Steel Washers
from Nord-Lock Group
Nord-Lock combi bolt washers are specifically designed to be permanently attached to a bolt (SEMS), providing an additional layer of security to applications. The standard range of Nord-Lock combi bolt washers consists of NL5 - NL12 in steel material. Complete combi bolts, including Nord-Lock combi... [See More]
- Material: Steel
- Washer Type: Wedge Locking
from RS Components, Ltd.
Grounding Washer Kit, M4, 100 Pcs [See More]
- Material: Steel; Steel
- Washer Type: Grounding Washer
from Stock Drive Products & Sterling Instrument - SDP/SI
Industrial fasteners are hardware devices that join two or more items together, creating a semi-permanent or permanent connection. The fasteners most frequently used by machinery designers are screws, nuts, retaining rings, and various types of pins because of the basic role that they play in the... [See More]
- Material: Steel; Alloy Steel, Black Oxide
- Number Size: No. 0
- Washer Type: Lockwasher, Helical Spring
- Inside Diameter: 0.062
from ZAGO Manufacturing Company, Inc.
ZAGO MIL-DTL-5423 PANEL BUSHING SEALS; PERFECT FOR PROTECTING TOGGLE SWITCHESZAGO panel bushing seals: Prevent toggle switches from being damaged by contaminants, i.e., air, saltwater, precipitation, dust, dirt, oil, bacteria, and moisture Meet Mil-DTL-5423 Molded from silicone rubber that has a... [See More]
- Material: Steel; Rubber
- Washer Type: Self-sealing
from Zhejiang Lisheng Spring Co., Ltd.
Multi-turn Wave Springs Wavy Compression Springs with shim ends OD40mm. Description: A multi turn shim end wave spring, also known as a coiled wave spring or microwave spring, is a spring made up of pre-hardened flat wire in a process called on-edge coiling (also known as edge-winding). During this... [See More]
- Material: Nickel Alloy; Steel; StainlessSteel
- Washer Type: Wave
from Imao-Fixtureworks
Features. The built-in bearing provies smooth tightening. Using the Bearing Washer allows increasing clamping force by 50%. Body. Steel (SUJ2). Black oxide finished [See More]
- Material: Steel
- Outside Diameter: 0.945 to 1.378
- Metric Size: M6; M8; M10; M12
- Thickness: 0.315
from Smalley
Conventional Gap and Overlap Type Wave Springs are used in a wide variety of applications. For short deflections and low-medium forces, they function with precision and dependability. These two types of Smalley Wave Springs permit radial expansion or growth in diameter within a cavity, without the... [See More]
- Material: Steel; StainlessSteel; Spring Steel
- Inside Diameter: 9.416
- Washer Type: Wave
- Outside Diameter: 10.236
from Jergens, Inc.
Jergens Equalizing Swing C Assembly Washers have a concave center for self-locating around the stud, which prevents creeping while tightening, and allows acceptance of the mating spherical flange nuts. The spherical flange nut assures that the washer cannot back out either during clamping or due to... [See More]
- Material: Steel; Low Carbon Steel
- Number Size: 3/8"
- Washer Type: C-Washer
- Finish: BlackOxide
from ODG (Origin Data Global)
WASHER FLAT #4 STEEL [See More]
- Material: Steel
- Outside Diameter: 0.219
- Inside Diameter: 0.125
from Keystone Electronics Corp.
Part Number: 4703. "ID": .200 [5.1]. Material: Steel. OD: .437 [11.1]. Style: Flat. Thickness: .033 [.84]. Type: Washer [See More]
- Material: Steel
- Inside Diameter: 0.200
- Washer Type: Flat or USS
- Outside Diameter: 0.437
from SPIROL
Disc springs are conically-shaped, washer-type components designed to be axially loaded. What makes disc springs unique is that based on the standardized calculations of DIN EN 16984 (formerly DIN 2092), the deflection for a given load is predictable and the minimum life cycle can be determined. [See More]
- Material: Steel; HardenedSteel; Spring Steel
- Inside Diameter: 0.126 to 4.016
- Washer Type: Conical
- Outside Diameter: 0.315 to 7.874
from DigiKey
"#4 Flat Washer 0.032"" (0.81mm) Thick Steel Zinc" [See More]
- Material: Steel
- Number Size: No. 4
- Washer Type: Flat or USS
- Finish: ZincPlated
from Nord-Lock Group
Nord-Lock steel construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications and to fit HV/HR sets bolts and nuts in accordance to the European standard EN 14399-3/EN 14399-4 /EN 14399-8.In order to ensure an optimal contact surface between the... [See More]
- Material: Steel
- Metric Size: M12 (optional feature); M14 (optional feature); M16 (optional feature); M20 (optional feature); M24 (optional feature); M30 (optional feature); M36 (optional feature)
- Washer Type: Wedge Locking
from RS Components, Ltd.
ISO metric zinc plated steel washer kit [See More]
- Material: Steel; Steel
- Finish: ZincPlated
- Washer Type: Lockwasher, Internal Tooth; Internal Tooth, Plain, Spring
from Stock Drive Products & Sterling Instrument - SDP/SI
Industrial fasteners are hardware devices that join two or more items together, creating a semi-permanent or permanent connection. The fasteners most frequently used by machinery designers are screws, nuts, retaining rings, and various types of pins because of the basic role that they play in the... [See More]
- Material: Steel; Zinc Plated Steel
- Inside Diameter: 0.106
- Washer Type: Flat or USS
- Outside Diameter: 0.236
from ZAGO Manufacturing Company, Inc.
Environmental elements can easily make their way into the inner parts of sensitive electronic devices. However, with ZAGO ’s panel bushing seals, you can control potential leaks with the most easy to use and economical product on the market. ZAGO ’s panel bushing seals are composed of a... [See More]
- Material: Steel; StainlessSteel
- Number Size: No. 0; No. 1; No. 2; No. 4; No. 6; No. 8; No. 10; No. 12; 1/4"; 5/16"; 3/8"; 7/16"; 1/2"; 5/8"; 3/4"
- Washer Type: Self-sealing
- Metric Size: M1.6; M2.0; M2.5; M3; M3.5; M4; M5; M6; M8; M10; M12; M14; M16; M20; M24; M30
from Zhejiang Lisheng Spring Co., Ltd.
Carbon Stainless Steel Multy Turn Wave Spring Specification Table 17-7ph Carbon / Stainless Steel. Description: Carbon stainless steel multy turn wave springs are made of a single filament of round-edged, pre-tempered flat wire from a continuous coil. This results in uniform diameters and wave... [See More]
- Material: Nickel Alloy; Steel; StainlessSteel
- Washer Type: Wave
from Imao-Fixtureworks
Material: S45C steel. Heat Treat: Quenched and tempered. Finish: Black oxide [See More]
- Material: Steel
- Inside Diameter: 0.252 to 0.827
- Washer Type: Flat or USS
- Outside Diameter: 0.394 to 1.969
from Jergens, Inc.
Jergens Flat Washers incorporate spacing and distribute load when placed between a nut and bolt or screw. They will help prevent wear and distortion of installation surfaces over time. Features, Benefits, & Product Specifications: Material: Available in 1010 Cold Rolled Steel and 303 Stainless... [See More]
- Material: Steel; StainlessSteel; Available in 1010 Cold Rolled Steel and 303 Stainless Steel
- Finish: BlackOxide
- Washer Type: Flat or USS
from Keystone Electronics Corp.
Part Number: 7230-1. Finish/Plating: Zinc & Yellow Chromate. Hole Size: #4, M3. Material: Steel. OD: .220 [5.6]. Style: Flat. Thickness: .032 [.81]. Type: Washer [See More]
- Material: Steel
- Outside Diameter: 0.220
- Washer Type: Flat or USS
- Thickness: 0.032
from SPIROL
Cost-Effective Solutions in High-Wear Applications. SPIROL precision-engineered thrust washers feature less wear and longer life for reduced serviceability costs in a variety of high-wear applications including heavy equipment, automotive, transmission, and industrial power generation. SPIROL... [See More]
- Material: Steel
- Inside Diameter: 0.250
- Washer Type: Flat or USS
- Outside Diameter: 8.000
from DigiKey
"1/4"" Flat Washer 0.090"" (2.29mm) Thick Steel Zinc" [See More]
- Material: Steel
- Finish: ZincPlated
- Washer Type: Flat or USS
from RS Components, Ltd.
BZP Steel Metric Mudguard Washer Kit [See More]
- Material: Steel; Steel
- Outside Diameter: 0.787 to 1.969
- Washer Type: Mudguard
- Finish: Galvanized
from Stock Drive Products & Sterling Instrument - SDP/SI
Industrial fasteners are hardware devices that join two or more items together, creating a semi-permanent or permanent connection. The fasteners most frequently used by machinery designers are screws, nuts, retaining rings, and various types of pins because of the basic role that they play in the... [See More]
- Material: Steel; Zinc Plated Steel
- Inside Diameter: 0.209
- Washer Type: Flat or USS
- Outside Diameter: 0.394
from Zhejiang Lisheng Spring Co., Ltd.
Multi Wave Springs Wave Compression Springs with shim ends calculation. Description: A wave spring, also known as coiled wave spring or scrowave spring, is a spring made up of pre-hardened flat wire in a process called on-edge coiling (also known as edge-winding). During this process, waves are... [See More]
- Material: Steel; StainlessSteel
- Washer Type: Wave
from Imao-Fixtureworks
Features. Cap that keeps corrosion and dirt out of the hex socket of socket-head cap screws.Can be used repeatedly.Designed for installation and removal with a screwdriver or the like. [See More]
- Material: Steel
- Inside Diameter: 0.252 to 0.984
- Washer Type: Spherical
- Outside Diameter: 0.512 to 1.732
from Jergens, Inc.
Jergens Heavy Duty Flat USAE ™ Washers are a simple but effective idea that is long overdue. The outside diameter conforms to USS standards and the inside diameter conforms to SAE standards. The small inside diameter provides a more precise fit on bolts, studs, etc. These washers are up to 37%... [See More]
- Material: Steel; Mild Steel
- Number Size: 1/4"
- Washer Type: Flat or USS
- Inside Diameter: 0.281
from Keystone Electronics Corp.
Part Number: 1476. "ID": .260 [6.6]. Material: Steel. OD: .480 [12.2]. Style: Locking. Thickness: .074 [1.9]. Type: Washer [See More]
- Material: Steel
- Inside Diameter: 0.260
- Washer Type: Lockwasher, Helical Spring
- Outside Diameter: 0.480
from DigiKey
"1/2"" Flat Washer 0.120"" (3.05mm) Thick Steel Zinc" [See More]
- Material: Steel
- Finish: ZincPlated
- Washer Type: Flat or USS
from RS Components, Ltd.
Anti-vibration locking Washer kit [See More]
- Material: Steel; Steel
- Inside Diameter: 0.134 to 0.843
- Washer Type: Wedge Lock
- Outside Diameter: 0.276 to 1.209
from Zhejiang Lisheng Spring Co., Ltd.
MultiWave wavy Springs Compression Springs with plain ends manufacturers. Description: Alloy multi turn wave springs are made of a single filament of round-edged, pre-tempered flat wire from a continuous coil. This results in uniform diameters and wave heights. They replace conventional round wire... [See More]
- Material: Nickel Alloy; Steel; StainlessSteel
- Washer Type: Wave
from Imao-Fixtureworks
Washer. Steel (S50C). Black oxide finish. Heat treated to Rc39-45. Shoulder Screw. Shoulder Screw. Black oxide finish. Heat treated to Rc33-39 [See More]
- Material: Steel
- Thickness: 0.236 to 0.315
- Metric Size: M6; M8
- Finish: BlackOxide
from Jergens, Inc.
Jergens Heavy Duty Flat Washers are made from high-carbon through-hardened steel, which makes them up to 50% stronger than standard heavy-duty washers. Also more fracture-resistant under heavy loads. Features, Benefits, & Product Specifications: Material: High Carbon Steel. Finish: Black Oxide. [See More]
- Material: Steel; High Carbon Steel
- Number Size: 1/2"
- Washer Type: Flat or USS
- Finish: BlackOxide
from Keystone Electronics Corp.
Part Number: 7230-2. "ID": .177 [4.5]. Finish/Plating: Zinc & Yellow Chromate. Material: Steel. OD: .210 [5.3]. Style: Locking. Thickness: .050 [1.3]. Type: Washer [See More]
- Material: Steel
- Inside Diameter: 0.177
- Washer Type: Lockwasher, Helical Spring
- Outside Diameter: 0.210
from DigiKey
Split Lock Washer Thick Steel Zinc [See More]
- Material: Steel
- Finish: ZincPlated
- Washer Type: Lockwasher, Helical Spring
from RS Components, Ltd.
M5 Form C Washer [See More]
- Material: Steel; Steel
- Metric Size: M5
- Washer Type: Plain
- Inside Diameter: 0.209
from Zhejiang Lisheng Spring Co., Ltd.
Multy-turn wave spring with Shim Ends 17-7ph Carbon / Stainless Steel. Description: Multy turn wave spring with shim ends are made of a single filament of round-edged, pre-tempered flat wire from a continuous coil. This results in uniform diameters and wave heights. They replace conventional round... [See More]
- Material: Steel; StainlessSteel
- Washer Type: Wave
from Jergens, Inc.
Jergens Heavy Duty Square Washers incorporate spacing and distribute load when placed between a nut and bolt or screw. They will help prevent wear and distortion of installation surfaces over time. Features, Benefits, & Product Specifications: Material: 1018 Steel. Finish: Black Oxide. Heat... [See More]
- Material: Steel; 1018 Steel
- Number Size: 5/16"
- Washer Type: Square or Rectangle
- Thickness: 0.188
from DigiKey
"Split Lock Washer 0.047"" (1.19mm) 3/64"" Thick Steel Zinc" [See More]
- Material: Steel
- Finish: ZincPlated
- Washer Type: Lockwasher, Helical Spring
from RS Components, Ltd.
M6 Form C Washer [See More]
- Material: Steel; Steel
- Metric Size: M6
- Washer Type: Plain
- Inside Diameter: 0.252
from Zhejiang Lisheng Spring Co., Ltd.
Description: Application “FK6 ASD ” Outside clamping double sealing ring (2 rings = 1 set) In contrast to the single wound laminar seal ring “FK 3 ”, “FK6 ” laminar sealing rings are double wound. They are used as grease seals for roller and plain bearings. They... [See More]
- Material: Steel; StainlessSteel
- Washer Type: Laminar Seal
from Jergens, Inc.
Self Aligning Washers (2 Piece). Jergens Self Aligning Washers are ideally suited for joining machine sections that are out of parallel. They adjust themselves for a positive, firm base. With radius “E ” and the angular 14 ° combination, line contact is formed around the two mating... [See More]
- Material: Steel; StainlessSteel; Available in Low Carbon Steel and 303 Stainless Steel
- Finish: BlackOxide
from DigiKey
"5/16"" Split Lock Washer 0.047"" (1.19mm) 3/64"" Thick Steel Zinc" [See More]
- Material: Steel
- Finish: ZincPlated
- Washer Type: Lockwasher, Helical Spring
from RS Components, Ltd.
M8 Form C Washer [See More]
- Material: Steel; Steel
- Metric Size: M8
- Washer Type: Plain Form C
- Inside Diameter: 0.331
from Zhejiang Lisheng Spring Co., Ltd.
Description: Double turn laminar sealing rings “FK6 ASKD ” are used as a grease seal for roller and plain bearings and they protect, if greased, against grease leakage as well as against dust, dirt and splash water ingress, especially if the sealing requirements are high. Due to the... [See More]
- Material: Steel
- Washer Type: Laminar Seal
from DigiKey
"Flat Washer 0.094"" (2.39mm) 3/32"" Thick Steel Zinc" [See More]
- Material: Steel
- Finish: ZincPlated
- Washer Type: Flat or USS
from RS Components, Ltd.
M10 Form C Washer [See More]
- Material: Steel; Steel
- Metric Size: M10
- Washer Type: Plain
- Inside Diameter: 0.413
from Zhejiang Lisheng Spring Co., Ltd.
Description: Application “FK6 ASD ” Outside clamping double rings (2 rings = 1 set) In contrast to the single wound laminar sealing rings “FK 3 ”, “FK6 ” double turn laminar sealing rings are double wound. They are used as grease seals for roller and plain... [See More]
- Material: Steel
- Washer Type: Laminar Seal
from DigiKey
"#4 Flat Washer 0.025"" (0.64mm) Thick Steel Zinc" [See More]
- Material: Steel
- Number Size: No. 4
- Washer Type: Flat or USS
- Finish: ZincPlated
from RS Components, Ltd.
M12 Form C Washer [See More]
- Material: Steel; Steel
- Metric Size: M12
- Washer Type: Plain
- Inside Diameter: 0.512
from Zhejiang Lisheng Spring Co., Ltd.
Description: Application “FK3 ASK ” Outside clamping combined single laminar rings (5 rings = 1 set) Single wound laminar sealing rings “FK3 ASK ” are used as a grease seal for roller and plain bearings and they protect, if greased, against dust entry and ambient moisture. [See More]
- Material: Steel
- Washer Type: Laminar Seal
from DigiKey
"#4 Split Lock Washer 0.031"" (0.79mm) 1/32"" Thick Steel Zinc" [See More]
- Material: Steel
- Number Size: No. 4
- Washer Type: Lockwasher, Helical Spring
- Finish: ZincPlated
from RS Components, Ltd.
M16 Form C Washer [See More]
- Material: Steel; Steel
- Metric Size: M16
- Washer Type: Plain
- Inside Diameter: 0.669
from Zhejiang Lisheng Spring Co., Ltd.
Linear wave spring expanders are Carbon steel or Stainless Steel. Description: A linear wave spring is a continuous wave forming in the shape of a long strip spring. A load-bearing device has roughly the same load and deflection characteristics. Compared with stamping springs, linear springs use... [See More]
- Material: Nickel Alloy; Steel; StainlessSteel
- Washer Type: Wave
from DigiKey
Flat Washer Thick Steel Zinc [See More]
- Material: Steel
- Finish: ZincPlated
- Washer Type: Flat or USS
from RS Components, Ltd.
M20 Form C Washer [See More]
- Material: Steel; Steel
- Metric Size: M20
- Washer Type: Plain
- Inside Diameter: 0.827
from Zhejiang Lisheng Spring Co., Ltd.
Custom High Precision Stainless Steel Serpentine Square Wire Wave Spring Wave Disc Spring. Description: Multi turn wave springs, also known as coiled wave spring or scrowave spring, is a spring made up of pre-hardened flat wire in a process called on-edge coiling (also known as edge-winding). During... [See More]
- Material: Nickel Alloy; Steel; StainlessSteel
- Washer Type: Wave
from DigiKey
"#6 Split Lock Washer 0.033"" (0.84mm) Thick Steel Zinc" [See More]
- Material: Steel
- Number Size: No. 6
- Washer Type: Lockwasher, Helical Spring
- Finish: ZincPlated
from RS Components, Ltd.
M5 Form B Washer [See More]
- Material: Steel; Steel
- Metric Size: M5
- Washer Type: Plain
- Inside Diameter: 0.209
from Zhejiang Lisheng Spring Co., Ltd.
Nested Wave Spring supplier Carbon/stainless steel/17-7PH(SUS631). Description: Nested wave springs are pre-stacked in parallel from one continuous filament of flat wire. The need to stack individual springs for higher loads is no longer necessary. Nested springs result in a spring rate that... [See More]
- Material: Steel; StainlessSteel
- Washer Type: Wave
from DigiKey
"#10 Flat Washer 0.033"" (0.84mm) Thick Steel Zinc" [See More]
- Material: Steel
- Number Size: No. 10
- Washer Type: Flat or USS
- Finish: ZincPlated
from Century Spring Corp.
A disc spring (sometimes called a "Belleville washer" after the inventor) consists primarily of a convex disc supported at the outer periphery by one force and an opposing force on the center of the disc. Disc springs are used singly, or in stacks, to achieve a desired load and travel. The advantage... [See More]
- Material: Steel; C1075 Steel
- Inside Diameter: 0.563
- Washer Type: Ball Bearing Disc Spring
- Outside Diameter: 1.012
from ASRaymond
Stock sizes in music wire and stainless steel. Precision engineered curved washers are available from Associated Spring in many stock sizes. These washers are made of finely tempered spring steel with some sizes being made of stainless steel. They come deburred and have had all set removed during... [See More]
- Material: Steel
- Inside Diameter: 0.174
- Washer Type: Bowed or Curved
- Outside Diameter: 0.370
from Bayou City Bolt & Supply Co., Inc.
A nut is a type of fastener with a threaded hole. Nuts are almost always used opposite a mating bolt to fasten parts together. The two components work together by a combination of friction between the threads, a slight stretch of the bolt, and compression of the mating parts. Nuts are graded with... [See More]
- Material: Steel; HardenedSteel
- Number Size: 1/4"; 5/16"; 3/8"; 7/16"; 1/2"; 9/16"; 5/8"; 3/4"; 7/8"; 1"; 1-1/8"; 1-14"; 1-1/2"
- Washer Type: Lockwasher, External Tooth; Lockwasher, Helical Spring; Lockwasher, Internal Tooth
- Inside Diameter: 0.260 to 1.534
from Ebinger Manufacturing Corp.
SQUARE TYPE. ASTM A575-81 STEEL MATERIAL. ZINC PLATED FINISH. 1-5/8 INCH. 1-5/8 INCH. 9/16 INCH DIA HOLE SIZE. 1/2 INCH-13 TPI BOLT/ROD SIZE. PACKAGING QUANTITY 100 PER BOX [See More]
- Material: Steel
- Inside Diameter: 0.562
- Washer Type: Channel Washer
- Finish: ZincPlated
from RAF Electronic Hardware
Washer For Panel Screw - Style 5 [See More]
- Material: Steel
- Washer Type: Panel Screw Washer For Screw Style5
from L.H. Dottie Company
STEEL MATERIAL. ZINC PLATED FINISH. 1/2 INCH INNER DIAMETER. 1-1/2 INCH OUTER DIAMETER. PC 4110 MODEL [See More]
- Material: Steel
- Inside Diameter: 0.500
- Washer Type: Fender
- Outside Diameter: 1.500
from Hi-Tech Seals, Inc.
Washers are typically used to distribute the weight and pressure that the bolt exerts. Many of Hi-Tech Seals washers also seal between the bolt and the surface. [See More]
- Material: Steel; Nitrile
- Washer Type: Self-sealing
from Minerallac Company
STEEL MATERIAL. ZINC PLATED FINISH. 1/8 INCH INNER DIAMETER. 1 INCH OUTER DIAMETER. 0.047 TO 0.08 INCH THICKNESS. PACKAGING QUANTITY 100 PER BOX [See More]
- Material: Steel
- Inside Diameter: 0.125
- Washer Type: Fender
- Outside Diameter: 1.000
from Fastener SuperStore, Inc.
5/8 X 2 Fender Washers / Steel / Zinc. Fender Washers are wider and thinner than standard USS and SAE Flat Washers. [See More]
- Material: Steel
- Number Size: 5/8"
- Washer Type: Fender
- Inside Diameter: 0.688
from LADD Distribution
Lockwasher [See More]
- Material: Steel
- Special Fitting Configuration: Not Applicable
- Washer Type: Wave
from Carr Lane Manufacturing Co.
Washer that slides in and out of position for clear loading. Can be used with a nut, or by sliding it into a radial groove on a drawbar. Available in steel or stainless steel. [See More]
- Material: Steel
- Number Size: No. 10 (optional feature); 1/4" (optional feature); 5/16" (optional feature); 3/8" (optional feature); 1/2" (optional feature); 5/8" (optional feature); 3/4" (optional feature); 1" (optional feature)
- Washer Type: C-Washer
- Metric Size: M5 (optional feature); M6 (optional feature); M8 (optional feature); M10 (optional feature); M12 (optional feature); M16 (optional feature); M24 (optional feature)
from Maryland Precision Spring, an MW Industries Company
Our Maryland Precision Spring location has been a custom manufacturer of Belleville disc springs & stacks, constant & variable force springs, motor & power springs, retail PoP pushers, reel retrievers, light stampings, and electrical assemblies since 1972. A leading supplier in the Point of... [See More]
- Material: Copper Alloy; Brass; Copper; Steel; Inconel, Silver; Spring Steel
- Inside Diameter: 0.013 to 1.016
- Washer Type: Belleville; Conical
- Outside Diameter: 0.250 to 10.000
from Ford Fasteners, Inc.
EPDM Bonded Sealing Washers [See More]
- Material: Steel
- Number Size: No. 10
- Washer Type: Self-sealing
- Outside Diameter: 0.500
from Atkore International
SPLIT TYPE. MILD STEEL MATERIAL. ELECTROGALVANIZED FINISH. CASE HARDENED, MACHINED PROCESS. ASTM A576 GR A1015 MATERIAL SPECIFICATION. 5/8 INCH FASTENER SIZE. UNISTRUT[R] BRAND. WEIGHT 2.2 LB PER 100 PIECES [See More]
- Material: Steel
- Number Size: 5/8"
- Washer Type: Lockwasher, Helical Spring
- Finish: Galvanized
from Bridgeport Fittings, Inc.
STEEL MATERIAL. GALVANIZED FINISH. 7/8 INCH INNER DIAMETER. 1-1/2 INCH OUTER DIAMETER. UL 514B, CSA APPROVAL. 3/4 INCH X 1/2 INCH TRADE SIZE. RIGID, IMC CONDUIT TYPE. ROHS COMPATIBLE. APPLICABLE STANDARD FEDERAL SPECIFICATION A-A-50553, NEMA FB-1 [See More]
- Material: Steel
- Inside Diameter: 0.875
- Washer Type: Reducing Washer
- Outside Diameter: 1.500
from PHD Manufacturing, Inc.
LOW CARBON STEEL MATERIAL. ELECTROGALVANIZED FINISH. 13/32 INCH INNER DIAMETER. 1-1/2 INCH OUTER DIAMETER. .40625 INNER DIAMETER - DECIMAL. 1.5 OUTER DIAMETER - DECIMAL. 13/32 INNER DIAMETER - FRACTIONAL. 1-1/2 OUTER DIAMETER - FRACTIONAL. 3/8 INCH FASTENER SIZE. WEIGHT 0.03 LB. INNER DIAMETER -... [See More]
- Material: Steel
- Inside Diameter: 0.406
- Washer Type: Fender
- Outside Diameter: 1.500
from DME Company
Belleville Washer [See More]
- Material: Steel
- Metric Size: M14
- Washer Type: Belleville; Spherical
- Inside Diameter: 0.323 to 1.000
from American Belleville
American Belleville washers hold your bolted joint tight in the face of the most extreme cases of differential thermal expansion/contractionn, bolt creep and vibration that threaten the integrity of the joint. We specialize in high-temperature applications and the most corrosive environments where... [See More]
- Material: Steel; 1074 High-Carbon Steel Alloy, 0.018" Thick
- Number Size: 1/4"
- Washer Type: Belleville
- Inside Diameter: 0.255
from Rolex Spring, A Division of MW Industries
NDS Series flange springs are used to fill the application needs similar to those described for the FL and MFL series springs. However, they are primarily designed to handle applications demanding much higher load and / or temperature. NDS parts are normally made from H11/H13 steel and can produce... [See More]
- Material: Steel
- Number Size: 3/4" (optional feature); 7/8" (optional feature); 1" (optional feature); 1-1/8" (optional feature); 1-14" (optional feature); 1-3/8" (optional feature); 1-1/2" (optional feature); 1-5/8" (optional feature); 1-3/4" (optional feature); 1-7/8" (optional feature); 2" (optional feature)
- Washer Type: Belleville
- Inside Diameter: 0.773 to 3.031
from J. W. Winco, Inc.
Specification. Washer body: Steel, turned. Type BT - Blackened finish. Type ZB - Zinc plated, blue passivated. All types available with cylindrical bore (Type A) or bore for countersunk screw (Type B). Information. GN 6341 washers are used mainly in mechanical machine and jig construction when DIN... [See More]
- Material: Steel
- Washer Type: Countersunk or Finishing
from TFC Ltd.
Dimensions: Imperial. Material: Steel. Finish: Zinc & Colour / Self Colour [See More]
- Material: Steel
- Finish: ZincPlated
from NBK America LLC
There is a variety of outside diameters and thickness relative to normal plain washers. For securing seating surface on the long hole position and engagement of materials with low marginal seating surface pressure such as aluminum and resin. As a collar and a spacer, it can adjust the... [See More]
- Material: Steel
- Outside Diameter: 0.472
- Washer Type: Constant Force Spacer
- Finish: NickelPlated
from J.Lanfranco Fastener Systems Inc.
BELLEVILLE WASHERS. DYNAMIC TYPE. NFE 25104 - DIN 2093 [See More]
- Material: Steel
- Inside Diameter: 0.126
- Washer Type: Belleville
- Outside Diameter: 0.315
from Essentra Components
Flange Protector Washers securely fasten flange protector discs when used with Essentra Flange Protector Pins. The washers are available in either chemically resistant HDPE or galvanized steel with a hard to scratch finish and a zinc oxide coating. [See More]
- Material: Steel
- Washer Type: Flange Protector Washers
from NBS Corp.
Featuring external teeth to provide secure locking, all NBS external tooth lock washers are sourced exclusively from ISO-9001 accredited manufacturers. Available from #4 through 5/16 ” diameter, all external tooth lock washers come with zinc finish. [See More]
- Material: Steel
- Number Size: No. 10
- Washer Type: Lockwasher, External Tooth
- Finish: ZincPlated
from Te-Co, Inc.
Product Information. Black Oxide Finish. Case Hardened. Material: 12L14 steel. Reduces stress on threads. Bottom Washer can be used with Spherical Flange Nuts. Compensates for slight misalignment between the workpiece and strap clamp. Many sizes conform to TCMAI standards. Special sizes quoted upon... [See More]
- Material: Steel
- Number Size: 1"
- Washer Type: Spherical
- Inside Diameter: 1.000
from Century Spring Corp.
A disc spring (sometimes called a "Belleville washer" after the inventor) consists primarily of a convex disc supported at the outer periphery by one force and an opposing force on the center of the disc. Disc springs are used singly, or in stacks, to achieve a desired load and travel. The advantage... [See More]
- Material: Steel; H11/H13 steel
- Outside Diameter: 1.011
- Inside Diameter: 0.515
- Thickness: 0.130
from ASRaymond
Stock sizes in high-carbon. Finger spring washers counteract noise, excess wear, end play and vibration, especially at high speeds. They promote efficiency and smooth operation, reducing skidding wear on rotating elements. They are also extremely useful in cases of unavoidable loose internal... [See More]
- Material: Steel
- Inside Diameter: 0.312
- Washer Type: Finger
- Outside Diameter: 0.595
from L.H. Dottie Company
ROUND TYPE. STEEL MATERIAL. ZINC PLATED FINISH. 7/32 INCH INNER DIAMETER. 1/2 INCH OUTER DIAMETER. 3/64 INCH THICKNESS. 3/16 INCH FASTENER SIZE. CONSTRUCTIONAL FEATURE CORROSION RESISTANT. PC 4110 MODEL [See More]
- Material: Steel
- Inside Diameter: 0.219
- Washer Type: Flat or USS
- Outside Diameter: 0.500
from Hi-Tech Seals, Inc.
Washers are typically used to distribute the weight and pressure that the bolt exerts. Many of Hi-Tech Seals washers also seal between the bolt and the surface. [See More]
- Material: Steel; Nitrile
- Washer Type: Self-sealing
from Minerallac Company
STEEL MATERIAL. ZINC PLATED FINISH. 1/4 INCH INNER DIAMETER. 1-1/2 INCH OUTER DIAMETER. 0.047 TO 0.08 INCH THICKNESS. PACKAGING QUANTITY 100 PER BOX [See More]
- Material: Steel
- Inside Diameter: 0.250
- Washer Type: Fender
- Outside Diameter: 1.500
from Fastener SuperStore, Inc.
#2 (AN960-2) Military Machine Screw Washer / AN Standard / Steel / Cadmium Yellow. Tested & Certified to Military Standards. [See More]
- Material: Steel
- Number Size: No. 2
- Washer Type: Flat or USS; Military Machine Screw Washer
- Finish: Cadmium Yellow
from Carr Lane Manufacturing Co.
Flat washer with a serrated face to prevent two parts from sliding in relation to each other. Close tolerance on washer ID prevents the stud from slipping. [See More]
- Material: Steel
- Number Size: No. 10 (optional feature); 1/4" (optional feature); 5/16" (optional feature); 3/8" (optional feature)
- Washer Type: Flat or USS
- Inside Diameter: 0.194 to 0.375
from Atkore International
STEEL MATERIAL. POWER GOLD FINISH FINISH. 1/2 INCH FASTENER SIZE. POWER-STRUT. BRAND. WEIGHT 1.5 LB PER 100 PIECES. PS 211 MODEL [See More]
- Material: Steel
- Number Size: 1/2"
- Washer Type: Lockwasher, Helical Spring
- Finish: POWER GOLD FINISH
from Bridgeport Fittings, Inc.
STEEL MATERIAL. RUBBER COATED GALVANIZED FINISH. 0.81 INCH INNER DIAMETER. 1.5 INCH OUTER DIAMETER. UL 514B, UL (CANADA AND US) APPROVAL. 3/4 INCH X 1/2 INCH TRADE SIZE. RIGID, IMC CONDUIT TYPE. MIGHTY-SEAL[R] BRAND. ROHS COMPATIBLE. APPLICABLE STANDARD NEMA FB-1. ENCLOSURE TYPE NEMA 3R. APPLICATION... [See More]
- Material: Steel
- Inside Diameter: 0.810
- Washer Type: Reducing Washer
- Outside Diameter: 1.500
from PHD Manufacturing, Inc.
FASTENER SIZE 1/4 INCH. FINISH/COATING PLAIN. INNER DIAMETER 5/16 INCH. INNER DIAMETER - DECIMAL .3125. INNER DIAMETER - DECIMAL - UOM IN. INNER DIAMETER - FRACTIONAL 5/16. MATERIAL LOW CARBON STEEL. OUTER DIAMETER 3/4 INCH. OUTER DIAMETER - DECIMAL .75. OUTER DIAMETER - DECIMAL - UOM IN. OUTER... [See More]
- Material: Steel
- Inside Diameter: 0.312
- Washer Type: Flat or USS
- Outside Diameter: 0.750
from American Belleville
American Belleville Disc Springs are manufactured to exacting standards, where predictability, repeatability and long fatigue life are paramount. Governed by the specifications outlined in the European DIN EN 16984/16983 (formerly DIN 2092/2093), they are engineered and manufactured to perform as... [See More]
- Material: Steel; 0.3mm Thick
- Outside Diameter: 0.236
- Inside Diameter: 0.126
- Thickness: 0.018
from TFC Ltd.
Dimensions: Inches. Material: Steel. Finish: Zinc & Clear / Zinc Yellow. Self Colour [See More]
- Material: Steel
- Finish: ZincPlated; ZincChromate
- Washer Type: Square or Rectangular Hole
from NBK America LLC
There is a variety of outside diameters and thickness relative to normal plain washers. For securing seating surface on the long hole position and engagement of materials with low marginal seating surface pressure such as aluminum and resin. As a collar and a spacer, it can adjust the... [See More]
- Material: Steel
- Outside Diameter: 0.472
- Washer Type: Constant Force Spacer
- Finish: BlackOxide
from J.Lanfranco Fastener Systems Inc.
FLEX DELTA WASHERS [See More]
- Material: Steel
- Outside Diameter: 0.307
- Inside Diameter: 0.122
- Thickness: 0.020
from NBS Corp.
Featuring internal teeth to provide secure locking, all NBS internal tooth lock washers are sourced exclusively from ISO-9001 accredited manufacturers. Available from #4 through 3/8 ” internal diameter, all internal tooth lock washers come with zinc finish. [See More]
- Material: Steel
- Number Size: No. 10
- Washer Type: Lockwasher, Internal Tooth
- Finish: ZincPlated
from Te-Co, Inc.
Product Information. Black Oxide Finish. Case Hardened. Material: 12L14 steel. Reduces stress on threads. Bottom Washer can be used with Spherical Flange Nuts. Compensates for slight misalignment between the workpiece and strap clamp. Many sizes conform to TCMAI standards. Special sizes quoted upon... [See More]
- Material: Steel
- Number Size: 1"
- Washer Type: Spherical
- Inside Diameter: 1.000
from Century Spring Corp.
A disc spring (sometimes called a "Belleville washer" after the inventor) consists primarily of a convex disc supported at the outer periphery by one force and an opposing force on the center of the disc. Disc springs are used singly, or in stacks, to achieve a desired load and travel. The advantage... [See More]
- Material: Steel; High carbon or alloy steel; AISI C1075 or 6150
- Inside Diameter: 0.209
- Washer Type: Belleville
- Outside Diameter: 0.433
from ASRaymond
Metric Disc Spring Washers. Material: carbon and stainless steel. Outside diameter: from .187" (4.75mm) to 4.47" (113mm). Fit bolt or rod diameters from .087" (2mm) to 2.54" (64mm). Load: from 5.8lbs (26N) to 86055lbs (382807N). [See More]
- Material: Steel
- Inside Diameter: 0.126
- Washer Type: Disc Spring Washer
- Outside Diameter: 0.236
from L.H. Dottie Company
SPLIT TYPE. STEEL MATERIAL. ZINC PLATED FINISH. #10 FASTENER SIZE. CONSTRUCTIONAL FEATURE CORROSION AND CHEMICAL RESISTANT. PC 4110 MODEL [See More]
- Material: Steel
- Number Size: No. 10
- Washer Type: Lockwasher, Helical Spring
- Finish: ZincPlated
from Minerallac Company
STEEL MATERIAL. ZINC PLATED FINISH. 3/16 INCH INNER DIAMETER. 1 INCH OUTER DIAMETER. 0.047 TO 0.08 INCH THICKNESS. PACKAGING QUANTITY 100 PER BOX [See More]
- Material: Steel
- Inside Diameter: 0.188
- Washer Type: Fender
- Outside Diameter: 1.000
from Carr Lane Manufacturing Co.
Permanently attached C washer that swings out of the way for clear loading. Can be reversed to swing into position either clockwise or counterclockwise. [See More]
- Material: Steel
- Number Size: 3/8" (optional feature); 1/2" (optional feature); 5/8" (optional feature); 3/4" (optional feature)
- Washer Type: C-Washer
- Metric Size: M10 (optional feature); M12 (optional feature); M16 (optional feature); M20 (optional feature)
from Bridgeport Fittings, Inc.
STEEL MATERIAL. RUBBER COATED GALVANIZED FINISH. 0.81 INCH INNER DIAMETER. 1.84 INCH OUTER DIAMETER. UL 514B, UL (CANADA AND US) APPROVAL. 1 INCH X 1/2 INCH TRADE SIZE. RIGID, IMC CONDUIT TYPE. MIGHTY-SEAL[R] BRAND. ROHS COMPATIBLE. APPLICABLE STANDARD NEMA FB-1. ENCLOSURE TYPE NEMA 3R. APPLICATION... [See More]
- Material: Steel
- Inside Diameter: 0.810
- Washer Type: Reducing Washer
- Outside Diameter: 1.840
from American Belleville
American Belleville ’s Flange Washer line adds deflection to bolted joints, in order to dramatically reduce the effects of large fluctuations in temperature within the application, vibration, bolt creep (stretch), gasket creep, or relaxation, and other elastic interactions within the joint. [See More]
- Material: Steel; H13 Tool Steel, 0.233" Thick
- Number Size: 1"
- Washer Type: Countersunk or Finishing
- Inside Diameter: 1.030
from TFC Ltd.
Dimensions: Imperial. Material: Steel. Finishes: Zinc & Clear / Self Colour [See More]
- Material: Steel
- Finish: ZincPlated
from J.Lanfranco Fastener Systems Inc.
BELLEVILLE WASHERS. STATIC TYPE [See More]
- Material: Steel
- Inside Diameter: 0.138
- Washer Type: Belleville
- Outside Diameter: 0.315
from NBS Corp.
Featuring a split ring and bent into a helical shape, all NBS medium split lock washers are sourced exclusively from ISO-9001 accredited manufacturers. Available from #6 through ¾ ” internal diameter, all medium split lock washers come with zinc finish. [See More]
- Material: Steel
- Number Size: No. 10
- Washer Type: Lockwasher, Helical Spring
- Finish: ZincPlated
from Te-Co, Inc.
Product Information. Black Oxide Finish. Case Hardened. Material: 12L14 steel. Reduces stress on threads. Bottom Washer can be used with Spherical Flange Nuts. Compensates for slight misalignment between the workpiece and strap clamp. Many sizes conform to TCMAI standards. Special sizes quoted upon... [See More]
- Material: Steel
- Number Size: 1"
- Washer Type: Spherical
- Inside Diameter: 1.000
from ASRaymond
Stock sizes in high-carbon and stainless steels. Wave spring washers are usually used in thrust-loading applications for small deflections, particularly where radial space is limited. A typical example is the axial loading of ball bearings. The spring rate is approximately linear between 20% and 80%... [See More]
- Material: Steel
- Inside Diameter: 0.265
- Washer Type: Wave
- Outside Diameter: 0.367
from Minerallac Company
ROUND TYPE. STEEL MATERIAL. ZINC PLATED FINISH. 0.546 INCH INNER DIAMETER. 0.092 INCH OUTER DIAMETER. 0.121 INCH THICKNESS. 1/2 INCH FASTENER SIZE. COLOR SILVER. PACKAGING QUANTITY 100 PER BOX [See More]
- Material: Steel
- Number Size: 1/2"
- Washer Type: Flat or USS
- Inside Diameter: 0.546
from American Belleville
American Belleville Load Washers, also known as Heavy Duty Safety Washers, are designed for use in static bolting applications where requirements for higher axial loads than those of traditional Belleville Washers, are present. They are configured for optimal use with Grade 5 bolts, and manufactured... [See More]
- Material: Steel; 0.3mm Thick
- Outside Diameter: 0.197
- Inside Diameter: 0.087
- Thickness: 0.020
from TFC Ltd.
Dimensions: Imperial. Material: Steel. Finishes: Zinc & Clear / Self Colour [See More]
- Material: Steel
- Finish: ZincPlated
from NBS Corp.
Featuring an attached neoprene rubber attached to the underside of a washer, NBS ’ bonded washer helps seal joints and preventing leakage. Sourced only from ISO-9001 accredited manufacturers, bonded washers are available in #14 diameter with a 5/8 ” O.D. All bonded washers come with... [See More]
- Material: Steel
- Finish: ZincPlated
- Washer Type: Self-sealing
from Minerallac Company
ROUND TYPE. STEEL MATERIAL. GALVANIZED FINISH. 0.918 INCH INNER DIAMETER. 0.98 INCH OUTER DIAMETER. 0.803 INCH THICKNESS. 1/4 INCH FASTENER SIZE. COLOR SILVER. SEAL MATERIAL EPDM. APPLICATION FOR USE WHERE THE NEED TO KEEP WATER FROM SEEPING INTO THE FASTENER OR FASTENER HOLE [See More]
- Material: Steel
- Number Size: 1/4"
- Washer Type: Flat or USS
- Inside Diameter: 0.918
from TFC Ltd.
Dimensions: Imeperial. Material: Steel. Finish: Zinc & Clear/Self Colour [See More]
- Material: Steel
- Finish: ZincPlated
from NBS Corp.
Compatible with fine thread nuts and bolts, all NBS SAE flat washers are sourced exclusively from ISO-9001 accredited manufacturers. Available from #4 through 1 ” internal diameter, all SAE flat washers come with zinc finish. [See More]
- Material: Steel
- Number Size: No. 4
- Washer Type: Flat or USS
- Finish: ZincPlated
from Minerallac Company
INTERNAL TOOTH TYPE. STEEL MATERIAL. ZINC PLATED FINISH. #8 FASTENER SIZE. PACKAGING QUANTITY 100 PER BOX [See More]
- Material: Steel
- Number Size: No. 8
- Washer Type: Lock Tooth Washer - Non Metric
- Finish: ZincPlated
from TFC Ltd.
Dimensions: Imperial. Material: Steel. Finish: Zinc & Clear / Self Colour [See More]
- Material: Steel
- Finish: ZincPlated
from NBS Corp.
Compatible with coarse thread nuts and bolts, all NBS USS flat washers are sourced exclusively from ISO-9001 accredited manufacturers. Available from 3/16 ” through 1 ” internal diameter, all USS flat washers come with zinc finish. [See More]
- Material: Steel
- Number Size: 1"
- Washer Type: Flat or USS
- Finish: ZincPlated
from Minerallac Company
SPLIT TYPE. STEEL MATERIAL. ZINC PLATED FINISH. 0.148 INCH INNER DIAMETER. 0.25 INCH OUTER DIAMETER. 0.031 INCH THICKNESS. #6 FASTENER SIZE. PACKAGING QUANTITY 100 PER BOX [See More]
- Material: Steel
- Number Size: No. 6
- Washer Type: Spring Lock Washer - Non Metric
- Inside Diameter: 0.148
from TFC Ltd.
Dimensions: Imperial. Material: Steel. Finish: Zinc & Clear / Self Colour [See More]
- Material: Steel
- Finish: ZincPlated
from NBS Corp.
Made from medium carbon steel and heat treated for extra hardness, all NBS through hardened USS washers are sourced exclusively from ISO-9001 accredited manufacturers. Available from ¼ ” through 1 ” internal diameter, all through hardened USS washers come with zinc yellow... [See More]
- Material: Steel
- Finish: ZincChromate
- Number Size: 1"
from Minerallac Company
SPLIT TYPE. STEEL MATERIAL. ZINC PLATED FINISH. 0.26 INCH INNER DIAMETER. 0.487 INCH OUTER DIAMETER. 0.062 INCH THICKNESS. 1/4 INCH FASTENER SIZE. PACKAGING QUANTITY 100 PER BOX [See More]
- Material: Steel
- Number Size: 1/4"
- Washer Type: Spring Lock Washer - Non Metric
- Inside Diameter: 0.260
from TFC Ltd.
Dimensions: Imperial. Material: Steel. Finish: Zinc & Clear / Self Colour [See More]
- Material: Steel
- Finish: ZincPlated
from NBS Corp.
Featuring oversized outside diameter, all NBS SAE flat washers are sourced exclusively from ISO-9001 accredited manufacturers. Available from 3/16 ” through 1/2 ” internal diameter, all SAE flat washers come with zinc finish. [See More]
- Material: Steel
- Number Size: 1/2"
- Washer Type: Fender
- Outside Diameter: 1.500
from TFC Ltd.
Dimensions: Inches / Millimeters. Material: Steel. Finish: Zinc & Clear / Self Colour [See More]
- Material: Steel
- Finish: ZincPlated
- Washer Type: Square or Rectangular Hole
from NBS Corp.
Compatible with metric nuts and bolts, all NBS DIN 125A flat washers are sourced exclusively from ISO-9001 accredited manufacturers. Available from M6 through M24 internal diameter, all DIN 125A flat washers come with zinc finish. [See More]
- Material: Steel
- Metric Size: M10
- Washer Type: Flat or USS
- Finish: ZincPlated
from TFC Ltd.
Dimensions: mm. Material: Steel. Finish: Self Colour [See More]
- Material: Steel
- Finish: Self Colour
from TFC Ltd.
Dimensions: mm. Material: Steel. Finish: Self Colour [See More]
- Material: Steel
- Finish: Self Colour
from TFC Ltd.
Dimensions: mm. Material: Steel. Finish: Zinc & Clear [See More]
- Material: Steel
- Finish: ZincPlated