Low Pass Signal Conditioners
from Transducer Techniques, LLC
MODEL TMO-2. The TMO-2 Transducer Modules is a complete differential amplifier/signal conditioners with self contained power. The units provide excitation, balance and span adjustment via precision 10 turn pots, and shunt calibration necessary to couple a user supplied bridge type transducer to an... [See More]
- Function: LowPass
- Form Factor: Panel / Chassis Mount
- Signal Conditioning: Bridge Conditioner
- Inputs: Bridge Input
from Dataforth Corporation
8B modules are an optimal solution for monitoring real-world process signals and providing high-level signals to a data acquisition system. Each 8B30 or 8B31 module isolates, filters, and amplifies a voltage input signal and provides an analog voltage output. Signal filtering is accomplished with a... [See More]
- Function: LowPass
- Form Factor: Modular Bay or Slot System
- Signal Conditioning: Filter; SigIsol
- Analog Channels: 1
from Transducer Techniques, LLC
The TMO-2A Transducer Modules is a complete differential amplifier/signal conditioners with self contained power. The unit provide excitation, balance and span adjustment via precision 10 turn pots, and shunt calibration necessary to couple a user supplied bridge type transducer to an indicating... [See More]
- Function: LowPass
- Form Factor: Panel / Chassis Mount
- Signal Conditioning: Bridge Conditioner
- Inputs: Bridge Input
from Dataforth Corporation
8B modules are an optimal solution for monitoring real-world process signals and providing high-level signals to a data acquisition system. Each 8B32 module isolates, filters, and amplifies a process current input signal and provides an analog voltage output. Current to voltage conversion is... [See More]
- Function: LowPass
- Form Factor: Modular Bay or Slot System
- Signal Conditioning: Filter; SigIsol
- Analog Channels: 1
from Dataforth Corporation
8B modules are an optimal solution for monitoring real-world process signals and providing high-level signals to a data acquisition system. Each 8B34 input module isolates, filters, amplifies, and linearizes a single channel of temperature input from an RTD and provides an analog voltage output. RTD... [See More]
- Function: LowPass
- Form Factor: Modular Bay or Slot System
- Signal Conditioning: Filter; SigIsol
- Analog Channels: 1
from Dataforth Corporation
8B modules are an optimal solution for monitoring real-world process signals and providing high-level signals to a data acquisition system. Each 8B35 input module isolates, filters, amplifies, and linearizes a single channel of temperature input from an RTD and provides an analog voltage output. RTD... [See More]
- Function: LowPass
- Form Factor: Modular Bay or Slot System
- Signal Conditioning: Filter; SigIsol
- Analog Channels: 1
from Dataforth Corporation
8B modules are an optimal solution for monitoring real-world process signals and providing high-level signals to a data acquisition system. Each 8B36 input module isolates, filters, and amplifies a single channel of potentiometer input and provides an analog voltage output. Excitation for the... [See More]
- Function: LowPass
- Form Factor: Modular Bay or Slot System
- Signal Conditioning: Filter; SigIsol
- Analog Channels: 1
from Dataforth Corporation
8B modules are an optimal solution for monitoring real-world process signals and providing high-level signals to a data acquisition system. Each 8B37 nonlinearized module isolates, filters, and amplifies a single channel of temperature input from a thermocouple input signal and provides an analog... [See More]
- Function: LowPass
- Form Factor: Modular Bay or Slot System
- Signal Conditioning: Filter; SigIsol
- Analog Channels: 1
from Dataforth Corporation
8B modules are an optimal solution for monitoring real-world process signals and providing high-level signals to a data acquisition system. Each 8B38 module isolates, filters, and amplifies a full-bridge strain gage input signal and provides an analog voltage output. The 8B38 can interface to... [See More]
- Function: LowPass
- Form Factor: Modular Bay or Slot System
- Signal Conditioning: Filter; Bridge Conditioner; SigIsol
- Analog Channels: 1
from Dataforth Corporation
8B modules are an optimal solution for monitoring real-world process signals and providing high-level signals to a data acquisition system. Each 8B39 module accepts an input signal from a non-isolated source, then isolates, filters, and converts the signal to an analog process current output. Signal... [See More]
- Function: LowPass
- Form Factor: Modular Bay or Slot System
- Signal Conditioning: Filter; SigIsol
- Analog Channels: 1
from Dataforth Corporation
8B modules are an optimal solution for monitoring real-world process signals and providing high-level signals to a data acquisition system. Each 8B40 or 8B41 module isolates, filters, and amplifies a voltage input signal and provides an analog voltage output. Signal filtering is accomplished with a... [See More]
- Function: LowPass
- Form Factor: Modular Bay or Slot System
- Signal Conditioning: Filter; SigIsol
- Analog Channels: 1
from Dataforth Corporation
8B modules are an optimal solution for monitoring real-world process signals and providing high-level signals to a data acquisition system. Each 8B42 module provides power to a current transmitter, then isolates, filters, and amplifies the resulting process current input signal and provides an... [See More]
- Function: LowPass
- Form Factor: Modular Bay or Slot System
- Signal Conditioning: Filter; SigIsol
- Analog Channels: 1
from Dataforth Corporation
SensorLex ® 8B43 modules are an optimal solution for monitoring real-world process signals and providing high-level signals to a data acquisition system. Each 8B43 module isolates, filters, and amplifies a voltage input signal and provides an analog voltage output. The 8B43 can interface to... [See More]
- Function: LowPass
- Analog Channels: 1
- Form Factor: Modular Plug-in-board
- Accuracy: 0.0500
from Dataforth Corporation
8B modules are an optimal solution for monitoring real-world process signals and providing high-level signals to a data acquisition system. Each 8B47 module isolates, filters, amplifies, and linearizes a single channel of temperature input from a thermocouple and provides an analog voltage output. [See More]
- Function: LowPass
- Form Factor: Modular Bay or Slot System
- Signal Conditioning: Filter; SigIsol
- Analog Channels: 1
from Dataforth Corporation
8B modules are an optimal solution for monitoring real-world process signals and providing high-level signals to a data acquisition system. Each 8B49 module accepts an input signal from a non-isolated source, then isolates, filters and converts the signal to a high-level process voltage output. [See More]
- Function: LowPass
- Form Factor: Modular Bay or Slot System
- Signal Conditioning: Filter; SigIsol
- Analog Channels: 1
from Dataforth Corporation
8B modules are an optimal solution for monitoring real-world process signals and providing high-level signals to a data acquisition system. Each 8B50 or 8B51 module isolates, filters, and amplifies a voltage input signal and provides an analog voltage output. Signal filtering is accomplished with a... [See More]
- Function: LowPass
- Form Factor: Modular Bay or Slot System
- Signal Conditioning: Filter; SigIsol
- Analog Channels: 1
from Dataforth Corporation
Each DSCA30/31 voltage input module provides a single channel of analog input which is filtered, isolated, amplified, and converted to a high-level voltage output. Signal filtering is accomplished with a five-pole filter which provides 85dB of normal-mode rejection at 60Hz and 80dB at 50Hz. An... [See More]
- Function: LowPass
- Form Factor: DIN Rail
- Signal Conditioning: Filter; Instrumentation Amplifier; SigIsol
- Analog Channels: 1
from Dataforth Corporation
Each DSCP20 2-wire transmitter is designed for measuring temperature using thermocouples or RTDs. The input type, measurement range, and other features are software configurable. A PC, the DSCX-887 and DSCX-416 interface cables, and the DSCX-895 configuration software are required to configure the... [See More]
- Function: LowPass
- Form Factor: DIN Rail
- Signal Conditioning: Isolation Amplifier; SigIsol
- Analog Channels: 1
from Dataforth Corporation
Each isolated DSCP81 signal conditioner is designed for measuring voltages up to ±1000VDC and currents up to ±100mA. The input type, measurement range, and other features are software configurable. A PC with RS-232C serial port, the DSCX-787 and DSCX-587 interface cables, and the... [See More]
- Function: LowPass
- Form Factor: DIN Rail
- Signal Conditioning: Isolation Amplifier; SigIsol
- Accuracy: 0.1000
from LORD MicroStrain Sensing Systems
Carrier Amplifier-Oscillator/Demodulator for DVRTs ®; Inductive, Capacitive and Resistive Bridge Circuits. Overview. The DEMOD-DC ® in-line signal conditioner makes DVRT ® sensors as easy to use as a potentiometer. With integral signal conditioning electronics, the user connects power,... [See More]
- Function: LowPass
- DC Voltage: 6-16 V
- Signal Conditioning: Bridge Conditioner
- Inputs: LVDT
from Gefran
This digital amplifier measures at the strain gage bridge eight times per millisecond which gives a high oversampling range. This gives a stable signal output with high accuracy and reproducibility. The digitalised signal can be trensformed into various outputs. [See More]
- Function: LowPass
- Inputs: Bridge Input
- Signal Conditioning: Bridge Conditioner
- Outputs: Analog Voltage Output
from Apix, Inc.
Model DAQ8-100V4-1RTU. ISODIN Modbus RTU DIN MODULE. This Modbus RTU version Voltage Input Module features 8 independent channels and an isolated RS-485 interface. The channels are fully isolated with 3000 Vrms between Input, Power, RS [See More]
- Function: LowPass
- Form Factor: DIN Rail
- Signal Conditioning: SigIsol
- Analog Channels: 8
from FMS USA, Inc.
No programming required. Standardised analogue outputs. Galvanically isolated. DIN rail mount. Gain and offset setting by 20-turn trimmers [See More]
- Function: LowPass
- Form Factor: DIN Rail
- Signal Conditioning: Instrumentation Amplifier
- Inputs: Bridge Input
from RESON
The VP2000 is a 1MHz bandwidth voltage preamplifier designed for uses in conjunction with piezoelectric hydrophones. VP2000 offers excellent low-noise performance over the entire frequency range; gain selections in 6 levels from 0 to 50dB. A range of 12 high-pass and 12 low-pass filters are... [See More]
- Function: LowPass; HighPass; BandPass
- Form Factor: Stand-alone
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 1
from OMEGA Engineering, Inc.
The OMB-DBK7 frequency-input card provides OMB-LOGBOOK and OMB-DAQBOARD-2000 Series data acquisition systems with four channels of frequency-measurement capability. The card measures the input signal ’s frequency and converts the frequency to a voltage, which can then be measured by the data... [See More]
- Function: LowPass
- Analog Channels: 4
- Form Factor: PC Board
- Digital I/O Channels: 4
from Encore Electronics, Inc.
The Model 176 is a computer-controlled charge amplifier module. It features variable gain and output scaling and will accept differential or single-ended inputs. The following parameters are displayed and adjustable: accelerometer sensitivity, differential or single-ended mode, scaling, filter... [See More]
- Function: LowPass; HighPass
- Form Factor: PC Board
- Signal Conditioning: Bridge Conditioner; Instrumentation Amplifier
- Inputs: Bridge Input
from Stellar Technology
The Series AP5104 DIN-rail Amplifier is a high reliability conditioner for measurement of displacement with an LVDT (linear variable differential transformer). It can be used with 4, 5, and 6-wire LVDT ’s. The AP5104 provides regulated AC excitation with remote sensing for applications which... [See More]
- Function: LowPass
- Form Factor: DIN Rail
- Signal Conditioning: Instrumentation Amplifier
- Excitation: Voltage
from LORD MicroStrain Sensing Systems
LORD MicroStrain ® Displacement Variable Reluctance Transducer (DVRT ®) systems enable precise micro-position measurement for a wide variety of applications. From slow, slight movements over time to high frequency vibration, the DVRT ® system provides accurate, repeatable measurement. [See More]
- Function: LowPass
- Frequency: 156 kHz typical
- Signal Conditioning: Bridge Conditioner
- Inputs: LVDT
from Gefran
This digital amplifier measures at the strain gage bridge eight times per millisecond which gives a high oversampling range. This gives a stable signal output with high accuracy and reproducibility. The digitalised signal can be trensformed into various outputs. [See More]
- Function: LowPass
- Inputs: Bridge Input
- Signal Conditioning: Bridge Conditioner
- Outputs: Analog Voltage Output
from Apix, Inc.
Model DAQ8-10V4-1RTU. ISODIN Modbus RTU DIN MODULE. This Modbus RTU version Voltage Input Module features 8 independent channels and an isolated RS-485 interface. The channels are fully isolated with 3000 Vrms between Input, Power, RS- [See More]
- Function: LowPass
- Form Factor: DIN Rail
- Signal Conditioning: SigIsol
- Analog Channels: 8
from FMS USA, Inc.
Digital, microprocessor controlled. Top performance at highest speed. 3 programming keys and 2-line LCD. Easy to set up and operate. 3 housing versions. Available as wall, rail and panel mount. Galvanic isolated. Protected against electrical noise. Additional features. Auto-Calibration and -Tare... [See More]
- Function: LowPass
- Form Factor: Panel / Chassis Mount; DIN Rail
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 2
from OMEGA Engineering, Inc.
The OMB-DBK18 low-pass filter card provides OMEGA ’s OMB-LOGBOOK and OMB-DAQBOARD-2000 Series data acquisition systems with four low-pass filters that can be individually configured for a cut-off frequency from DC to 50 kHz, and for Butterworth, Chebyshev or Bessel characteristics. Each... [See More]
- Function: LowPass
- Form Factor: PC Board
- Signal Conditioning: Filter; Instrumentation Amplifier
- Analog Channels: 4
from Encore Electronics, Inc.
The Model 619M is a low cost differential amplifier useful in test environments where high CMRR is desired. Encore's Model 227. F/V converter can also be used in the six-module 4015-111 rack. An. AC power supply is built into the rack, and provides the required unregulated DC voltages to operate the... [See More]
- Function: LowPass
- Form Factor: Rack Mount
- Signal Conditioning: Instrumentation Amplifier
- DC Voltage: +/- 10 V Max
from Gefran
This digital amplifier measures at the strain gage bridge eight times per millisecond which gives a high oversampling range. This gives a stable signal output with high accuracy and reproducibility. The digitalised signal can be trensformed into various outputs. [See More]
- Function: LowPass
- Inputs: Bridge Input
- Signal Conditioning: Bridge Conditioner
- Outputs: Analog Voltage Output
from Apix, Inc.
Model DAQ8-20mA4-1RTU. ISODIN Modbus RTU DIN MODULE. This Modbus RTU version Current Input Module features 8 independent channels and an isolated RS-485 interface. The channels are fully isolated with 3000 Vrms between Input, Power, RS [See More]
- Function: LowPass
- Form Factor: DIN Rail
- Signal Conditioning: SigIsol
- Analog Channels: 8
from FMS USA, Inc.
The EMGZ321, a left/right strain gauge amplifier, measures the material tension on both sides of the roller independently. Thus it is possible to monitor the load distribution over the measuring roller with great accuracy. This high-grade product comes as a plug & play unit and is easy to setup. [See More]
- Function: LowPass
- Form Factor: Panel / Chassis Mount; DIN Rail
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 2
from OMEGA Engineering, Inc.
The OMB-DBK50 and the OMB-DBK51 are eight-channel, isolated voltage-input modules that allow OMEGA ’s OMB-DAQBOARD-2000 Series and OMB-LOGBOOK data acquisition systems to isolate up to eight channels of analog input. Both the OMB-DBK50 and OMB-DBK51 modules offer 750 V isolation from... [See More]
- Function: LowPass
- Form Factor: PC Board
- Signal Conditioning: SigIsol
- Analog Channels: 8
from Encore Electronics, Inc.
The Model FL646 Thermocouple Isolation Amplifier conditions a millivolt input from a thermocouple temperature probe. The input is isolated from the output by up to 1000VDC. The unit is mechanically and electrically compatible with Encore's other Flexi-line DIN-rail mounted instrumentation. [See More]
- Function: LowPass
- Form Factor: DIN Rail
- Signal Conditioning: Isolation Amplifier
- DC Voltage: +/-40mV DC
from Gefran
This digital amplifier measures at the strain gage bridge eight times per millisecond which gives a high oversampling range. This gives a stable signal output with high accuracy and reproducibility. The digitalised signal can be trensformed into various outputs. [See More]
- Function: LowPass
- Inputs: Bridge Input
- Signal Conditioning: Bridge Conditioner
- Outputs: Analog Voltage Output
from Apix, Inc.
DESCRIPTION. The ISODIN Series DIN Modules feature 8 independent Analog channels and conform to the Industry Standard Modbus RTU Communications Protocol. They are fully isolated with 3000 Vrms between Input, Power,. RS-485 ser [See More]
- Function: LowPass
- Form Factor: DIN Rail
- Signal Conditioning: SigIsol
- Analog Channels: 8
from OMEGA Engineering, Inc.
The LDX-3A is a compact oscillator/ demodulator unit with adjustable span, zero and phase controls for use with any OMEGA ® (as well as most other manufacturers) ac LVDT transducers. The unit is housed in a die-cast aluminum box providing a high degree of mechanical and environmental protection. [See More]
- Function: LowPass
- Form Factor: Stand-alone
- Signal Conditioning: Filter; Demodulator
- Outputs: Analog Voltage Output; Analog Current Output
from Gefran
This digital amplifier measures at the strain gage bridge eight times per millisecond which gives a high oversampling range. This gives a stable signal output with high accuracy and reproducibility. The digitalised signal can be trensformed into various outputs. [See More]
- Function: LowPass
- Inputs: Bridge Input
- Signal Conditioning: Bridge Conditioner
- Outputs: Analog Voltage Output
from Apix, Inc.
Model DAQ8-80mV4-1RTU. ISODIN Modbus RTU DIN MODULE. This Modbus RTU version mV Input Module features 8 independent channels and an isolated RS-485 interface. The channels are fully isolated with 3000 Vrms between Input, Power, RS-485 [See More]
- Function: LowPass
- Form Factor: DIN Rail
- Signal Conditioning: SigIsol
- Analog Channels: 8
from OMEGA Engineering, Inc.
The OMB-DBK45 card provides OMEGA ’s OMB-LOGBOOK and OMB-DAQBOARD-2000 Series data acquisition systems with four differential analog input channels equipped with low-pass filters and simultaneous sample-and-hold. The OMB-DBK45 provides a wide selection of full scale inputs. Each channel... [See More]
- Function: LowPass
- Form Factor: PC Board
- Signal Conditioning: Filter; Sample-and-Hold Amplifier
- Analog Channels: 4
from Apix, Inc.
Model DAQ8-TC4-1RTU. ISODIN Modbus RTU DIN MODULE. This Modbus RTU version TC Input Module features 8 independent Thermocouple channels and an isolated RS-485 interface. Channel #8 can be used to measure a remote or local cold junction [See More]
- Function: LowPass
- Form Factor: DIN Rail
- Signal Conditioning: SigIsol
- Analog Channels: 8
from Apix, Inc.
DESCRIPTION. The ISODIN Series DIN Modules feature 8 independent Analog channels and conform to the Industry Standard Modbus RTU Communications Protocol. Based on their high channel density, a single 32 module segment includes 256 c [See More]
- Function: LowPass
- Form Factor: DIN Rail
- Signal Conditioning: SigIsol
- Analog Channels: 8