Printed Circuit Board (PCB) Signal Conditioners
from Electro Optical Components, Inc.
PAb preamplifier is oriented for amplification and conversion of the pulse current signal generated by LMSNT photodiodes (PDs). Preamplifier enables PD operation at photovoltaic mode (with no reverse bias) – mode in which photodiode becomes the source of photocurrent. PD photocurrent is... [See More]
- Form Factor: PC Board
- Inputs: Photodiode
- Signal Conditioning: Instrumentation Amplifier
- Outputs: Analog Voltage Output
from Dataforth Corporation
The 8B isoLynx ® SLX300 - Dataforth's newly introduced data acquisition system - builds on the proven reliability and outstanding performance of the SCM5B isoLynx ® SLX200 and the miniature-sized SensorLex ® 8B isolated signal conditioning modules to provide a compact, low cost solution... [See More]
- Form Factor: PC Board; Panel / Chassis Mount (optional feature); DIN Rail (optional feature)
- Analog Channels: 12
- Signal Conditioning: SigIsol
- Digital I/O Channels: 8
from Dexter Research Center, Inc.
Features: Available in three amplifier gains: 300, 500 and 1,000, this PCB includes a LM20 temperature sensor and 1.25V voltage reference. Although sized for single channel TO-5 packages, this amplifier is electrically compatible with all Dexter Research Center detectors, providing convenient... [See More]
- Form Factor: PC Board
- Analog Channels: 1
- Signal Conditioning: Instrumentation Amplifier
- DC Voltage: 2.7-5.5 Volts
from RS Components, Ltd.
ADuM1401A quad 90Mbps 3/1 bus isolator [See More]
- Form Factor: PC Board
- Analog Channels: 4
- Signal Conditioning: SigIsol
- DC Current: 10 μA
from Electro Optical Components, Inc.
Single and Dual Phase 19" Boards. Working Frequency 5 Hz up to 120 kHz. Phase Shifter 0 ... 360 °. Current and Voltage Input. Parameter Control by Local Switches and Opto-Isolated Digital Inputs. The high prices for usual desktop lock-in-amplifiers often impede their use in cost sensitive... [See More]
- Form Factor: PC Board
- Outputs: Analog Voltage Output
- Signal Conditioning: Instrumentation Amplifier
- User Interface: None
from RS Components, Ltd.
Digital Isolator Rail 8-Pin SOIC [See More]
- Form Factor: PC Board
- Analog Channels: 1
- Signal Conditioning: SigIsol
- Agency Approval: RoHS Compliant
from RS Components, Ltd.
High Speed Digital Isolator 8-Pin SOIC [See More]
- Form Factor: PC Board
- Analog Channels: 1
- Signal Conditioning: SigIsol
- DC Current: 10 μA
from RS Components, Ltd.
Quad Digital Isolator 25Mbps 16P SOIC [See More]
- Form Factor: PC Board
- Analog Channels: 2
- Signal Conditioning: SigIsol
- DC Current: 10 μA
from RS Components, Ltd.
2Ch 2/0, 150Mbps Dig Isolator ISO7220M [See More]
- Form Factor: PC Board
- Analog Channels: 2
- Signal Conditioning: SigIsol
- Agency Approval: RoHS Compliant
from RS Components, Ltd.
Quad Digital Isolator 5.7kV 3-1 SOIC16 [See More]
- Form Factor: PC Board
- Analog Channels: 4
- Signal Conditioning: SigIsol
- DC Current: 1.7 mA
from RS Components, Ltd.
Dig Isolator CMOS 4-ch 150Mbps SOICW16 [See More]
- Form Factor: PC Board
- Analog Channels: 4
- Signal Conditioning: SigIsol
- DC Current: 14.9 mA
from RS Components, Ltd.
5-Ch Digital Isolator (4+1),IL261-3E [See More]
- Form Factor: PC Board
- Analog Channels: 5
- Signal Conditioning: SigIsol
- DC Current: 10 μA
from RS Components, Ltd.
Dual Ch Digital Isolator,IL711-1E [See More]
- Form Factor: PC Board
- Analog Channels: 2
- Signal Conditioning: SigIsol
- DC Current: 10 μA
from RS Components, Ltd.
Analog Devices, ADUM3070ARQZ [See More]
- Form Factor: PC Board
- Agency Approval: RoHS Compliant
- Signal Conditioning: SigIsol
- Operating Temperature: -40 to 221
from RS Components, Ltd.
Dig Isolator CMOS 4-ch 150Mbps SOICW16 [See More]
- Form Factor: PC Board
- Analog Channels: 4
- Signal Conditioning: SigIsol
- DC Current: 14.9 mA
from RS Components, Ltd.
2Ch 1/1, 150Mbps Dig Isolator ISO7221M [See More]
- Form Factor: PC Board
- Analog Channels: 2
- Signal Conditioning: SigIsol
- Agency Approval: RoHS Compliant
from RS Components, Ltd.
Low-Power Dual Digital Isolator 1M SOIC8 [See More]
- Form Factor: PC Board
- Analog Channels: 2
- Signal Conditioning: SigIsol
- DC Current: 10 μA
from RS Components, Ltd.
Low Power Quad Dig. Isolator 150M SOIC16 [See More]
- Form Factor: PC Board
- Analog Channels: 4
- Signal Conditioning: SigIsol
- DC Current: 10 μA
from RS Components, Ltd.
Low-Power Dual Digital Isolator SOIC8 [See More]
- Form Factor: PC Board
- Analog Channels: 2
- Signal Conditioning: SigIsol
- DC Current: 10 μA
from RS Components, Ltd.
Isolator,digital,1Mbps,2.5kVrms,SOIC8N [See More]
- Form Factor: PC Board
- Analog Channels: 2
- Signal Conditioning: SigIsol
- DC Current: 4.5 mA
from RS Components, Ltd.
Isolator,digital,1Mbps,2.5kVrms,SOIC8N [See More]
- Form Factor: PC Board
- Analog Channels: 2
- Signal Conditioning: SigIsol
- DC Current: 3.5 mA
from RS Components, Ltd.
Isolator,digital,150Mbps,2.5kVrms,SOIC8N [See More]
- Form Factor: PC Board
- Analog Channels: 2
- Signal Conditioning: SigIsol
- DC Current: 3.5 mA
from RS Components, Ltd.
Isolator,digital,150Mbps,2.5kVrms,SOIC8N [See More]
- Form Factor: PC Board
- Analog Channels: 2
- Signal Conditioning: SigIsol
- DC Current: 4.5 mA
from RS Components, Ltd.
Isolator,digital,1Mbps,2.5kV,SOIC16W [See More]
- Form Factor: PC Board
- Analog Channels: 3
- Signal Conditioning: SigIsol
- DC Current: 5.6 mA
from ACCES I/O Products, Inc.
Features. Supports mixed Sensors: Thermocouples, RTDs, strain gages, voltage and current inputs. Multiplexes 16 differential inputs to one analog single-ended output. Cold junction compensation and break detect for thermocouple inputs. Gain programmable (0.5 to 1000) channel-by-channel. Screw... [See More]
- Form Factor: PC Board
- Differential Channels: Yes
- Analog Channels: 16
- Inputs: Thermocouple Input; RTD Input; Bridge Input
from OMEGA Engineering, Inc.
The OME-DB-889D is an expansion multiplexer/amplifier board for use with OME-PCI-1800 series families. Each OME-DB-889D multiplexes 16 differential analog input channels into one analog input of the DAS board. The high grade instrumentation amplifier provides software programmable gains of 0.5 , 1,... [See More]
- Form Factor: PC Board
- Analog Channels: 16
- Signal Conditioning: Filter
- Inputs: Thermocouple Input
from Sensor Platforms, Inc.
A multi sensor system with two popular microcontroller interfaces [See More]
- Form Factor: PC Board
- Digital I/O Channels: 8
- Analog Channels: 8
- Inputs: Accelerometer Input; LVDT; Timer / Clock Input (optional feature); Magnetometer
from Data Device Corporation (DDC)
Description: The RD-19240 is a low cost programmable 10,12 or 14 bit resolution ASIC tracking resolver-to-digital converter. This converter offers off-the-shelf solutions for today's high volume motion feedback applications. This ASIC converter features programmable parameters such as resolution... [See More]
- Form Factor: PC Board
- Digital I/O Channels: 1
- Analog Channels: 1
- DC Voltage: 5 Volts
from Jewell Instruments, LLC
The Model 84828 Basic Signal Conditioner operates one 5-pin biaxial tilt sensor or one uniaxial sensor, plus one LM-35 temperature sensor, which may be installed on the circuit board. Model 84828 has one fixed gain and one RC low-pass filter, both of which can be factory-tuned to meet your... [See More]
- Form Factor: PC Board
- Outputs: Analog Voltage Output
from Interface, Inc. - AZ
Why the Interface series SCB1 Conditioning Board 1 or 2 Channel is the best in class: Nonlinearity <0.003% full scale. 20-bit resolution. High thermal stability. Shunt calibration, software selectable. Single or dual channel versions. Bipolar. Isolated output [See More]
- Form Factor: PC Board
- Inputs: mV/V
- Signal Conditioning: Filter; Instrumentation Amplifier; Sample-and-Hold Amplifier; Isolation Amplifier; SigIsol; Millivolt to Analog Converter
- Excitation: Voltage
from Spectron Glass and Electronics Inc.
The SA40111 Ultra-Dual is a dual axis signal conditioner that delivers high accuracy RS232 (8 bit) and analog (Vdc) outputs. Designed to interface perfectly with Spectrons full line of single and dual axis electrolytic tilt sensors, the SA40111 Ultra-Dual is capable of providing data over widely... [See More]
- Form Factor: PC Board
- Digital I/O Channels: 0
- Analog Channels: 1
- DC Voltage: 3V - 12V
from Piezo-Metrics
Fits inside sensors, 19.5 mm diameter, 7.6 mm height. Outputs of 4-20 mA, 0-10 V, 0-5 V, ±10 V. Non interaction between the trimmers makes calibration fast and easy. High speed 1000 Hz. Robust design, of high noise immunity & reverse polarity protected. 2 wire 4-20 mA load cell option. [See More]
- Form Factor: PC Board
- Excitation: Voltage
- Inputs: Bridge Input
- Agency Approval: European EMC Directive 2004/108/EC
from OTEK Corporation
The SCX is a loop powered signal conditioner. It supplies 5VDC at <3.5mA to the listed (SCV Series) signal conditioners (Digits 4 & 5) without affecting the 4-20mA accuracy. As a stand alone, the SCX accepts a 0-1VDC or 0-1mADC signal. [See More]
- Form Factor: PC Board
- AC Voltage: 0-130VAC
- DC Voltage: 5VDC +/- 10% Power Input
- AC Current: 0-5 Amps
from Red Pitaya, d.o.o.
SDRlab 122-16 External clock is based on the SDRlab 122-16 model that is modified to be used with an external clock oscillator, which is important especially for RF applications that operate at other frequencies, require better quality clock or clock synchronization. [See More]
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Analog Channels: 6
- Signal Conditioning: Filter; Bridge Conditioner (optional feature); Instrumentation Amplifier (optional feature)
- Differential Channels: Yes (optional feature)
from Encore Electronics, Inc.
The Model 176 is a computer-controlled charge amplifier module. It features variable gain and output scaling and will accept differential or single-ended inputs. The following parameters are displayed and adjustable: accelerometer sensitivity, differential or single-ended mode, scaling, filter... [See More]
- Form Factor: PC Board
- Inputs: Bridge Input
- Signal Conditioning: Bridge Conditioner; Instrumentation Amplifier
- Outputs: Analog Current Output
from Electro Standards Laboratories
The CellMite ® board with auto identifying display is an embedded digital signal conditioner that connects directly to a strain gage transducer and simultaneously generates a serial output for direct connection to a PC, a scalable +/-10V analog output for interface to data acquisition systems,... [See More]
- Form Factor: PC Board
- Analog Channels: 1
- Signal Conditioning: Pressure
- Inputs: Bridge Input
from Fredericks Company - Televac
Mini Signal Conditioner Assembly with 0717-4318-99 Dual Axis Sensor and Analog/Digital [See More]
- Form Factor: PC Board
- Outputs: Analog Voltage Output; Analog Current Output; Frequency or Pulse Output
- Inputs: Tilt Sensor
- User Interface: None
from Elsys AG
The Strain Gauge Amplifier SGA-2 is designed as a differential front-end amplifier to connect full, half or ¼ bridge strain gauges with internal bridge completion. While the SGA-2 is matched to connect to an Elsys highprecision Transient Recorder it is also suitable for any 3rd party data... [See More]
- Form Factor: PC Board
- Differential Channels: Yes
- Analog Channels: 2
- Inputs: Bridge Input
from Acromag, Inc.
16D/32SE input channels. ±5V, ±10V, 0-5V, and 0-10V input ranges. 16-bit A/D converter, 8 µS conversion time (125KHz). AcPC330 boards provide fast, high resolution A/D conversion. The AcPC330 has many features to improve your overall system throughput rate. You can scan all... [See More]
- Form Factor: PC Board
- Differential Channels: Yes
- Analog Channels: 32
- Accuracy: 0.0050
from Electro-Sensors, Inc.
Analog to Frequency Conversion Module. Features. • 0-10 VDC and 4-20 mA inputs. • 0-20 Khz output switch selectable. • Inversely proportional output available. • NPN open collector or driven output. • 0.05% linearity. • Offset and gain adjustments. The AIFO-200 is an... [See More]
- Form Factor: PC Board; Rack Mount (optional feature)
- Digital I/O Channels: 0
- Analog Channels: 1
- DC Voltage: 0-10Vdc
from Trans-Tek, Inc.
The Series P010 Oscillator/Demodulator PC Boards are the ideal AC LVDT interface for OEM applications. The compact circuit board design includes an ASIC for the oscillation/demodulation function, with peripheral components included for voltage regulation, output scaling and filtering. The... [See More]
- Form Factor: PC Board
from D-TACQ Solutions
The ACQ216CPCI board represents the first in a new generation of intelligent high performance Analog Data Acquisition products from D-TACQ Solutions Ltd. The board samples 16 input channels simultaneously with 14 bit resolution at speeds up to 50 MSPS (mega-samples per second) and offers excellent... [See More]
- Form Factor: PC Board
- Differential Channels: Yes
- Analog Channels: 16
- DC Voltage: ±2.5V
from ACCES I/O Products, Inc.
FEATURES. Eight channels of AC LVDT conditioning. Full-bridge and Half-bridge LVDTs supported. Offset and wide-range gain calibration pots. Removable screw terminal blocks for easy connection and serviceability. Use easily with PLC or PC-based Data Acquisition. Non-multiplexed, simultaneous... [See More]
- Form Factor: PC Board
- Application: General Lab & Industrial
- Outputs: Analog Voltage Output
- Operating Temperature: 32 to 149
from OMEGA Engineering, Inc.
The CIO-EXP16 and CIO-EXP32, respectively, are 16 and 32 channel analog signal multiplexers. These accessory boards, designed for the CIO-DAS08 and CIO-DAS16 cards, can also be used with virtually any A/D board in a variety of multiplexing applications. The CIO-EXP16 multiplexers 16 inputs into a... [See More]
- Form Factor: PC Board
- Analog Channels: 16
- Signal Conditioning: Filter
- Differential Channels: Yes
from Data Device Corporation (DDC)
The RD-19230 is a small and versatile, low cost, state-of-the-art 16-bit monolithic Resolver-to-Digital Converter. This single chip converter offers programmable features such as resolution, bandwidth, velocity output scaling and encoder emulation. Compact and reliable, DDC ’s RD Series... [See More]
- Form Factor: PC Board
- Digital I/O Channels: 1
- Analog Channels: 1
- DC Voltage: 5 Volts
from Jewell Instruments, LLC
IRIS SC provides signal conditioning and serial data output for all of our Miniature Tilt Sensors. Use it with up to two uniaxial sensors, or any biaxial sensor. It has a 16-bit A/D converter, 540K of onboard FLASH memory, a real-time clock, and it also measures temperature. Its powerful firmware... [See More]
- Form Factor: PC Board
from Interface, Inc. - AZ
Why the Interface series HRBSC High Resolution Signal Conditioning Board is the best in class: Nonlinearity < 0.001% full scale. 22-bit resolution. High thermal stability. Shunt calibration, software selectable. Auto ID with Gold Standard load cells. ISA slot plug-in board. Bipolar [See More]
- Form Factor: PC Board
- Inputs: +/- 4.5 mV/V
- Signal Conditioning: Filter; Instrumentation Amplifier; Sample-and-Hold Amplifier; SigIsol
- Excitation: Voltage
from Spectron Glass and Electronics Inc.
The MUPI-2 Universal Signal Conditioner is a self contained, fully functional and adjustable conditioning module. This compact epoxy encapsulated package contains all the electronics and interface circuitry required, to operate any Spectron single axis electrolytic tilt sensor. Utilizing MIL spec... [See More]
- Form Factor: PC Board; Stand-alone
- Analog Channels: 1
- Signal Conditioning: Instrumentation Amplifier
- Differential Channels: Yes
from Piezo-Metrics
Sensor excitation of 4.5V RMS is provided. Selectable excitation frequency between 1 and 5 kHz. Selectable sensitivity from 20mV to 10V and fine trim with potentiometer. Wide bandwidth (200 Hz) for test & measurement applications. Selectable analogue output in voltage or current loop format... [See More]
- Form Factor: PC Board
- Inputs: LVDT
- AC Voltage: 110/230 V
- Outputs: Analog Voltage Output; Analog Current Output
from OTEK Corporation
OTEK's SCV is the basic signal conditioner. It accepts 5VDC power input (see section 4.0 on page 3), current requirements vary from few microamps to under 3.8mA depending on model. Their output is 0-1VDC into a >100K Ohm load. No adjustments are included. The module is 0.9 x 0.9 x 0.25 ”. [See More]
- Form Factor: PC Board
- AC Voltage: 0-130VAC
- DC Voltage: 5VDC +/- 10% Power Input
- AC Current: 0-5 Amps
from Red Pitaya, d.o.o.
SDRlab 122-16 was developed specifically for software-defined radio and more demanding RF applications. [See More]
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Analog Channels: 6
- Signal Conditioning: Filter; Bridge Conditioner (optional feature); Instrumentation Amplifier (optional feature)
- Differential Channels: Yes (optional feature)
from Encore Electronics, Inc.
The Model 664 is a two-channel computer-controlled dynamic strain gage amplifier module. The following parameters are displayed and are adjustable: gain, zero, external cal, filter, excitation and excitation monitor. Each channel has its own isolated constant current excitation source. [See More]
- Form Factor: PC Board
- Inputs: Bridge Input
- Signal Conditioning: Bridge Conditioner; Instrumentation Amplifier
- Excitation: Voltage; Current
from Electro Standards Laboratories
The CellMite ® Model 4331-200 connects directly to two standard AC LVDT (Linear Variable Differential Transformer) transducers and simultaneously generates a serial output for connection to a PC and a +/-10V analog output. The CellMite ® LVDT can be operated with a computer or simply setup... [See More]
- Form Factor: PC Board
- Inputs: LVDT; Bridge Input
- Analog Channels: 1
- Excitation: Voltage
from Fredericks Company - Televac
Mini Signal Conditoner Assy with 0717-4318-99 Dual Axis Sensor & RS232 [See More]
- Form Factor: PC Board
- Outputs: Analog Voltage Output; Analog Current Output; Frequency or Pulse Output
- Inputs: Tilt Sensor
- User Interface: None
from Acromag, Inc.
AcPC341 boards provide fast, high resolution, simultaneous A/D conversion of eight channels. These boards have sixteen analog inputs which are sampled as two eight-channel banks. Eight A/D converters (ADCs) permit simultaneous conversion of all eight channels in a bank. All 16 channels share two... [See More]
- Form Factor: PC Board
- Differential Channels: Yes
- Analog Channels: 16
- Accuracy: 0.0140
from D-TACQ Solutions
14 bit ADC per channel for true simultaneous analog input. High throughput: 2MSPS/channel (32 channels), 4MSPS/channel (16 channels). continuous converted data transfer to local memory, or offboard via CPCI backplane. Oversampling options with filtered, decimated output: 8MSPS Input Sample Rate,... [See More]
- Form Factor: PC Board
- Differential Channels: Yes
- Analog Channels: 32
- DC Voltage: ±2.5 or 10 V
from ACCES I/O Products, Inc.
Features. Designed to pair with an A/D board to increase channel count and signal conditioning capabilities. 32 single-ended or 16 differential inputs. 6 software programmable ranges: ±25mV, ±50mV, ±0.1V, ±2.5V, ±5V, ±10V. Up to 7 104-AIM-32s can be stacked... [See More]
- Form Factor: PC Board
- Differential Channels: Yes
- Analog Channels: 32
- DC Voltage: ±25mV, ±50mV, ±100mV, ±2.5V, ±5V, ±10V
from OMEGA Engineering, Inc.
The OME-A-822PGH/L are 12-bit multifunction analog and digital I/O boards for PC/AT compatible computers. The OME-A-822PGH/L offers 16 single-ended or 8 differential analog inputs, plus two channels of analog output with 12-bit resolution. In addition,the OME-A-822PGH/PGL has 16 digital inputs, 16... [See More]
- Form Factor: PC Board
- Differential Channels: Yes
- Analog Channels: 16
- Digital I/O Channels: 16
from Data Device Corporation (DDC)
Description: Low Cost Resolver-to-Digital-Monolithic. Can be set up as Resolver, Synchro or LVDT-to-Digital converter with tach grade velocity output. Available in military and industrial models. Resolution:10, 12, 14, or 16 bit. Accuracy: To +/-2.3 minutes. Tracking: To 1152 rps. The RDC-19224 is... [See More]
- Form Factor: PC Board
- Digital I/O Channels: 1
- Analog Channels: 1
- DC Voltage: 5 Volts
from Jewell Instruments, LLC
The Model 83162 Signal Conditioning Card is a precision two-channel circuit for use with all electrolytic tilt sensors. It has switchable gain and low-pass filter settings and will produce peak performance for the 755, 756, 84053 and 84064-02 Miniature Tilt Sensors. Model 83162 generates a balanced... [See More]
- Form Factor: PC Board
- Outputs: Analog Voltage Output
from Spectron Glass and Electronics Inc.
The MUPI-3 Universal Signal Conditioner is a self contained, fully functional and adjustable conditioning module, with the added ability of scale factor temperature compensation. This compact epoxy encapsulated package contains all the electronics and interface circuitry required, to operate any... [See More]
- Form Factor: PC Board; Stand-alone
- Analog Channels: 1
- Signal Conditioning: Instrumentation Amplifier
- Differential Channels: Yes
from Piezo-Metrics
The SGA Strain Gauge Amplifier is a high performance signal conditioner for single or multiple strain gauge bridge sensors such as load, force, pressure and torque. The SGA offers a wide bandwidth and a wide input signal range. The device can be powered from AC or DC supplies providing excitation... [See More]
- Form Factor: PC Board
- DC Current: 90 mA typical
- DC Voltage: 18 to 24 V DC
- AC Voltage: 110/230 V AC
from OTEK Corporation
The SCT has an integral 5-28VDC / DC to DC converter. The 4-20mA transmitter accepts 0-1 VDC full scale signal from your sensor convert it to a 4-20mA process signal. The unit is ideal for logic power 5V systems where 24V is not available. Its high efficiency DC-DC converter requires ~ 170mA when... [See More]
- Form Factor: PC Board
- AC Voltage: 0-130VAC
- DC Voltage: 5VDC +/- 10% Power Input
- AC Current: 0-5 Amps
from Red Pitaya, d.o.o.
SIGNALlab 250-12 is most sophisticated Red Pitaya product, built for more demanding industrial applications and research, where robustness and performance matter more than cost. [See More]
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Analog Channels: 6
- Signal Conditioning: Filter; Bridge Conditioner (optional feature); Instrumentation Amplifier (optional feature)
- Differential Channels: Yes (optional feature)
from Encore Electronics, Inc.
The Model 665 is a combo computer-controlled static/dynamic strain gage amplifier module. The following parameters are displayed and are adjustable: gain, zero, external cal, filter, excitation and excitation monitor. Each channel has its own isolated constant current excitation source. [See More]
- Form Factor: PC Board
- Inputs: Bridge Input
- Signal Conditioning: Bridge Conditioner; Instrumentation Amplifier
- Excitation: Voltage; Current
from Fredericks Company - Televac
The Fredericks Company has a variety of electronics products based on our industry leading tilt sensors. These high-accuracy, microprocessor based electronics can range from printed circuit assemblies to fully integrated packages, as well as remotely mounted sensors and assemblies. Our dual axis... [See More]
- Form Factor: PC Board
- Inputs: Tilt Sensor
- DC Voltage: 3 to 5 VDC
- Outputs: Analog Voltage Output; Analog Current Output; Frequency or Pulse Output
from Acromag, Inc.
16D/32SE channels ( ±5V, ±10V, 0-5V, and 0-10V input ranges). 16-bit A/D converter. 8 µS conversion time (125KHz). APC330 boards provide fast, high resolution A/D conversion. The APC330 has many features to improve your overall system throughput rate. You can scan all channels or... [See More]
- Form Factor: PC Board
- Differential Channels: Yes
- Analog Channels: 32
- Accuracy: 0.0050
from D-TACQ Solutions
16 bit DAC per channel for true simultaneous analog output. Low cost CPCI peripheral card, recommended for use with ACQ196CPCI. Low latency update mode - immediate write from PCI. Clocked update mode - includes buffer for high performance AWG. 1usec update DAC devices, AWG can operate to 1MHz. [See More]
- Form Factor: PC Board
- Outputs: Analog Voltage Output
- Analog Channels: 32
- User Interface: None
from ACCES I/O Products, Inc.
Features. Eight single-ended or differential analog inputs. 12-bit resolution. Nine software programmable voltage ranges. Programmable scan rate. Foreground/background operation. Three 16-bit counter/timers for event counting, pulse and waveform generation, and frequency measurement. Seven bits of... [See More]
- Form Factor: PC Board
- Differential Channels: Yes
- Analog Channels: 8
- DC Voltage: Programmable, ±5V (default), ±10V, ±0.5V, ±0.05V, ±0.01V, 0-10V, 0-1V, 0-0.1V, 0-0.02V.
from OMEGA Engineering, Inc.
The OME-A-826PG is a 16-bit multifunction analog and digital I/O board for PC/AT compatible computers. The OME-A-826PG offers 16 single-ended or 8 differential analog inputs, plus two channels of analog output with 12-bits resolution. In addition, the OME-A-826PG has 16 digital inputs, 16 digital... [See More]
- Form Factor: PC Board
- Differential Channels: Yes
- Analog Channels: 16
- Digital I/O Channels: 16
from Data Device Corporation (DDC)
Description: Pin for Pin upgrade to the RDC19220/2 Series Resolver-to-Digital-Monolithic converters. Added features include a synthesized reference, LOR detection and non-sampling front end amplifiers to allow for filtering. Can be configured for Resolver, Synchro or LVDT-to-Digital conversion. [See More]
- Form Factor: PC Board
- Digital I/O Channels: 1
- Analog Channels: 1
- DC Voltage: 5 Volts
from Jewell Instruments, LLC
Tulip SC is a 4-20mA signal conditioner for use with all of our Miniature Tilt Sensors. It operates one tilt channel and also measures temperature using a 2500 Ohm resistor. Tulip SC is current loop powered, so measurements can be made over long cable lengths using an economical 2-wire pair. You may... [See More]
- Form Factor: PC Board
- Outputs: Analog Current Output
from Spectron Glass and Electronics Inc.
The SA40072 is a single channel signal conditioner, which provides a 4 to 20mA output. With the ability to interface directly with the complete line of Spectron single axis electrolytic tilt sensors (not included), the SA40072 is the perfect solution for narrow or wide angle measurements. The open... [See More]
- Form Factor: PC Board
- Digital I/O Channels: 0
- Analog Channels: 1
- DC Voltage: 14V - 24V
from Piezo-Metrics
Digital set-up and calibration using handheld plug-in display / keypad or comms. Optional local or remote LCD display and keypad. Fully isolated 4-20 mA and 0-10 V analog outputs. Wide range of plug-in input modules providing transducer excitation. High accuracy and high stability over a wide... [See More]
- Form Factor: PC Board
- Outputs: Analog Voltage Output; Analog Current Output
- Digital I/O Channels: 2
- Operating Temperature: -4 to 158
from Red Pitaya, d.o.o.
SIGNALlab 250-12 is most sophisticated Red Pitaya product, built for more demanding industrial applications and research, where robustness and performance matter more than cost. [See More]
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Analog Channels: 6
- Signal Conditioning: Filter; Bridge Conditioner (optional feature); Instrumentation Amplifier (optional feature)
- Differential Channels: Yes (optional feature)
from Fredericks Company - Televac
The 1-6200-008 RS-485 signal conditioner can be used with any Fredericks electrolytic tilt sensor. A single signal conditioner can be connected to one dual axis sensor or up to two single axis sensors, providing output from 0% to 100% of the sensor's range. Frederick's dual-axis TrueTILT sensors can... [See More]
- Form Factor: PC Board
- Digital I/O Channels: 2
- Analog Channels: 1
- DC Voltage: 3 - 5 VDC
from Acromag, Inc.
8 or 16 voltage output channels. Independent D/A converter on each channel. 11 µS settling time. ±10V output range. The IP220A outputs analog voltage signals to drive up to 16 devices. When used with a carrier that holds four IP modules, up to 64 voltage outputs can be obtained from a... [See More]
- Form Factor: PC Board; Modular Bay or Slot System
- Accuracy: 0.0250
- Digital I/O Channels: 16
- Outputs: Analog Voltage Output
from D-TACQ Solutions
ACQ164CPCI is a high performance multichannel card aimed at phased array sonar, 3D seismic and system test applications. The board samples 64 input channels simultaneously with 24 bit resolution at speeds up to 128 kS/s (kilosamples per second) per channel sustained capture to memory or streamed to... [See More]
- Form Factor: PC Board
- Differential Channels: Yes
- Analog Channels: 64
- DC Voltage: ± 10V Default
from OMEGA Engineering, Inc.
The OME-DB-16P is a 16 channel isolated digital input daughter board. The optically isolated inputs of the OME-DB-16P consist of a bi-directional OPTO-coupler with a resistor for current sensing. You can use the OME-DB-16P to sense DC signals from TTL levels up to 24V. You can also use OME-DB-16P to... [See More]
- Form Factor: PC Board
- Analog Channels: 16
- Signal Conditioning: Filter; SigIsol
- DC Voltage: 5V 24V
from Jewell Instruments, LLC
This single-channel signal conditioning card is a compact electronic circuit that provides excitation and signal conditioning for any electrolytic tilt sensor and for one LM-35 temperature sensor. A wide input voltage range, reverse polarity protection and transient surge protection are advantages... [See More]
- Form Factor: PC Board
- Outputs: Analog Voltage Output
from Spectron Glass and Electronics Inc.
The SSY0079 Single Axis CMOS Signal Conditioning Module is a DC input/output operated device, which operates off a single ended supply, and provides a bipolar DC output. Specifically designed to interface directly with all Spectron Single Axis Tilt Sensors, and with the SP5000 Series Dual Axis Tilt... [See More]
- Form Factor: PC Board
- Analog Channels: 1
- Signal Conditioning: Instrumentation Amplifier
- Differential Channels: Yes
from Red Pitaya, d.o.o.
STEMlab 125-14 4 Inputs is based on STEMlab 125-14 board, but instead of 2 inputs and 2 output channels offers 4 Input channels that with improved performance. [See More]
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Analog Channels: 8
- Signal Conditioning: Filter; Bridge Conditioner (optional feature); Instrumentation Amplifier (optional feature)
- Differential Channels: Yes (optional feature)
from Fredericks Company - Televac
The 1-6200-007 analog/PWM signal conditioner can be used with any Fredericks electrolytic tilt sensor. A single signal conditioner can be connected to one dual axis sensor or up to two single axis sensors, providing output from 0% to 100% of the sensor ’s range. Fredericks dual-axis TrueTILT... [See More]
- Form Factor: PC Board
- Outputs: Analog Voltage Output; Analog Current Output; Frequency or Pulse Output
- Inputs: Tilt Sensor
- User Interface: None
from Acromag, Inc.
16 differential inputs (two 8-channel groups). 12 or 14-bit A/D. 125KHz throughput. 8 µS conversion time for 8-channel group. 512 sample FIFO buffer, ±10V input range. IP340/341 Industrial I/O Pack (IP) modules provide fast, high resolution, simultaneous A/D conversion of up to eight... [See More]
- Form Factor: PC Board
- Differential Channels: Yes
- Analog Channels: 16
- Accuracy: 0.0390
from D-TACQ Solutions
The ACQ196CPCI board meets the requirement for high channel density simultaneous data acquisition in cost-sensitve applications. The board samples 96 input channels simultaneously with 16 bit resolution at sample rates up to 500kSPS (kilo-samples per second) per channel, while still offering a... [See More]
- Form Factor: PC Board
- Differential Channels: Yes
- Analog Channels: 32
- DC Voltage: ±10V Default
from OMEGA Engineering, Inc.
The CIO-DIO192 can control 192 devices or sense 192 contact closures from a single card in a PC. The CIO-DIO192 employs eight 8255 parallel peripheral interface chips which are programmable in three modes; simple byte input or output or strobed I/O. [See More]
- Form Factor: PC Board
- Digital I/O Channels: 192
- Signal Conditioning: Digital I/O
- DC Voltage: 7V
from Spectron Glass and Electronics Inc.
The SSY0135 RS232 Signal Conditioner is a Single Axis Conditioner, which delivers an RS232 output. Designed to utilize the entire line of SH Series Ceramic Tilt Sensors (not included), the SSY0135 is capable of supplying digital data over a +/-0.5 to +/-80 degrees full range (sensor dependent). The... [See More]
- Form Factor: PC Board
- Digital I/O Channels: 0
- Analog Channels: 1
- DC Voltage: 7V - 20V
from Red Pitaya, d.o.o.
STEMlab 125-14 is our most versatile and popular product, which was introduced to the market in 2013 when Red Pitaya was established. Since then it has been used in a wide variety of contexts, from hobbyists and ham radio operators to industry, research, and space applications. [See More]
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Analog Channels: 6
- Signal Conditioning: Filter; Bridge Conditioner (optional feature); Instrumentation Amplifier (optional feature)
- Differential Channels: Yes (optional feature)
from Fredericks Company - Televac
The 1-6200-006 RS-232 signal conditioner can be used with any Fredericks electrolytic tilt sensor. A single signal conditioner can be connected to one dual axis sensor or up to two single axis sensors, providing output from 0% to 100% of the sensor ’s range. Fredericks dual-axis TrueTILT... [See More]
- Form Factor: PC Board
- Outputs: Analog Voltage Output; Analog Current Output; Frequency or Pulse Output
- Inputs: Tilt Sensor
- User Interface: None
from Acromag, Inc.
20 differential or 40 single-ended input channels. 200KHz throughput. 4.5 µS/conversion. Selectable input range ( ±5V, ±10V, 0-10V). The IP320A monitors 20 differential or 40 single-ended input channels. When used with a carrier that holds four IP modules, up to 160 inputs can be... [See More]
- Form Factor: PC Board
- Differential Channels: Yes
- Analog Channels: 40
- Accuracy: 0.0440
from OMEGA Engineering, Inc.
The 2-channel OMB-DBK4 dynamic signal-input card enables OMB-LOGBOOK and OMB-DAQBOARD-2000 Series data acquisition systems to accommodate inputs from piezoelectric transducers, such as accelerometers or microphones, as well as from various other dynamic signal sources. Each OMB-DBK4 card is equipped... [See More]
- Form Factor: PC Board
- Analog Channels: 2
- Signal Conditioning: Instrumentation Amplifier
- DC Voltage: +/-5 V
from Red Pitaya, d.o.o.
STEMlab 125-14 is our most versatile and popular product, which was introduced to the market in 2013 when Red Pitaya was established. Since then it has been used in wide variety of contexts, from hobbyists and ham radio operators to industry, research and space applications. [See More]
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Analog Channels: 6
- Signal Conditioning: Filter; Bridge Conditioner (optional feature); Instrumentation Amplifier (optional feature)
- Differential Channels: Yes (optional feature)
from Fredericks Company - Televac
The 1-6200-005 SPI signal conditioner is configured as an SPI slave and can be used with any Fredericks electrolytic tilt sensor. A single signal conditioner can be connected to one dual axis sensor or up to two single axis sensors, providing output from 0% to 100% of the sensor ’s range. [See More]
- Form Factor: PC Board
- Outputs: Analog Voltage Output; Analog Current Output; Frequency or Pulse Output
- Inputs: Tilt Sensor
- User Interface: None
from OMEGA Engineering, Inc.
The OME-DB-24C has 24 channels of optically isolated digital outputs, arranged into four isolated banks. Each digital output offers a darlington transistor and integral suppression diode for inductive load. The board interfaces to field logic signals, eliminating ground-loop problems and isolating... [See More]
- Form Factor: PC Board
- Analog Channels: 24
- Signal Conditioning: SigIsol
- Outputs: Analog Current Output; NPN
from Red Pitaya, d.o.o.
STEMlab 125-14 Edu Pack is based on Red Pitaya's best-selling DAQ platform and with the chosen accessories a perfect fit for educational purposes. [See More]
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Analog Channels: 6
- Signal Conditioning: Filter; Bridge Conditioner (optional feature); Instrumentation Amplifier (optional feature)
- Differential Channels: Yes (optional feature)
from OMEGA Engineering, Inc.
The OME-DB-24P is a 24 channel isolated digital input daughter board for OME-PIO-D144 digital input board. The optically isolated inputs of the OME-DB-24P consist of a bi-directional opto-couples with a resistor for current sensing. You can use the OME-DB-24P to sense DC signals from TTL levels up... [See More]
- Form Factor: PC Board
- Analog Channels: 24
- Signal Conditioning: Filter; SigIsol
- DC Voltage: 24Vdc
from Red Pitaya, d.o.o.
STEMlab 125-14 External clock is based on the STEMlab 125-14 model that is modified to be used with an external clock oscillator, which is important especially for RF applications that operate at other frequencies, require better quality clock or clock synchronization. With this modification, users... [See More]
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Analog Channels: 6
- Signal Conditioning: Filter; Bridge Conditioner (optional feature); Instrumentation Amplifier (optional feature)
- Differential Channels: Yes (optional feature)
from OMEGA Engineering, Inc.
The OME-DB-24POR includes 24 normally open, Form A, Photo MOS Relays. The board interfaces to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages. The user can use the OME-BB-24POR to switch loads, up to 350 Vac and up to 0.13 A. The relay is... [See More]
- Form Factor: PC Board
- Analog Channels: 24
- Signal Conditioning: SigIsol (optional feature)
- Outputs: Relay Output
from Red Pitaya, d.o.o.
Based on the STEMlab 125-14 Starter kit and it comes with individual ISO17025 certificate. [See More]
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Analog Channels: 6
- Signal Conditioning: Filter; Bridge Conditioner (optional feature); Instrumentation Amplifier (optional feature)
- Differential Channels: Yes (optional feature)
from OMEGA Engineering, Inc.
The OME-A-8111 is a 12-bit multifunction analog and digital I/O board for PC/AT compatible computers. The OME-A-8111 offers 8 analog input channels, plus one channel of analog output with 12-bit resolution. In addition, the OME-A-8111 has 16 digital inputs and 16 digital outputs. The OME-A-8111... [See More]
- Form Factor: PC Board
- Digital I/O Channels: 16
- Analog Channels: 8
- Accuracy: 0.0060
from Red Pitaya, d.o.o.
STEMlab 125-14 Low Noise Bare OEM is the ultimate solution for customization and adaptability in your electronic project. This board, which comes without the usual connectors, provides unparalleled freedom and versatility to tailor your designs according to your specific needs. [See More]
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Analog Channels: 6
- Signal Conditioning: Filter; Bridge Conditioner (optional feature); Instrumentation Amplifier (optional feature)
- Differential Channels: Yes (optional feature)
from OMEGA Engineering, Inc.
The OMB-DBK5 current-output card provides OMB-DAQBOARD-2000 Series data acquisition systems with the ability to control four isolated 4 to 20 mA current loops. The OMB-DBK5 acts as a current loop transmitter by modulating current from an external source. The OMB-DBK5 can be programmed with a static... [See More]
- Form Factor: PC Board
- User Interface: Computer Programmable
- Outputs: Analog Voltage Output; Analog Current Output
- Application: General Lab & Industrial; Environmental; Weather / Meteorology; Medical / Biomedical
from Red Pitaya, d.o.o.
STEMlab 125-14 Low Noise is based on a STEMlab 125-14 board that is populated with additional linear analog power for analog power supplies to reduce RF inputs and outputs noise and consequently increase ENOB. [See More]
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Analog Channels: 6
- Signal Conditioning: Filter; Bridge Conditioner (optional feature); Instrumentation Amplifier (optional feature)
- Differential Channels: Yes (optional feature)
from OMEGA Engineering, Inc.
The 4-channel OMB-DBK2 voltage-output card provides OMEGA ’s OMB-DAQBOARD-2000 Series data acquisition systems with the ability to generate precise bipolar analog voltage outputs. The OMB-DBK2's outputs can be programmed with a static value whenever the data acquisition system is not... [See More]
- Form Factor: PC Board
- Outputs: Analog Voltage Output
- Analog Channels: 4
from Red Pitaya, d.o.o.
We are setting the industry standard in product quality and customer support, our STEMlab OEM boards are easy to integrate and available in multiple hardware and software configurations. [See More]
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Analog Channels: 6
- Signal Conditioning: Filter; Bridge Conditioner (optional feature); Instrumentation Amplifier (optional feature)
- Differential Channels: Yes (optional feature)
from OMEGA Engineering, Inc.
The OMB-DBK7 frequency-input card provides OMB-LOGBOOK and OMB-DAQBOARD-2000 Series data acquisition systems with four channels of frequency-measurement capability. The card measures the input signal ’s frequency and converts the frequency to a voltage, which can then be measured by the data... [See More]
- Form Factor: PC Board
- Digital I/O Channels: 4
- Analog Channels: 4
- Accuracy: 0.1000
from Red Pitaya, d.o.o.
STEMlab 125-14 is our most versatile and popular product, which was introduced to the market in 2013 when Red Pitaya was established. Since then it has been used in wide variety of contexts, from hobbyists and ham radio operators to industry, research and space applications. [See More]
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Analog Channels: 6
- Signal Conditioning: Filter; Bridge Conditioner (optional feature); Instrumentation Amplifier (optional feature)
- Differential Channels: Yes (optional feature)
from OMEGA Engineering, Inc.
The OMB-DBK18 low-pass filter card provides OMEGA ’s OMB-LOGBOOK and OMB-DAQBOARD-2000 Series data acquisition systems with four low-pass filters that can be individually configured for a cut-off frequency from DC to 50 kHz, and for Butterworth, Chebyshev or Bessel characteristics. Each... [See More]
- Form Factor: PC Board
- Analog Channels: 4
- Signal Conditioning: Filter; Instrumentation Amplifier
- Differential Channels: Yes
from Red Pitaya, d.o.o.
STEMlab 125-14 is our most versatile and popular product, which was introduced to the market in 2013 when Red Pitaya was established. Since then it has been used in wide variety of contexts, from hobbyists and ham radio operators to industry, research and space applications. [See More]
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Analog Channels: 6
- Signal Conditioning: Filter; Bridge Conditioner (optional feature); Instrumentation Amplifier (optional feature)
- Differential Channels: Yes (optional feature)
from OMEGA Engineering, Inc.
The CIO-DIO48 can control 48 devices or sense 48 contact closures from a single half-size card in a PC. The CIO-DIO48 employs two 8255 parallel peripheral interface chips which are programmable in three modes; simple byte input or output or strobed I/O. The 8255 is simple to program. The CIO-DIO48... [See More]
- Form Factor: PC Board
- Digital I/O Channels: 48
- Signal Conditioning: Digital I/O
- DC Voltage: 7V
from Red Pitaya, d.o.o.
STEMlab 125-14 X-Channel System is designed for applications that require multi-channel RF signal acquisition and generation. It enables the user to stream analog and digital signals from/to the client's PC. X-Channel System consists of multiple STEMlab 125-14 devices that are modified and comes... [See More]
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Analog Channels: 6
- Signal Conditioning: Filter; Bridge Conditioner (optional feature); Instrumentation Amplifier (optional feature)
- Differential Channels: Yes (optional feature)
from OMEGA Engineering, Inc.
The OMB-DBK50 and the OMB-DBK51 are eight-channel, isolated voltage-input modules that allow OMEGA ’s OMB-DAQBOARD-2000 Series and OMB-LOGBOOK data acquisition systems to isolate up to eight channels of analog input. Both the OMB-DBK50 and OMB-DBK51 modules offer 750 V isolation from... [See More]
- Form Factor: PC Board
- Analog Channels: 8
- Signal Conditioning: SigIsol
- Accuracy: 0.1000
from Red Pitaya, d.o.o.
STEMlab 125-14Z7020 Low Noise is based on a STEMlab 125-14 Z7020 board that is populated with additional linear analog power for analog power supplies to reduce RF inputs and outputs noise and consequently increase ENOB. [See More]
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Analog Channels: 6
- Signal Conditioning: Filter; Bridge Conditioner (optional feature); Instrumentation Amplifier (optional feature)
- Differential Channels: Yes (optional feature)
from OMEGA Engineering, Inc.
The TCIC Series comprises low-cost, high-speed thermocouple temperature measurement data acquisition cards with USB interface. TCIC cards use an 8-channel, high-resolution A/D converter with on-board noise filters. On-board cold junction compensation and temperature conversion enable standalone... [See More]
- Form Factor: PC Board
- Accuracy: 0.0500
- Analog Channels: 8
- DC Voltage: ±500 mV
from Red Pitaya, d.o.o.
STEMlab 125-14Z7020 Low Noise is based on a STEMlab 125-14 Z7020 board that is populated with additional linear analog power for analog power supplies to reduce RF inputs and outputs noise and consequently increase ENOB. [See More]
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Analog Channels: 6
- Signal Conditioning: Filter; Bridge Conditioner (optional feature); Instrumentation Amplifier (optional feature)
- Differential Channels: Yes (optional feature)
from OMEGA Engineering, Inc.
The iNET-400 system is a low cost card cage that attaches to Windows computers via USB 2.0. The advantage of a card cage is that you can select which I/O modules to install as needed to build a customized system. The instruNet card cage typically has one A/D measurement module and additional modules... [See More]
- Form Factor: PC Board; Modular Bay or Slot System
- Differential Channels: Yes
- Analog Channels: 16
- Digital I/O Channels: 4
from OMEGA Engineering, Inc.
The OMEGA® PCM series converter modules facilitate conversion of a 4 to 20 mA output to an on/off time proportioning output. The modules mount directly to the input terminals of an SSR. Screw terminals are provided on the converter of the 4 to 20 mA control signal. The SSR's power section connects... [See More]
- Form Factor: PC Board; Screw Mount
- DC Voltage: 32V
- Analog Channels: 1
- DC Current: 4-20 mA