Safety Valves Water Valves
from Shenzhen Dechengwang Technology Co., Ltd
Seats and inserts, which are important components in the valve industry, as a critical component, PTFE is very often to choose as the raw material. PTFE provides a low friction seat, with excellent media compatibility. Filled grades provide wear resistance and can support seating loads of the higher... [See More]
- Valve Type: Foot Valve (optional feature); Wafer (optional feature); Back Flow (optional feature); Angle; Ball; Diaphragm (optional feature); Piston (optional feature); Solenoid; Hydraulic; Relief (optional feature); Safety; Sanitary (optional feature); Shut Off (optional feature)
- Media: Water; Hot Water; Cold Water ; Ground Water (optional feature); Potable Water; Salt Water; Wastewater (optional feature)
from Radwell International
SAFETY RELIEF VALVE, SERIES: 10-300 SERIES, 3/4 IN NOMINAL, MNPT X FNPT CONNECTION, 40 PSIG, HOT WATER, LIQUID AND WATER MEDIA, LIFT LEVER ACTUATOR, BRASS TRIM, EPDM/SILICONE SOFTGOODS, BRONZE BODY, PLAIN BRASS, 250 DEG F, 3.82 IN HEIGHT. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Relief; Safety; Anti-Siphon
- Primary Material: Brass / Bronze
- Media: Water
from Bonomi North America, Inc.
0.5" Stainless steel 2-Way NPT Safety Exhaust Ball Valve & Double Acting Pneumatic Actuator [See More]
- Valve Type: Ball; Safety
- Valve Size: 0.50
- Media: Water
- Maximum Pressure: 600.00
from ThermOmegaTech®
Operation. The High Sample Temperature (HST) Safety Thermal Shutoff Valve is used to sense the sample temperature after the sample cooler and control flow based on fluid temperature. This valve is normally open and allows the sample to pass through it. If the sample temperature exceeds the valve set... [See More]
- Valve Type: Safety; Shut Off
- Valve Size: 0.50
- Media: Water; Hot Water; Cold Water ; Ketones, Oil
- Maximum Pressure: 3000.00
from Shenzhen Dechengwang Technology Co., Ltd
Dechengwang is a specialized Fluoropolymer components manufacturer. Since 2006, the material range expaned from Virgin PTFE to Modified PTFE, PTFE compound, PEEK, PFA, PCTFE, PVDF, PI, PPS and PEI material. The use of fluoroplastic has many advantages in manufacturing and engineering, widely used in... [See More]
- Valve Type: Double Check; Foot Valve (optional feature); Wafer (optional feature); Back Flow (optional feature); Angle; Diaphragm (optional feature); Needle (optional feature); Piston; Solenoid; Hydraulic; Relief; Safety; Sanitary (optional feature); Shut Off (optional feature)
- Actuation: Manual
- Media: Water; Hot Water; Cold Water ; Potable Water; Salt Water; Wastewater (optional feature)
from Bonomi North America, Inc.
0.5" Stainless steel 2-Way NPT Safety Exhaust Ball Valve & 12VDC Plastic On/Off Electric Actuator [See More]
- Valve Type: Ball; Safety
- Valve Size: 0.50
- Media: Water
- Maximum Pressure: 600.00
from ThermOmegaTech®
Operation. A thermostatic element inside the valve senses temperature and if this falls below the setpoint, the valve modulates open to allow flow. When the temperature increases to near the setpoint, the HAT (Heat Actuated Trap) valve modulates closed. HAT valves are available with built-in leakage... [See More]
- Valve Type: Control Valve; Drain; Hydraulic; Safety; Shut Off
- Valve Size: 0.50 to 0.75
- Media: Water; Hot Water; Cold Water ; Glycol, Ketones, Oil
- Maximum Pressure: 300.00
from Bonomi North America, Inc.
0.5" Stainless steel 2-Way NPT Safety Exhaust Ball Valve & 12VDC Metal On/Off Electric Actuator [See More]
- Valve Type: Ball; Safety
- Valve Size: 0.50
- Media: Water
- Maximum Pressure: 600.00
from ThermOmegaTech®
Product Description. TV/HAT valves are ideal for use in conjunction with tracer tubing and tracing systems using pre-traced tubing bundles. These valves are optimal for replacing conventional steam traps on winterization tracing, instrument tracing, condensate return system freeze protection,... [See More]
- Valve Type: Control Valve; Drain; Hydraulic; Safety; Shut Off
- Valve Size: 0.25 to 0.50
- Media: Water; Hot Water; Cold Water ; Ketones, Oil
- Maximum Pressure: 300.00
from ThermOmegaTech®
Product Description. By placing an EcoFlow ® on the seal water outlet of your mechanical seal it will continuously maintain a constant seal water outlet temperature. If the seal water should exceed your specified factory set point it will modulate open discharging the hot water, displacing it... [See More]
- Valve Type: Control Valve; Safety
- Valve Size: 0.25 to 0.38
- Media: Water; Cold Water
- Maximum Pressure: 400.00
from ThermOmegaTech®
Product Description. A safety hazard for plant personnel can occur when utilizing safety showers or eyewash stations if overheating of the pipes caused by solar radiation or steam/electric tracing results in extremely high temperatures at the point of use. The HAT/SP valve can be installed at the... [See More]
- Valve Type: Control Valve; Drain; Safety
- Valve Size: 0.50 to 0.75
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 200.00
from ThermOmegaTech®
Product Description. A safety hazard for plant personnel will occur through solar radiation or overheating caused by steam or electric tracing resulting in extremely high temperatures at the point of use. The IC/SP valve prevents this safety hazard. When installed in safety showers, eyewash... [See More]
- Valve Type: Control Valve; Drain; Safety
- Valve Size: 0.75
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 100.00
from ThermOmegaTech®
Product Description. Because of the unique mixing characteristics inside the STVM ® Valve, it is capable of mixing steam and water without the usual noise and vibration associated with other types of mixers. As a safety feature, the thermal actuator in the valve outlet is designed to turn off... [See More]
- Valve Type: Angle; Balancing; Control Valve; Mixing; Safety; Shut Off
- Valve Size: 1.00
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 150.00
from ThermOmegaTech®
Operation. The GURU ® DL2.1 is the most widely used and proven locomotive freeze protection valve in the world. It may be thought of as an automatic freeze-out plug with one important difference: The stainless steel GURU ® Cartridge releases itself from its body at a pre-set water... [See More]
- Valve Type: Control Valve; Drain; Safety
- Valve Size: 1.25
- Media: Water; Cold Water
- Primary Material: Stainless Steel
from ThermOmegaTech®
Operation. The GURU ® DL2.1 CH and CHS may be thought of as an automatic freeze-out plug with one important difference: The stainless steel GURU ® Cartridge releases itself from its body at a pre-set water temperature (35 °F or 40 °F), rather than being forced out by the tremendous... [See More]
- Valve Type: Control Valve; Drain; Safety
- Valve Size: 2.00
- Media: Water; Cold Water
- Primary Material: Stainless Steel
from ThermOmegaTech®
Operation. The Magnum GURU ® Plug is a higher discharge capacity version of the standard GURU ® Plug. The Magnum GURU ® Plug is a self-operating thermostatic drain valve that responds to engine coolant temperature and will pop open and drain when coolant reaches the setpoint (35 °F... [See More]
- Valve Type: Control Valve; Drain; Safety
- Valve Size: 1.25
- Media: Water; Cold Water
- Primary Material: Stainless Steel
from ThermOmegaTech®
Operation. The 1 ″ GURU PC ® valve is self-contained and drains water bearing systems automatically before freeze damage can occur by monitoring ambient temperatures. Freezing conditions, which put water tanks and piping at risk for freeze damage, occur when the car heat is turned off for... [See More]
- Valve Type: Control Valve; Drain; Safety
- Valve Size: 1.00
- Media: Water; Cold Water ; Potable Water
- Maximum Pressure: 120.00
from ThermOmegaTech®
Operation. The ¾ ” GURU PC ® valve is self-contained and drains water bearing systems automatically before freeze damage can occur by monitoring ambient temperatures. Freezing conditions, which put water tanks and piping at risk for freeze damage, occur when the car heat is turned... [See More]
- Valve Type: Angle; Control Valve; Drain; Safety
- Valve Size: 0.75
- Media: Water; Cold Water ; Potable Water
- Maximum Pressure: 60.00
from ThermOmegaTech®
Product Description. Relying on manually opening valves for freeze protection allows for human error or plugging of partially cracked valves. This annually accounts for large amounts of freeze damage resulting in huge monetary loss including repairing damaged equipment, piping, as well as system... [See More]
- Valve Type: Control Valve; Drain; Safety
- Valve Size: 0.50 to 0.75
- Media: Water; Cold Water ; Potable Water (optional feature)
- Maximum Pressure: 300.00
from ThermOmegaTech®
Product Description. Relying on having to manually open valves for freeze protection allows for human error or plugging of partially cracked valves. This annually accounts for large amounts of freeze damage resulting in huge monetary losses including repairing damaged equipment, piping, as well as... [See More]
- Valve Type: Control Valve; Drain; Safety
- Valve Size: 0.50 to 0.75
- Media: Water; Cold Water ; Potable Water (optional feature)
- Maximum Pressure: 100.00 to 150.00
from Chemac Inc./Uraca/Uhde HPT/Gather/BHDT
Full Stroke Safety Valve. Pressure regulating screw. Spring plate. Compression spring. Pressure bolt. Valve guide and seat. Valve cone. Retaining disk and flange. Compressed water. Retainging space. Return [See More]
- Valve Type: Safety
- Media: Water
from Spirax-Sarco
The SV615 full lift, full nozzle safety valve is suitable for steam, air, inert industrial gas and non-hazardous liquid service. [See More]
- Valve Type: Safety
- Maximum Pressure: 203.05 to 261.07
- Media: Water; Non-hazardous Liquid
- Media Temperature: 248 to 446
from Watson McDaniel Company
The WSVB Safety Relief Valves are used for over-pressure protec- tion on unfired pressure vessels in saturated steam systems. As safety valves open on a non-compressible fluid applica- tion, the disc lifts directly proportional to the increase in system pressure over the valve set point. Safety... [See More]
- Valve Type: Relief; Safety
- Valve Size: 0.50 to 0.75
- Media: Water
- Maximum Pressure: 250.00
from CEME
CEME has always been a reference point for the ironing and steam cleaning world. The most important brands in this sector rely on CEME for electro valves, pumps, pressure gauges and safety valves, so as to guarantee the utmost efficiency and quality for their products. . Temperature and... [See More]
- Valve Type: Relief; Safety
- Media Temperature: 356
- Media: Water
from Watts
Series Figure 41A Safety Relief Valves for Air, Gas, and Vapors are ASME section VIII valves used for compressors, intercoolers, aftercoolers and receivers, air makeup units, gas burners, pneumatic conveying/elevating equipment, dryers and other pressure vessels and piping, that handle air, gases,... [See More]
- Valve Type: Relief; Safety
- Media: Water
from General Pump
Check Valve, Brass. Features. Light Cracking Pressure. Brass Body with Stainless Wetted Parts. O-ring on Poppet for a Leak Proof Seal. Solid Body Construction, Won ’t Come Apart During Installation [See More]
- Valve Type: Check; Relief; Safety
- Valve Size: 0.25 to 0.75
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 2200.00
from Chemac Inc./Uraca/Uhde HPT/Gather/BHDT
The URACA safety valve, type HHV, is a spring loaded seat valve with metal seal. Casing is made from spherolitic cast iron. All other materials had been selected for operation with clean water, water-oil-emulsion or hydraulic oil application. After having set the blow-off pressure by turning the... [See More]
- Valve Type: Safety
- Media: Water
from Spirax-Sarco
The SV60 is a range of full lift flanged safety valves suitable for use on steam, inert industrial gas and water services. Please contact Spirax Sarco for suitability of any other media. [See More]
- Valve Type: Safety
- Maximum Pressure: 2.90
- Media: Water
- Media Temperature: 662 to 752
from CEME
CEME has always been a reference point for the ironing and steam cleaning world. The most important brands in this sector rely on CEME for electro valves, pumps, pressure gauges and safety valves, so as to guarantee the utmost efficiency and quality for their products. . Temperature and... [See More]
- Valve Type: Relief; Safety
- Media Temperature: 338
- Media: Water
from Watts
Series 315-M2 Steam Safety Relief Valves are used in commercial and industrial applications for low-pressure, steam heating boilers and process equipment. It consists of a bronze body construction with NPT threaded male inlet and threaded female outlet (drain) connection, stainless steel spring, a... [See More]
- Valve Type: Relief; Safety
- Valve Size: 0.75
- Media: Water
from General Pump
Check Valve, Stainless Steel. Features. Light Cracking Pressure. Stainless Body with Stainless Wetted Parts. O-ring on Poppet for a Leak Proof Seal. Solid Body Construction, Won ’t Come Apart During Installation [See More]
- Valve Type: Check; Relief; Safety
- Valve Size: 0.25 to 0.75
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 6500.00
from Chemac Inc./Uraca/Uhde HPT/Gather/BHDT
General information. In normal operating conditions, safety valves have to close tightly and must open, if pressure increases to an inadmissibly high figure; they have to avoid further pressure increase and must shut again, after the pressure has been reduced. Hofer safety valves meet these... [See More]
- Valve Type: Safety
- Media: Water
from Spirax-Sarco
The SV60H is a range of full lift safety valves suitable for the protection of hot water generators. The construction is characterised by an EPDM bellows and elastomer seat seal to ensure leak free operation. [See More]
- Valve Type: Safety
- Maximum Pressure: 145.04
- Media: Water; Hot Water
- Media Temperature: 248
from CEME
CEME has always been a reference point for the ironing and steam cleaning world. The most important brands in this sector rely on CEME for electro valves, pumps, pressure gauges and safety valves, so as to guarantee the utmost efficiency and quality for their products. . Temperature and... [See More]
- Valve Type: Relief; Safety
- Media Temperature: 356
- Media: Water
from Watts
Series 415 Steam Safety Relief Valves are used in commercial and industrial applications for low-pressure, steam heating boilers and process equipment. It consists of a brass body (size 1/4 in.), or a bronze body (sizes 1, 1 1/4, 1 1/2 in.) construction with NPT threaded male inlet and threaded... [See More]
- Valve Type: Relief; Safety
- Valve Size: 0.75 to 2.00
- Media: Water
from General Pump
Unloader with 2.2 mm Injector, optional banjo fittings. Reduces cost - eliminates the need for fittings and bypass hose. Compact design - features forged brass body and hardware. Versatile - mounts in seconds to either side of pump manifold. Adjustable unloader valve - trapped pressure type with... [See More]
- Valve Type: Relief; Safety
- Valve Size: 0.38 to 0.50
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 3000.00
from Spirax-Sarco
The SVL606 is a stainless steel, full lift T ÜV approved flanged safety valve suitable for use with steam, gas and liquids. [See More]
- Valve Type: Safety
- Maximum Pressure: 101.53 to 580.15
- Media: Water; Liquid
- Media Temperature: 266 to 572
from CEME
CEME has always been a reference point for the ironing and steam cleaning world. The most important brands in this sector rely on CEME for electro valves, pumps, pressure gauges and safety valves, so as to guarantee the utmost efficiency and quality for their products. . Temperature and... [See More]
- Valve Type: Relief; Safety
- Media Temperature: 356
- Media: Water
from Watts
Complete brine tank assembly including: overflow, grid, safety valve w/ float, air check and well; Available in blue, black, and almond; up to 1,400 lbs salt capacity. [See More]
- Valve Type: Check; Float; Safety
- Media: Water
from General Pump
Direct Mount Unloader with or without 2 mm Injector. Reduces cost - eliminates the need for fittings and bypass hose. Compact design - features forged brass body and hardware. Versatile - mounts in seconds to either side of pump manifold. Adjustable unloader valve - trapped pressure type with... [See More]
- Valve Type: Relief; Safety
- Valve Size: 0.38
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 1600.00
from Spirax-Sarco
The SVL488 is a soft seated stainless steel, full lift, T ÜV approved safety valve suitable for steam, gas and liquid applications. [See More]
- Valve Type: Safety
- Valve Size: 1.50 to 6.00
- Media: Water; Liquid
- Maximum Pressure: 118.93 to 232.06
from CEME
CEME has always been a reference point for the ironing and steam cleaning world. The most important brands in this sector rely on CEME for electro valves, pumps, pressure gauges and safety valves, so as to guarantee the utmost efficiency and quality for their products. . Temperature and... [See More]
- Valve Type: Relief; Safety
- Media Temperature: 356
- Media: Water
from Watts
Complete brine tank assembly including: overflow, safety valve w/ float, and air check; Available in blue, black, and almond; 250 lbs salt capacity. [See More]
- Valve Type: Check; Float; Safety
- Media: Water
from General Pump
Direct Mount, Control Set Unloader For TT/TP Series 51 Pumps. General Pump, along with our parent company, Interpump Group S.r.l., has been the world leader in plunger pump development since 1982. While known as the leader in plunger pumps for the pressure cleaning industry, we have expanded to... [See More]
- Valve Type: Relief; Safety
- Valve Size: 0.38
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 3200.00
from CEME
CEME has always been a reference point for the ironing and steam cleaning world. The most important brands in this sector rely on CEME for electro valves, pumps, pressure gauges and safety valves, so as to guarantee the utmost efficiency and quality for their products. . Temperature and... [See More]
- Valve Type: Relief; Safety
- Media Temperature: 338
- Media: Water
from General Pump
Direct Mount, Control Set Unloader for Use With EZ, 47, 60 and 63 Series Pumps, Optional 1.8 MM Injector. Features. Direct-mount, control set unloader. Used with 44, 47, 50, 60, 63 series pumps. Built-in bypass. Sturdy steel and brass construction. Adjustable locknut to control the maximum pressure. [See More]
- Valve Type: Relief; Safety
- Valve Size: 0.38 to 0.50
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 3200.00
from CEME
CEME has always been a reference point for the ironing and steam cleaning world. The most important brands in this sector rely on CEME for electro valves, pumps, pressure gauges and safety valves, so as to guarantee the utmost efficiency and quality for their products. . Temperature and... [See More]
- Valve Type: Relief; Safety
- Media Temperature: 356
- Media: Water
from General Pump
Direct Mount Control Set Unloader For EZ 47, 60 and 63 Series Pumps, optional 2.1mm injector. Features. Direct-mount for EZ 47, 60 and 63 series pumps. Sturdy steel and brass construction. Adjustable locknut to control the maximum pressure. Easy maintenance. Plastic cap with anti-removal system. [See More]
- Valve Type: Relief; Safety
- Valve Size: 0.38 to 0.50
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 3200.00
from CEME
CEME has always been a reference point for the ironing and steam cleaning world. The most important brands in this sector rely on CEME for electro valves, pumps, pressure gauges and safety valves, so as to guarantee the utmost efficiency and quality for their products. . Temperature and... [See More]
- Valve Type: Relief; Safety
- Media Temperature: 356
- Media: Water
from General Pump
Direct Mount, Control Set Unloader, Available With or Without Injector. General Pump, along with our parent company, Interpump Group S.r.l., has been the world leader in plunger pump development since 1982. While known as the leader in plunger pumps for the pressure cleaning industry, we have... [See More]
- Valve Type: Relief; Safety
- Valve Size: 0.38 to 0.50
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 3000.00
from CEME
CEME has always been a reference point for the ironing and steam cleaning world. The most important brands in this sector rely on CEME for electro valves, pumps, pressure gauges and safety valves, so as to guarantee the utmost efficiency and quality for their products. . Temperature and... [See More]
- Valve Type: Relief; Safety
- Media Temperature: 356
- Media: Water
from General Pump
Easy Start Valve, Provides Easy Start for Manual Start Gas Engines. Features. Maximum working pressure = 5,000 psi. Eases system start-up. Especially useful for engine-driven pressure washers. Fits any brand of pump. Designed and made in the USA. Long-life construction. Improved seal design limits... [See More]
- Valve Type: Relief; Safety
- Valve Size: 0.12 to 0.50
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 5000.00
from CEME
CEME has always been a reference point for the ironing and steam cleaning world. The most important brands in this sector rely on CEME for electro valves, pumps, pressure gauges and safety valves, so as to guarantee the utmost efficiency and quality for their products. . Temperature and... [See More]
- Valve Type: Relief; Safety
- Media Temperature: 356
- Media: Water
from General Pump
Easy Start Valve. Eliminates back pressure when pulling a manual start gas engine. [See More]
- Valve Type: Relief; Safety
- Valve Size: 0.25 to 0.38
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 4050.00
from CEME
CEME has always been a reference point for the ironing and steam cleaning world. The most important brands in this sector rely on CEME for electro valves, pumps, pressure gauges and safety valves, so as to guarantee the utmost efficiency and quality for their products. . Temperature and... [See More]
- Valve Type: Relief; Safety
- Media Temperature: 356
- Media: Water
from General Pump
Flow Sensitive Unloader (optional 6 amp microswitch). Features. Near total zero setting of the outlet pressure at gun closure increases safety. Reduced pressure loss. Makes for easier gun operation. Extremely reliable. Easy maintenance [See More]
- Valve Type: Relief; Safety
- Valve Size: 0.50
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 4050.00
from CEME
CEME has always been a reference point for the ironing and steam cleaning world. The most important brands in this sector rely on CEME for electro valves, pumps, pressure gauges and safety valves, so as to guarantee the utmost efficiency and quality for their products. . Temperature and... [See More]
- Valve Type: Relief; Safety
- Media Temperature: 356
- Media: Water
from General Pump
Flow Sensitive Unloader. Optional: 6 Amp Microswitch, 3.5 and 4.5 Orifice. Features. Near total zero setting of the outlet pressure at gun closure increases safety. Reduced pressure loss. Makes for easier gun operation. Extremely reliable. Easy maintenance [See More]
- Valve Type: Relief; Safety
- Valve Size: 0.38
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 4000.00
from General Pump
Flow Sensitive Unloader (optional 6 Amp Microswitch). General Pump, along with our parent company, Interpump Group S.r.l., has been the world leader in plunger pump development since 1982. While known as the leader in plunger pumps for the pressure cleaning industry, we have expanded to serve... [See More]
- Valve Type: Relief; Safety
- Valve Size: 0.38
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 2300.00
from General Pump
Flow Sensitive Unloader. Features. Compact - Low profile saves space. Dual Auxiliary Ports - Allows for easy installation of pressure operated accessories. Reliability - No discharge check valve means higher reliability and less maintenance. High Operating Temperature - to 165 º F [See More]
- Valve Type: Relief; Safety
- Valve Size: 0.38 to 0.50
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 3600.00
from General Pump
Flow Sensitive Unloader. Features. All stainless and brass internal parts. No external moving parts or springs. Unique balance nozzle principle: Eliminates high pressure in all lines while unit is in bypass mode. Eliminates pressure peaks normally generated by conventionally designed unloaders. [See More]
- Valve Type: Relief; Safety
- Valve Size: 0.38
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 1500.00
from General Pump
Flow Sensitive Unloader. Features. Features all stainless and brass internal parts. No external moving parts or springs. Unique balance nozzle principle: Eliminates high pressure in all lines while unit is in bypass mode. Eliminates pressure peaks normally generated by conventionally designed... [See More]
- Valve Type: Relief; Safety
- Valve Size: 0.38
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 3000.00
from General Pump
Flow Sensitive Unloader. Features. Features all stainless and brass internal parts. New design reduces sensitivity to entrapped air. No external moving parts or springs. Eliminates high pressure in all lines while unit is in bypass mode. Unique balanced piston design permits precise pressure... [See More]
- Valve Type: Relief; Safety
- Valve Size: 0.38
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 3500.00
from General Pump
Industrial Safety Relief Valve. General Pump, along with our parent company, Interpump Group S.r.l., has been the world leader in plunger pump development since 1982. While known as the leader in plunger pumps for the pressure cleaning industry, we have expanded to serve Vehicle Wash as well as many... [See More]
- Valve Type: Relief; Safety
- Valve Size: 1.50
- Media: Water; Cold Water
- Maximum Pressure: 5800.00
from General Pump
Industrial Safety Relief Valve. General Pump, along with our parent company, Interpump Group S.r.l., has been the world leader in plunger pump development since 1982. While known as the leader in plunger pumps for the pressure cleaning industry, we have expanded to serve Vehicle Wash as well as many... [See More]
- Valve Type: Relief; Safety
- Valve Size: 0.75
- Media: Water; Cold Water
- Maximum Pressure: 1450.00
from General Pump
Industrial Safety Relief Valve. Features. Regulates the operating pressure of the system by releasing excess volume through the by-pass. Protects the system from over pressurization [See More]
- Valve Type: Relief; Safety
- Valve Size: 0.50
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 10150.00
from General Pump
Industrial Safety Relief Valve. Features. Limits the pressure at the max working pressure of the system. When the max working pressure is exceeded it opens and discharges the total pump flow in the atmosphere eliminating the high pressure in the system. The valve is supplied already set and leaded... [See More]
- Valve Type: Relief; Safety
- Valve Size: 0.50
- Media: Water; Cold Water
- Maximum Pressure: 14500.00
from General Pump
Industrial Safety Relief Valve, Stainless Steel. Features. Regulates the operating pressure of the system by releasing excess volume through the by-pass. Protects the system from over pressurization [See More]
- Valve Type: Relief; Safety
- Valve Size: 0.75
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 4350.00
from General Pump
Industrial Safety Valve. Features. Limits the pressure to the maximum working pressure of the system. When the max working pressure is exceeded it opens and discharges the total pump flow, eliminating the high pressure in the system. Pre-set and leaded according to the working pressure stamped on... [See More]
- Valve Type: Relief; Safety
- Valve Size: 0.50
- Media: Water; Cold Water
- Maximum Pressure: 26100.00
from General Pump
Industrial Safety Valve. Features. Limits the pressure to the maximum working pressure of the system. When the max working pressure is exceeded it opens and discharges the total pump flow, eliminating the high pressure in the system. Pre-set and leaded according to the working pressure stamped on... [See More]
- Valve Type: Relief; Safety
- Valve Size: 0.50
- Media: Water; Cold Water
- Maximum Pressure: 26100.00