Mechanical Device Water Valves
from DFT Inc.
The DFT ® Model PDC ® Silent Check Valve is specially designed for use on the discharge side of reciprocating air or gas compressors. It includes a pulse damping chamber to maintain the disc in the open position during the momentary reductions in flow associated with each cycle of a... [See More]
- Actuation: Mechanical
- Valve Size: 2.00 to 12.00
- Media: Water
- Maximum Pressure: 3705.00
from Rotork plc
Suitable for air quality to ISO 8573.1 Class 4: dirt, water and oil High flow - up to 102.0 Cv Working pressure up to 174 psi / 12 bar NAMUR interface multi-function plates Extensive valve operator options [See More]
- Actuation: Mechanical; Pneumatic
- Maximum Pressure: 174.00
- Media: Water
from Hilliard Corporation (The)
Like HILCO Transfer Valves, HILCO Ball valves provide uninterrupted flow during transfer of fluid. Unlike Transfer Valves, which are limited to liquid service, HILCO Ball Valves are available for both liquids and gases. They can provide sealing for API-598 Class II for liquid service and ANSI... [See More]
- Actuation: Manual; Mechanical; Electric
- Primary Material: Stainless Steel; Steel
- Media: Water
- Connection Description: BoltFlange
from Festo Corporation
Automatable 2-way ball valve. Brass design. Blow-out proof shaft. Manual operation possible using hand lever. Connecting thread according to EN 10226-1. Mounting flange to ISO 5211 [See More]
- Actuation: Mechanical
- Media Temperature: -4 to 302
- Media: Water
- Primary Material: Brass / Bronze
from Clippard
Clippard is known as the pioneer of miniature pneumatic products. The MAV series poppet valves were introduced in 1958 and were known for their bubble tight design with large flow for their small #10-32 threaded ports. Clippard ’s GV series valves offer the same characteristics of its original... [See More]
- Actuation: Manual; Mechanical; Electric; Pneumatic
- Maximum Pressure: 150.00
- Media: Water; Oil
- Media Temperature: 32 to 230
from DFT Inc.
The DFT ® Excalibur ® Silent Check Valve is a spring-assisted, center guided, in-line, check valve that provides reliable, low maintenance service for a wide range of fluids and pressure/temperature combinations. The valve consists of a body, gasket, seat, spring, disc with stem and guide... [See More]
- Actuation: Mechanical
- Valve Size: 2.00 to 24.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater
- Maximum Pressure: 3705.00
from Hilliard Corporation (The)
HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug —provides positive sealing to minimize leakage. Rugged, precision-machined, straight body heavy wall steel... [See More]
- Actuation: Manual; Mechanical; Electric
- Valve Size: 1.00 to 10.00
- Media: Water; Fuel Oil, Lubricants
- Primary Material: Ductile Iron; Stainless Steel; Steel
from Festo Corporation
Automatable 2-way or 3-way ball valve. Stainless steel design. Blow-out proof shaft. Manual operation possible using hand lever. Connecting thread according to EN 10226-1. Mounting flange to ISO 5211. Use in zone 1, 21, 2, 22 [See More]
- Actuation: Mechanical
- Media Temperature: 14 to 392
- Media: Water
- Primary Material: Stainless Steel; Steel
from Clippard
Available in 3-way and 4-way configurations, these valves feature the same benefits available with other Minimatic ® brass valves: proven reliability, compact size, economical pricing, precision machining and more. These valves feature #10-32 inlet and outlet ports and are available as toggle or... [See More]
- Actuation: Manual; Mechanical; Electric; Pneumatic
- Valve Size: 0.12
- Media: Water; Oil
- Maximum Pressure: 150.00
from DFT Inc.
The DFT ® Model DLC ® is a corrosion resistant, dependable, versatile and economical spring assisted, in-line check valve for a wide range of applications. Whether the fluid is liquid, gas or steam, the DLC ® provides tight shut-off and protects other equipment in the system from water... [See More]
- Actuation: Mechanical
- Valve Size: 0.50 to 3.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater
- Maximum Pressure: 720.00
from Hilliard Corporation (The)
HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug —provides positive sealing to minimize leakage. Rugged, precision-machined, straight body heavy wall steel... [See More]
- Actuation: Manual; Mechanical; Electric
- Valve Size: 1.00 to 10.00
- Media: Water; Fuel Oil, Lubricants
- Primary Material: Ductile Iron; Stainless Steel; Steel
from Festo Corporation
Automatable 2-way or 3-way ball valve. Stainless steel design. Blow-out proof shaft. Manual operation possible using hand lever. Connecting thread according to EN 10226-1. Mounting flange to ISO 5211. Use in zone 1, 21, 2, 22 [See More]
- Actuation: Mechanical
- Media Temperature: 14 to 392
- Media: Water
- Primary Material: Stainless Steel; Steel
from Clippard
The R-614 Multi Check Valve integrates four check valves in one compact valve body. Take advantage of the many features of this versatile line including easy manifold mounted design, integrated circuitry, Octo port outlet design, maximized performance and more. • Efficient design. • Eight... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Media: Water; Oil
- Media Temperature: 32 to 180
from DFT Inc.
The FBC ™ is a compact, lightweight, insert wafer check valve that easily installs between two flanges. The in-line, spring assisted design prevents "water hammer" and "reverse flow". The FBC ™ contains all of the proven features of the Basic-Check ® valve developed by DFT ® over... [See More]
- Actuation: Mechanical
- Valve Size: 1.00 to 4.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater
- Maximum Pressure: 720.00
from Festo Corporation
Automatable 2-way or 3-way ball valve. Stainless steel design. Blow-out proof shaft. Manual operation possible using hand lever. Connecting thread according to EN 10226-1. Mounting flange to ISO 5211. Use in zone 1, 21, 2, 22 [See More]
- Actuation: Mechanical
- Media Temperature: 14 to 392
- Media: Water
- Primary Material: Stainless Steel; Steel
from Clippard
J-Series Shuttle Valve, 1/8" Male Outlet, (2) 1/8" Female Inlets [See More]
- Actuation: Mechanical
- Valve Size: 0.12
- Media: Water
- Maximum Pressure: 300.00
from DFT Inc.
The DFT ® Restrictor Check Valve (RCV) is a versatile, all-purpose, spring-assisted, in-line check valve for applications that require higher cracking pressures to open the check valve than those offered by other DFT ® check valves. Cracking pressures are available from 2 to 40 psi. Like the... [See More]
- Actuation: Mechanical
- Valve Size: 0.25 to 2.50
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater
- Maximum Pressure: 2500.00
from Festo Corporation
Automatable 2-way or 3-way ball valve. Stainless steel design. Blow-out proof shaft. Manual operation possible using hand lever. Connecting thread according to EN 10226-1. Mounting flange to ISO 5211. Use in zone 1, 21, 2, 22 [See More]
- Actuation: Mechanical
- Media Temperature: 14 to 392
- Media: Water
- Primary Material: Stainless Steel; Steel
from Clippard
J-Series Shuttle Valve, 1/4" Male Outlet, (2) 1/8" Female Inlets [See More]
- Actuation: Mechanical
- Valve Size: 0.12
- Media: Water
- Maximum Pressure: 300.00
from DFT Inc.
The DSV ® is an in-line spring-assisted check valve designed to prevent flow reversal in industries with strict cleanliness codes. To accommodate various piping arrangements, the DSV ® is available as a "Vertical" or "Horizontal" valve. The Horizontal valve is for Horizontal lines requiring... [See More]
- Actuation: Mechanical
- Valve Size: 0.50 to 3.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater
- Maximum Pressure: 108.00
from Festo Corporation
Automatable 2-way or 3-way ball valve. Stainless steel design. Blow-out proof shaft. Manual operation possible using hand lever. Connecting thread according to EN 10226-1. Mounting flange to ISO 5211. Use in zone 1, 21, 2, 22 [See More]
- Actuation: Mechanical
- Media Temperature: 14 to 392
- Media: Water
- Primary Material: Stainless Steel; Steel
from Clippard
J-Series Shuttle Valve, 1/4" Male Outlet, 1/4" Male Inlet, 1/4" Female Inlet [See More]
- Actuation: Mechanical
- Valve Size: 0.12
- Media: Water
- Maximum Pressure: 300.00
from DFT Inc.
The DSV ® is an in-line spring-assisted check valve designed to prevent flow reversal in industries with strict cleanliness codes. To accommodate various piping arrangements, the DSV ® is available as a "Vertical" or "Horizontal" valve. The Horizontal valve is for Horizontal lines requiring... [See More]
- Actuation: Mechanical
- Valve Size: 0.50 to 3.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater
- Maximum Pressure: 108.00
from Festo Corporation
Automatable 2-way or 3-way ball valve. Stainless steel design. Blow-out proof shaft. Manual operation possible using hand lever. Connecting thread according to EN 10226-1. Mounting flange to ISO 5211. Use in zone 1, 21, 2, 22 [See More]
- Actuation: Mechanical
- Media Temperature: 14 to 392
- Media: Water
- Primary Material: Stainless Steel; Steel
from Clippard
J-Series Shuttle Valve, 1/4" Female Outlet, (2) 1/8" Female Inlets [See More]
- Actuation: Mechanical
- Valve Size: 0.12
- Media: Water
- Maximum Pressure: 300.00
from DFT Inc.
The DFT ® Model GLC ® Silent Check Valve is a spring-assisted, center guided, in-line, flanged check valve that provides reliable, low maintenance service for a wide range of fluids and pressure/temperature combinations. The valve consists of a body, seat, spring, disc with stem and guide... [See More]
- Actuation: Mechanical
- Valve Size: 1.00 to 24.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater
- Maximum Pressure: 6170.00
from Festo Corporation
Automatable 2-way or 3-way ball valve. Stainless steel design. Blow-out proof shaft. Manual operation possible using hand lever. Connecting thread according to EN 10226-1. Mounting flange to ISO 5211. Use in zone 1, 21, 2, 22 [See More]
- Actuation: Mechanical
- Media Temperature: 14 to 392
- Media: Water
- Primary Material: Stainless Steel; Steel
from Clippard
J-Series Shuttle Valve, 1/4" Female Outlet, 1/4" Male Inlet, 1/4" Female Inlet [See More]
- Actuation: Mechanical
- Valve Size: 0.12
- Media: Water
- Maximum Pressure: 300.00
from DFT Inc.
The DFT ® Basic-Check ® valve is a versatile all-purpose, spring-assisted, in-line check valve that provides reliable, low maintenance service for a wide range of liquids and gases at various pressure/temperature combinations. The valve consists of a guard cage, spring, valve disc, retaining... [See More]
- Actuation: Mechanical
- Valve Size: 0.25 to 2.50
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater
- Maximum Pressure: 6000.00
from Festo Corporation
Automatable 2-way or 3-way ball valve. Stainless steel design. Blow-out proof shaft. Manual operation possible using hand lever. Connecting thread according to EN 10226-1. Mounting flange to ISO 5211. Use in zone 1, 21, 2, 22 [See More]
- Actuation: Mechanical
- Media Temperature: 14 to 392
- Media: Water
- Primary Material: Stainless Steel; Steel
from Clippard
J-Series Shuttle Valve, 1/4" Female Outlet, (2) 1/4" Female Inlets [See More]
- Actuation: Mechanical
- Valve Size: 0.12
- Media: Water
- Maximum Pressure: 300.00
from DFT Inc.
The DFT ® Model SCV ® is a corrosion resistant, dependable, versatile and economical spring-assisted, in-line check valve for a wide range of applications. Whether the fluid is liquid, gas or steam, the SCV ® provides tight shut-off and protects other equipment in the system from water... [See More]
- Actuation: Mechanical
- Valve Size: 0.50 to 3.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater
- Maximum Pressure: 3600.00
from Festo Corporation
Automatable 2-way ball valve with compact flange. Stainless steel design. Short installed length. Blow-out proof shaft. Manual operation possible using hand lever. Flange to DIN 1092-1. Mounting flange to ISO 5211. Use in zone 1, 21, 2, 22 [See More]
- Actuation: Mechanical
- Media Temperature: 14 to 392
- Media: Water
- Primary Material: Stainless Steel; Steel
from Clippard
Shuttle Valve, #10-32 Male Outlet, #10-32 Female Inlets [See More]
- Actuation: Mechanical
- Valve Size: 0.19
- Media: Water
- Maximum Pressure: 250.00
from DFT Inc.
DFT ® Vacuum Breakers provide effective protection against collapse of pressure vessels, tanks and rolls. They prevent condensate "back-up" when equipment is shut down or inlet steam is reduced by modulating control valves. In piping systems, DFT ® Vacuum Breakers are used to break siphons,... [See More]
- Actuation: Mechanical
- Valve Size: 1.00 to 4.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater
- Maximum Pressure: 2500.00
from Festo Corporation
Automatable 2-way ball valve with compact flange. Stainless steel design. Short installed length. Blow-out proof shaft. Manual operation possible using hand lever. Flange to DIN 1092-1. Mounting flange to ISO 5211. Use in zone 1, 21, 2, 22 [See More]
- Actuation: Mechanical
- Media Temperature: 14 to 392
- Media: Water
- Primary Material: Stainless Steel; Steel
from Clippard
Shuttle Valve, All Ports 1/16" ID Hose [See More]
- Actuation: Mechanical
- Valve Size: 0.19
- Media: Water
- Maximum Pressure: 250.00
from DFT Inc.
The ALC ® is an in-line, spring assisted, single guided "wafer" check valve designed to prevent "water hammer" and "reverse" flow. The lightweight compact design fits between mating flanges and meets API 594 Face-to-Face dimensions. The ALC ® is an easy to maintain check valve for... [See More]
- Actuation: Mechanical
- Valve Size: 10.00 to 24.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater
- Maximum Pressure: 720.00
from Festo Corporation
Electropolished surfaces SFV4. PTFE seal with only little dead space. The high-performance ball valve for the pharmaceutical and cosmetics industry. FDA-compliant seal to FDA 21 CFR 177.1550 [See More]
- Actuation: Mechanical
- Media Temperature: -4 to 392
- Media: Water
- Primary Material: Stainless Steel; Steel
from Clippard
Shuttle Valve, All Ports 1/8" ID Hose [See More]
- Actuation: Mechanical
- Valve Size: 0.19
- Media: Water
- Maximum Pressure: 250.00
from DFT Inc.
The DFT ® Model WLC Wafer style Silent Check Valve is a lightweight, spring-assisted, in-line check valve that provides reliable, low maintenance service for a wide range of fluids and pressure/temperature combinations. The joint between the seat ring and body is sealed by the flange gasket upon... [See More]
- Actuation: Mechanical
- Valve Size: 1.00 to 10.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater
- Maximum Pressure: 6170.00
from Festo Corporation
Electropolished surfaces SFV4. PTFE seal with only little dead space. The high-performance ball valve for the pharmaceutical and cosmetics industry. FDA-compliant seal to FDA 21 CFR 177.1550 [See More]
- Actuation: Mechanical
- Media Temperature: -4 to 392
- Media: Water
- Primary Material: Stainless Steel; Steel
from Clippard
Shuttle Valve, #10-32 Female Outlet, (2) 1/16" ID Hose Inlets [See More]
- Actuation: Mechanical
- Valve Size: 0.19
- Media: Water
- Maximum Pressure: 250.00
from Festo Corporation
2-way manual, with optional lockable hand lever. 3-way, L-shaped or T-shaped hole, with optional lockable hand lever. Stainless steel design. Pipe thread to ASME B1.20.1 [See More]
- Actuation: Mechanical
- Media Temperature: -4 to 392
- Media: Water
- Primary Material: Stainless Steel; Steel
from Clippard
Shuttle Valve, #10-32 Female Outlet, (2) 1/8" ID Hose Inlets [See More]
- Actuation: Mechanical
- Valve Size: 0.19
- Media: Water
- Maximum Pressure: 250.00
from Festo Corporation
2-way manual, with optional lockable hand lever. 3-way, L-shaped or T-shaped hole, with optional lockable hand lever. Stainless steel design. Pipe thread to ASME B1.20.1 [See More]
- Actuation: Mechanical
- Media Temperature: -4 to 392
- Media: Water
- Primary Material: Stainless Steel; Steel
from Clippard
Shuttle Valve, All Ports #10-32 Female [See More]
- Actuation: Mechanical
- Valve Size: 0.19
- Media: Water
- Maximum Pressure: 250.00
from Alfa Laval Inc.
Specially designed for use in stainless steel pipe installations, LKC-2 non-return valves prevent the reverse flow of fluids. Widely used in various processes throughout the sanitary industry, these standard non-return valves are safe and highly reliable. Safe and reliable process protection. Alfa... [See More]
- Actuation: Mechanical
- Valve Size: 0.89 to 3.94
- Media: Water
- Maximum Pressure: 145.04
from A. u. K. Müller GmbH & Co. KG
2/2-way direct acting drain valve of nominal diameter DN 40 for controlling low aggressive liquid media, such as cleaning or disinfection agents, with normally closed operation mode NC (normally closed). Valves of this type are medium separated having a single chamber valve body with the inlet at... [See More]
- Actuation: Mechanical
- Maximum Pressure: 0.00 to 1.74
- Media: Water; Hot Water; Cold Water
- Media Temperature: 122 to 208
from AVK International A/S
AVK resilient seated gate valves are designed with a fully vulcanized rubber wedge and a lot of unique features ensuring optimum perfomance and high durability. We offer flanged gate valves in OS &Y design and with pin indicator as well as grooved end valves with pin indicator. UL/FM and VdS... [See More]
- Actuation: Manual; Mechanical
- Valve Size: 2.00 to 16.00
- Media: Water; Cold Water ; Potable Water
- Media Temperature: 158
from KSB AG
Flanged end non-return valve with spring-loaded check disc,maintenance-free, asbestos-free. Applications. Hot water heating systems, high-temperature hot water heating systems heat transfer systems. General steam applications in building services and industry. Other fluids on request. Overview of... [See More]
- Actuation: Mechanical
- Valve Size: 0.59 to 13.78
- Media: Water; Hot Water
- Maximum Pressure: 232.06
from DK-LOK U.S.A.
Up to 10000psig (689bar). SS316,Carbon Steel. Male pipe thread 1/8 - 1/2 inch. Vent the signal line pressure to atmosphere to assist in calibration of control valves or multi-valve manifolds. [See More]
- Actuation: Mechanical
- Valve Size: 0.12
- Media: Water
- Maximum Pressure: 10000.00
from Hayward Flow Control
SLC Series Y-Check valves are available in PVC only. Seals are FPM or EPDMand are offered in threaded body version only. True union end connections are available in socket or threaded styles. All valves are assembled with silicone free lubricant. Features. PVC. Full Flow Design. Closes with No Back... [See More]
- Actuation: Mechanical
- Valve Size: 0.50 to 4.00
- Media: Water; Ground Water; Potable Water; Wastewater
- Maximum Pressure: 150.00
from Cat Pumps - High Pressure Pumps & Systems
A Relief Valve, or Pop-Off Valve, is a secondary pressure regulating device used to back up the primary regulating device. If the primary regulating device fails to by-pass at a set system pressure, the relief valve will open and allow liquid to flow freely. A relief valve can save costly pump and... [See More]
- Actuation: Mechanical
- Valve Size: 2.00
- Media: Water
- Maximum Pressure: 150.00 to 400.00
from Watson McDaniel Company
The WSVB Safety Relief Valves are used for over-pressure protec- tion on unfired pressure vessels in saturated steam systems. As safety valves open on a non-compressible fluid applica- tion, the disc lifts directly proportional to the increase in system pressure over the valve set point. Safety... [See More]
- Actuation: Mechanical
- Valve Size: 0.50 to 0.75
- Media: Water
- Maximum Pressure: 250.00
from PT
Pump foot valve [See More]
- Actuation: Mechanical
- Valve Size: 1.50 to 8.00
- Media: Water; Wastewater
- Connection Description: Threaded; FNPT
from General Pipe Cleaners
Flood-Guard ™ operates like a check valve to seal off water back-up caused by overloaded sewers. Water flows normally through the drain until the sewer begins to back up. Then the Flood-Guard ™ float rises to seal off the drain opening until the water recedes. A screwdriver and a couple... [See More]
- Actuation: Mechanical
- Valve Size: 2.00 to 4.00
- Media: Water; Cold Water ; Ground Water; Wastewater
- Primary Material: Stainless Steel; Rubber
from Victaulic Co. of America
3-PIECE TYPE. 1-1/2 INCH NOMINAL SIZE. 1.5 NOMINAL SIZE - DECIMAL. 1-1/2 NOMINAL SIZE - FRACTIONAL. ANSI/NSF 61, UL APPLICABLE STANDARD. WATER APPLICATION. 86 TO 180 DEG F TEMPERATURE RATING. BLOW OUT PROOF STEM, RUGGED CONSTRUCTION, SELF ADJUSTING FLOATING BALL INCLUSIONS/FEATURES. 316 STAINLESS... [See More]
- Actuation: Manual; Mechanical
- Valve Size: 1.50
- Media: Water
- Media Temperature: 86 to 180
from Valcor Engineering Corporation
Description. Extreme reliability is inherent due to rugged design, simplicity of operation, and a minimum number of moving parts. Isolation standoffs prevent excessive heat transfer to the solenoid operator. Internal parts are contoured to retard buildup of contamination and sludge. Compact, light... [See More]
- Actuation: Mechanical
- Valve Size: 0.38 to 2.00
- Media: Water
- Maximum Pressure: 2500.00
from Spirax-Sarco
The DEP4 is a cast steel direct acting bellows sealed excess pressure valve. The standard version as an EPDM diaphragm (limited to 125 ° C) and is suitable for steam and water applications. Also available for oil applications is a Nitrile rubber diaphragm (suffix 'N ' i.e. DEP4B1N which is... [See More]
- Actuation: Mechanical
- Maximum Pressure: 4.35 to 217.56
- Media: Water
- Media Temperature: 572
from FITOK GmbH
Founded in 1998, FITOK Group has been an industry-leading developer and manufacturer of superior quality instrumentation valves and fittings, having our R &D centers, manufacturing facilities, warehousing and service locations in Offenbach Germany, Texas USA, Shenzhen China and Dubai UAE. We... [See More]
- Actuation: Manual; Mechanical
- Valve Size: 0.14 to 0.25
- Media: Water
- Maximum Pressure: 6000.00
from XOMOX (A Crane Co. Company)
As the innovator and leader in diaphragm valves, we continually develop our diaphragm technology and remain the only manufacturer to have complete ownership of the research and development, design and production involved. Saunders offers a full range of diaphragm selections engineered to meet the... [See More]
- Actuation: Mechanical; Electric; Pneumatic
- Valve Size: 1.50
- Media: Water; Cold Water ; Potable Water
- Primary Material: Brass / Bronze (optional feature); Ductile Iron (optional feature)
from SC Hydraulic Engineering Corporation
The ICV series inline check valves are available in four port sizes from 1/4" NPT to 1" NPT and are rated up to 15,000 psig working pressure. Constructed of Stainless steel for use with water as well as most industrial fluids. The ICV series check valve is a simple and effective component allowing... [See More]
- Actuation: Mechanical
- Valve Size: 0.25 to 1.00
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 15000.00
from Malema Sensors
The M-VF-F Series is designed PFA molded body suitable for semiconductor, ultra-pure water and aggressive chemical applications. Features: High reliability. Factory set. Low pressure drop. All mechanical. Right-angle flow. Flare type connection. Bubble tight seal [See More]
- Actuation: Mechanical
- Connection Description: Flare Type Connection
- Media: Water
- Valve Type: Relief
from DME Company
#9632; 1/4 turn on/off. ■ Fits close for tight installations. ■ Bottom loaded stem, blowout proof design. ■ Large port design/Rated to 400 PSI W.O.G. ■ PTFE stem packing & seats, viton seals. ■ Excellent flow compared to other valves in this class. ■ Forged... [See More]
- Actuation: Mechanical
- Valve Size: 0.12 to 0.50
- Media: Water; Cold Water ; Cooling Fluid
- Maximum Pressure: 400.00
from Harwood Engineering Company
Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave. These valves allow fluids to flow in only one direction and require a minimum pressure to open. Features. Service for liquids and gases at pressures up to 200,000... [See More]
- Actuation: Mechanical
- Maximum Pressure: 100000.00
- Media: Water
- Primary Material: Stainless Steel
from Mueller Company
bull; Meets or exceeds all applicable requirements of ANSI/AWWA C508 Standard. • Flanged end dimensions and drilling comply with ANSI B16.1, class 125. • Iron body, bronze mounted (IBBM). • Choice of gravity operated, lever and weight operated, or lever and spring operated valves. [See More]
- Actuation: Mechanical
- Valve Size: 2.00 to 12.00
- Media: Water; Potable Water
- Maximum Pressure: 200.00
from Armstrong International
When accurate control is desired from your steam or water applications, the Armstrong Python ® 1100 Series Control Valve will squeeze every bit of performance out of your system and deliver precise control. With a wide range of materials, s [See More]
- Actuation: Manual; Mechanical; ElectroPneumatic (optional feature); Pneumatic (optional feature)
- Valve Size: 0.50 to 2.00
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 300.00
from Equilibar, LLC.
Equilibar introduces a new type of vacuum regulator with more than 5X the flow stability of traditional spring regulators. That means that your vacuum process can remain stable even as gas flow rate changes over wide ranges. Can be used with manual set-point adjustment or computer automation. Is... [See More]
- Actuation: Mechanical; Pilot
- Valve Size: 0.25 to 4.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater
- Maximum Pressure: 0.00 to 14.74
from Mueller Steam Specialty
Recommended for use in higher temperature or pressure applications. [See More]
- Actuation: Mechanical
- Valve Size: 2.00 to 4.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater (optional feature); High Temp and Pressure Applications
- Maximum Pressure: 1430.00 to 2000.00
from Curtiss-Wright, Valve Group
Curtis Wright provides a variety of industrial grade gate valves that meet the harsh environments suitable for applications such as power and oil, petrochemical, hydrocarbon service, seawater cooling systems, offshore applications. Curtiss-Wright gate valves are supplied through their Phonix or... [See More]
- Actuation: Manual; Mechanical; Electric; Pneumatic (optional feature)
- Valve Size: 0.50 to 30.00
- Media: Water; Hot Water; For chemical plants, petrochemical plants and offshore power plants
- Media Temperature: -321 to 1472
from Xylem Applied Water Systems
Water Pressure Regulator Inline. FLOJETS 1750 series Water Pressure Regulator reduces inlet water pressure to safe levels for pumps and appliances. Equipment is additionally protected from water-borne debris and particulates by the regulator's removable, cleanable inlet screen. Models are available... [See More]
- Actuation: Mechanical
- Valve Size: 0.50
- Media: Water; Potable Water; Beverages
- Media Temperature: 150
from G.I.E. Inc.
Mounts horizontally or vertical, excellent solids handling, tight shut-off. Cast body and molded lining. [See More]
- Actuation: Mechanical
- Valve Size: 0.50 to 8.00
- Media: Water
- Maximum Pressure: 150.00
from A. u. K. Müller GmbH & Co. KG
2/2-way direct acting dump valve of nominal diameter DN 50 for controlling low aggressive liquid media, such as cleaning or disinfection agents, direct acting with normally closed operation mode NC (normally closed). Valves of this type are medium separated having a single chamber valve body with... [See More]
- Actuation: Mechanical
- Maximum Pressure: 0.00 to 1.74
- Media: Water; Hot Water; Cold Water
- Media Temperature: 122 to 208
from KSB AG
Flanged end swing check valve with or without lining, soft-seated, no dead volumes; in straight-way pattern with slanted seat; with internal hinge pin and soft rubber coated disc. Applications. In building services, industrial plants and power stations;suitable for drinking water, service water,... [See More]
- Actuation: Mechanical
- Valve Size: 0.98 to 5.91
- Media: Water; Potable Water
- Maximum Pressure: 232.06
from DK-LOK U.S.A.
Up to 6000psig (413bar). Up to 204 ℃ (400 ℉). SS316. Cracking pressure 50 to 6000psing (3.4 to 413bar). DK-LOK OD 1/4 - 1/2 inch. Pipe thread 1/4 - 1/2 inch [See More]
- Actuation: Mechanical
- Valve Size: 0.19
- Media: Water
- Maximum Pressure: 3000.00
from Hayward Flow Control
TC Series true union ball check valves are offered in PVC, Corzan CPVC, and PP. O-rings and seats are FPM or EPDM. 1/4 in. and 3/8 in. sizes are PVConly and are trim check design. They have socket or threaded end connections. Others up to 2 in. sizes have socket and threaded end connections. All... [See More]
- Actuation: Mechanical
- Valve Size: 0.25 to 6.00
- Media: Water; Ground Water; Potable Water
- Maximum Pressure: 150.00
from Cat Pumps - High Pressure Pumps & Systems
An Inlet Pressure Stabilizer (or Captive Acceleration Tube) is used to maintain consistent inlet pressure to the pump. The internal flexible tube absorbs energy from a pressurized feed which maintains a consistent pressure and flow through pump inlet. Having consistent inlet conditions will improve... [See More]
- Actuation: Mechanical
- Valve Size: 0.50
- Media: Water
- Maximum Pressure: 2.00 to 50.00
from Victaulic Co. of America
3-PIECE TYPE. 2 INCH NOMINAL SIZE. 2 NOMINAL SIZE - DECIMAL. 2 NOMINAL SIZE - FRACTIONAL. ANSI/NSF 61, UL APPLICABLE STANDARD. WATER APPLICATION. 86 TO 180 DEG F TEMPERATURE RATING. BLOW OUT PROOF STEM, RUGGED CONSTRUCTION, SELF ADJUSTING FLOATING BALL INCLUSIONS/FEATURES. 316 STAINLESS STEEL BODY... [See More]
- Actuation: Manual; Mechanical
- Valve Size: 2.00
- Media: Water
- Maximum Pressure: 400.00
from Valcor Engineering Corporation
Description. Extreme reliability is inherent due to rugged design, simplicity of operation, and a minimum number of moving parts. Isolation standoffs prevent excessive heat transfer to the solenoid operator. Internal parts are contoured to retard buildup of contamination and sludge. Compact, light... [See More]
- Actuation: Mechanical
- Valve Size: 0.38 to 3.00
- Media: Water
- Maximum Pressure: 2500.00
from Spirax-Sarco
The DRV4 is a cast steel direct acting bellows sealed pressure reducing valve. The standard version has an EPDM diaphragm and is suitable for steam, water and air applications. The DRV4 is available with a Nitrile rubber diaphragm (suffix 'N ') for oil applications. A Nitrile rubber soft seated... [See More]
- Actuation: Mechanical
- Maximum Pressure: 580.15
- Media: Water
- Media Temperature: 572
from SC Hydraulic Engineering Corporation
SC Pressure Release Valves are available in normally open and normally closed configurations. All of the valves are air actuated and are compatible with most fluids including water and synthetic compounds. Seals are Buna-N as standard (-N). Substitute "-V" for Viton® seals or "-E" for EPR.Typically,... [See More]
- Actuation: Mechanical
- Valve Size: 0.25
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 5000.00
from Harwood Engineering Company
Features. Service for liquids and gases for pressures up to 200,000 psi. Hydraulically-operated. Replaceable seat and packings. Hydraulic control pressure of 1,000-1,500 psi. Hydraulic control ports are ¼NPT. Options. Stainless steel valves for water service. Custom design available. [See More]
- Actuation: Mechanical; Hydraulic
- Maximum Pressure: 200000.00
- Media: Water
- Primary Material: Stainless Steel
from Mueller Company
bull; Meets or exceeds all applicable requirements of ANSI/AWWA C508 Standard. • Flanged end dimensions and drilling comply with ANSI B16.1, class 125. • Iron body, bronze mounted (IBBM). • Choice of gravity operated, lever and weight operated, or lever and spring operated valves. [See More]
- Actuation: Manual; Mechanical
- Valve Size: 2.00 to 12.00
- Media: Water; Potable Water
- Maximum Pressure: 200.00
from Armstrong International
Armstrong offers a stainless steel sump ejector for use in draining unwanted water from steam pits, steam tunnels or enclosed spaces. The stainless steel sump ejector uses a snap-acting Inconel X-750 spring-assisted mechanism, which engages a steam motive valve, turning the pump on or off as the... [See More]
- Actuation: Mechanical
- Valve Size: 0.75
- Media: Water; Hot Water
- Maximum Pressure: 40.00 to 175.00
from Equilibar, LLC.
Precision Back Pressure Regulator for Hygienic Service. For gas, liquid and mixed phase processes. Wide Range of working Pressures and Flows. Rugged 316 stainless steel Bar Stock Design with no Welded Fittings. Hygienic: No Crevices, <32Ra Finish. 3 Piece Low Dead Volume Design. Ports are the... [See More]
- Actuation: Mechanical; Pilot
- Valve Size: 0.50
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater
- Maximum Pressure: 0.00 to 150.00
from Mueller Steam Specialty
Designed for liquids and gases where flow reversal can cause surge and water hammer. Used extensively in pump suction and discharge applications. [See More]
- Actuation: Mechanical
- Valve Size: 1.00 to 10.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater (optional feature)
- Maximum Pressure: ? to 225.00
from G.I.E. Inc.
Features and Options: Guided Ball for troble free performance. Large open area for flow, results in lower pressure drops. Variety of Corrosion resistantplastic linings for excellent protection in wide range of service conditions. Lined ball with metal insert can be provided on request instead... [See More]
- Actuation: Mechanical
- Valve Size: 0.50
- Media: Water
- Primary Material: Ductile Iron; ASTM A394
from A. u. K. Müller GmbH & Co. KG
Servo-controlled valve nominal diameter DN 10, which closes by means of buoyancy of a floater to control level in tanks. If liquid is drained from the tank, the float valve refills automatically and closes when the maximum level has been reached. The outlet jet is directed on to a guide, which... [See More]
- Actuation: Mechanical
- Valve Size: 0.39
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 4.35 to 145.04
from KSB AG
Flanged end swing check valve with or without lining, soft-seated, no dead volumes; in straight-way pattern with slanted seat; with internal hinge pin and soft rubber coated disc. Applications. In building services, industrial plants and power stations;suitable for drinking water, service water,... [See More]
- Actuation: Mechanical
- Valve Size: 0.98 to 11.81
- Media: Water; Potable Water
- Maximum Pressure: 232.06 to 884.73
from Hayward Flow Control
YC Series y-check valves are offered in PVC and Corzan CPVC. O-rings are FPM standard but EPDM is available. All sizes are either socket, threaded or flanged body style. True union socket or threaded end connections are available. For spring-loaded y-check valves, see the SLC Series. All valves are... [See More]
- Actuation: Mechanical
- Valve Size: 0.50 to 4.00
- Media: Water; Ground Water; Potable Water; Wastewater
- Maximum Pressure: 150.00
from Cat Pumps - High Pressure Pumps & Systems
A Relief Valve, or Pop-Off Valve, is a secondary pressure regulating device used to back up the primary regulating device. If the primary regulating device fails to by-pass at a set system pressure, the relief valve will open and allow liquid to flow freely. A relief valve can save costly pump and... [See More]
- Actuation: Mechanical
- Valve Size: 0.75
- Media: Water
- Maximum Pressure: 100.00 to 2600.00
from Victaulic Co. of America
GROOVED TYPE. 1-1/2 INCH NOMINAL SIZE. 1.5 NOMINAL SIZE - DECIMAL. 1-1/2 NOMINAL SIZE - FRACTIONAL. CHEMICAL SERVICE, DILUTE ACID, WATER APPLICATION. -30 TO 230 DEG F TEMPERATURE RATING. BUBBLE TIGHT SHUT-OFF INCLUSIONS/FEATURES. ELECTROPLATED CARBON STEEL BODY MATERIAL. 200 PSI PRESSURE RATING. [See More]
- Actuation: Manual; Mechanical
- Valve Size: 1.50
- Media: Water
- Maximum Pressure: 200.00
from Valcor Engineering Corporation
The SV111 is a spring-activated check valve with disc type seating. It has a relatively low, yet realistic rated cracking pressure, resulting in quick response to changes in fluid pressure. The optically flat PTFE seal disc and seat provides drip tight sealing on most fluids. It ’s small... [See More]
- Actuation: Mechanical
- Valve Size: 0.25
- Media: Water; Ink & Toner in Printing Ink Systems
- Maximum Pressure: 100.00
from Spirax-Sarco
The DRV4 is a cast steel direct acting bellows sealed pressure reducing valve. The standard version has an EPDM diaphragm and is suitable for steam, water and air applications. The DRV4 is available with a Nitrile rubber diaphragm (suffix 'N ') for oil applications. A Nitrile rubber soft seated... [See More]
- Actuation: Mechanical
- Maximum Pressure: 580.15
- Media: Water
- Media Temperature: 194
from SC Hydraulic Engineering Corporation
The DRV series adjustable hydraulic relief valves are available in five pressure ranges between 100 psig and 60,000 psig. Constructed of Stainless steel the valves can be used for most industrial fluids including water. The valve once set will not allow system pressure to exceed design limitations. [See More]
- Actuation: Mechanical
- Valve Size: 0.25
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 1000.00
from Equilibar, LLC.
Precision Back Pressure Regulator. For gas & mixed phase processes. Rugged Bar Stock Design. Available in ¼ inch through 1 inch sizes. SS316 standard with Hastelloy C optional. Diaphragms available in PTFE, Hastelloy, SS316, and polyimide. The GS series is specifically designed for a... [See More]
- Actuation: Mechanical; Pilot
- Valve Size: 0.12 to 1.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater
- Maximum Pressure: 0.00 to 2500.00
from Mueller Steam Specialty
Designed for liquids and gases where flow reversal can cause surge and water hammer. Used extensively in pump suction and discharge applications. [See More]
- Actuation: Mechanical
- Valve Size: 2.00 to 30.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater (optional feature)
- Maximum Pressure: ? to 1480.00
from A. u. K. Müller GmbH & Co. KG
Servo-controlled valve nominal diameter DN 10, which closes by means of buoyancy of a floater to control level in tanks. If liquid is drained from the tank, the float valve refills automatically and closes when the maximum level has been reached. While water level and floater rises, the flow into... [See More]
- Actuation: Mechanical
- Valve Size: 0.39
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 4.35 to 145.04
from KSB AG
Weld end non-return valve in straight-way pattern, made of steel or stainless steel. Applications. Feed water and live steam systems. Overview of technical data. Actuator options available ex works. No. Body design. Straight pattern body. Valve disc/plug material. Metal- to-metal seat. Threaded-end... [See More]
- Actuation: Mechanical
- Valve Size: 0.59 to 1.97
- Media: Water
- Maximum Pressure: 3045.79
from Cat Pumps - High Pressure Pumps & Systems
This Pressure Regulator is designed for single or multiple pump, weep or multi-nozzle systems. It is constructed of 316SS. This is a flow-thru design easily plumbed into the discharge line or directly onto the discharge head. This regulator maintains set system pressure even when only one of several... [See More]
- Actuation: Mechanical
- Valve Size: 0.37
- Media: Water
- Maximum Pressure: 100.00 to 3000.00
from Spirax-Sarco
The SV615 full lift, full nozzle safety valve is suitable for steam, air, inert industrial gas and non-hazardous liquid service. [See More]
- Actuation: Mechanical
- Maximum Pressure: 203.05 to 261.07
- Media: Water; Non-hazardous Liquid
- Media Temperature: 248 to 446
from Equilibar, LLC.
Standard Pressure Range: 0.02 (.5 ” WC) to 1500 psig. Ultra Low to Zero flow performance. Standard Cv from 1E-11 to 0.01. Standard 316L Stainless Steel Body; Hastelloy C and PTFE also available. NPT, VCR/VCO type and Valco (low dead volume) ends available. Wide Variety of Diaphragms Including... [See More]
- Actuation: Mechanical; Pilot
- Valve Size: 0.12
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater
- Maximum Pressure: 0.00 to 3000.00
from Mueller Steam Specialty
Designed for liquids and gases where flow reversal can cause surge and water hammer. Used extensively in pump suction and discharge applications. [See More]
- Actuation: Mechanical
- Valve Size: 1.00 to 10.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater (optional feature)
- Maximum Pressure: ? to 1480.00
from A. u. K. Müller GmbH & Co. KG
Servo-controlled valve nominal diameter DN 10, which closes by means of buoyancy of a floater to control level in tanks. If liquid is drained from the tank, the float valve refills automatically and closes when the maximum level has been reached. While water level and floater rises, the flow into... [See More]
- Actuation: Mechanical
- Valve Size: 0.39
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 4.35 to 145.04
from KSB AG
Weld end swing check valve with bolted cover, internal hinge pin, forged body, made of steel or stainless steel. Applications. Safety feed, feed water, live steam and condensate systems. Overview of technical data. Actuator options available ex works. No. Valve disc/plug material. Metal- to-metal... [See More]
- Actuation: Mechanical
- Valve Size: 1.97 to 23.62
- Media: Water
- Maximum Pressure: 4641.21
from Cat Pumps - High Pressure Pumps & Systems
This Pressure Regulator is designed for single or multiple pump, weep or multi-nozzle systems. It is constructed of 316SS. This is a flow-thru design easily plumbed into the discharge line or directly onto the discharge head. This regulator maintains set system pressure even when only one of several... [See More]
- Actuation: Mechanical
- Valve Size: 0.37
- Media: Water
- Maximum Pressure: 100.00 to 4000.00
from Spirax-Sarco
The LRV2B and LRV2S are direct acting pressure reducing valves suitable for liquid applications. [See More]
- Actuation: Mechanical
- Valve Size: 0.50 to 1.00
- Media: Water; Liquid
- Maximum Pressure: 362.59
from Equilibar, LLC.
Precision Back Pressure Regulator. For liquid, gas & mixed phase processes. SS316 Rugged Bar Stock Design. Unique Chatter Suppression Feature in liquid only applications. High Precision and sensitivity. PTFE, stainless steel, and Hastelloy diaphragms available. The NL series back pressure... [See More]
- Actuation: Mechanical; Pilot
- Valve Size: 1.00 to 4.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater
- Maximum Pressure: 0.00 to 500.00
from Mueller Steam Specialty
Designed for liquids and gases where flow reversal can cause surge and water hammer. Used extensively in pump suction and discharge. [See More]
- Actuation: Mechanical
- Valve Size: 2.00 to 30.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater (optional feature)
- Maximum Pressure: 150.00 to 200.00
from A. u. K. Müller GmbH & Co. KG
Servo-controlled valve nominal diameter DN 13, which closes by means of buoyancy of a floater to control level in tanks. If liquid is drained from the tank, the float valve refills automatically and closes when the maximum level has been reached. The outlet jet is directed on to a guide, which... [See More]
- Actuation: Mechanical
- Valve Size: 0.51
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 4.35 to 145.04
from Cat Pumps - High Pressure Pumps & Systems
This Stainless Steel Pressure Sensitive Regulating Unloader is designed for single or multiple pump, weep or multi-nozzle systems. This unloader maintains set system pressure and goes into by-pass with the release of the trigger or an obstruction downstream. Pressure is held in the line during... [See More]
- Actuation: Mechanical
- Valve Size: 0.50
- Media: Water
- Maximum Pressure: 400.00 to 2200.00
from Spirax-Sarco
The SRV66HC all stainless steel sanitary pressure reducing valve is a double seated, high capacity, spring loaded proportional control valve which also benefits from having a quick release body clamp ring. It is designed for hygienic applications in the food processing, brewing/beverage and... [See More]
- Actuation: Mechanical
- Maximum Pressure: 220.46
- Media: Water
- Media Temperature: 572
from Mueller Steam Specialty
Designed for liquids and gases where flow reversal can cause surge and water hammer. Elastomer seats provide bubble-tight shutoff. [See More]
- Actuation: Mechanical
- Valve Size: 2.00 to 54.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater (optional feature)
- Maximum Pressure: 100.00 to 200.00
from A. u. K. Müller GmbH & Co. KG
Servo-controlled valve nominal diameter DN 13, which closes by means of buoyancy of a floater to control level in tanks. If liquid is drained from the tank, the float valve refills automatically and closes when the maximum level has been reached. While water level and floater rises, the flow into... [See More]
- Actuation: Mechanical
- Valve Size: 0.51
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 4.35 to 145.04
from Cat Pumps - High Pressure Pumps & Systems
This Pressure Sensitive Regulating Unloader is designed for single or multiple pump, weep or multi-nozzle systems. This unloader maintains set system pressure and goes into by-pass with the release of the trigger or an obstruction downstream. Pressure is held in the line during by-pass with full... [See More]
- Actuation: Mechanical
- Valve Size: 0.50
- Media: Water
- Maximum Pressure: 400.00 to 2200.00
from Spirax-Sarco
The SV60 is a range of full lift flanged safety valves suitable for use on steam, inert industrial gas and water services. Please contact Spirax Sarco for suitability of any other media. [See More]
- Actuation: Mechanical
- Maximum Pressure: 2.90
- Media: Water
- Media Temperature: 662 to 752
from Mueller Steam Specialty
Can be used in a variety of applications including: chilled and hot water systems, refrigeration, plumbing, air conditioning, gas and liquid applications, water filtration, oxygen systems, boiler feed lines, centrifugal pump and compressor systems and process applications. [See More]
- Actuation: Mechanical
- Valve Size: 2.00 to 36.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater; Process Industries, Construction
- Maximum Pressure: 195.00 to 275.00
from A. u. K. Müller GmbH & Co. KG
Servo-controlled valve nominal diameter DN 13, which closes by means of buoyancy of a floater to control level in tanks. If liquid is drained from the tank, the float valve refills automatically and closes when the maximum level has been reached. While water level and floater rises, the flow into... [See More]
- Actuation: Mechanical
- Valve Size: 0.51
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 4.35 to 145.04
from Cat Pumps - High Pressure Pumps & Systems
This Pressure Sensitive Regulating Unloader is designed for single or multiple pump, weep or multi-nozzle systems. This unloader maintains set system pressure and goes into by-pass with the release of the trigger or an obstruction downstream. Pressure is held in the line during by-pass with full... [See More]
- Actuation: Mechanical
- Valve Size: 0.50
- Media: Water
- Maximum Pressure: 800.00 to 4000.00
from Spirax-Sarco
The SV60H is a range of full lift safety valves suitable for the protection of hot water generators. The construction is characterised by an EPDM bellows and elastomer seat seal to ensure leak free operation. [See More]
- Actuation: Mechanical
- Maximum Pressure: 145.04
- Media: Water; Hot Water
- Media Temperature: 248
from Mueller Steam Specialty
Designed for liquids and gases where flow reversal can cause surge and water hammer. [See More]
- Actuation: Mechanical
- Valve Size: 1.50 to 12.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater (optional feature)
- Maximum Pressure: ? to 150.00
from A. u. K. Müller GmbH & Co. KG
This servo-controlled valve has an orifice size of 13 mm and is operated by means of a float to control the level in a tank. If liquid is drained from the tank, the float valve opens automatically and then closes when the maximum level has been reached. Whilst the water level and float rise, the... [See More]
- Actuation: Mechanical
- Valve Size: 0.51
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 11.60 to 145.04
from Cat Pumps - High Pressure Pumps & Systems
This Pressure Sensitive Regulating Unloader is designed for single or multiple pump, weep or multi-nozzle systems. This unloader maintains set system pressure and goes into by-pass with the release of the trigger or an obstruction downstream. Pressure is held in the line during by-pass with full... [See More]
- Actuation: Mechanical
- Valve Size: 1.00
- Media: Water
- Maximum Pressure: 400.00 to 2175.00
from Spirax-Sarco
The SRV66 is an angle pattern self-draining sanitary pressure regulating valve of all 316 type stainless steel construction suitable for use on steam, water and inert industrial gases. It is available with hygienic sanitary clamp compatible connections to ISO 2852, requires no external pressure... [See More]
- Actuation: Mechanical
- Maximum Pressure: 137.79
- Media: Water
- Media Temperature: 572
from Mueller Steam Specialty
Designed for liquids and gases where flow reversal can cause surge and water hammer. [See More]
- Actuation: Mechanical
- Valve Size: 1.50 to 12.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater (optional feature)
- Maximum Pressure: ? to 150.00
from A. u. K. Müller GmbH & Co. KG
Servo-controlled valve nominal diameter DN 17, which closes by means of buoyancy of a floater to control level in tanks. If liquid is drained from the tank, the float valve refills automatically and closes when the maximum level has been reached. While water level and floater rises, the flow into... [See More]
- Actuation: Mechanical
- Valve Size: 0.67
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 4.35 to 145.04
from Cat Pumps - High Pressure Pumps & Systems
A Relief Valve, or Pop-Off Valve, is a secondary pressure regulating device used to back up the primary regulating device. If the primary regulating device fails to by-pass at a set system pressure, the relief valve will open and allow liquid to flow freely. A relief valve can save costly pump and... [See More]
- Actuation: Mechanical
- Valve Size: 0.37
- Media: Water
- Maximum Pressure: 300.00 to 1500.00
from Spirax-Sarco
The DEP7 is an SG iron direct acting bellows sealed excess pressure valve. The standard version has an EPDM diaphragm limited to 125 ° C and is suitable for steam and water applications. Also available for oil applications is a Nitrile rubber diaphragm (suffix 'N ' i.e. DEP7B1N which is limited... [See More]
- Actuation: Mechanical
- Valve Size: 0.50 to 2.00
- Media: Water
- Maximum Pressure: 145.04 to 232.06
from Mueller Steam Specialty
Designed for installation in pump discharge piping where it performs triple duty. It acts as a spring loaded silent check valve, a shutoff valve, and a balancing valve. Used in conjunction with the Mueller Steam Specialty suction diffuser, it constitutes a compact and effective complete pump... [See More]
- Actuation: Mechanical
- Valve Size: 2.00 to 14.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water
- Maximum Pressure: 110.00 to 640.00
from A. u. K. Müller GmbH & Co. KG
This servo-controlled valve has an orifice size of 17 mm and is operated by means of a float to control the level in a tank. If liquid is drained from the tank, the float valve opens automatically and then closes when the maximum level has been reached. Whilst the water level and float rise, the... [See More]
- Actuation: Mechanical
- Valve Size: 0.67
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 11.60 to 145.04
from Cat Pumps - High Pressure Pumps & Systems
This Pressure Regulator is designed for single or multiple pump, weep or multi-nozzle systems. This is a flow-thru design easily plumbed into the discharge line or directly onto the discharge head. This regulator maintains set system pressure even when only one of several guns or nozzles is... [See More]
- Actuation: Mechanical
- Valve Size: 0.50
- Media: Water
- Maximum Pressure: 100.00 to 1000.00
from Spirax-Sarco
The DRV7 is an SG iron direct acting bellows sealed pressure reducing valve. The standard version has an EPDM diaphragm and is suitable for steam, water and air applications. The DRV7 is available with a Nitrile rubber diaphragm (suffix ' N ') for oil applications. A Nitrile rubber soft seated... [See More]
- Actuation: Mechanical
- Valve Size: 0.50 to 2.00
- Media: Water; Oil
- Maximum Pressure: 362.59
from Mueller Steam Specialty
Designed for installation in pump discharge piping where it performs triple duty. It acts as a spring loaded silent check valve, a shutoff valve, and a balancing valve. Used in conjunction with the Mueller Steam Specialty suction diffuser, it constitutes a compact and effective complete pump... [See More]
- Actuation: Mechanical
- Valve Size: 2.00 to 14.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water
- Maximum Pressure: 110.00 to 640.00
from A. u. K. Müller GmbH & Co. KG
The pressure regulator converts variable inlet pressures into a lower, constant outlet pressure. It can be used to protect equipment from high or inconsistent incoming medium pressure. This reduced and constant outlet pressure also enables a constant flow rate to be achieved independently of the... [See More]
- Actuation: Mechanical
- Maximum Pressure: 232.06
- Media: Water; Hot Water; Cold Water
- Media Temperature: 176
from Cat Pumps - High Pressure Pumps & Systems
This Pressure Regulator is designed for single or multiple pump, weep or multi-nozzle systems. This design easily plumbed into the discharge line or directly onto the discharge head using a tee fitting. This regulator maintains set system pressure even when only one of several guns or nozzles is... [See More]
- Actuation: Mechanical
- Valve Size: 0.25
- Media: Water
- Maximum Pressure: 205.00 to 2300.00
from Spirax-Sarco
The DRV7 is an SG iron direct acting bellows sealed pressure reducing valve. The standard version has an EPDM diaphragm and is suitable for steam, water and air applications. The DRV7 is available with a Nitrile rubber diaphragm (suffix ' N ') for oil applications. A Nitrile rubber soft seated... [See More]
- Actuation: Mechanical
- Valve Size: 0.50 to 2.00
- Media: Water; Oil
- Maximum Pressure: 362.59
from Mueller Steam Specialty
Can be used in a variety of applications including: chilled and hot water systems, refrigeration, plumbing, air conditioning, gas and liquid applications, water filtration, oxygen systems, boiler feed lines, and centrifugal pump and compressor systems. [See More]
- Actuation: Mechanical
- Valve Size: 2.00 to 36.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater (optional feature); Refrigeration, Plumbing
- Maximum Pressure: 150.00 to 190.00
from A. u. K. Müller GmbH & Co. KG
The pressure regulator converts variable inlet pressure into a lower, constant outlet pressure. It can be used to protect equipment from high or inconsistent incoming medium pressure. This reduced and constant outlet pressure also enables a constant flow rate to be achieved independently of the... [See More]
- Actuation: Mechanical
- Maximum Pressure: 43.51 to 145.04
- Media: Water; Hot Water; Cold Water
- Media Temperature: 194
from Cat Pumps - High Pressure Pumps & Systems
This Pressure Regulating Unloader is designed for single gun or pump operation. This unloader maintains set system pressure and goes into by-pass with the release of the trigger or an obstruction downstream. The pressure sensitive feature permits a wide range of flows and quickly resumes full... [See More]
- Actuation: Mechanical
- Valve Size: 0.37
- Media: Water
- Maximum Pressure: 100.00 to 2000.00
from Spirax-Sarco
Types SRV461S and SRV463S are direct acting pressure reducing valves with all wetted parts in AISI 316L /1.4404, 1.4408 and 1.4462 stainless steel. For steam, liquid or gas applications. Typical applications include: Clean steam, gas and liquid supplies to centrifuges, freeze dryers, sterilisers,... [See More]
- Actuation: Mechanical
- Valve Size: 0.50 to 2.00
- Media: Water; Liquid
- Maximum Pressure: 551.14
from Mueller Steam Specialty
Can be used in a variety of applications including: chilled and hot water systems, refrigeration, plumbing, air conditioning, gas and liquid applications, water filtration, oxygen systems, boiler feed lines, and centrifugal pump and compressor systems. [See More]
- Actuation: Mechanical
- Valve Size: 2.00 to 24.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater (optional feature); Refrigeration, Plumbing
- Maximum Pressure: 200.00 to 500.00
from A. u. K. Müller GmbH & Co. KG
Float valves are commonly used in industrial applications to maintain a constant level in a tank. For cleaning purposes the tank is often drained and the water supply has to be isolated to prevent the float valve automatically refilling the tank. By incorporating a normally closed servo-controlled... [See More]
- Actuation: Mechanical; Electric
- Valve Size: 0.39
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 4.35 to 145.04
from Cat Pumps - High Pressure Pumps & Systems
A Relief Valve, or Pop-Off Valve, is a secondary pressure regulating device used to back up the primary regulating device. If the primary regulating device fails to by-pass at a set system pressure, the relief valve will open and allow liquid to flow freely. A relief valve can save costly pump and... [See More]
- Actuation: Mechanical
- Valve Size: 0.37
- Media: Water
- Maximum Pressure: 100.00 to 15000.00
from Spirax-Sarco
Types SRV461S and SRV463S are direct acting pressure reducing valves with all wetted parts in AISI 316L /1.4404, 1.4408 and 1.4462 stainless steel. For steam, liquid or gas applications. Typical applications include: Clean steam, gas and liquid supplies to centrifuges, freeze dryers, sterilisers,... [See More]
- Actuation: Mechanical
- Maximum Pressure: 220.46
- Media: Water; Liquid
- Media Temperature: 572
from Mueller Steam Specialty
Designed to prevent surge, backflow, and water hammer in liquid service. These check valves are available in cast iron, bronze or stainless steel, pressure and temperature conditions will dictate the appropriate body material. For air and gas applications, consult factory. [See More]
- Actuation: Mechanical
- Valve Size: 0.25 to 2.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water
- Maximum Pressure: 200.00 to 600.00
from Cat Pumps - High Pressure Pumps & Systems
A Thermal Valve is used to eliminate heat build-up in a closed loop by-pass system when liquid is being returned to the pump inlet. Thermal Valves can only be installed when there is a pressurized pump inlet. During recirculation of by-pass liquid, the thermal valve will detect temperature rises in... [See More]
- Actuation: Mechanical
- Maximum Pressure: 0.00 to 125.00
- Media: Water
- Connection Description: Threaded
from Spirax-Sarco
The SVL606 is a stainless steel, full lift T ÜV approved flanged safety valve suitable for use with steam, gas and liquids. [See More]
- Actuation: Mechanical
- Maximum Pressure: 101.53 to 580.15
- Media: Water; Liquid
- Media Temperature: 266 to 572
from Mueller Steam Specialty
Designed for liquids and gases where flow reversal can cause surge and water hammer. [See More]
- Actuation: Mechanical
- Valve Size: 2.00 to 12.00
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater (optional feature)
- Maximum Pressure: 640.00 to 1480.00