Isolated Digital Input Data Acquisition
from AMETEK Programmable Power
16-Channel isolated high voltage measurement instrument. 24-bit SAR ADC per Channel. 128k samples/second/channel sample rate. 1000V channel-channel isolation. 500V channel-ground isolation. Input voltage ranges peak: ±420V/ ±10V/ ±1V. Data logger acquisition mode. 3-Pin screw... [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: Rack Mount
- Data Acquisition: DAQ Instrument; Datalogger
- Analog Channels: 16
from Dataforth Corporation
The MAQ20-DIOL discrete input/output module has 5 isolated discrete input channels and 5 isolated discrete output channels. Input channels accept 3-60VDC signals and output channels switch 3-60VDC signals at up to 3A load. The MAQ20-DIOH discrete input/output module has 4 isolated discrete inputs... [See More]
- Isolation: Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: DIN Rail
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 5
from Advantech
16-ch Isolated Digital I/O Module with LED. I/O Type: 8 DO & 8 DI. Optical Isolation: 2500 Vdc. Power Consumption: 0.68 W (Typical). 16-channel [See More]
- Isolation: Isolated Digital Inputs; Isolated Digital Outputs
- Data Acquisition: Input/Output Module
from Yaskawa America, Inc. - Motion Division
Features. Easy Web Insterface. Every VIPA SLIO E/IP and Modbus TCP Fieldbus module has a web interface for displaying diagnostic information and status of attached modules. A simple connection of your network allows remote access to your VIPA SLIO modules. High Speed Backpland Bus. Achieve reaction... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Modular Bay or Slot System
- Data Acquisition: Input Module
- Digital I/O Channels: 2
from ABB Measurement & Analytics
A fully sealed IP66 and NEMA 4X enclosure ensures full protection against water and dust ingress, making the SM500F ideal for hose-down and dirty applications in even the most hostile environments. A choice of mounting options together with an ultra-slim design means the recorder can be installed in... [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Analog Voltage Input; Isolated Analog Voltage Output; Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: Panel / Chassis Mount; Wall, Pipe, Field Mountable
- Data Acquisition: Chart Recorder
- Analog Channels: 4
from Dataforth Corporation
The MAQ20-DIOL discrete input/output module has 5 isolated discrete input channels and 5 isolated discrete output channels. Input channels accept 3-60VDC signals and output channels switch 3-60VDC signals at up to 3A load. The MAQ20-DIOH discrete input/output module has 4 isolated discrete inputs... [See More]
- Isolation: Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: DIN Rail
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 4
from Advantech
16-ch Isolated Digital Input and 16-ch Isolated Digital Output EtherCAT Remote I/O Module. Suitable for EtherCAT networks. 16-ch digital input and 16-ch digital output with 2,500 VDC isolation. Wide input voltage range (10 ~ 30 VDC). Wide output voltage range (5 ~ 40 VDC) and high output current... [See More]
- Isolation: Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: DIN Rail; DIN-rail
- Data Acquisition: Input Module; Output Module; Input/Output Module
- DC Voltage: Logic level 0: 3 V max. Logic level 1: 10~30 VDC
from ABB Measurement & Analytics
The RVG200 recorder takes the established operating and security benefits of the ScreenMaster range one step further. Features include touchscreen ‘swipe ’ operation, front and rear USB ports for connecting peripheral devices (including a barcode scanner and keyboard) and Ethernet and... [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Analog Voltage Input; Isolated Analog Voltage Output; Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Chart Recorder
- Analog Channels: 24
from Dataforth Corporation
The 8B isoLynx ® SLX300 - Dataforth's newly introduced data acquisition system - builds on the proven reliability and outstanding performance of the SCM5B isoLynx ® SLX200 and the miniature-sized SensorLex ® 8B isolated signal conditioning modules to provide a compact, low cost solution... [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Analog Voltage Input; Isolated Analog Voltage Output; Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: PC Board; Panel / Chassis Mount (optional feature); DIN Rail (optional feature)
- Data Acquisition: DAQ Instrument; Input/Output Module
- Analog Channels: 12
from Advantech
16-ch Isolated Digital Input and 16-ch Isolated Digital Output EtherCAT Remote I/O Module. Suitable for EtherCAT networks. 16-ch digital input and 16-ch digital output with 2,500 VDC isolation. Wide input voltage range (10 ~ 30 VDC). Wide output voltage range (5 ~ 40 VDC) and high output current... [See More]
- Isolation: Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: DIN Rail; DIN-rail
- Data Acquisition: Input Module; Output Module; Input/Output Module
- DC Voltage: Logic level 0: 3 V max. Logic level 1: 10~30 VDC
from ABB Measurement & Analytics
The AWT420 transmitter can be used with either analog or digital EZLink sensors for a wide range of applications including drinking water, wastewater, industrial water and power. Operation simplicity is a key feature of the AWT420 with its powerful, yet intuitive software, advanced self-diagnostics... [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Analog Voltage Input; Isolated Analog Voltage Output; Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: Panel / Chassis Mount
- Data Acquisition: DAQ Instrument
- Analog Channels: 2
from Advantech
16-ch Isolated Digital Input Modules. 50 Vmax Input Voltage. 2500 Vdc Optical Isolation. 70 Vdc Over Voltage Protection. 16-channel [See More]
- Isolation: Isolated Digital Inputs
- Data Acquisition: Input Module
from Advantech
8-ch Isolated Digital Input Module. Digital input level: Logic level 0: +1 V max. Isolation voltage: 5000 VRMS. Power consumption: 0.27 W (max). Channels: 8 [See More]
- Isolation: Isolated Digital Inputs
- Data Acquisition: Input Module
from Opto 22
Opto 22 ’s G4 AC input modules are used to detect on/off AC voltage levels. Each module provides up to 4000 volts of optical isolation (transient) between field inputs and the logic output of the circuit. All AC input modules are designed with filtering on the input and a hysteresis amplifier,... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Stand-alone
- Data Acquisition: DAQ Instrument; Input Module
- Digital I/O Channels: 2
from Sealevel Systems, Inc.
The SeaI/O-470N adds eight differential or 16 single-ended 12-bit inputs, two 12-bit D/A output channels, eight optically isolated inputs, and eight open-collector outputs to your SeaI/O network. Compatible with all SeaI/O base units (Ethernet, USB, RS-485, RS-232), the SeaI/O-470N connects easily... [See More]
- Isolation: Isolated Digital Inputs
- Resolution: 12
- Data Acquisition: Input/Output Module
- DC Voltage: 5-30 VDC
from CAS DataLoggers
The DigiRail-2A Analog Input Module signal condition and digital transmitters with Modbus RTU communication interface provide a simple way for integrating analog signal to supervisory systems. Featuring two universal input analog signal channels it is the most economical way to deliver analog input... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: DIN Rail
- Data Acquisition: Input Module
- Analog Channels: 2
from Apix, Inc.
DESCRIPTION. The ISODAQ SPi Series Input Modules feature 8 independent channels and an SPi interface. They are fully isolated with. 3000 Vrms between Input, Power, SPi serial link and 2000 Vrms Channel-to-Channel. These ar [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Analog Voltage Input; Isolated Analog Voltage Output; Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: Module
- Data Acquisition: Input Module; Output Module; Input/Output Module
- Analog Channels: 8
from ACCES I/O Products, Inc.
Features. 16, 32, or 48 individually optically isolated AC/DC inputs. Change-of-state detection (IRQ) on selected inputs (certain models). Polarity insensitive AC/DC inputs accept up to 60VDC or AC rms. Optically isolated channel to channel and channel to ground. Universal PCI, PCI-X, 3.3V and 5V... [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Digital Inputs; Channel to Computer, Channel to Ground
- Form Factor: PC Board
- Data Acquisition: Data Acquisition Card; Input Module
- Digital I/O Channels: 16
from Aerotech, Inc.
Sensor I/O easily aligned with encoder position. Data recording and playback. Combine sensor inputs in real time. 5 MHz collection rates. One easy-to-use software interface. Aerotech ’s Sensor Fusion ™ is a 3U data acquisition device integrated with our Automation 3200 (A3200) motion... [See More]
- Isolation: Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: Panel / Chassis Mount; Rack Mount; Stand-alone
- Data Acquisition: DAQ Instrument
- Analog Channels: 16
from OMEGA Engineering, Inc.
The OME-DB-16P is a 16 channel isolated digital input daughter board. The optically isolated inputs of the OME-DB-16P consist of a bi-directional OPTO-coupler with a resistor for current sensing. You can use the OME-DB-16P to sense DC signals from TTL levels up to 24V. You can also use OME-DB-16P to... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: PC Board
- Data Acquisition: Input Module
- Analog Channels: 16
from Moxa Inc.
Simple Applications without Programming. The ioLogik E2210 can convert a trigger event result directly into a digital alarm output. This can be set up using the ioAdmin UI to define an IF-THEN-ELSE Logic rule, eliminating the need to write programs for PCs or controllers. Software Event Counter... [See More]
- Isolation: Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: Stand-alone
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 20
from Acromag, Inc.
Active-Low Inputs, Sinking Outputs with i2o Option. 12 input channels, 0 to 35 DC range. 15 to 36V DC power supply required. EtherNet/IP ® or Ethernet Modbus TCP/IP 10/100Mbps network, i2o input-to-output capability. 981EN-4xxx: Ethernet Modbus TCP/IP, 12 inputs. 981EN-6xxx: EtherNet/IP, 12... [See More]
- Isolation: Isolated Digital Inputs; Isolated Digital Outputs; Network, Power
- Form Factor: DIN Rail
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 12
from Gefran
The R-E16 module has 16 optically isolated digital inputs, 24 VDC, PNP, and acquires logic signals from proximity sensors, drives, etc. It is installed on the backplanes of the R-BUS(x), from which it receives auxiliary power supply (LED). Each input is protected against inversion of polarity and... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Modular Bay or Slot System
- Data Acquisition: Input Module
- Digital I/O Channels: 16
from American Portwell Technology Inc.
N Series for USB. Isolated Digital I/O Unit (16ch DI, 16ch DO) [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: DIN Rail
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 32
from WINSYSTEMS, INC.
WinSystems ’ ISM-TRM-ISO-IN provides 24 lines of optically isolated and digitally debounced inputs to provide easy connections and signal conditioning from field wiring. The board is needed for applications requiring signal isolation between an embedded computer and monitoring points. [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: PC Board
- Data Acquisition: Input Module
- Analog Channels: 24
from NorPix, Inc.
StreamPix is Norpix ’s flag ship software product. Resulting from more than 10 years of interaction with our vast group of customers, StreamPix has become the ultimate Digital Video Recording software. It offers a state of the art user interface, and an enormous amount of usage flexibility for... [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Analog Voltage Input; Isolated Digital Inputs
- Form Factor: Panel / Chassis Mount; Rack Mount; Stand-alone
- Data Acquisition: Data Acquisition Card; DAQ Instrument; Datalogger; Input Module; Input/Output Module
- Analog Channels: 32
from MonoDAQ
Robust, isolated digital inputs are suitable for reading data off digital sensors as well as for demanding test automation tasks. Three power supply voltages (5V, 12V and device voltage supply level) available on the front connector. EtherCAT interface, signal and power over the same cable. Digital... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Panel / Chassis Mount; DIN Rail (optional feature)
- Data Acquisition: Input Module; Input/Output Module
- Analog Channels: 4
from Measurement Computing
KEY HIGHLIGHTS. Serial interface data acquisition (DAQ) devices with up to eight temperature/ voltage inputs, up to four voltage/current outputs, two 32-bit counters, up to 16 digital input, open collector outputs, and up to 7 relays. [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Stand-alone
- Data Acquisition: Input Module
- Digital I/O Channels: 14
from Next Industries S.r.L
The OMNIAlog MI480 is a smart datalogger that provides an extensive array of features that allow it to be used across a wide variety of applications. The MI480 is a robust, stand alone, low power data logger featuring USB memory stick support, 24 bit resolution, extensive communications capabilities... [See More]
- Isolation: Isolated Digital Inputs
- Analog Channels: 8
- Data Acquisition: Datalogger
- Differential Channels: Differential Channels
from Aries Engineering Co., Inc.
HyperView-Press ® Monitoring System provides the easiest to use, most comprehensive and highest reliability press monitoring available. With the most consistent test results and less false failures, the HyperView-Press ® will help you achieve your yield and quality objectives. Easy... [See More]
- Isolation: Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: Stand-alone
- Data Acquisition: DAQ Instrument
- Analog Channels: 4
from ANZER
DIN Mounting bd, 4 std,isolated DI/DO [See More]
- Isolation: Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: PC Board; DIN Rail
- Data Acquisition: Input/Output Module
from Red Pitaya, d.o.o.
STEMlab 125-14 is our most versatile and popular product, which was introduced to the market in 2013 when Red Pitaya was established. Since then it has been used in a wide variety of contexts, from hobbyists and ham radio operators to industry, research, and space applications. [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Analog Voltage Input (optional feature); Isolated Analog Voltage Output (optional feature); Isolated Digital Inputs; Isolated Digital Outputs (optional feature)
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Data Acquisition: Data Acquisition Card; DAQ Instrument; Datalogger; Chart Recorder; Input Module; Output Module (optional feature); Input/Output Module
- Analog Channels: 6
from Electro Standards Laboratories
The CellMite ® ProD Model 4328 is a high performance data acquisition and strain gage interface module from Electro Standards Laboratories that is suitable for embedded applications that require high speed and high accuracy analog and digital data acquisition. The CellMite ® ProD features... [See More]
- Isolation: Isolated Analog Voltage Output; Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: PC Board
- Data Acquisition: Input/Output Module
- Analog Channels: 4
from Opto 22
Opto 22 ’s G4 AC input modules are used to detect on/off AC voltage levels. Each module provides up to 4000 volts of optical isolation (transient) between field inputs and the logic output of the circuit. All AC input modules are designed with filtering on the input and a hysteresis amplifier,... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Stand-alone
- Data Acquisition: DAQ Instrument; Input Module
- Digital I/O Channels: 2
from Sealevel Systems, Inc.
The SeaI/O-470N-OEM adds eight differential or 16 single-ended 12-bit inputs, two 12-bit D/A output channels, eight optically isolated inputs, and eight open-collector outputs to your SeaI/O network. Compatible with all SeaI/O base units (Ethernet, USB, RS-485, RS-232), the SeaI/O-470N-OEM connects... [See More]
- Isolation: Isolated Digital Inputs
- Resolution: 12
- Data Acquisition: Input/Output Module
- DC Voltage: 5-30 VDC
from Apix, Inc.
DESCRIPTION. The ISODIN Series DIN Modules feature 8 independent Analog channels and conform to the Industry Standard Modbus RTU Communications Protocol. Based on their high channel density, a single 32 module segment includes 256 c [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Analog Voltage Input; Isolated Analog Voltage Output; Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: DIN Rail
- Data Acquisition: Input Module; Output Module; Input/Output Module
- Analog Channels: 8
from ACCES I/O Products, Inc.
Features. 16, 32, or 48 individually optically isolated solid-state outputs. Solid-state design permits high-speed switching and long-life expectancy. Load voltages up to 60 Volts, current up to 2A. Lower cost per point than externally-racked solid-state relay modules. Optically isolated channel to... [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Digital Inputs; Channel to Computer, Channel to Ground
- Form Factor: PC Board
- Data Acquisition: Data Acquisition Card; Input Module
- Digital I/O Channels: 16
from OMEGA Engineering, Inc.
The OME-DB-24P is a 24 channel isolated digital input daughter board for OME-PIO-D144 digital input board. The optically isolated inputs of the OME-DB-24P consist of a bi-directional opto-couples with a resistor for current sensing. You can use the OME-DB-24P to sense DC signals from TTL levels up... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: PC Board
- Data Acquisition: Input Module
- Analog Channels: 24
from Moxa Inc.
Flexible Digital Input/Output Configuration. The ioLogik E2212 provides system integrators with the flexibility to handle various field demands with channels that can be configured by software for input or output operation. You can configure the I/O channels to suit your needs, for combinations such... [See More]
- Isolation: Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: Stand-alone
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 20
from Acromag, Inc.
XTA-MRNO-6: Mechanical relay output modules. XTA-120V-6: Logic level input modules. The XTA-MRNO-6 is an interposing relay module with six digital inputs and six mechanical relay outputs. It is intended for use with BusWorks XT Series discrete I/O or other digital output modules for the purpose of... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: DIN Rail
- Data Acquisition: Input Module
- Digital I/O Channels: 6
from Gefran
The R-EU16 is a mixed module with 8 digital inputs and 8 digital outputs, used for completing system configuration with a single board and/or for saving space on the backplane. The 24V PNP inputs have a software-programmable filter. The module is organized in 8 inputs + common GND. Input presence is... [See More]
- Isolation: Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: Modular Bay or Slot System
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 16
from American Portwell Technology Inc.
Isolated Digital Input Board for PCI [See More]
- Isolation: Isolated Digital Inputs; Optocoupler Isolation
- Form Factor: PC Board
- Data Acquisition: Input Module; Input/Output Module
- Digital I/O Channels: 128
from Measurement Computing
PCI-based 16 electromechanical relays, 16 isolated (500 V) digital input board. KEY HIGHLIGHTS. The PCI-PDISO8 Series relay interface boards are designed for high voltage applications. Each device provides isolated Form C and Form A electromechanical relay output and high current output. [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: PC Board
- Data Acquisition: Data Acquisition Card; Input Module
- Digital I/O Channels: 16
from Next Industries S.r.L
The OMNIAlog MI816 is a smart datalogger that provides an extensive array of features that allow it to be used across a wide variety of applications. The MI816C is a robust, stand alone, low power data logger featuring USB memory stick support, 24 bit resolution, extensive communications... [See More]
- Isolation: Isolated Digital Inputs
- Analog Channels: 16
- Data Acquisition: Datalogger
- Differential Channels: Differential Channels
from Red Pitaya, d.o.o.
STEMlab 125-14 is our most versatile and popular product, which was introduced to the market in 2013 when Red Pitaya was established. Since then it has been used in wide variety of contexts, from hobbyists and ham radio operators to industry, research and space applications. [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Analog Voltage Input (optional feature); Isolated Analog Voltage Output (optional feature); Isolated Digital Inputs; Isolated Digital Outputs (optional feature)
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Data Acquisition: Data Acquisition Card; DAQ Instrument; Datalogger; Chart Recorder; Input Module; Output Module (optional feature); Input/Output Module
- Analog Channels: 6
from Electro Standards Laboratories
The CellMite ® ProD Model 4349 is a high performance data acquisition and sensor monitoring module from Electro Standards Laboratories that is suitable for embedded applications that require a ruggedized high speed analog and digital data acquisition unit that is accessible via an Ethernet... [See More]
- Isolation: Isolated Analog Voltage Input; Isolated Digital Inputs
- Form Factor: PC Board
- Data Acquisition: Input Module
- Analog Channels: 11
from Opto 22
The IAC15 input module is used to sense ON/OFF AC voltage levels at 90-140 VAC. All AC input modules are designed with filtering on the input and a hysteresis amplifier for high noise rejection and transient-free clean switching. Each module provides up to 4000 volts (transient) of optical isolation... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Stand-alone
- Data Acquisition: DAQ Instrument; Input Module
- Digital I/O Channels: 2
from Sealevel Systems, Inc.
The SeaI/O-530N adds 16 optically isolated inputs and 16 open-collector outputs to your SeaI/O network. Compatible with all SeaI/O base units (Ethernet, USB, RS-485, RS-232), the SeaI/O-530N connects easily using an RS-485 input. Cabling is accomplished via the units RJ45 connector or removable... [See More]
- Isolation: Isolated Digital Inputs
- DC Voltage: 5-30 VDC
- Data Acquisition: Input/Output Module
- Outputs: Analog Voltage Output; Analog Current Output
from ACCES I/O Products, Inc.
Features. 8 Optically-Isolated, Non-Polarized Digital Inputs with Change-of-State Detection. 8 Form C SPDT Electromechanical Relays Can Switch Up to 1 Amp Each. Relays Can be Configured for Level or Pulse Modes. Microcontroller with SRAM and EEPROM. Built-in Watchdog Timer. NEMA4 Enclosure for Harsh... [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Digital Inputs; Channel to Computer
- Form Factor: Stand-alone
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 8
from OMEGA Engineering, Inc.
The PCI-PDISO16 and PCI-PDISO8 combine isolated AC or DC inputs and electromechanical relays on a single PCI-bus compatible board, for IBM or compatible PC ’s. The PCI-PDISO16 provides sixteen 24 V AC or DC inputs and sixteen form C, 3-Amp relays. The PCI-PDISO8 offers eight 24 V AC or DC and... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: PC Board
- Data Acquisition: Data Acquisition Card
- Analog Channels: 8
from Moxa Inc.
Remote Ethernet Relay Control. The ioLogik E2214 is a stand-alone Active Ethernet I/O product with 6 digital inputs and 6 relay outputs. The DIN-Rail mountable E2214 can be connected to digital switches, alarm lights, buzzers, and warning sirens over Ethernet and IP-based networks. The ioLogik E2214... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Stand-alone
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 6
from Acromag, Inc.
AcroPackTM Series of I/O mezzanine modules and carriers provide a cost-effective solution for a modular approach to system assembly enabling application specific customization. They maintain the same functionality and memory map of existing Industry Pack Modules providing our existing customers a... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: PC Board
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 32
from Gefran
The R-EU32 is a mixed module with 16 digital inputs and 16 digital outputs, used for completing system configuration with a single board and/or for saving space on the backplane. Optically-isolated 24 VDC PNP inputs acquire logic signals from proximity sensors, drives, etc. Each input is protected... [See More]
- Isolation: Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: Modular Bay or Slot System
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 32
from American Portwell Technology Inc.
Isolated Digital I/O Board for PCI [See More]
- Isolation: Isolated Digital Inputs; Opto-Isolation
- Form Factor: PC Board
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 32
from Measurement Computing
KEY HIGHLIGHTS. The WebDAQ DT5828 is a stand-alone, temperature logger designed for remote monitoring and control of thermocouple data. **This device does not ship with a PS-9V1AEPS230V power supply**. Log 16 thermocouple channels. Built-in web server allows access from any device with a web... [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Digital Inputs
- Form Factor: Stand-alone
- Data Acquisition: Datalogger
- Digital I/O Channels: 4
from Red Pitaya, d.o.o.
STEMlab 125-14 is our most versatile and popular product, which was introduced to the market in 2013 when Red Pitaya was established. Since then it has been used in wide variety of contexts, from hobbyists and ham radio operators to industry, research and space applications. [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Analog Voltage Input (optional feature); Isolated Analog Voltage Output (optional feature); Isolated Digital Inputs; Isolated Digital Outputs (optional feature)
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Data Acquisition: Data Acquisition Card; DAQ Instrument; Datalogger; Chart Recorder; Input Module; Output Module (optional feature); Input/Output Module
- Analog Channels: 6
from Opto 22
The IAC15A input module is used to sense ON/OFF AC voltage levels at 180-280 VAC. All AC input modules are designed with filtering on the input and a hysteresis amplifier for high noise rejection and transient-free clean switching. Each module provides up to 4000 volts (transient) of optical... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Stand-alone
- Data Acquisition: DAQ Instrument; Input Module
- Digital I/O Channels: 2
from Sealevel Systems, Inc.
The SeaI/O-530N-OEM adds 16 optically isolated inputs and 16 open-collector outputs to your SeaI/O network. Compatible with all SeaI/O base units (Ethernet, USB, RS-485, RS-232), the SeaI/O-530N-OEM connects easily using an RS-485 input. Cabling is accomplished via the units RJ45 connector or... [See More]
- Isolation: Isolated Digital Inputs
- DC Voltage: 5-30 VDC
- Data Acquisition: Input/Output Module
- Outputs: Analog Voltage Output; Analog Current Output
from ACCES I/O Products, Inc.
Features. 16 or 8 optically-isolated, non-polarized CMOS compatible digital inputs accept ±31VDC or AC rms. IRQ on input change of state (COS) eliminates the need for constant polling. Slow/fast filter to accommodate AC voltages and noisy DC inputs. 16 or 8 optically-isolated fully protected... [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Digital Inputs; Channel to Ground
- Form Factor: PC Board
- Data Acquisition: Data Acquisition Card; Output Module
- Digital I/O Channels: 32
from OMEGA Engineering, Inc.
The new iD Series signal conditioners combine the accuracy of laboratory instrumentation with the performance required by demanding industrial applications. The iD Series signal conditioners are ideal for those applications in Data Acquisition, Test & Measurement, Process Control, and Industrial... [See More]
- Isolation: Isolated Analog Voltage Input; Isolated Analog Voltage Output; Isolated Digital Inputs; Isolated Digital Outputs
- Resolution: 19
- Data Acquisition: Output Module
- Accuracy: 0.1000
from Moxa Inc.
Moxa's ioLogik E2242 is tailormade for use with remote monitoring and alarm systems. This Active Ethernet I/O product provides 4 analog inputs and 12 configurable DIOs for a 1:3 ratio of analog IOs to digital IOs perfectly adapted to water tank monitoring and environmental monitoring applications,... [See More]
- Isolation: Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: Stand-alone
- Data Acquisition: Input/Output Module
- Analog Channels: 4
from Acromag, Inc.
32 port-isolated input channels. ±60V AC/DC input (three ranges). Interrupt support for each channel. IP440A Industrial I/O Pack (IP) modules provide 32 optically isolated inputs to safely monitor a wide range of digital input voltage levels. Isolation protects your computer system from... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: PC Board
- Data Acquisition: Input Module
- Digital I/O Channels: 32
from Gefran
The R-C3 module has 3 independent 32 bit counters, each with 3 optically isolated digital inputs. For each counter you can: - program operating mode: up/down counting, mono and bidirectional encoder, or measurement of period or frequency. - select the digital filter (from 100Hz up to 400KHz). Each... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Modular Bay or Slot System
- Data Acquisition: Input Module
- Digital I/O Channels: 3
from American Portwell Technology Inc.
Half-size Low-Profile PCI bus compatible card that provides isolated digital input and output interface for PCI-Bus computers. The card has eight optically-isolated digital inputs for AC or DC control signals and eight electromechanical relay outputs. [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Digital Inputs; Ground-to-Channel
- Form Factor: PC Board
- Data Acquisition: Input/Output Module
- Resolution: 8
from Measurement Computing
KEY HIGHLIGHTS. The WebDAQ DT5837 is a stand-alone, vibration and acoustic data logger designed for remote monitoring, analysis, and control. **This device does not ship with a PS-9V1AEPS230V power supply**. Log four simultaneous IEPE inputs. Built-in web server allows access from any device with a... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Stand-alone
- Data Acquisition: Datalogger
- Analog Channels: 4
from Opto 22
The IAC24 input module is used to sense ON/OFF AC voltage levels at 90-140 VAC. All AC input modules are designed with filtering on the input and a hysteresis amplifier for high noise rejection and transient-free clean switching. Each module provides up to 4000 volts (transient) of optical isolation... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Stand-alone
- Data Acquisition: DAQ Instrument; Input Module
- Digital I/O Channels: 2
from Sealevel Systems, Inc.
The SeaI/O-410N-OEM adds 16 optically isolated inputs and 16 Reed relay outputs to your SeaI/O network. Compatible with all SeaI/O base units (Ethernet, USB, RS-485, RS-232), the SeaI/O-410N-OEM connects easily using an RS-485 input. Cabling is accomplished via the units RJ45 connector or removable... [See More]
- Isolation: Isolated Digital Inputs
- DC Voltage: 5-30 VDC
- Data Acquisition: Input/Output Module
- Host Connection: Expansion
from ACCES I/O Products, Inc.
Features. High-speed USB 2.0 device, USB 3.0 and 1.1 compatible. 16 individually optically isolated inputs (channel to channel and channel to ground). Polarity insensitive AC/DC inputs accept up to 31 VDC or AC RMS. Jumper selectable filtering per input channel for AC or voltage transients. 16... [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Digital Inputs; Channel to Ground
- Form Factor: PC Board (optional feature); DIN Rail (optional feature); Stand-alone
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 4
from OMEGA Engineering, Inc.
The OM-LGR-5320 Series are highspeed, standalone data loggers for analog and digital signals. Each module offers 16 analog inputs, 16 digital inputs, one single Form C relay (0.5A) digital output for triggering/alarming, and four counter/encoder inputs. These devices allow users to collect... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Portable
- Data Acquisition: Datalogger
- Analog Channels: 16
from Moxa Inc.
ioMirror E3000 Ethernet I/O products are designed as a cable-replacement solution that connects remote digital input signals to output signals over an IP network. The ioMirror E3210 provides 8 digital input channels, 8 digital output channels, and a 10/100M Ethernet interface. Up to 8 pairs of... [See More]
- Isolation: Isolated Digital Inputs; Isolated Digital Outputs; Isolated Alarm Output
- Form Factor: Stand-alone
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 16
from Acromag, Inc.
i2o Option. 20 to 36V DC Input. 2A @ 250V AC or 110V DC SPST Output. 2A @ 240V AC or 125V DC Alarm. 18 to 36V DC Power (redundancy-ready). Modbus TCP/UDP/IP or i2o peer-to-peer 10/100 Base-T(X) and 100 Base-FX. EtherStax I/O blocks provide a ruggedized, high-density solution to interface a large... [See More]
- Isolation: Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: Stand-alone
- Data Acquisition: Input/Output Module
- Analog Channels: 48
from Gefran
The R-MIX module is equipped with a microprocessor with digital inputs/outputs and analog inputs/outputs, useful for configuring a system with a single board and/or when you want to save space on the back-plane. It has optically-isolated 24 VDC PNP digital inputs and outputs. Each input is protected... [See More]
- Isolation: Isolated Analog Voltage Input; Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: Modular Bay or Slot System
- Data Acquisition: Input/Output Module
- Analog Channels: 4
from American Portwell Technology Inc.
Remote rugged 54-bit digital inputs from USB in a NEMA 4 enclosure for harsh environments. Digital voltage inputs up to 50V per channel can be monitored. [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Digital Inputs; Isolated Digital Outputs; Opto-Isolation
- Form Factor: Stand-alone
- Data Acquisition: Input/Output Module
- Analog Channels: 54
from Measurement Computing
Digital I/O board with eight isolated inputs and eight SPDT relays. KEY HIGHLIGHTS. ISA data acquisition (DAQ) boards are available in a variety of configurations to meet the needs of most applications. Features include analog I/O, digital I/O, and counter/timer functions. Available with... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: PC Board
- Data Acquisition: Data Acquisition Card; Input Module
- Digital I/O Channels: 8
from Opto 22
The IAC24A input module is used to sense ON/OFF AC voltage levels at 180-280 VAC. All AC input modules are designed with filtering on the input and a hysteresis amplifier for high noise rejection and transient-free clean switching. Each module provides up to 4000 volts (transient) of optical... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Stand-alone
- Data Acquisition: DAQ Instrument; Input Module
- Digital I/O Channels: 2
from Sealevel Systems, Inc.
The SeaI/O-410N adds 16 optically isolated inputs and 16 Reed relay outputs to your SeaI/O network. Compatible with all SeaI/O base units (Ethernet, USB, RS-485, RS-232), the SeaI/O-410N connects easily using an RS-485 input. Cabling is accomplished via the units RJ45 connector or removable screw... [See More]
- Isolation: Isolated Digital Inputs
- DC Voltage: 5-30 VDC
- Data Acquisition: Input/Output Module
- Host Connection: Expansion
from ACCES I/O Products, Inc.
Features. 48 individually optically isolated AC/DC inputs. Polarity-insensitive AC/DC inputs accept up to 60 VDC or AC rms. AC or voltage transient filtering. Optically isolated channel-to-channel and channel-to-ground. Factory Options: (call for pricing and availability). 0 to 70 °C and -40 to... [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Digital Inputs; Channel to Ground, Channel to Computer
- Form Factor: PC Board
- Data Acquisition: Data Acquisition Card; Input Module
- Digital I/O Channels: 48
from Moxa Inc.
Integrated, compact box solution for GPRS telemetry applications. Definable GPRS connection strategy to optimize data transmission. Intuitive menu driven front-end intelligence. Flexible, Unicode alarm system supporting SMS, email, SNMP Trap, TCP, UDP. One RS-232/422/485 serial port built in to... [See More]
- Isolation: Isolated Digital Inputs; Isolated Digital Outputs; Isolated Relay Output
- Form Factor: Stand-alone
- Data Acquisition: Input/Output Module
- Analog Channels: 4
from Gefran
The R-MIXR module is equipped with a microprocessor with digital inputs/outputs and analog inputs/outputs, useful for configuring a system with a single board and/or when you want to save space on the back-plane. It has optically-isolated 24 VDC PNP digital inputs and outputs. Each input is... [See More]
- Isolation: Isolated Analog Voltage Input; Isolated Analog Voltage Output; Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: Modular Bay or Slot System
- Data Acquisition: Input/Output Module
- Analog Channels: 4
from Measurement Computing
Low Cost USB Digital I/O Module; 28 DIO, high drive capability. KEY HIGHLIGHTS. The DT9817 Series of USB digital I/O devices provide support for solid-state or mechanical relays. These devices are available with isolation, high current output and AC/DC signal sensing. [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Stand-alone
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 28
from Opto 22
The IAC5 input module is used to sense ON/OFF AC voltage levels between 90-140 VAC. All AC input modules are designed with filtering on the input and a hysteresis amplifier for high noise rejection and transient-free clean switching. Each module provides up to 4000 volts (transient) of optical... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Stand-alone
- Data Acquisition: DAQ Instrument; Input Module
- Digital I/O Channels: 2
from Sealevel Systems, Inc.
The SeaI/O-420N adds 16 optically isolated inputs and 8 Form C relay outputs to your SeaI/O network. Compatible with all SeaI/O base units (Ethernet, USB, RS-485, RS-232), the SeaI/O-420N connects easily using an RS-485 input. Cabling is accomplished via the units RJ45 connector or removable screw... [See More]
- Isolation: Isolated Digital Inputs
- DC Voltage: 5-30 VDC
- Data Acquisition: Input/Output Module
- Host Connection: Expansion
from ACCES I/O Products, Inc.
Features. High-speed USB 2.0 device, USB 3.0 and 1.1 compatible. 8 individually optically isolated digital inputs. Polarity insensitive AC/DC inputs accept up to 31VDC or AC RMS. Jumper selectable filtering per input channel for AC or voltage transients. Four optically isolated fully protected solid... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: PC Board
- Data Acquisition: Data Acquisition Card; Input/Output Module
- Analog Channels: 2
from Moxa Inc.
Integrated, compact box solution for GPRS telemetry applications. Definable GPRS connective strategy to optimize data transmission. Intuitive menu driven front-end intelligence. Flexible, Unicode alarm system supporting SMS, email, SNMP Trap, TCP/UDP. One RS-232/422/485 serial port built-in to... [See More]
- Isolation: Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: Stand-alone
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 20
from Gefran
The R-TC8 module has a processor with 8 optically isolated temperature inputs configurable via software, plus 16 digital outputs for temperature control. The 8 inputs are for thermocouple type J, K. Acquisition time is less than 120 ms for the 8 channels. Scales are in tenths of a degree. The module... [See More]
- Isolation: Isolated Analog Voltage Input; Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: Modular Bay or Slot System
- Data Acquisition: Input/Output Module
- Analog Channels: 8
from Measurement Computing
Ethernet dynamic signal analyzer with four simultaneous 24-bit analog inputs, four IEPE sensor inputs with a 4 mA current source, up to 52.7 kS/s/ch sample rate, one tachometer input, one 24-bit analog output, and support for synchronous expansion. KEY HIGHLIGHTS. The DT8837 Ethernet dynamic signal... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Stand-alone
- Data Acquisition: Input/Output Module
- Analog Channels: 4
from Opto 22
The IAC5 input module is used to sense ON/OFF AC voltage levels at 180-280 VAC. All AC input modules are designed with filtering on the input and a hysteresis amplifier for high noise rejection and transient-free clean switching. Each module provides up to 4000 volts (transient) of optical isolation... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Stand-alone
- Data Acquisition: DAQ Instrument; Input Module
- Digital I/O Channels: 2
from Sealevel Systems, Inc.
The SeaI/O-420N-OEM adds 16 optically isolated inputs and 8 Form C relay outputs to your SeaI/O network. Compatible with all SeaI/O base units (Ethernet, USB, RS-485, RS-232), the SeaI/O-420N-OEM connects easily using an RS-485 input. Cabling is accomplished via the units RJ45 connector or removable... [See More]
- Isolation: Isolated Digital Inputs
- DC Voltage: 5-30 VDC
- Data Acquisition: Input/Output Module
- Host Connection: Expansion
from ACCES I/O Products, Inc.
Features. Small, portable, digital input module provides up to 16-channels. High-speed USB 2.0 device, USB 3.0 and 1.1 compatible. 16, 8, or 4 optically isolated inputs. Jumper selectable filters for AC and noisy DC inputs. On-board 45 degree angled screw terminals. USB/104 form-factor for OEM... [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Digital Inputs; Channel to Ground, From Computer
- Form Factor: PC Board; DIN Rail (optional feature)
- Data Acquisition: Input Module
- Digital I/O Channels: 8
from Moxa Inc.
Inputs per Module. 4 channels. On-State Voltage. 120 VAC nominal, min. 85 VAC to max. 132 VAC. Min. Off-State Voltage. Max. 45 VAC. On-State Current. Max. 8 mA/point @ 132 VAC. Input Impedence. Typ. 11K ohms. Common Type. 4 channels for 2 COMs (single common) [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Modular Bay or Slot System
- Data Acquisition: Input Module
- Digital I/O Channels: 4
from Measurement Computing
KEY HIGHLIGHTS. The DT8874 MEASURpoint Ethernet data acquisition (DAQ) device provides simultaneous analog input and any combination of isolated temperature, resistance and voltage measurements. This device features one A/D per channel and auto calibration in a rugged half rack enclosure for... [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Digital Inputs
- Form Factor: Stand-alone
- Data Acquisition: DAQ Instrument
- Analog Channels: 48
from Opto 22
4-channel Ac Input 180-280 VAC, 5 VDC Logic [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Stand-alone
- Data Acquisition: DAQ Instrument; Input Module
- Digital I/O Channels: 4
from Sealevel Systems, Inc.
The SeaI/O-430N-OEM adds 32 optically isolated inputs to your SeaI/O network. Compatible with all SeaI/O base units (Ethernet, USB, RS-485, RS-232), the SeaI/O-430N-OEM connects easily using an RS-485 input. Cabling is accomplished via the units RJ45 connector or removable screw terminals. RS-485... [See More]
- Isolation: Isolated Digital Inputs
- DC Voltage: 5-30 VDC
- Data Acquisition: Input/Output Module
- Host Connection: Expansion
from ACCES I/O Products, Inc.
The USB-AO-ARB1 is an ideal solution for adding portable, easy-to-install high-speed analog output capabilities to any computer with a USB 2.0 port. The USB-AO-ARB1 is a USB 2.0 High-Speed device and is plug-and-play allowing quick connect or disconnect whenever you need additional I/O on your USB... [See More]
- Isolation: Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: PC Board
- Data Acquisition: Output Module
- Analog Channels: 2
from Moxa Inc.
Inputs per Module. 4 channels. On-State Voltage. 240 VAC nominal, min. 170 VAC to max. 264 VAC. Min. Off-State Voltage. Max. 45 VAC. On-State Current. Max. 12 mA/point @ 264 VAC. Input Impedence. Typ. 22K ohms. Common Type. 4 channels for 2 COMs (single common) [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Modular Bay or Slot System
- Data Acquisition: Input Module
- Digital I/O Channels: 4
from Measurement Computing
KEY HIGHLIGHTS. The DT9874 MEASURpoint USB data acquisition (DAQ) system provides simultaneous analog input along with any combination of isolated temperature, resistance and voltage measurements. This device features one A/D per channel and auto calibration in a rugged half rack enclosure for... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Stand-alone
- Data Acquisition: DAQ Instrument
- Analog Channels: 48
from Opto 22
4-channel AC Input 90-140 VAC, 5 VDC Logic [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Stand-alone
- Data Acquisition: DAQ Instrument; Input Module
- Digital I/O Channels: 4
from Sealevel Systems, Inc.
The SeaI/O-570N, designed using the Linear Technology LTC1867 A/D chip, adds eight single-ended 16-bit analog inputs, eight optically isolated inputs and eight Form C relay outputs to your SeaI/O network. Compatible with all SeaI/O base units (Ethernet, USB, RS-485, RS-232), the SeaI/O-570N easily... [See More]
- Isolation: Isolated Digital Inputs
- Resolution: 16
- Data Acquisition: Input/Output Module
- DC Voltage: 5-30 VDC
from ACCES I/O Products, Inc.
Features. Eight optically isolated, non-polarized digital inputs. Eight electromechanical relay outputs. 60V isolation. Can detect input state change and assert interrupt. IIRO-8 is a low-cost, half-size card that provides isolated input and output interface for PC/XT/AT and compatible computers. [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Digital Inputs; Channel to Computer
- Form Factor: PC Board
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 8
from Moxa Inc.
Inputs per Module. 16 channels, sink type. On-State Voltage. 24 VDC nominal, min. 11 VDC to max. 28.8 VDC. Min. Off-State Voltage. Max. 5 VDC. On-State Current. Max. 6 mA/point @ 28.8 VDC. Input Impedence. Typ. 5.1K ohms. Filtering Time. Typ. 1.5 ms. Common Type. 16 channels for 2 COMs (single... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Modular Bay or Slot System
- Data Acquisition: Input Module
- Digital I/O Channels: 16
from Measurement Computing
Isolated USB data acquisition (DAQ) device with eight analog inputs, 24-bit resolution, up to 960 S/s sample rate, software selectable voltage, current, thermocouple, RTD, resistance, and bridge-based sensor input options, and eight isolated digital I/O. KEY HIGHLIGHTS. The DT9829-8 USB data... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Stand-alone
- Data Acquisition: Input/Output Module
- Analog Channels: 8
from Opto 22
G4 DC Input 4-16 VDC 16-channel Integral rack [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Digital Inputs
- Form Factor: PC Board
- Data Acquisition: DAQ Instrument; Input Module
- Digital I/O Channels: 16
from Sealevel Systems, Inc.
The SeaI/O-570N-OEM, designed using the Linear Technology LTC1867 A/D chip, adds eight single-ended 16-bit analog inputs, eight optically isolated inputs and eight Form C relay outputs to your SeaI/O network. Compatible with all SeaI/O base units (Ethernet, USB, RS-485, RS-232), the SeaI/O-570N-OEM... [See More]
- Isolation: Isolated Digital Inputs
- Resolution: 16
- Data Acquisition: Input/Output Module
- DC Voltage: 5-30 VDC
from ACCES I/O Products, Inc.
Features. Individually-isolated digital inputs for up to three 16-bit groups. Polarity-protected input voltage amplitudes to 28V and 60V. 60Vrms Isolation, Channel-to-Channel and Channel-to-Host PC. On-card shields prevent accidental contact with user voltages. Some models can generate interrupts... [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Digital Inputs; Channel to Computer
- Form Factor: PC Board
- Data Acquisition: Input Module
- Differential Channels: Differential Channels
from Moxa Inc.
Inputs per Module. 16 channels, source type. On-State Voltage. 24 VDC nominal, min. 11 VDC to max. 28.8 VDC. Min. Off-State Voltage. Max. 5 VDC. On-State Current. Max. 6 mA/point @ 28.8 VDC. Input Impedence. Typ. 5.1K ohms. Filtering Time. Typ. 1.5 ms. Common Type. 16 channels for 2 COMs (single... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Modular Bay or Slot System
- Data Acquisition: Input Module
- Digital I/O Channels: 16
from Measurement Computing
USB or Ethernet data acquisition (DAQ) system with 32 thermocouple inputs (expandable to 64), 24-bit resolution, up to 3 S/s/ch sample rate, eight digital inputs, and 32 digital outputs/alarms. KEY HIGHLIGHTS. The TC-32 data acquisition (DAQ) system provides high accuracy thermocouple inputs and... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Rack Mount
- Data Acquisition: Input Module
- Analog Channels: 32
from Opto 22
G4 DC Input 16-28 VDC 16-channel Integral Rack [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Digital Inputs
- Form Factor: PC Board
- Data Acquisition: DAQ Instrument; Input Module
- Digital I/O Channels: 16
from Sealevel Systems, Inc.
The SeaI/O-520N adds 8 optically isolated inputs and 8 high-current Form C relay outputs to your SeaI/O network. Compatible with all SeaI/O base units (Ethernet, USB, RS-485, RS-232), the SeaI/O-520N connects easily using an RS-485 input. Cabling is accomplished via the units RJ45 connector or... [See More]
- Isolation: Isolated Digital Inputs
- DC Voltage: 5-30 VDC
- Data Acquisition: Input/Output Module
- DC Current: 500 mA
from ACCES I/O Products, Inc.
Features. 16 optically-isolated, non-polarized CMOS compatible digital inputs accept ±31VDC or AC rms. IRQ on input change of state (COS) eliminates the need for constant polling. Slow/fast filter to accommodate AC voltages and noisy DC inputs. 16 long-life form C electro-mechanical relays... [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Digital Inputs; Channel to Computer
- Form Factor: PC Board
- Data Acquisition: Data Acquisition Card; Input/Output Module
- Digital I/O Channels: 16
from Moxa Inc.
Inputs per Module. 8 channels, sink type. On-State Voltage. 24 VDC nominal, min. 11 VDC to max. 28.8 VDC. Min. Off-State Voltage. Max. 5 VDC. On-State Current. Max. 6 mA/point @ 28.8 VDC. Input Impedence. Typ. 5.1K ohms. Filtering Time. Typ. 1.5 ms. Common Type. External common (single common) [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Modular Bay or Slot System
- Data Acquisition: Input Module
- Digital I/O Channels: 8
from Measurement Computing
High Performance USB DAQ Module; 16-bit, 500kHz, 16 AI, 32 DIO, 5 C/T, No Enclosure. KEY HIGHLIGHTS. The DT9834 Series of isolated, multifunction USB data acquisition (DAQ) devices provide synchronous analog, digital and counter functions along with fast sample rates. Available with analog outputs... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: PC Board
- Data Acquisition: Data Acquisition Card
- Analog Channels: 16
from Opto 22
DC Input 4-16 VDC 16-channel Integral Rack [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Digital Inputs
- Form Factor: PC Board
- Data Acquisition: DAQ Instrument; Input Module
- Digital I/O Channels: 16
from Sealevel Systems, Inc.
The SeaI/O-520N-OEM adds 8 optically isolated inputs and 8 high-current Form C relay outputs to your SeaI/O network. Compatible with all SeaI/O base units (Ethernet, USB, RS-485, RS-232), the SeaI/O-520N-OEM connects easily using an RS-485 input. Cabling is accomplished via the units RJ45 connector... [See More]
- Isolation: Isolated Digital Inputs
- DC Voltage: 5-30 VDC
- Data Acquisition: Input/Output Module
- DC Current: 500 mA
from ACCES I/O Products, Inc.
Features. 16 individually optically isolated inputs (channel to channel and channel to ground). Polarity insensitive AC/DC inputs accept up to 31 VDC or AC RMS. Jumper selectable filtering per input channel for AC or voltage transients. 16 optically isolated fully protected low-side FETs capable of... [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Digital Inputs; Isolated Digital Outputs; Channel to Ground, From Computer
- Form Factor: PC Board (optional feature); DIN Rail (optional feature); Stand-alone
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 8
from Moxa Inc.
Inputs per Module. 8 channels, source type. On-State Voltage. 24 VDC nominal, min. 11 VDC to max. 28.8 VDC. Min. Off-State Voltage. Max. 5 VDC. On-State Current. Max. 6 mA/point @ 28.8 VDC. Input Impedence. Typ. 5.1K ohms. Filtering Time. Typ 1.5 ms. Common Type. External common (single common) [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Modular Bay or Slot System
- Data Acquisition: Input Module
- Digital I/O Channels: 8
from Measurement Computing
USB Data Acquisition Module; 20-bit, 1 MHz, 32 AI, 32 DIO, 5 C/T, No Enclosure. KEY HIGHLIGHTS. The DT9844 USB data acquisition (DAQ) device provides synchronous analog, digital, and counter functions along with high sample rates and low crosstalk between channels, allowing for highly accurate... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: PC Board
- Data Acquisition: Data Acquisition Card
- Analog Channels: 32
from Opto 22
DC Input 16-28 VDC 16-channel Integral Rack [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Digital Inputs
- Form Factor: PC Board
- Data Acquisition: DAQ Instrument; Input Module
- Digital I/O Channels: 16
from Sealevel Systems, Inc.
Designed using the Maxim MAX197 successive approximation-type A/D chip, the SeaI/O-470E provides eight differential or 16 single-ended 12-bit inputs and two 12-bit D/A output channels. The A/D inputs are software selectable for 0-5V, 0-10V, +/-5V, and +/-10V ranges and each channel can be configured... [See More]
- Isolation: Isolated Digital Inputs
- Resolution: 12
- Data Acquisition: Input/Output Module
- DC Voltage: 5-30 VDC
from ACCES I/O Products, Inc.
Features. Universal PCI, PCI-X, 3.3V and 5V compatible (Call for PCI-Express availability). Sixteen optically-isolated, non-polarized digital inputs. Opto-isolated channel to channel and channel to ground. Sixteen fully protected FET outputs. Can detect input state change and assert interrupt. No... [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Digital Inputs; Isolated Digital Outputs; Channel to Ground, Channel to Computer
- Form Factor: PC Board
- Data Acquisition: Data Acquisition Card; Input/Output Module
- Digital I/O Channels: 16
from Moxa Inc.
Built-in 2-port Ethernet switch for daisy-chain topologies. Free support of Moxa ’s push-based Active OPC Server Lite. - Seamlessly connect to any SCADA system. - Save 80% on network bandwidth. - I/O response that ’s seven times faster. User-defined Modbus/TCP addressing. MXIO... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: DIN Rail
- Data Acquisition: Input Module
- Digital I/O Channels: 16
from Measurement Computing
USB-based eight Form C Relay and eight isolated high-voltage input interface device with 40-pin connector. KEY HIGHLIGHTS. The USB-PDISO8 Series relay interface devices are designed for high voltage applications. Each device provides isolated Form C electromechanical SPDT relays and a heavy-duty... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Stand-alone
- Data Acquisition: Input Module
- Digital I/O Channels: 8
from Opto 22
The SNAP-IAC5FM provides four channels of 90-140 VAC digital input. Each channel senses the on/off status for AC voltages from sources such as proximity switches, push buttons, or auxiliary contacts. It has removable top-mounted connectors for easy access to field wiring, as well as channel-specific... [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Digital Inputs
- Form Factor: Modular Bay or Slot System
- Data Acquisition: Input Module
- Digital I/O Channels: 4
from Sealevel Systems, Inc.
Designed using the Maxim MAX197 successive approximation-type A/D chip, the SeaI/O-470E-OEM provides eight differential or 16 single-ended 12-bit inputs and two 12-bit D/A output channels. The A/D inputs are software selectable for 0-5V, 0-10V, +/-5V, and +/-10V ranges and each channel can be... [See More]
- Isolation: Isolated Digital Inputs
- Resolution: 12
- Data Acquisition: Input/Output Module
- DC Voltage: 5-30 VDC
from ACCES I/O Products, Inc.
Features. Universal PCI, PCI-X, 3.3V and 5V compatible (Call for PCI-Express availability). Eight or sixteen optically isolated, non-polarized digital inputs. Eight or sixteen electro-mechanical relay outputs. Opto-isolated channel to channel and channel to ground. Can detect input state change and... [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Digital Inputs; Isolated Digital Outputs; Channel to Ground, Channel to Computer
- Form Factor: PC Board
- Data Acquisition: Data Acquisition Card; Input/Output Module
- Digital I/O Channels: 8
from Moxa Inc.
Built-in 2-port Ethernet switch for daisy-chain topologies. Free support of Moxa ’s push-based Active OPC Server Lite. - Seamlessly connect to any SCADA system. - Save 80% on network bandwidth. - I/O response that ’s seven times faster. User-defined Modbus/TCP addressing. MXIO... [See More]
- Isolation: Isolated Digital Inputs; Isolated Digital Outputs
- Form Factor: DIN Rail
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 16
from Measurement Computing
KEY HIGHLIGHTS. "The DT9800-EC-I Series of isolated, multifunction USB data acquisition (DAQ) provide analog input, counter, and digital I/O data. These devices are available with analog outputs and BNC connectors, and feature easy connections to industry-standard signal conditioning to provide a... [See More]
- Isolation: Isolated Digital Inputs
- Form Factor: Stand-alone
- Data Acquisition: Input/Output Module
- Analog Channels: 16