per-module charge amplifier that plugs into Encore's 19" GPSC instrumentation rack, which accommodates up to eight modules (16 channels). An AC power supply is built into the rack, and provides the required unregulated DC voltages to operate the modules. A... [See More]
- Form Factor: Rack Mount
- Outputs: Analog Voltage Output
- Inputs: Charge Input
- User Interface: Front Panel
from PCB Piezotronics, Inc.
SIGNAL CONDITIONER. Powers ICP and in-line charge converters requireing constant current excitation. Preconfigured with the following options: 080, 035, 101, 103, and 102. See specification for details. [See More]
- Form Factor: Rack Mount
from Piezosystem Jena, Inc.
Many applications in optical measurement systems, or data communication networks, require distribution and modulation of light, guided in optical fibers. The FSM-1x3, FSM-1x4, FSM-1x6 and FSM-1x9 series multimode optical fiber switches were developed mainly for applications in the field of... [See More]
- Form Factor: Rack Mount
- DC Voltage: 5V
- Digital I/O Channels: 1
- User Interface: Front Panel; Computer Programmable
from Elsys AG
The device EL-TRIG_R is able to produce TTL-Trigger-Pulses out of analog signals from reluctance or capacitive and eddy-current sensors. Key Capabilities. Gain factors 1, 10, 100 or automatic. Trigger on negative or positive slopes. Trigger on negative or positive levels. Bandwith 30 to 30 kHz. Max... [See More]
- Form Factor: Rack Mount
- DC Voltage: +/-35V
- Analog Channels: 14
- Frequency: 30Hz-35kHz
from Encore Electronics, Inc.
Fast response. High accuracy. Input isolation to 1000 V. Digital and analog outputs. Description. The Model 225 digital frequency to voltage converter (shown right) can be configured in a seven module rack (shown below) or two module carry case. A power supply module provides the required... [See More]
- Form Factor: Rack Mount
- Outputs: Analog Voltage Output
- AC Voltage: .025V to 100V Peak
- User Interface: Front Panel
from PCB Piezotronics, Inc.
16-channel, line-powered, ICP ® sensor signal cond., unity gain, (16) BNC input/output conn. Powers ICP sensors and in-line charge converters requireing constant current excitation. Preconfigured with the 080 option. See specification for details. [See More]
- Form Factor: Rack Mount
from Piezosystem Jena, Inc.
Customized fiber optic switches are an important part of the product range offered by piezosystem jena. Individually manufactured, the optical switches are designed and developed in close collaboration with the end user. The customer receives a custom tailored solution which guarantees the best... [See More]
- Form Factor: Rack Mount
- DC Voltage: 5V
- Digital I/O Channels: 4
- User Interface: Front Panel; Computer Programmable
from Encore Electronics, Inc.
The Model 619M is a low cost differential amplifier useful in test environments where high CMRR is desired. Encore's Model 227. F/V converter can also be used in the six-module 4015-111 rack. An. AC power supply is built into the rack, and provides the required unregulated DC voltages to operate the... [See More]
- Form Factor: Rack Mount
- DC Voltage: +/- 10 V Max
- Signal Conditioning: Instrumentation Amplifier
- User Interface: Front Panel
from PCB Piezotronics, Inc.
8-channel, line-powered, ICP ® sensor signal cond. (base model - requires options). Powers ICP ® sensors and in-line charge converters requireing constant current excitation. Can be configured with many options including gain, filtering, switched outputs, integration, rms conversion,... [See More]
- Form Factor: Rack Mount
from Encore Electronics, Inc.
The Model 5020-102 rack adapter offers complete remote control of all signal conditioner settings through an industry-standard Ethernet interface and remote web browser. No additional software needs to be installed to operate the system. In addition, the rack can be controlled by other software... [See More]
- Form Factor: Rack Mount
- Inputs: Accelerometer Input (optional feature); Bridge Input
- Signal Conditioning: Instrumentation Amplifier
- User Interface: Computer Programmable
from PCB Piezotronics, Inc.
8-channel, line-powered, ICP ® sensor signal cond., unity gain, BNC input/output conn., rack mount [See More]
- Form Factor: Rack Mount
- Operating Temperature: 32 to 122
- Outputs: Analog Voltage Output
from Encore Electronics, Inc.
The Model 663 is a combination amplifier and integrator for accelerometer signals. One integration stage is provided, converting acceleration into velocity. The unity gain frequency of the integrator is factor-trimmed to 60Hz. Two outputs are provided per accelerometer –a buffered copy of the... [See More]
- Form Factor: Rack Mount
- DC Voltage: 0 To +/- 10 V Max
- Signal Conditioning: Instrumentation Amplifier
- Outputs: Analog Voltage Output
from PCB Piezotronics, Inc.
SIGNAL CONDITIONER [See More]
- Form Factor: Rack Mount
from Encore Electronics, Inc.
The Model 610 strain gage amplifier exhibits the performance characteristics and controls derived from 20 years of customer-oriented experience. It features very low output noise, broadband response and many other conveniences, all combined in one moderately priced module. [See More]
- Form Factor: Rack Mount
- Inputs: Bridge Input
- Signal Conditioning: Bridge Conditioner; Instrumentation Amplifier
- Excitation: Voltage; Current