Instrumentation Amplifier Signal Conditioners
from Dataforth Corporation
Each DSCA30/31 voltage input module provides a single channel of analog input which is filtered, isolated, amplified, and converted to a high-level voltage output. Signal filtering is accomplished with a five-pole filter which provides 85dB of normal-mode rejection at 60Hz and 80dB at 50Hz. An... [See More]
- Signal Conditioning: Filter; Instrumentation Amplifier; SigIsol
- Analog Channels: 1
- Form Factor: DIN Rail
- Differential Channels: Yes
from Electro Optical Components, Inc.
Gain Switchable in 10 dB Steps up to 70 dB. Bandwidth 1 kHz to 1.2 GHz. Bandwidth Independent of Gain Setting (Guaranteed). 1.9 dB (330 pV/ √Hz). Local and Remote Gain Control. The Ultra-Wideband Voltage Amplifiers Series DUPVA-1 is designed for fast and precision measurements with large... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Outputs: Analog Voltage Output
- Form Factor: Panel / Chassis Mount
- User Interface: None
from Dexter Research Center, Inc.
Features: So durable, we call it our "little brick", this low noise, DC-coupled amplifier is packaged in a rugged, die-cast aluminum case with BNC connectors enabling input and output. This amplifier is the perfect addition to your laboratory toolbox. Two 9V batteries included provide an operational... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 1
- Form Factor: Stand-alone
- Outputs: Analog Voltage Output
from Dataforth Corporation
Each SCM5B30 and SCM5B31 voltage input module provides a single channel of analog input which is filtered, isolated, amplified, and converted to a high-level analog voltage output (Figure 1). This voltage output is logic-switch controlled, allowing these modules to share a common analog bus without... [See More]
- Signal Conditioning: Filter; Instrumentation Amplifier; SigIsol
- Analog Channels: 1
- Form Factor: DIN Rail; Rack Mount
- Differential Channels: Yes
from Electro Optical Components, Inc.
Voltage amplifiers with variable gain 10 to 60 dB (x 3 to x 1,000). Bandwidth DC to 100/200 MHz Independent of Gain (Guaranteed). DC-Drift 0.3 µV/ °C. Input Noise 2.3 nV/ √Hz. Local and Remote Control. DHPVA series are high precision amplifiers with unique features delivering an... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Outputs: Analog Voltage Output
- Form Factor: Panel / Chassis Mount
- User Interface: None
from Dexter Research Center, Inc.
Features: Available in three amplifier gains: 300, 500 and 1,000, this PCB includes a LM20 temperature sensor and 1.25V voltage reference. Although sized for single channel TO-5 packages, this amplifier is electrically compatible with all Dexter Research Center detectors, providing convenient... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 1
- Form Factor: PC Board
- DC Voltage: 2.7-5.5 Volts
from Dataforth Corporation
Each SCM7B21/30/31 voltage input module accepts one channel of analog voltage input which is filtered, isolated, amplified, and converted to a high-level analog voltage for output to the process control system. These modules incorporate a five-pole filtering approach to maximize both time and... [See More]
- Signal Conditioning: Filter; Instrumentation Amplifier; SigIsol
- Analog Channels: 1
- Form Factor: DIN Rail; Rack Mount
- Differential Channels: Yes
from Electro Optical Components, Inc.
Amplifier AMT-07M converts the output current of a signal source (such as Mid-Infrared photodiode) into a voltage with amplification for subsequent use with various electronic systems, such as lock-in amplifiers, oscilloscopes or A/D converters. Synchronous detector is built in the same package and... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Outputs: Analog Voltage Output
- Form Factor: Stand-alone
- User Interface: Front Panel
from Electro Optical Components, Inc.
Current and Voltage Input. Working Frequency up to 45 kHz. Adjustable Sensitivity, Time Constant and Phase. Local and Remote Control. Compact and EMI-Shielded Case. In modern optoelectronic systems lock-in-amplification is one of the most useful techniques to get rid of unwanted noise and to improve... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Outputs: Analog Voltage Output
- Form Factor: Panel / Chassis Mount
- User Interface: None
from Electro Optical Components, Inc.
Features. High Gain of 10 V/pC. Wide Operating Range from 250 Hz to 15 MHz. Low Input Noise of 40 x 10-21 C/ √Hz and 700 pV/ √Hz. Optimized for Sinusoidal Signals from AC Coupled Charge Sources. Applications. Pyro- and Piezoelectric Detectors. Tuning Fork Quartz Crystals. Length... [See More]
- Signal Conditioning: Instrumentation Amplifier
- User Interface: None
- Outputs: Analog Voltage Output
- Maximum Output: 10
from Electro Optical Components, Inc.
High speed voltage amplifiers with bandwidth up to 2.5 GHz. Gain up to 60 dB (50,000 V/A). Input Noise 330 pV/ √Hz (6.6 pA/ √Hz). Integrated DC Path for Easy Operation with Fast Photodiodes. Two Identical Signal Outputs (HSA-Y). DC-Monitor Output (HSA-Y). The HSA series high speed... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Outputs: Analog Voltage Output
- Form Factor: Panel / Chassis Mount
- User Interface: None
from Electro Optical Components, Inc.
Minimum Input Noise 270 fA/ √Hz. Bandwidth up to 400 MHz. Gain up to 106 V/A. Flat frequency response. Stabilized and Adjustable Bias Voltage Output for Biasing External Photodiodes. EMI Shielded Case. Users of high frequency components are often confronted with problems including unwanted... [See More]
- Signal Conditioning: Instrumentation Amplifier
- User Interface: None
- Outputs: Analog Voltage Output
- Bandwidth: 400000
from Electro Optical Components, Inc.
Single and Dual Phase. Rugged Aluminum Housing. BNC Connectors for Input and Output Signals. Working Frequency 5 Hz up to 120 kHz. Phase Shifter 0 ... +360 °. Current and Voltage Input. The high prices for usual desktop lock-in amplifiers mean that they are not as common in noise limited... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Outputs: Analog Voltage Output
- Form Factor: Stand-alone
- User Interface: None
from FMS USA, Inc.
No programming required. Standardised analogue outputs. Galvanically isolated. DIN rail mount. Gain and offset setting by 20-turn trimmers [See More]
- Signal Conditioning: Instrumentation Amplifier
- Inputs: Bridge Input
- Form Factor: DIN Rail
- Excitation: Voltage
from Stellar Technology
The Series AP5103 DIN-rail Amplifier is a low cost, easy-to-use, general-purpose singlechannel conditioner designed for input of pressure, force, torque, weight, and other variables measured by standard DC-excited strain gage transducers. DIN mount construction gives the user ready access to screw... [See More]
- Signal Conditioning: Bridge Conditioner; Instrumentation Amplifier
- Differential Channels: Yes
- Form Factor: DIN Rail
- Outputs: Analog Voltage Output; Analog Current Output
from Krohn-Hite Corporation
The Krohn-Hite 39000 Hydrophone Analog Signal Conditioning/Filter System provides up to 210 channels of fully programmable hydrophone signal conditioning. The 39000 15-slot rugged mainframe has a variety of high performance filter/amplifier plug-in cards to choose from with characteristics such as... [See More]
- Signal Conditioning: Filter; Instrumentation Amplifier
- Analog Channels: 210
- Form Factor: Rack Mount (optional feature); Stand-alone (optional feature)
- DC Voltage: +/-10 V
from Mad City Labs, Inc.
The PA25 is a single channel amplifier suitable for driving low voltage (150V) piezo actuators. The PA25 amplifier combines low noise and outstanding stability with high power output, making it ideal for open loop, high resolution control of piezos. The PA25 is equipped with a front panel analog... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 1
- Form Factor: Stand-alone
- DC Voltage: 0V to +10V
from Interface, Inc. - AZ
Why the Interface series SCB1 Conditioning Board 1 or 2 Channel is the best in class: Nonlinearity <0.003% full scale. 20-bit resolution. High thermal stability. Shunt calibration, software selectable. Single or dual channel versions. Bipolar. Isolated output [See More]
- Signal Conditioning: Filter; Instrumentation Amplifier; Sample-and-Hold Amplifier; Isolation Amplifier; SigIsol; Millivolt to Analog Converter
- Inputs: mV/V
- Form Factor: PC Board
- Excitation: Voltage
from Campbell Scientific, Inc.
The AVW1 is available as a replacement part or as needed for continuity or compatibility, but we recommend the AVW200-series interfaces for all new applications. The AVW200 interfaces are much more accurate and feature a high degree of noise immunity for your vibrating wire measurements. The AVW1... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 1
- Form Factor: Panel / Chassis Mount
- Inputs: Thermistor Input
from tecsis LP
Features: ± 5/ ± 10 VDC or 4-20 mA standard signal. Direct connection with PLC. Compact shape. Easy handling. Protection type IP 67. Robust aluminium diecasting housing, usable in heavy industry [See More]
- Signal Conditioning: Instrumentation Amplifier
- Excitation: Voltage
- DC Voltage: ±5V/±10V
- Outputs: Analog Voltage Output
from Spectron Glass and Electronics Inc.
The MUPI-2 Universal Signal Conditioner is a self contained, fully functional and adjustable conditioning module. This compact epoxy encapsulated package contains all the electronics and interface circuitry required, to operate any Spectron single axis electrolytic tilt sensor. Utilizing MIL spec... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 1
- Form Factor: PC Board; Stand-alone
- Differential Channels: Yes
from OMEGA Engineering, Inc.
The 2-channel OMB-DBK4 dynamic signal-input card enables OMB-LOGBOOK and OMB-DAQBOARD-2000 Series data acquisition systems to accommodate inputs from piezoelectric transducers, such as accelerometers or microphones, as well as from various other dynamic signal sources. Each OMB-DBK4 card is equipped... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 2
- Form Factor: PC Board
- DC Voltage: +/-5 V
from CAS DataLoggers
The ADS-261 is a battery-powered end node for collecting and transmitting data from bridge strain gauge sensors. It offers a high accuracy bridge instrumentation amplifier input, 1 digital input configurable as a pulse counter input, and multiple excitation options with voltage calibration for... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Inputs: Bridge Input
- Form Factor: Stand-alone
- User Interface: None
from Mahr Inc.
Product features. Output voltage: ± 10 V (Option: ± 5 V / 0 V to 10 V) at the end of the measuring range. Simultaneously the output signal current of ± 5 mA at the end of the measuring range is available. Supply voltage 24 V=. The housing of the 1901 TA is designed for use in... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Outputs: Analog Voltage Output; Analog Current Output
- Analog Channels: 1
- User Interface: None
from FUTEK Advanced Sensor Technology, Inc.
CSG110 , Strain Gage Amplifier , Standard , Enclosed With Din Rail Mount , With DB9 Connectors , ABS-94HB Black Enclosure , Analog Output , +/-5 VDC , +/-10 VDC , 0-20 mA , 4-20 mA , 0-16 mA , 5-25 mA , 1 KHZ Bandwidth [See More]
- Signal Conditioning: Instrumentation Amplifier
- DC Voltage: .5 to 10mV/V nom.
- Form Factor: DIN Rail
- Inputs: Bridge Input
from RESON
The VP1000 is a 1MHz bandwidth single ended voltage preamplifier, designed for use with piezoelectric hydrophone and a variety of transducers. VP1000 offers excellent low-noise performance, gain selection in 6 levels and options of 12 Hi-Pass filters. The high input impedance of 100Mohm allow for... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 1
- Form Factor: Stand-alone
- Digital I/O Channels: 0
from Encore Electronics, Inc.
The Model 176 is a computer-controlled charge amplifier module. It features variable gain and output scaling and will accept differential or single-ended inputs. The following parameters are displayed and adjustable: accelerometer sensitivity, differential or single-ended mode, scaling, filter... [See More]
- Signal Conditioning: Bridge Conditioner; Instrumentation Amplifier
- Inputs: Bridge Input
- Form Factor: PC Board
- Outputs: Analog Current Output
from FMS USA, Inc.
Digital, microprocessor controlled. Top performance at highest speed. 3 programming keys and 2-line LCD. Easy to set up and operate. 3 housing versions. Available as wall, rail and panel mount. Galvanic isolated. Protected against electrical noise. Additional features. Auto-Calibration and -Tare... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 2
- Form Factor: Panel / Chassis Mount; DIN Rail
- Inputs: Bridge Input
from Stellar Technology
Description. The Series AP5201 In-Line Amplifier is a low cost, easy-to-use, general purpose single-channel conditioner designed for input of pressure, force, torque, weight, and other variables measured by conventional DC-excited strain gage transducers. It is ideal for applications where the... [See More]
- Signal Conditioning: Bridge Conditioner; Instrumentation Amplifier
- DC Voltage: 1mV-10V
- Form Factor: Line Mount
- Outputs: Analog Voltage Output; Analog Current Output
from Mad City Labs, Inc.
The PA3 is a three channel amplifier suitable for driving low voltage (150V) piezo actuators. The PA3 amplifier combines low noise and outstanding stability with high power output making it ideal for open loop, high resolution control of piezos. The PA3 includes adjustable feet for desktop use, a... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 3
- Form Factor: Stand-alone
- DC Voltage: 0V to +10V
from Interface, Inc. - AZ
Why the Interface series HRBSC High Resolution Signal Conditioning Board is the best in class: Nonlinearity < 0.001% full scale. 22-bit resolution. High thermal stability. Shunt calibration, software selectable. Auto ID with Gold Standard load cells. ISA slot plug-in board. Bipolar [See More]
- Signal Conditioning: Filter; Instrumentation Amplifier; Sample-and-Hold Amplifier; SigIsol
- Inputs: +/- 4.5 mV/V
- Form Factor: PC Board
- Excitation: Voltage
from Campbell Scientific, Inc.
The AVW100 is available as a replacement part or as needed for continuity or compatibility, but we recommend the AVW200-series interfaces for all new applications. The AVW200 interfaces are much more accurate and feature a high degree of noise immunity for your vibrating wire measurements. The... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 1
- Form Factor: Panel / Chassis Mount
- Inputs: Thermistor Input
from tecsis LP
Features: Rugged in-line amplifier [See More]
- Signal Conditioning: Instrumentation Amplifier
- Excitation: Voltage
- Inputs: Bridge Input
- Outputs: Analog Voltage Output
from Spectron Glass and Electronics Inc.
The MUPI-3 Universal Signal Conditioner is a self contained, fully functional and adjustable conditioning module, with the added ability of scale factor temperature compensation. This compact epoxy encapsulated package contains all the electronics and interface circuitry required, to operate any... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 1
- Form Factor: PC Board; Stand-alone
- Differential Channels: Yes
from OMEGA Engineering, Inc.
The OMB-DBK18 low-pass filter card provides OMEGA ’s OMB-LOGBOOK and OMB-DAQBOARD-2000 Series data acquisition systems with four low-pass filters that can be individually configured for a cut-off frequency from DC to 50 kHz, and for Butterworth, Chebyshev or Bessel characteristics. Each... [See More]
- Signal Conditioning: Filter; Instrumentation Amplifier
- Analog Channels: 4
- Form Factor: PC Board
- Differential Channels: Yes
from Mahr Inc.
Product features. Highly accurate processing of measured values. Zero setting is possible at any point within the measuring range. Actual value of a standard can be acquired at the touch of a button. 2 inputs for Mahr compatible inductive probes for single, sum or difference measurements. [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 2
- Form Factor: Stand-alone
- Digital I/O Channels: 3
from FUTEK Advanced Sensor Technology, Inc.
QIA103, 3 Channels Amplifier Module (Aluminum) , DB15 Female Sensor Connection , Material - 2024-T4 [See More]
- Signal Conditioning: Instrumentation Amplifier
- Application: General Lab & Industrial
from RESON
The VP2000 is a 1MHz bandwidth voltage preamplifier designed for uses in conjunction with piezoelectric hydrophones. VP2000 offers excellent low-noise performance over the entire frequency range; gain selections in 6 levels from 0 to 50dB. A range of 12 high-pass and 12 low-pass filters are... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 1
- Form Factor: Stand-alone
- Digital I/O Channels: 0
from Encore Electronics, Inc.
The Model 664 is a two-channel computer-controlled dynamic strain gage amplifier module. The following parameters are displayed and are adjustable: gain, zero, external cal, filter, excitation and excitation monitor. Each channel has its own isolated constant current excitation source. [See More]
- Signal Conditioning: Bridge Conditioner; Instrumentation Amplifier
- Inputs: Bridge Input
- Form Factor: PC Board
- Excitation: Voltage; Current
from FMS USA, Inc.
Features. Advantages. Digital microprocessor controlled. High performance & speed capability. Up to 4 independent channels. Saves machine space and money. 4 key programming. Easy to setup and operate. BUS interfacing capability. Remote connectability and integration simplicity. Special features... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 1
- Form Factor: Wall Mount
- DC Voltage: 0 to 9 mV
from Stellar Technology
Description. The Series AP5202 is an in-line DC amplifier designed to provide variable bridge excitation and signal conditioning for Stellar Technologies ’ strain gaged, mV/V pressure transducers, load cells, force sensors, and reaction torque transducers. The AP5202 provides up to 10V output... [See More]
- Signal Conditioning: Bridge Conditioner; Instrumentation Amplifier
- DC Voltage: 4mV-10V
- Form Factor: Line Mount
- Outputs: Analog Voltage Output; Analog Current Output
from Interface, Inc. - AZ
Why the Interface series 500 In-Line Signal Conditioner is the best in class: DC powered. ±5 VDC or 4-20 mA. Small size. Ultra-stable electronics. More Information. Small, DC powered in-line signal conditioner with 9-pin connectors, +/-5V and 4-20mA outputs and 1000Hz bandwidth. [See More]
- Signal Conditioning: Filter; Bridge Conditioner; Instrumentation Amplifier; Sample-and-Hold Amplifier
- DC Voltage: +/- 10 mV
- Form Factor: Stand-alone
- Excitation: Voltage; Current
from Campbell Scientific, Inc.
The AVW4 is available as a replacement part or as needed for continuity or compatibility, but we recommend the AVW200-series interfaces for all new applications. The AVW200 interfaces are much more accurate and feature a high degree of noise immunity for your vibrating wire measurements. The AVW4... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 4
- Form Factor: Panel / Chassis Mount
- Inputs: Thermistor Input
from tecsis LP
Features: Example for internal amplifier: XLP58 Pancake Load Cell with 0-5V output. 0-20 mA option available for Current (3-wire) [See More]
- Signal Conditioning: Instrumentation Amplifier
- Excitation: Voltage
- Inputs: Bridge Input
- Outputs: Analog Voltage Output
from Spectron Glass and Electronics Inc.
The SSY0079 Single Axis CMOS Signal Conditioning Module is a DC input/output operated device, which operates off a single ended supply, and provides a bipolar DC output. Specifically designed to interface directly with all Spectron Single Axis Tilt Sensors, and with the SP5000 Series Dual Axis Tilt... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 1
- Form Factor: PC Board
- Differential Channels: Yes
from OMEGA Engineering, Inc.
The DMD Series In-Line Amplifiers convert a mV/V transducer into either a 0-5 Vdc or 4-20 mA output device. They are intended for applications where physical conditions will not allow the amplifier to be integral with the transducer body and must be ordered with a transducer as they are calibrated... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Inputs: Transducer
- Form Factor: Stand-alone
- Outputs: Analog Voltage Output; Analog Current Output
from Mahr Inc.
Product features. High resolution and high contrast color display. The display can be continuously inclined for the ideal field of vision. Simple to operate. Can be operated with batteries or from the main power supply. When battery powered the C 1200 is fully portable. Compact housing. Wall... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 1
- Form Factor: Stand-alone
- Application: General Lab & Industrial
from FUTEK Advanced Sensor Technology, Inc.
QIA117 , In-line Signal Conditioning Amplifier w/ Skydrol Resistant Aluminum Enclosure , PT06A-10-6S-SR Connector on Sensor side w/ 4 ft Teflon Cable , PT02A-10-6P Bendix on Power/Output Side , +/-5 VDC or +/-10 VDC Analog Output [See More]
- Signal Conditioning: Instrumentation Amplifier
- Application: General Lab & Industrial
- Outputs: Analog Voltage Output
from Encore Electronics, Inc.
The Model 665 is a combo computer-controlled static/dynamic strain gage amplifier module. The following parameters are displayed and are adjustable: gain, zero, external cal, filter, excitation and excitation monitor. Each channel has its own isolated constant current excitation source. [See More]
- Signal Conditioning: Bridge Conditioner; Instrumentation Amplifier
- Inputs: Bridge Input
- Form Factor: PC Board
- Excitation: Voltage; Current
from FMS USA, Inc.
Features. Advantages. IP67 aluminium housing. Can be used in harsh enviroments. No programming required. Easy to setup. Standardised analogue outputs. Multiconnectable with PLC, display etc. Galvanically isolated. Protected against electrical noise [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 1
- Form Factor: Connectorized
- Inputs: Bridge Input
from Stellar Technology
Description. The AP5101 Series is a DIN-rail mounted single channel DC amplifier designed to provide variable excitation and signal conditioning for Stellar Technology ’s strain gaged, mV/V, pressure transducers, load cells, force sensors, and reaction torque sensors. This DIN-rail amplifier... [See More]
- Signal Conditioning: Instrumentation Amplifier
- DC Voltage: 4mV-10V
- Form Factor: DIN Rail
- Outputs: Analog Voltage Output; Analog Current Output
from OMEGA Engineering, Inc.
The OMEGA ® FLSC-AMP amplifies the low level signals from the magnetic pickup of gear teeth or flow transmitters by a factor of more than a hundred times to drive any OMEGA ® ratemeter, counter or controller. It is mounted in a rugged 2 x 3" metal housing with screw terminals for easy... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Frequency: 0-15 kHz
- Form Factor: Metal Housing
- Outputs: Frequency or Pulse Output
from Mahr Inc.
Product features. Background lit LCD-Display with an analog and a two line digital display. 5 three color status lamps for warning and tolerances limits. Up to 2 features can be simultaneously displayed. Additional resolution 0.01 µm / 1 µin at measuring ranges from ±200 µm. [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 2
- Form Factor: Stand-alone
- Digital I/O Channels: 3
from Encore Electronics, Inc.
The Model 619M is a low cost differential amplifier useful in test environments where high CMRR is desired. Encore's Model 227. F/V converter can also be used in the six-module 4015-111 rack. An. AC power supply is built into the rack, and provides the required unregulated DC voltages to operate the... [See More]
- Signal Conditioning: Instrumentation Amplifier
- DC Voltage: +/- 10 V Max
- Form Factor: Rack Mount
- User Interface: Front Panel
from FMS USA, Inc.
The EMGZ321, a left/right strain gauge amplifier, measures the material tension on both sides of the roller independently. Thus it is possible to monitor the load distribution over the measuring roller with great accuracy. This high-grade product comes as a plug & play unit and is easy to setup. [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 2
- Form Factor: Panel / Chassis Mount; DIN Rail
- DC Voltage: 0 to 9 mV
from Stellar Technology
The AP5102 Series is a DIN-rail mounted signal conditioner for use with LVDT's (linear variable differential transformer) requiring AC excitation and synchronous demodulation. The AP5102 produces outputs of 0-10 Vdc, ±10 Vdc, or 4-20 mA. One of the key features of this DIN-rail amplifier is... [See More]
- Signal Conditioning: Bridge Conditioner; Instrumentation Amplifier
- Outputs: Analog Voltage Output; Analog Current Output
- Form Factor: DIN Rail
- User Interface: None
from OMEGA Engineering, Inc.
The LDX-2 linear displacement transmitter is a two-wire, 4 to 20 mA conditioner for ac LVDT transducers. It is designed for use where long transmission distances are required before the signal can interface with a controller or meter. A feature of two-wire operation is its low susceptibility to... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Inputs: LVDT; Transducer
- Form Factor: DIN Rail
- Excitation: Voltage
from Mahr Inc.
Product features. Analog indicator instrument for display of measurement values. Two-line LCD for measuring values and help texts. 5 three color status lamps for warning and tolerance limits. Up to 3 features can be simultaneously displayed. 2 input modules can be inserted into base unit. Following... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 8
- Form Factor: Stand-alone
- Digital I/O Channels: 6
from Encore Electronics, Inc.
The Model FL651 Differential Amplifier is a minimal-feature fixed gain amplifier module. Differential input signals up to ±10V are buffered to the output terminal. The unit is mechanically and electrically compatible with Encore's other Flexi-line DIN-rail mounted instrumentation. [See More]
- Signal Conditioning: Instrumentation Amplifier
- DC Voltage: +/- 10 V Peak
- Form Factor: DIN Rail
- Outputs: Analog Voltage Output
from FMS USA, Inc.
Features. Advantages. Microprocessor controlled. High performance and speed. Functions parameterized via PROFIBUS ®. Easy set-up and programming. IP 67 aluminium housing. Can be used in harsh environments. Galvanically isolated. Protected against electrical noise [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 2
- Form Factor: Connectorized
- DC Voltage: 0 to 7.2 mV
from Stellar Technology
The Series AP5104 DIN-rail Amplifier is a high reliability conditioner for measurement of displacement with an LVDT (linear variable differential transformer). It can be used with 4, 5, and 6-wire LVDT ’s. The AP5104 provides regulated AC excitation with remote sensing for applications which... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Excitation: Voltage
- Form Factor: DIN Rail
- Outputs: Analog Voltage Output; Analog Current Output
from OMEGA Engineering, Inc.
The LDX-4 is a dc powered signal conditioning amplifier and power supply for ac LVDT's. Its compact, rugged case can withstand industrial installations and protect laboratory grade electronics. Complete zero and span adjustments allow the LDX-4 to be used with any LVDT with an output between 45 and... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Excitation: Voltage; Current
- Form Factor: Stand-alone
- Outputs: Analog Voltage Output; Analog Current Output
from Mahr Inc.
Product features. Easy to read 3 color analog display. Measurement in conjunction with inductive probes (e. g. Mahr P2004) or electronic plug gages etc. Two inputs for inductive probes (compatible with probes from Mahr, Mahr-Federal, Tesa). Extensive calculation of input signals: ±A,... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 2
- Form Factor: Stand-alone
- DC Voltage: 24 V
from Encore Electronics, Inc.
The Model 5020-102 rack adapter offers complete remote control of all signal conditioner settings through an industry-standard Ethernet interface and remote web browser. No additional software needs to be installed to operate the system. In addition, the rack can be controlled by other software... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Inputs: Accelerometer Input (optional feature); Bridge Input
- Form Factor: Rack Mount
- User Interface: Computer Programmable
from FMS USA, Inc.
Features. Advantages. Microprocessor controlled. High performance and speed. Functions parameterized via PROFIBUS ®. Easy set-up and programming. IP67 aluminium housing. Can be used in harsh environments. Galvanically isolated. Protected against electrical noise [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 2
- Form Factor: Connectorized
- DC Voltage: 0 to 7.2 mV
from Stellar Technology
The Series AP50XX is a reliable, rugged signal conditioner. with a variety of acceptable inputs and available outputs. The. unit is enclosed in a stainless steel housing and is protected. against environmental conditions including vibration. Options. include a variety of electical terminations, EMI... [See More]
- Signal Conditioning: Bridge Conditioner; Instrumentation Amplifier
- Outputs: Analog Voltage Output; Analog Current Output
- Form Factor: Line Mount
- User Interface: None
from OMEGA Engineering, Inc.
OMEGA ’s Model FLSC-AMP-A amplifies the low level sine wave signals from a magnetic pickup sensor to a high level square wave output directly proportional in amplitude to the power supply voltage powering the module. This amplified signal will drive any ratemeter, totalizer, counter, or batch... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Frequency: 0-20 kHz
- Form Factor: Plastic Housing
- Outputs: Frequency or Pulse Output
from Encore Electronics, Inc.
The Model 663 is a combination amplifier and integrator for accelerometer signals. One integration stage is provided, converting acceleration into velocity. The unity gain frequency of the integrator is factor-trimmed to 60Hz. Two outputs are provided per accelerometer –a buffered copy of the... [See More]
- Signal Conditioning: Instrumentation Amplifier
- DC Voltage: 0 To +/- 10 V Max
- Form Factor: Rack Mount
- Outputs: Analog Voltage Output
from FMS USA, Inc.
Features. Advantages. Microprocessor controlled. High performance & speed capability. All functions can be parametrized by PROFIBUS ®. Easy setup and programming. Compact design, DIN rail. Saves cabinet space and money. Galvanically isolated. Protected against electrical noise. Low space... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 2
- Form Factor: Connectorized
- DC Voltage: 0 to 7.2 mV
from OMEGA Engineering, Inc.
bull; Send pH Electrode Signal 1,000 Feet Over Ordinary, Wire and Connectors or Coaxial Cable. • Interface pH Electrodes Directly with Inexpensive mV Meters and Recorders or Sophisticated Process Controllers and Data Acquisition Systems. • Extend Useful Life of pH Electrodes. •... [See More]
- Signal Conditioning: Instrumentation Amplifier
- Analog Channels: 1
- Form Factor: Panel / Chassis Mount
- Inputs: pH Electrode
from Encore Electronics, Inc.
The Model FL639 strain gage amplifier is a low-priced, compact bridge amplifier, complete with voltage and current excitation, adjustable gain, zero, and bridge balance, lowpass filtering, and shunt calibration. The unit is mechanically and electrically compatible with Encore's other Flex-line... [See More]
- Signal Conditioning: Bridge Conditioner; Instrumentation Amplifier
- Inputs: Bridge Input
- Form Factor: DIN Rail
- Excitation: Voltage; Current