RS232/422/485 Data Acquisition
Reviewed by: Jon Lowy, consulting engineer
Description
RS232, RS422, and RS485 are serial communication protocols used in data acquisition systems. These protocols facilitate the transmission of data between devices by sending data one bit at a time over a communication channel. RS232 is typically used for short-range, point-to-point communication, while RS422 and RS485 are designed for longer distances and can support multiple devices on a single communication line.
Working Principle
RS232 operates by transmitting data in a serial format, where each bit is sent sequentially over a single channel. It is primarily used for connecting computers to modems and terminals, with a typical data rate of up to 20,000 bits per second and a maximum cable length of 50 feet. RS422 improves upon RS232 by using differential signaling, which increases noise immunity and allows for higher data rates and longer distances, up to 4,000 feet. RS485 extends RS422 by enabling multiple devices to communicate on the same line, supporting up to 32 devices in a network configuration. This is achieved by allowing the line drivers to disconnect when not in use, preventing data collisions.
Applications
RS232 is commonly used in telecommunications systems and computer COM ports for short-range communication. RS422 is suitable for high-speed data transmission over longer distances, such as in industrial automation systems. RS485 is often used in applications where a single controller interfaces with multiple devices, such as in building automation systems where multiple sensors and controllers need to communicate over a single network.
Advantages over other Data Acquisition
RS422 and RS485 offer significant advantages over RS232 in terms of distance and speed. RS422 can transmit data at speeds up to 115,000 baud over distances of 4,000 feet, while RS485 allows for the connection of multiple devices on a single line, creating a small network. This makes RS485 particularly useful in applications requiring communication with multiple devices over long distances, such as in industrial and building automation.
Limitations
RS232 is limited by its short communication distance and lower data rate, making it less suitable for applications requiring long-distance communication or high-speed data transfer. RS422 and RS485, while offering improved performance, require more complex setup and configuration, particularly when multiple devices are involved. Additionally, RS485 networks require careful management to prevent data collisions, as only one device can transmit at a time.
Considerations
When selecting a data acquisition system using RS232, RS422, or RS485, consider the initial costs and operating expenses associated with each protocol. RS232 systems may have lower initial costs due to their simplicity, but RS422 and RS485 offer better performance for more complex applications. Durability and accuracy are generally high for all three protocols, but maintenance and replacement costs can vary depending on the complexity of the network and the number of devices involved. Ensure that the chosen protocol meets the specific requirements of the application, including distance, speed, and the number of devices to be connected.
from RS Components, Ltd.
3 Channel Temperature Datalogger [See More]
- Host Connection: RS232/422/485; USB; RS232, USB
- Analog Channels: 3
- Data Acquisition: Datalogger
- Inputs: Thermocouple Input; Type K
from Dataforth Corporation
Dataforth Corporation's SCM5B isoLynx ® SLX200 data acquisition system is fast, intelligent, modular, and fully isolated. As it implements industry standard Modbus RTU and TCP protocols, the SLX200 enables communication with a wide variety of existing third-party software drivers and HMI/SCADA... [See More]
- Host Connection: RS232/422/485; Ethernet (optional feature)
- Form Factor: Panel / Chassis Mount (optional feature); DIN Rail (optional feature)
- Data Acquisition: DAQ Instrument
- Analog Channels: 60
from Advantech
12DO(Source type) Modbus RS-485 Remote I/O. 12ch source type digital output. Protocols:Modbus RTU,ASCII. Watchdog timer to recover the system. 5000VDC isolation protection [See More]
- Host Connection: RS232/422/485
- DC Voltage: 10~30 VDC
- Data Acquisition: Input/Output Module
- Outputs: Analog Voltage Output
from Holykell Technology Company Limited
This digital recordercan receive signals of current, voltage and resistances, and realize display, recording, over-limit monitoring, report generation, data communication, signal transmission and flow accumulation of temperature, humidity, pressure, liquid level, flow and others. And it can also... [See More]
- Host Connection: RS232/422/485; Ethernet; RS485,RS232C,Ethernet,GPRS,LAN
- Inputs: Thermocouple Input; RTD Input
- Data Acquisition: Chart Recorder
from Sichuan Odot Automation System Co., Ltd.
#9670; The module supports 32 channels of digital input, supports high-level input, and could be connected to PNP sensor, and supports low-level input, and could be connected to NPN sensor. ◆ The module can collect the digital output signal (dry contact or active output) of the field device. [See More]
- Host Connection: RS232/422/485; Ethernet; Modbus TCP, Modbus RTU ,OPCUA, EtherNet/IP
- Isolation: System power supply to field power supply:isolated
- Data Acquisition: Input Module
- Transmission Rate: 100000
from ABB Measurement & Analytics
The C1300 is an advanced, programmable circular chart recorder for up to 4 process signals. Building on ABB ’s successful Commander recorder range, and based on customer feedback, the C1300 features a host of new developments to provide a powerful and flexible data recorder for many industrial... [See More]
- Host Connection: RS232/422/485; TTL
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Chart Recorder
- Analog Channels: 4
from Tempco Electric Heater Corporation
Product Overview. The PPS Series is a major advance in the market for Paperless Videographic Data Recorders incorporating Touch Screen Technology for set-up and programing. The PPS Series encompasses three models: • The PPS-1000 for basic 3 or 6 channel recording on a 4.3" screen. • The... [See More]
- Host Connection: RS232/422/485; Ethernet
- Form Factor: Panel / Chassis Mount; Stand-alone
- Data Acquisition: Datalogger
- Analog Channels: 6
from Festo Corporation
Compact programmable logic controller. Programming with CODESYS to IEC 61131-3. 12 digital inputs, 8 digital outputs, additionally 2 high-speed counters up to 250 kHz. Ethernet 10/100 Mbit/s. USB interface for data transfer. CECC-LK with CANopen, IO-Link ®, I-Port, and Modbus TCP protocol [See More]
- Host Connection: RS232/422/485; USB; Ethernet
- DC Voltage: 24 V DC
- Isolation: yes
- Frequency: 1000 kHz
from PCE Instruments / PCE Americas Inc.
Accurate Data- Logger meter with connection port, memory,. software for measuring wind speed, temperature and Data- Logger. This Data- Logger meter is very economical. With this Data- Logger meter you can measure wind speed and air temperature. Once you have the right cross section, the Data- Logger... [See More]
- Host Connection: RS232/422/485
- Form Factor: Stand-alone
- Data Acquisition: Datalogger
- User Interface: Front Panel
from RS Components, Ltd.
Humidity & Temperature Data Logger [See More]
- Host Connection: RS232/422/485; RS232
- Analog Channels: 1
- Data Acquisition: Datalogger
- Inputs: Capacitive, Semiconductor
from Dataforth Corporation
The MAQ20 communications module is offered in two models and provides the connection between a host computer and a MAQ ®20 Data Acquisition System. MAQ20-COM4 communicates using Ethernet, USB, or RS-485; MAQ20- COM2 uses Ethernet, USB, or RS-232. Ethernet communications use the Modbus TCP... [See More]
- Host Connection: RS232/422/485; USB; Ethernet
- Isolation: 50VDC Interface-to-Bus Isolation
- Digital I/O Channels: 24
- User Interface: Computer Programmable
from Advantech
16DI Modbus RS-485 Remote I/O. 16ch digital input. Protocols:Modbus RTU,ASCII. Watchdog timer to recover the system. 2500VDC isolation protection [See More]
- Host Connection: RS232/422/485
- DC Voltage: 10~30 VDC
- Data Acquisition: Input/Output Module
- Operating Temperature: 14 to 158
from ABB Measurement & Analytics
The C1900 is a general purpose circular chart recorder with up to 4 pen recording providing full application flexibility. Pen ranges can be individually set to give the best resolution for each signal and the time per revolution can be selected from between one hour and thirty-two days. User... [See More]
- Host Connection: RS232/422/485; TTL
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Chart Recorder
- Analog Channels: 4
from Tempco Electric Heater Corporation
Product Overview. The PPS Series is a major advance in the market for Paperless Videographic Data Recorders incorporating Touch Screen Technology for set-up and programing. The PPS Series encompasses three models: • The PPS-1000 for basic 3 or 6 channel recording on a 4.3" screen. • The... [See More]
- Host Connection: RS232/422/485; Ethernet
- Form Factor: Panel / Chassis Mount; Stand-alone
- Data Acquisition: Datalogger
- Analog Channels: 24
from Festo Corporation
Individual components for the electrical terminal CPX [See More]
- Host Connection: RS232/422/485; Ethernet
- Operating Temperature: 23 to 122
- Network Options: Ethernet
from PCE Instruments / PCE Americas Inc.
Accurate data logger to measure air temperature and velocity with calculation. of volume of air current and RS-232 interface for data transfer. to a computer, software and cable is included This data logger has a good relation between price and quality and it combines accuracy and versatility with... [See More]
- Host Connection: RS232/422/485
- Form Factor: Stand-alone
- Data Acquisition: Datalogger
- User Interface: Front Panel
from RS Components, Ltd.
Humidity & Temperature Data Logger [See More]
- Host Connection: RS232/422/485; USB; RS232, USB
- Analog Channels: 2
- Data Acquisition: Datalogger
- Inputs: Probe
from Dataforth Corporation
The MAQ20 communications module is offered in two models and provides the connection between a host computer and a MAQ ®20 Data Acquisition System. MAQ20-COM4 communicates using Ethernet, USB, or RS-485; MAQ20- COM2 uses Ethernet, USB, or RS-232. Ethernet communications use the Modbus TCP... [See More]
- Host Connection: RS232/422/485; USB; Ethernet
- Isolation: 50VDC Interface-to-Bus Isolation
- Digital I/O Channels: 24
- User Interface: Computer Programmable
from Advantech
16DI RS-485 Remote I/O. 16ch digital input. Protocols: Modbus RTU,ASCII. Watchdog timer to recover the system [See More]
- Host Connection: RS232/422/485
- DC Voltage: 10~30 VDC
- Data Acquisition: Input/Output Module
- Operating Temperature: 14 to 158
from ABB Measurement & Analytics
The C1900 is a fully programmable circular chart recorder/controller combining two PID control loops with 4-pen recording. Analog, heat/cool, time proportioning or on/off control can all be selected as standard. Motorized valve operation, with or without feedback, is available as an option. The... [See More]
- Host Connection: RS232/422/485; TTL
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Chart Recorder
- Analog Channels: 4
from Tempco Electric Heater Corporation
Product Overview. The PPS Series is a major advance in the market for Paperless Videographic Data Recorders incorporating Touch Screen Technology for set-up and programing. The PPS Series encompasses three models: • The PPS-1000 for basic 3 or 6 channel recording on a 4.3" screen. • The... [See More]
- Host Connection: RS232/422/485; Ethernet
- Form Factor: Panel / Chassis Mount; Stand-alone
- Data Acquisition: Datalogger
- Analog Channels: 48
from PCE Instruments / PCE Americas Inc.
The PCE-PA 8000 Three Phase Power Data Logger is able to measure and record the power in both single-phase or three-phase circuits. With the PCE-PA 8000 Three Phase Power Data Logger you will be able to perform prolonged measurements. Measurement values are saved in xls format on the included SD... [See More]
- Host Connection: RS232/422/485
- Form Factor: Stand-alone
- Data Acquisition: Datalogger
- AC Voltage: 10 V ... 600 V (phase to neutral)
from RS Components, Ltd.
RSCAL(1232234) Hum & Temp Data Logger [See More]
- Host Connection: RS232/422/485; USB; RS232, USB
- Analog Channels: 2
- Data Acquisition: Datalogger
- Inputs: Probe
from Dataforth Corporation
The SCM9B-D100 Sensor to Computer Modules are a family of data acquisition modules that convert analog input signals to digital data and transmit via RS-485 to a controller which may be a computer or other processor-based equipment. The modules can measure temperature, pressure, voltage, current,... [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Input Module
- Analog Channels: 1
from Advantech
1AO RS-485 Modbus Remote I/O. 1ch analog output. Protocols:ASCII / Modbus. Watchdog timer to recover the system. 3000VDC isolation protection [See More]
- Host Connection: RS232/422/485
- Resolution: 16
- Data Acquisition: Input/Output Module
- DC Voltage: 10~30 VDC
from ABB Measurement & Analytics
Users of the AWT440 benefit from plug-and-play connectivity, automatic sensor recognition and set-up. Enabling: – Automatic connection of up to 4 digital sensor. – Intuitive software with full colour graphical display. – Data logging and graphical process trending. – Full... [See More]
- Host Connection: RS232/422/485; USB; Ethernet
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Datalogger
- Analog Channels: 4
from RS Components, Ltd.
RSCAL(1232231) Hum & Temp Data Logger [See More]
- Host Connection: RS232/422/485; RS232
- Analog Channels: 1
- Data Acquisition: Datalogger
- Inputs: Capacitive, Semiconductor
from Dataforth Corporation
The SCM9B-D100 Sensor to Computer Modules are a family of data acquisition modules that convert analog input signals to digital data and transmit via RS-485 to a controller which may be a computer or other processor-based equipment. The modules can measure temperature, pressure, voltage, current,... [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Input Module
- Analog Channels: 1
from Advantech
2Counter/2DO Modbus RS-485 Remote I/O. 2ch counter/2ch digital output. Protocols:Modbus RTU,ASCII. Watchdog timer to recover the system. 2500VRMS isolation protection. Counter frequency up to 50kHZ [See More]
- Host Connection: RS232/422/485
- DC Voltage: 10~30 VDC
- Data Acquisition: Input/Output Module
- Frequency: 50 kHz
from ABB Measurement & Analytics
The RVG200 recorder takes the established operating and security benefits of the ScreenMaster range one step further. Features include touchscreen ‘swipe ’ operation, front and rear USB ports for connecting peripheral devices (including a barcode scanner and keyboard) and Ethernet and... [See More]
- Host Connection: RS232/422/485; Ethernet
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Chart Recorder
- Analog Channels: 24
from RS Components, Ltd.
Multifunction transmitter Si-C320 with t [See More]
- Host Connection: RS232/422/485; RS485
- Analog Channels: 2
- Data Acquisition: Datalogger
- Inputs: Air Quality, Humidity, Temperature
from Dataforth Corporation
The SCM9B-D100 Sensor to Computer Modules are a family of data acquisition modules that convert analog input signals to digital data and transmit via RS-485 to a controller which may be a computer or other processor-based equipment. The modules can measure temperature, pressure, voltage, current,... [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Input Module
- Analog Channels: 1
from Advantech
4AO/4DI Modbus RS-485 Remote I/O. 4ch analog output/4ch digital input. Protocols:Modbus RTU,ASCII. Watchdog timer to recover the system. 3000VDC isolation protection [See More]
- Host Connection: RS232/422/485
- Resolution: 16
- Data Acquisition: Input/Output Module
- DC Voltage: 10~30 VDC
from ABB Measurement & Analytics
The WellTell-IS client is an intrinsically-safe barrier with integrated wireless capabilities and on-board battery charger. The WellTell-X host wirelessly interfaces an RTU or flow computer to other protocol based devices, eliminating the need for any wired connections. Depending on the distances... [See More]
- Host Connection: RS232/422/485
- User Interface: Front Panel
- Form Factor: Panel / Chassis Mount
- Application: General Lab & Industrial
from RS Components, Ltd.
Multifunction transmitter Si-C320 with t [See More]
- Host Connection: RS232/422/485; RS485
- Analog Channels: 2
- Data Acquisition: Datalogger
- Inputs: Air Quality, Humidity, Temperature
from Dataforth Corporation
The SCM9B-1000/2000 Sensor-to-Computer Modules are a family of complete solutions designed for data acquisition systems based on personal computers and other processor-based equipment with standard serial I/O ports. The modules convert analog input signals to engineering units and transmit in ASCII... [See More]
- Host Connection: RS232/422/485; TTL
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Input Module; Input/Output Module
- Analog Channels: 1
from Advantech
4Relay RS-485 Remote I/O. 4ch relay. Protocols:Modbus RTU,ASCII. Watchdog timer to recover the system [See More]
- Host Connection: RS232/422/485
- DC Voltage: 10~30 VDC
- Data Acquisition: Input/Output Module
- Inputs: Relay / Switch Input
from RS Components, Ltd.
Multifunction differential pressure pane [See More]
- Host Connection: RS232/422/485; RS485
- Analog Channels: 1
- Data Acquisition: Datalogger
- Agency Approval: RoHS Compliant
from Dataforth Corporation
The 8B isoLynx ® SLX300 - Dataforth's newly introduced data acquisition system - builds on the proven reliability and outstanding performance of the SCM5B isoLynx ® SLX200 and the miniature-sized SensorLex ® 8B isolated signal conditioning modules to provide a compact, low cost solution... [See More]
- Host Connection: RS232/422/485; USB; Ethernet
- Form Factor: PC Board; Panel / Chassis Mount (optional feature); DIN Rail (optional feature)
- Data Acquisition: DAQ Instrument; Input/Output Module
- Analog Channels: 12
from Advantech
6RTD Modbus RS-485 Remote I/O. 6ch RTD. Protocols:Modbus RTU,ASCII. Watch dog to recover the system. 3000VDC isolation protection. Wiring burned-out detection function [See More]
- Host Connection: RS232/422/485
- Sampling Frequency: 0.0100
- Data Acquisition: Input/Output Module
- Resolution: 16
from RainWise, Inc.
The RainWise RainLog data logger provides an economical method of logging rainfall at a remote location where power is not available. This battery operated logger fits inside our polypropylene rain gauge and will log total rainfall at a one minute resolution for up to one year. It can easily be... [See More]
- Host Connection: RS232/422/485
- Form Factor: Stand-alone
- Data Acquisition: Datalogger
- Analog Channels: 1
from Stellar Technology
The Series AP50XX is a reliable, rugged signal conditioner. with a variety of acceptable inputs and available outputs. The. unit is enclosed in a stainless steel housing and is protected. against environmental conditions including vibration. Options. include a variety of electical terminations, EMI... [See More]
- Host Connection: RS232/422/485
- Isolation: Isolated Analog Voltage Output
- Form Factor: Line Mount
- Outputs: Analog Voltage Output; Analog Current Output
from LufftUSA
Description: The LCOM (Lufft-Communicator) is an industrial PC with the Windows-CE operating system. The following interfaces are available for communication purposes: USB, CDMA modem (RS232), Partyline modem (RS232) or UMB bus (RS485). Conversion to the following standard protocols can be made in... [See More]
- Host Connection: RS232/422/485; USB; Ethernet
- Form Factor: Industrial PC
- Data Acquisition: Datalogger
- User Interface: Touch Screen
from Gantner Instruments, Inc.
Q.bloxx XE is a new addition to the Q.series product family - the ideal EtherCAT DAQ solution for widely distributed installations that require higher performance and custom sensor terminations. Q.bloxx XE measurement modules possess integrated signal conditioning and arithmetic functions, packaged... [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 4
from Siemens Process Instrumentation
The SIREC D300 is a multi-functional 144 mm x 144 mm display recorder with 8 to 16 analog channels and up to 16 digital channels. The wide range of SIREC D products accommodates continuous monitoring, system maintenance, process optimization and troubleshooting requirements. Fast scanning rate of 20... [See More]
- Host Connection: RS232/422/485; USB; Ethernet
- Analog Channels: 16
- Data Acquisition: Datalogger
- Digital I/O Channels: 16
from Sifam Tinsley UK
Gamma 30 Data logging, data processing, data analysis, data recording, Y(t) recorder XY recorder. Features. • Storing Data in Offline /online mode. • Transmission of data to PC in Online mode via RS 232 serial interface. • Optically isolated transmission from multi meter to adapter. [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Datalogger
- Analog Channels: 1
from Acromag, Inc.
913MB: 4 current input channels. 914MB: 4 voltage input channels. 4 input channels. 0 to 20mA DC (0 to 20A AC with AC sensor) or ±10V DC input range. 4 alarm channels, open drain MOSFETS (1A DC loads, 0 to 35V DC). 10 to 36V DC, 24V AC power. Modbus RTU high-speed RS-485. This signal... [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Input Module
- Analog Channels: 4
from NorPix, Inc.
StreamPix is Norpix ’s flag ship software product. Resulting from more than 10 years of interaction with our vast group of customers, StreamPix has become the ultimate Digital Video Recording software. It offers a state of the art user interface, and an enormous amount of usage flexibility for... [See More]
- Host Connection: RS232/422/485; Firewire; TTL; Ethernet
- Form Factor: Panel / Chassis Mount; Rack Mount; Stand-alone
- Data Acquisition: Data Acquisition Card; DAQ Instrument; Datalogger; Input Module; Input/Output Module
- Analog Channels: 32
from CAS DataLoggers
CAS is pleased to announce the new ADwin-X-A20 compact data acquisition and control system. It features a high performance, dual-core, 64-bit processor plus analog and digital inputs and outputs and a 1GB Ethernet communications interface to provide extremely precise, low latency real-time... [See More]
- Host Connection: RS232/422/485; USB; TTL; Ethernet
- Form Factor: DIN Rail (optional feature); Stand-alone
- Data Acquisition: DAQ Instrument; Datalogger
- Analog Channels: 8
from MBW Calibration AG
The T12 is a highly precise and stable platinum resistance thermometer (PRT) based multichannel temperature measurement system. Using a custom designed high quality measurement circuit, 24 bit analog to digital converters and multiplexor sampling; the T12 provides 12 channels of low uncertainty... [See More]
- Host Connection: RS232/422/485; USB
- Form Factor: Stand-alone
- Data Acquisition: Input Module
- Analog Channels: 12
from Define Instruments
What it does: Enables sophisticated monitoring, control and data logging of up to 16 input signals from a variety of sources. Easy DAQ and onboard data logging. Get all your data acquisition (DAQ) requirements fulfilled with the Zen Datalogger. It logs data onto a 1GB micro SD card, so you can... [See More]
- Host Connection: RS232/422/485; USB; Ethernet
- Form Factor: DIN Rail
- Data Acquisition: Datalogger; Input Module
- Analog Channels: 16
from West Control Solutions
The DataVU 5 paperless recorder is designed to provide a fast and easy set up through user friendly controls. Set up is so simple that it can be carried out on the spot via the front panel without the need for a PC. Configuration is carried out using a combination of fixed keys and menu led soft... [See More]
- Host Connection: RS232/422/485; USB; Ethernet; Profibus-DP
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Datalogger; Chart Recorder
- Analog Channels: 6
from Haida International Equipment Co., Ltd.
Features: 1. Advanced CCD technology for scanning with max. distance of 450mm;. 2. High scanning speed. of 400 times / second. with better readability for rough bar code than laser equipment;. 3. With bending scanning caliber for easy reading;. 4. The max. Figure no. Is 11 lines. 6rows;. 5. Equipped... [See More]
- Host Connection: RS232/422/485; USB
- Transmission Rate: 115
- Data Acquisition: DAQ Instrument
- Application: General Lab & Industrial
from WINSYSTEMS, INC.
WinSystems ’ industrial PCM-SDIO combines both four serial and 48 digital I/O lines onto a single PC/104 module. This can eliminate one board in a stack without sacrificing any features or benefits. The digital portion is further enhanced since its I/O can interface with up to 30 volt signals. [See More]
- Host Connection: Direct Backplane Interface; RS232/422/485
- Form Factor: PC Board
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 96
from Diversified Technical Systems, Inc. (DTS)
Each TDAS G5 DAS module is a completely independent data acquisition system that can be used stand alone or linked together to create large test set-ups. Each module is available in 32-channel and 24-channel versions with options for greatly expanded memory. Also, DTS has added High Bandwidth... [See More]
- Host Connection: RS232/422/485; Ethernet
- Form Factor: Modular Bay or Slot System; Stand-alone
- Data Acquisition: DAQ Instrument
- Analog Channels: 32
from Opto 22
The E2 brain board is an Ethernet-ready I/O and communication processor for analog I/O systems. Designed as a drop-in replacement for Opto 22's serial-based B2 brain board, the E2 supports both serial and Ethernet networking and multiple simultaneous protocols, including Optomux, OptoMMP, and... [See More]
- Host Connection: RS232/422/485; Ethernet
- Form Factor: Modular Bay or Slot System
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 16
from D-TACQ Solutions
The ACQ216CPCI board represents the first in a new generation of intelligent high performance Analog Data Acquisition products from D-TACQ Solutions Ltd. The board samples 16 input channels simultaneously with 14 bit resolution at speeds up to 50 MSPS (mega-samples per second) and offers excellent... [See More]
- Host Connection: RS232/422/485; TTL; Ethernet
- Form Factor: PC Board
- Data Acquisition: Data Acquisition Card; Input Module
- Analog Channels: 16
from Campbell Scientific, Inc.
The CR5000 is a rugged, high performance, integrated datalogger/data acquisition system with a built-in keyboard, graphics display, and PCMCIA card slot. It combines 16-bit resolution with a maximum throughput of 5000 measurements per second. The CR5000 is available with a built-in sealed... [See More]
- Host Connection: RS232/422/485
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Datalogger
- Differential Channels: Differential Channels
from OMEGA Engineering, Inc.
The DPF701 Series ratemeter/ totalizer offers user programming via the 5 front-panel keys. Scale factor may be programmed from -99,999 to 999,999 (any decimal point, multiply or divide), while offset may be programmed from -99,999 to 999,999 (any decimal point). Programs are stored in non-volatile... [See More]
- Host Connection: RS232/422/485; TTL
- Form Factor: Stand-alone
- Data Acquisition: Datalogger
- Analog Channels: 1
from CHINO Works America Inc.
SE3000 series scanning units are designed for data logging with a personal computer. The basic unit with 6 input points can be connected to 7 sub units (6 input points / sub unit) and maximum 48 analog data can be collected. Two soft ware packages, "KIDS" for data logging and "PASS" for parameter... [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Datalogger
- Analog Channels: 6
from PMC Engineering LLC
The DL/N series is part of a comprehensive range of transmitters specifically designed for the long term monitoring of ground water, wastewater and tank level measurement. The Series 70 provides a sophisticated datalogger which includes the monitoring of level, conductivity and temperature... [See More]
- Host Connection: RS232/422/485
- Accuracy: 0.2500
- Data Acquisition: Datalogger
- User Interface: None
from Willowglen Systems Inc.
The Willowglen FloLog ™ Gas Well Flow Logger is a flexible, cost effective and extremely energy efficient solution for remote gas well Electronic Flow Measurement (EFM) applications. With its hazardous area certification and battery operation, the FloLog ™ device is ideal for use at well... [See More]
- Host Connection: RS232/422/485
- Form Factor: Stand-alone
- Data Acquisition: Datalogger
- Accuracy: 0.1500
from SOCOMEC
DATALOG H40 and H60 dataloggers associated with Socomec wireless interfaces enable you to create a smart energy data communication network in order to : • Remotely and automatically read multi-fluid energy meters and multi-function meters, isolated or not. • Centralise, secure and make... [See More]
- Host Connection: RS232/422/485; Ethernet
- Form Factor: Stand-alone
- Data Acquisition: Datalogger
- User Interface: None
from Embedded Data Systems
Traceability - every PIR2 has a unique serial number. Supports all Maxim/Dallas Semiconductor iButtons. Collects the time and iButton identity for touch events. Secure NV Memory capacity to hold 500 readings. Visual & auditory feedback ensures ease of use. High integrity data - all records... [See More]
- Host Connection: RS232/422/485; USB; 1-Wire
- Operating Temperature: -4 to 129
- Data Acquisition: Datalogger
from LumaSense Technologies, Inc., An Advanced Energy Company
The LumaSHIELD ®, designed for Smart Grid integration, is fitted with an internal reference that allows regular self-verification and correction of its fully traceable calibration. The internal reference provides long- term accuracy in the adverse conditions encountered in a distribution... [See More]
- Host Connection: RS232/422/485; Ethernet (optional feature)
- Form Factor: Panel / Chassis Mount
- Data Acquisition: DAQ Instrument
- Analog Channels: 16
from Fluidwell bv
M853 is an ultra-low power “all-in-one ” Data Acquisition & Communication Module including datalogging, designed for a wide-range industrial applications. The M853 can be fully configured according to your process requirements. No additional signal converters / amplifiers,... [See More]
- Host Connection: RS232/422/485
- Form Factor: Modular Bay or Slot System; Stand-alone
- Data Acquisition: DAQ Instrument; Datalogger; Input Module
- Analog Channels: 4
from Clark Solutions
Simultaneous display of rate and total makes the 2-line PD6200 Rate/Totalizer an ideal choice for flow applications. The PD6200 may be configured for a variety of analog input signals, while the PD6300 will take pulse input signals. Via the UV-resistant, NEMA 4X front panel, the main and secondary... [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Datalogger
- Analog Channels: 1
from Electro-Sensors, Inc.
Universal-Input Shaft Speed Measurement with Alarms and DeviceNet Network Interface. Features. • Compatible with most pulse-output sensors. • Provides isolated DC sensor power. • Two dual-purpose inputs may be used to measure. two speed-only sensors or one speed+direction (quadrature... [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Input Module
- Analog Channels: 2
from Apix, Inc.
DESCRIPTION. The ISODIN Series DIN Modules feature 8 independent Analog channels and conform to the Industry Standard Modbus RTU Communications Protocol. Based on their high channel density, a single 32 module segment includes 256 c [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Input Module; Output Module; Input/Output Module
- Analog Channels: 8
from Rotronic Instrument Corp.
The HygroLog HL-NT humidity, dew point and temperature data logger can be used with any of the HygroClip 2 probes. The HL-NT can monitor up to 7 probes as well as up to two external on/off contacts, such a a door contact. When used together with the validated ROTRONIC HW4 software the HygroLog HL-NT... [See More]
- Host Connection: RS232/422/485; USB
- Form Factor: Stand-alone
- Data Acquisition: Datalogger
- User Interface: Front Panel
from Mitsubishi Electric Automation, Inc.
ST Series is a distributed I/O system that operates as a slave device for either CC-Link or Profibus device level networks. This modular system features a head unit, power supply and compact I/O that snaps quickly together on DIN rail to form a remote system or node. This modular system enables... [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Input/Output Module
- Analog Channels: 2
from Spire Metering Technology
Spire Metering offers specialized software solutions designed to deliver critical data necessary for analytic review. Having transparent and secure data readily available moves toward improved operational efficiency and resource management. The SpireCaptureTM system is a cutting edge fixed automatic... [See More]
- Host Connection: RS232/422/485; Ethernet; Radio; Modbus, BACnet
- Form Factor: Stand-alone
- Data Acquisition: Datalogger
- Application: General Lab & Industrial
from Kipp & Zonen, Inc.
4 differential and 4 single-ended analogue inputs, 4 digital inputs. Connect up to 8 Kipp & Zonen Smart radiometers. Quad-band GSM/GPRS modem with external antenna. Send data to an e-mail address or FTP server. LOGBOX SE is a data logger with analogue and digital inputs that allow connection to... [See More]
- Host Connection: RS232/422/485; USB
- Form Factor: Stand-alone
- Data Acquisition: Datalogger
- Analog Channels: 4
from Ultra Energy
Fiber Optic Module: MXRS-2 Input & Output Module, RS232/485 – 2 channels, MX Multiplexers [See More]
- Host Connection: RS232/422/485
- Analog Channels: 2
- Data Acquisition: Input/Output Module
- User Interface: None
from Automation24, Inc.
Fieldlogger 8812120000 from NOVUS automation is a dynamic and versatile solution for keeping track of data points simultaneously, while also providing alarm outputs when needed. The 8812120000 data logger provides 8 digital input/output points, as well as 8 analog inputs and 2 relay outputs. The... [See More]
- Host Connection: RS232/422/485; USB; Ethernet; Ethernet, MODBUS (RS-485), USB
- Form Factor: DIN Rail; DIN rail
- Data Acquisition: Datalogger
- Digital I/O Channels: 8
from Monarch Instrument
If you demand: Higher reliability. Increased flexibility. Optimum efficiency. Lower costs. DataChart 2000 Series Paperless Recorders are the instruments for you!. Overview. The Data-Chart 2000 has 2, 4, 6 or 12 direct universal isolated inputs that are menu selectable for DC voltage, DC current,... [See More]
- Host Connection: RS232/422/485; Ethernet
- Form Factor: Panel / Chassis Mount; DIN Rail; Stand-alone
- Data Acquisition: Datalogger; Chart Recorder
- Analog Channels: 12
from Meter Group
The hand-held ProCheck gives you a read-out and stores reading from any of Decagon's soil moisture or environmental sensors. When you are using the ProCheck to read soil moisture sensors, you can pick from a list of supplied factory calibrations (both soil and soilless media) or input your own... [See More]
- Host Connection: RS232/422/485
- Form Factor: Stand-alone
- Data Acquisition: Datalogger; Output Module
- User Interface: Front Panel; Hand-held Programmer
from Instrumented Sensor Technology
Use IST's new MotionMaster ™ a portable accelerometer that ’s used as an acceleration data logger that has angular rate sensors and to characterize 6DOF motion environments of amusement rides, airborne vehicles, watercraft, underwater vehicles, vehicular crashes, shipping environments... [See More]
- Host Connection: RS232/422/485; USB
- Inputs: Accelerometer Input
- Data Acquisition: Datalogger
- User Interface: None
from Piezo-Metrics
PCB version of the load cell amplifier display for weighing (LCA20). Simple auto calibration. Sensitivity from 0.5 to 7.8 mV/V. Full digital set –up using PC or keypad. 3 x configurable digital inputs e.g. for autotare, peak hold and reset. Fully isolated 4-20 mA and 0-10 V analogue outputs. [See More]
- Host Connection: RS232/422/485
- Digital I/O Channels: 3
- Data Acquisition: Output Module
- Inputs: Bridge Input
from Extreme Engineering Solutions, Inc. (X-ES)
The XIt1036 provides I/O expansion for 3U cPCI SBCs. The XIt1036 provides rear panel connectors for two 10/100/1000BASE-T ports, a USB port, a SATA port, an HDMI port, and two RS-232 serial ports via micro-DB-9 connector. The XIt1036 provides board connectors for an additional USB port and three... [See More]
- Host Connection: RS232/422/485; USB
- Form Factor: PC Board; 3U cPCI
- Data Acquisition: Input/Output Module
- Network Options: Ethernet; 2 10/100/1000BASE-T
from Next Industries S.r.L
The OMNIAlog MI400 MAVT is an ultra low powered logger with integral modem designed specifically for remote applications. The next step up from the MI400 MAV, it has more analogue inputs and Modbus slave capabilities. 4 differential software programmable analog input. Each of the 4 channels offers... [See More]
- Host Connection: RS232/422/485; USB; Ethernet
- Analog Channels: 4
- Data Acquisition: Datalogger
- Differential Channels: Differential Channels
from OTEK Corporation
OTEK's Process Data Logger PDL (3.78"W x 3.78"H x 3"D) was specifically designed to satisfy the need for long term and capacity data logging in "burn in" ovens for the semiconductor industry, as well as other high reliability applications. The PDL is loaded with the latest technology (ARM7... [See More]
- Host Connection: RS232/422/485; USB; Ethernet
- Form Factor: Modular Bay or Slot System
- Data Acquisition: Datalogger
- Analog Channels: 48
from Electro Standards Laboratories
The CellMite ® ProD Model 4328 is a high performance data acquisition and strain gage interface module from Electro Standards Laboratories that is suitable for embedded applications that require high speed and high accuracy analog and digital data acquisition. The CellMite ® ProD features... [See More]
- Host Connection: RS232/422/485; USB; Ethernet
- Form Factor: PC Board
- Data Acquisition: Input/Output Module
- Analog Channels: 4
from ACCES I/O Products, Inc.
Features. 8 Optically-Isolated, Non-Polarized Digital Inputs with Change-of-State Detection. 8 Form C SPDT Electromechanical Relays Can Switch Up to 1 Amp Each. Relays Can be Configured for Level or Pulse Modes. Microcontroller with SRAM and EEPROM. Built-in Watchdog Timer. NEMA4 Enclosure for Harsh... [See More]
- Host Connection: RS232/422/485; Radio
- Form Factor: Stand-alone
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 8
from Aries Engineering Co., Inc.
HyperView-Press ® Monitoring System provides the easiest to use, most comprehensive and highest reliability press monitoring available. With the most consistent test results and less false failures, the HyperView-Press ® will help you achieve your yield and quality objectives. Easy... [See More]
- Host Connection: RS232/422/485
- Form Factor: Stand-alone
- Data Acquisition: DAQ Instrument
- Analog Channels: 4
from Sealevel Systems, Inc.
The SeaI/O-430N adds 32 optically isolated inputs to your SeaI/O network. Compatible with all SeaI/O base units (Ethernet, USB, RS-485, RS-232), the SeaI/O-430N connects easily using an RS-485 input. Cabling is accomplished via the units RJ45 connector or removable screw terminals. RS-485 line... [See More]
- Host Connection: RS232/422/485
- DC Voltage: 5-30 VDC
- Data Acquisition: Input/Output Module
- Operating Temperature: 32 to 158
from ANZER
Converter,DNet-ASCII,RS485 iso [See More]
- Host Connection: RS232/422/485
- Form Factor: PC Board
- Data Acquisition: Input/Output Module
from Red Pitaya, d.o.o.
SDRlab 122-16 External clock is based on the SDRlab 122-16 model that is modified to be used with an external clock oscillator, which is important especially for RF applications that operate at other frequencies, require better quality clock or clock synchronization. [See More]
- Host Connection: RS232/422/485; USB; TTL; Ethernet; WiFi
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Data Acquisition: Data Acquisition Card; DAQ Instrument; Datalogger; Chart Recorder; Input Module; Output Module (optional feature); Input/Output Module
- Analog Channels: 6
from Moxa Inc.
Simple Applications without Programming. The ioLogik E2210 can convert a trigger event result directly into a digital alarm output. This can be set up using the ioAdmin UI to define an IF-THEN-ELSE Logic rule, eliminating the need to write programs for PCs or controllers. Software Event Counter... [See More]
- Host Connection: RS232/422/485; Ethernet
- Form Factor: Stand-alone
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 20
from RainWise, Inc.
Display Console and Data Logger. The WeatherLog ® System 12 Control/Display Console was developed to meet those applications which require a large number of sensors and/or a number of extra display parameters, such as averaging, daily records, etc. Product Features. The System 12 has two serial... [See More]
- Host Connection: RS232/422/485
- Form Factor: Stand-alone
- Data Acquisition: Datalogger
- Outputs: Analog Current Output (optional feature)
from LufftUSA
Description: The Opus20E offers the highest flexibility and is excellent value for money. It allows the connection of up to 4 external temperature and relative humidity sensors, as well as 2 further analogue sensors. Intelligent BUS sensors can be integrated via the OPUS20E ’s RS485 interface... [See More]
- Host Connection: RS232/422/485; USB
- Form Factor: DIN Rail
- Data Acquisition: Datalogger
- DC Voltage: 0-1V
from Gantner Instruments, Inc.
Q.bloxx XL is a new addition to the Q.series product family - the ideal DAQ solution for widely distributed installations that require higher performance and custom sensor terminations. Q.bloxx XL products are packaged in modular, DIN Rail mountable enclosures that easily snap together for system... [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 4
from Siemens Process Instrumentation
The SIREC D400 is a high-end 300 mm x 300 mm XGA display recorder with 16 to 48 analog channels and up to 48 digital channels. The wide range of SIREC D products accommodates continuous monitoring, system maintenance, process optimization and troubleshooting requirements. Fast scanning rate of 20 /... [See More]
- Host Connection: RS232/422/485; USB; Ethernet
- Analog Channels: 48
- Data Acquisition: Datalogger
- Digital I/O Channels: 48
from Sifam Tinsley UK
Features. • Visualisation of current and archived data according to customer configuration (synoptic maps, charts, tables) by any web browser. • Readout up to 2500 values from slave devices (up to 100 devices, each 25 registers). • User-friendly application for data configuration. [See More]
- Host Connection: RS232/422/485; USB; Ethernet
- Form Factor: DIN Rail
- Data Acquisition: Datalogger
- Analog Channels: 2
from Acromag, Inc.
4 analog output channels. 0 to 20mA or 0 to 10V DC output range. 4 discrete output channels, open drain MOSFETS (1A DC loads, 0 to 35V DC). 10 to 36V DC, 24V AC power. Modbus RTU high-speed RS-485. These modules drive four analog output channels and also feature four discrete outputs for on/off... [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Output Module
- Digital I/O Channels: 4
from CAS DataLoggers
The Delphin ProfiMessage Data Acquisition System is a modular device for data acquisition and automation. A master/slave design makes ProfiMessage suitable for both small and large applications that require the processing of thousands of channels. Master and slave devices can each accommodate two... [See More]
- Host Connection: RS232/422/485; USB; Ethernet; Radio
- Form Factor: DIN Rail; Stand-alone
- Data Acquisition: DAQ Instrument; Datalogger; Input Module; Output Module
- Analog Channels: 15
from Define Instruments
Enables sophisticated monitoring and control of up to 16 input analog signals from a variety of sources. Get multiple analog signals into your PLC or SCADA system. The Zen RTU Mini is ideal for applications requiring collation of multiple signal types routed directly to a master console for... [See More]
- Host Connection: RS232/422/485; USB
- Form Factor: DIN Rail
- Data Acquisition: Input Module
- Analog Channels: 16
from West Control Solutions
DataVU 7 provides advanced flexibility to meet a user ’s specific requirements without the need to change a process to fit the recorder. If process requirements are subject to change at a later date then the user benefits from the ease with which modifications can be made to the recorder... [See More]
- Host Connection: RS232/422/485; USB; Ethernet; Profibus-DP
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Datalogger; Chart Recorder
- Analog Channels: 24
from Opto 22
Remote Analog 8-channel Multifunction I/O Unit Mistic Protocol [See More]
- Host Connection: RS232/422/485
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Input/Output Module
- Analog Channels: 16
from D-TACQ Solutions
14 bit ADC per channel for true simultaneous analog input. High throughput: 2MSPS/channel (32 channels), 4MSPS/channel (16 channels). continuous converted data transfer to local memory, or offboard via CPCI backplane. Oversampling options with filtered, decimated output: 8MSPS Input Sample Rate,... [See More]
- Host Connection: RS232/422/485; SCSI; TTL; Ethernet
- Form Factor: PC Board
- Data Acquisition: Data Acquisition Card; Input/Output Module
- Analog Channels: 32
from Campbell Scientific, Inc.
Campbell Scientific replaced the CR200-series dataloggers with the CR200X-series dataloggers. The new dataloggers feature expanded memory for the program and operating system (OS). The expanded memory allows: Up to 128 public variables instead of 48. Up to eight tables instead of four. Compiled... [See More]
- Host Connection: RS232/422/485
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Datalogger
- Analog Channels: 8
from OMEGA Engineering, Inc.
The portable RDXL4SD (accepts t/c or RTD) and RDXL12SD (accepts t/c input only) models are handheld thermometer/data loggers with backlight display and built-in analysis functions. The data loggers are powered by an internal battery and are capable of sampling, processing and displaying measurements... [See More]
- Host Connection: RS232/422/485; USB
- Form Factor: Portable
- Data Acquisition: Datalogger
- Analog Channels: 4
from CHINO Works America Inc.
Handy logger MR2041 is a palm size data logger, it capable to store up to 10000 data per each channel. Power supply of logger is selectable from AA battery or AC adaptor, so it is usable as a portable type logger or fixing type logger. Using the exclusive software, recording/recalling of data and... [See More]
- Host Connection: RS232/422/485
- Form Factor: Stand-alone
- Data Acquisition: Datalogger
- Analog Channels: 4
from PMC Engineering LLC
The PMC Water Level Datalogger is a simple, effective and economical system designed to measure water level using a datalogger and pressure sensor. The Water Level Datalogger is valuable in level monitoring applications such as aquifer characterization, environmental remediation, well or tank level... [See More]
- Host Connection: RS232/422/485
- Accuracy: 0.2500
- Data Acquisition: Datalogger
- User Interface: None
from SOCOMEC
DIRIS A60 is a panel mounted multifunction meter which incorporates all functions of the DIRIS A40 with the addition of enhanced data logging functions, recording curves for quality events. All this information can be analysed remotely using the Analysis software which is available at no charge and... [See More]
- Host Connection: RS232/422/485; Ethernet
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Datalogger
- Accuracy: 0.2000
from Clark Solutions
The Equflow range of flow sensors has low flow sensing capabilities in a wide range of applications, and is suitable for clear, opaque, neutral, corrosive and aggressive liquids including fuel. An ultra-lightweight turbine follows the fluctuation of flow very accurately and generates a high... [See More]
- Host Connection: RS232/422/485
- Form Factor: Stand-alone
- Data Acquisition: Input Module
- Digital I/O Channels: 0
from Mitsubishi Electric Automation, Inc.
CC-Link IE Field is a flexible Control and Device level network that is based on 1GBit Industrial Ethernet. This network can be configured to interconnect automation devices or be used to control distributed I/O systems. When configured for remote I/O, systems will generally include a slave head... [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Input/Output Module
- Outputs: Analog Voltage Output; Analog Current Output
from Automation24, Inc.
Fieldlogger 8812120004 from NOVUS automation is a dynamic and versatile solution for keeping track of data points simultaneously, while also providing alarm outputs when needed. An exclusive color HMI can be attached or remotely installed for local indication or configuration. The 8812120004 data... [See More]
- Host Connection: RS232/422/485; USB; Ethernet; Ethernet RJ45, Mobbus (RS485), USB
- Form Factor: DIN Rail; DIN rail 35 mm
- Data Acquisition: Datalogger
- Analog Channels: 8
from Monarch Instrument
The DataChart 6000 is the most advanced paperless recording system available. It incorporates the latest in measurement, communication, interface and processing technologies to deliver unmatched performance for your data acquisition application. The Data Chart 6000 is like no other paperless... [See More]
- Host Connection: RS232/422/485; USB; Ethernet
- Form Factor: Panel / Chassis Mount; DIN Rail; Stand-alone
- Data Acquisition: Datalogger; Chart Recorder
- Analog Channels: 12
from Meter Group
The Em5b is a five-channel mini-logger for use with select ECH2O sensors*. It is a low-cost, limited-use alternative to the Em50 datalogger. The Em5b uses 4 AAA-size alkaline batteries, which should last 5-6 months, and has 49K of Flash Data memory (145 days at 1 scan/hour). The Em5b comes with... [See More]
- Host Connection: RS232/422/485
- Form Factor: Stand-alone
- Data Acquisition: Datalogger
- Analog Channels: 5
from Instrumented Sensor Technology
Triggered Waveform Recording. 3 & 6 - Channel Capabilities. 12-bit A/D, 74dB Dynamic Range. Programmable Digitization to 15 KHz/CH. Three Single-Ended Inputs. Three Differential Inputs. Internal PR Triaxial Accelerometer (Rentals Offered). Constant-Current Excitation For Low-Bias PE Accels. User... [See More]
- Host Connection: RS232/422/485; Parallel
- Inputs: Accelerometer Input
- Data Acquisition: Datalogger
- User Interface: None
from Piezo-Metrics
Measurement speeds of 10 / 80 samples per sec. 5 V excitation supports up to 10 x 350 R load cells. Sensitivity from 0.5 to 7.8 mV/V. Full digital set –up using PC or keypad. 3 x configurable digital inputs e.g. for auto tare, peak hold and reset. Fully isolated 4-20 mA and 0-10 V analogue... [See More]
- Host Connection: RS232/422/485
- Digital I/O Channels: 3
- Data Acquisition: Output Module
- Inputs: Bridge Input
from Extreme Engineering Solutions, Inc. (X-ES)
The XIt3012 provides access to two 10/100/1000BASE-T or two 10GBASE-T Ethernet ports from X-ES 3U VPX integrated PCI Express and Ethernet switches. The XIt3012 also provides a micro-DB-9 connector for interfacing with RS-232 I/O. Features. 3U VPX Rear Transition Module (RTM). Support for 3U VPX... [See More]
- Host Connection: RS232/422/485
- Form Factor: PC Board; 3U VPX
- Data Acquisition: Input/Output Module
- Network Options: Ethernet; 2 10/100/1000BASE-T, 2 10GBASE-T
from Next Industries S.r.L
The OMNIAlog MI480 is a smart datalogger that provides an extensive array of features that allow it to be used across a wide variety of applications. The MI480 is a robust, stand alone, low power data logger featuring USB memory stick support, 24 bit resolution, extensive communications capabilities... [See More]
- Host Connection: RS232/422/485; USB; Ethernet
- Analog Channels: 8
- Data Acquisition: Datalogger
- Differential Channels: Differential Channels
from Electro Standards Laboratories
Model 4329 connects directly to a standard strain gage, load cell, extensometer, or pressure transducer. Wireless communication to 1500 feet. Wireless network with up to 8 CellMites ®, no cables needed. Simplified distributed process measurements. Wireless transmission to Model 4329M Master... [See More]
- Host Connection: RS232/422/485
- Form Factor: Stand-alone
- Data Acquisition: Input Module
- Analog Channels: 1
from ACCES I/O Products, Inc.
Features. Intelligent Distributed Digital I/O. Opto-Isolated RS-485 Serial Interface to Host Computer. 24-Bits of Bit, Byte, and 24-bit Word Programmable I/O. Open Collector Digital Outputs for Sinking Up To 350mA. 50 Volt DC Compatible Digital Inputs and Outputs. 16-Bit Digital Input Event Counter... [See More]
- Host Connection: RS232/422/485
- Form Factor: Stand-alone
- Data Acquisition: Data Acquisition Card; Input/Output Module
- Digital I/O Channels: 24
from Sealevel Systems, Inc.
Multi-Standard PC/104+ Board for Avionics Interfaces Including MIL-STD-1553, H009, WB-194, ARINC 429, Digital and Avionics Discrete I/Os, and RS-485 Applications. The PC/104+ multi-standard board contains two dual-redundant channels of MIL-STD-1553 communication. The board is compatible with... [See More]
- Host Connection: RS232/422/485; PC/104+
- Operating Temperature: -40 to 185
- Data Acquisition: Input/Output Module
from Red Pitaya, d.o.o.
SDRlab 122-16 was developed specifically for software-defined radio and more demanding RF applications. [See More]
- Host Connection: RS232/422/485; USB; TTL; Ethernet; WiFi
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Data Acquisition: Data Acquisition Card; DAQ Instrument; Datalogger; Chart Recorder; Input Module; Output Module (optional feature); Input/Output Module
- Analog Channels: 6
from Moxa Inc.
Flexible Digital Input/Output Configuration. The ioLogik E2212 provides system integrators with the flexibility to handle various field demands with channels that can be configured by software for input or output operation. You can configure the I/O channels to suit your needs, for combinations such... [See More]
- Host Connection: RS232/422/485; Ethernet
- Form Factor: Stand-alone
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 20
from RainWise, Inc.
The EDL is an electronic data logger incorporating non-volatile memory and a low power or "sleep" mode. The logger accepts Rainwise sensors. The RainWise EDL logger incorporates a real time clock, 128K, 256K, 512K and 1MB bytes of Static non-volatile data RAM. Data save intervals are user selectable... [See More]
- Host Connection: RS232/422/485
- Form Factor: Frame, in NEMA 4X Enclosure
- Data Acquisition: Datalogger
- Analog Channels: 8
from Gantner Instruments, Inc.
Q.brixx XE is a new addition to the Q.series product family - the ideal EtherCAT DAQ solution for on-the-go applications in potentially harsh environments. Q.brixx XE DAQ systems consist of up to 10 measurement modules capable of up to 100 kHz sampling per channel and an integrated EtherCAT bus... [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 4
from Sifam Tinsley UK
Features. • Data readout and recording from devices with RS485 interface and Modbus RTU protocol. • 2 x RS485 interface with Modbus RTU protocol (Master and Slave). • 3-colour display (14 mm height), programmable in 3 ranges of the displayed value. • 21-point individual... [See More]
- Host Connection: RS232/422/485; MODBUS
- Form Factor: Rack Mount
- Data Acquisition: Datalogger
- Analog Channels: 2
from Acromag, Inc.
Active-Low Inputs, Sinking Outputs (Low-Side Switching). 12 input and/or 12 output channels. 0 to 35V DC I/O range. 10 to 36V DC, 24V AC power. Modbus-RTU high-speed RS-485. These modules provide twelve discrete input and/or output channels. Isolation separates the I/O, power, and network circuits. [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Input Module
- Digital I/O Channels: 12
from CAS DataLoggers
The Environmental Data Logger. The dataTaker DT82E is an intelligent data logger that was designed with environmental applications in mind. The DT82E is a robust, stand alone, low power data logger featuring USB memory stick support, 18 bit resolution, extensive communications capabilities and... [See More]
- Host Connection: RS232/422/485; USB; Ethernet; Modem
- Form Factor: Stand-alone
- Data Acquisition: DAQ Instrument; Datalogger
- Analog Channels: 6
from West Control Solutions
Designed with the latest innovations in recording technology, enclosures and functionality, the MRC 5000 is slim, trim and simple. The MRC 5000 is a digital circle chart recorder capable of measuring, recording and controlling up to two process variables from a variety of inputs. Finding a place to... [See More]
- Host Connection: RS232/422/485
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Chart Recorder
- Analog Channels: 2
from Opto 22
Remote Digital 16-channel Multifunction I/O Unit Mistic Protocol [See More]
- Host Connection: RS232/422/485
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 16
from Campbell Scientific, Inc.
The SDM-CAN interface allows a Campbell Scientific datalogger to sample data directly from a CANbus communications network. CANbus data can be stored (and synchronized) with other data values measured directly by the datalogger, allowing testing and verification of CANbus-based data alongside... [See More]
- Host Connection: RS232/422/485
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Input/Output Module
- User Interface: None
from OMEGA Engineering, Inc.
The D5000 Four Channel Sensor to Computer Modules are a family of complete solutions designed for data acquisition systems based on personal computers and other processor-based equipment with standard serial I/O ports. The modules convert four analog input signals to engineering units and transmit... [See More]
- Host Connection: RS232/422/485
- Form Factor: Screw Mount
- Data Acquisition: Output Module
- Analog Channels: 1
from CHINO Works America Inc.
AH4000 series is a hybrid recorder which employs bright and clear, easy to view LCD display. Measuring value display is prepared as 1 point display, multi-points simultaneous display and digital display + bar graph display. Various measuring and recording settings can be easily done by front key... [See More]
- Host Connection: RS232/422/485; Ethernet
- Form Factor: Stand-alone
- Data Acquisition: Datalogger; Chart Recorder
- Analog Channels: 24
from Automation24, Inc.
Fieldlogger 8812130000 from NOVUS automation is a dynamic and versatile solution for keeping track of data points simultaneously, while also providing alarm outputs when needed. The 8812130000 data logger provides 8 digital input/output points, as well as 8 analog inputs and 2 relay outputs. The... [See More]
- Host Connection: RS232/422/485; USB; MODBUS (RS-485), USB
- Form Factor: DIN Rail; DIN rail
- Data Acquisition: Datalogger
- Digital I/O Channels: 8
from Instrumented Sensor Technology
Our portable impact, shock and vibration recorder has a built-in tri-axial accelerometer along with many other features including easy setup and use and can be battery powered for over thirty days, onboard memory and more. Highlights: Measures Shock, Vibration & Temperature. Options for... [See More]
- Host Connection: RS232/422/485; USB
- Inputs: Accelerometer Input
- Data Acquisition: Datalogger
- User Interface: None
from Piezo-Metrics
Digital set-up and calibration using handheld plug-in display / keypad or comms. Optional local or remote LCD display and keypad. Fully isolated 4-20 mA and 0-10 V analog outputs. Wide range of plug-in input modules providing transducer excitation. High accuracy and high stability over a wide... [See More]
- Host Connection: RS232/422/485
- Form Factor: PC Board
- Data Acquisition: Input Module
- Digital I/O Channels: 2
from Extreme Engineering Solutions, Inc. (X-ES)
The XIt3013 provides access to up to 20 Ethernet ports routed from the XChange3013 switch. The XIt3013 also provides micro-DB-9 connectors for console connectivity. Features. 3U VPX Rear Transition Module (RTM). Twenty RJ-45 connectors to break out the 14x 10/100/1000BASE-T and 6x 1000BASE-X ports... [See More]
- Host Connection: RS232/422/485
- Form Factor: PC Board; 3U VPX
- Data Acquisition: Input/Output Module
- Network Options: Ethernet; 14 10/100/1000BASE-T, 6 1000BASE-BX
from Next Industries S.r.L
The OMNIAlog MI816 is a smart datalogger that provides an extensive array of features that allow it to be used across a wide variety of applications. The MI816C is a robust, stand alone, low power data logger featuring USB memory stick support, 24 bit resolution, extensive communications... [See More]
- Host Connection: RS232/422/485; USB; Ethernet
- Analog Channels: 16
- Data Acquisition: Datalogger
- Differential Channels: Differential Channels
from ACCES I/O Products, Inc.
Features. Remote intelligent analog and digital I/O unit with opto-isolated RS-485 serial interface to host computer. Eight differential or sixteen single-ended analog inputs, programmable gain and offset on a channel-by-channel basis, 12-bit resolution A/D converter. Programmable gains provide... [See More]
- Host Connection: RS232/422/485
- Form Factor: Stand-alone
- Data Acquisition: DAQ Instrument
- Analog Channels: 16
from Sealevel Systems, Inc.
The SeaI/O-450S provides 16 SPDT Form C relays. Connection to the host device is made via an RS-232 connection. The SeaI/O-450S is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options. Communicate with the SeaI/O-450S using industry standard Modbus RTU protocol... [See More]
- Host Connection: RS232/422/485
- Operating Temperature: 32 to 158
- Data Acquisition: Input/Output Module
from Red Pitaya, d.o.o.
SIGNALlab 250-12 is most sophisticated Red Pitaya product, built for more demanding industrial applications and research, where robustness and performance matter more than cost. [See More]
- Host Connection: RS232/422/485; USB; TTL; Ethernet; WiFi
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Data Acquisition: Data Acquisition Card; DAQ Instrument; Datalogger; Chart Recorder; Input Module; Output Module (optional feature); Input/Output Module
- Analog Channels: 6
from Moxa Inc.
Remote Ethernet Relay Control. The ioLogik E2214 is a stand-alone Active Ethernet I/O product with 6 digital inputs and 6 relay outputs. The DIN-Rail mountable E2214 can be connected to digital switches, alarm lights, buzzers, and warning sirens over Ethernet and IP-based networks. The ioLogik E2214... [See More]
- Host Connection: RS232/422/485; Ethernet
- Form Factor: Stand-alone
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 6
from RainWise, Inc.
The CC-3000 is our next generation data logger and computer interface. Connectivity, storage capacity and features have all been enhanced. The CC-3000 replaces the CC-2000 and MKIIICC interface. Please be sure to select the model that matches your weather station. Long range versions support LR... [See More]
- Host Connection: RS232/422/485; USB
- Form Factor: Stand-alone
- Data Acquisition: Datalogger
- User Interface: Computer Programmable
from Gantner Instruments, Inc.
Q.raxx XE is an new addition to the Q.series product family - the ideal 19 ” rackmount EtherCAT DAQ solution for applications that require high channel density and custom sensor terminations. Q.brixx XE DAQ systems can consist of an integrated EtherCAT bus coupler for communication and 10... [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 4
from Sifam Tinsley UK
Features. • Visualisation of current and archived data according to customer configuration (synoptic maps, charts, tables) by any web browser. • Readout up to 2500 values from slave devices (up to 100 devices, each 25 registers). • User-friendly application for data configuration. [See More]
- Host Connection: RS232/422/485; USB
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Datalogger
- Analog Channels: 12
from Acromag, Inc.
Active-High Inputs, Sourcing Outputs (High-Side Switching). 12 input and/or 12 output channels. 0 to 35V DC I/O range. 10 to 36V DC, 24V AC power. Modbus-RTU high-speed RS-485. These modules provide twelve discrete input and/or output channels. Isolation separates the I/O, power, and network... [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Input Module
- Digital I/O Channels: 12
from CAS DataLoggers
Internal GSM Modem. The dataTaker DT82EM is an intelligent data logger that incorporates a built-in GSM modem with email and SMS support for automated data and alarm transfer from remote sites. The DT82EM features USB memory stick support, 18 bit resolution, extensive communications capabilities and... [See More]
- Host Connection: RS232/422/485; USB; Ethernet; Modem
- Form Factor: Stand-alone
- Data Acquisition: DAQ Instrument; Datalogger
- Analog Channels: 2
from West Control Solutions
The MRC7000 Recorder/Controller is a microprocessor based circular chart instrument capable of measuring, displaying, recording and controlling up to two process variables from a variety of inputs. Record and control functions, alarm settings and other parameters are easily configured via the keys... [See More]
- Host Connection: RS232/422/485
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Chart Recorder
- Analog Channels: 2
from Opto 22
The E1 brain board is an Ethernet-ready I/O and communication processor for digital I/O systems. Designed as a drop-in replacement for Opto 22's serial-based B1 brain board, the E1 supports both serial and Ethernet networking and multiple simultaneous protocols, including Optomux, OptoMMP, and... [See More]
- Host Connection: RS232/422/485; Ethernet
- Form Factor: Modular Bay or Slot System
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 16
from Campbell Scientific, Inc.
Campbell Scientific replaced the CR200-series dataloggers with the CR200X-series dataloggers. The new dataloggers feature expanded memory for the program and operating system (OS). The expanded memory allows: Up to 128 public variables instead of 48. Up to eight tables instead of four. Compiled... [See More]
- Host Connection: RS232/422/485; Radio
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Datalogger
- Analog Channels: 8
from OMEGA Engineering, Inc.
#162;56 Thermocouple Channels in One Compact and Rugged Enclosure. ¢Supports Any Thermocouple Type on Any Channel. ¢Very Low Cost per Channel and Very High-Channel Density. ¢Attach Up to 16 Units Together for Up to 896 Channels per A/D Mainframe. The OMB-DBK90 module provides 56... [See More]
- Host Connection: RS232/422/485
- Form Factor: Rack Mount
- Data Acquisition: Input Module
- Differential Channels: Differential Channels
from CHINO Works America Inc.
AH3000 series conforming to CE-marking, UL and CSA is 180mm multi-point type hybrid recorders with a simultaneous display of multi-channel data, alarm display/printings and other unique features. A package software "KIDS" for data processing of measured values is available. [See More]
- Host Connection: RS232/422/485
- Form Factor: Stand-alone
- Data Acquisition: Chart Recorder
- Analog Channels: 6
from Automation24, Inc.
The Ecograph T RSG35 data logger from Endress+Hauser is used to securely and completely record and visualise all process sequences. Because every measured value counts, the universal data logger records, visualises and monitors all analogue or digital input signals. The measured values are displayed... [See More]
- Host Connection: RS232/422/485; USB; Ethernet; Ethernet, RS232, RS485, USB
- Analog Channels: 12
- Data Acquisition: Datalogger
- Digital I/O Channels: 6
from Extreme Engineering Solutions, Inc. (X-ES)
The XIt1095 provides I/O expansion for the XPedite2600 when hosted in an XChange3001 XMC-to-VPX adapter. Its T-shaped design fits in VITA 46.10 RTM slots and allows for convenient access to more I/O connectors than standard VITA 46.10 RTMs. The XIt1095 supports up to two RS-232/422/485 ports, one... [See More]
- Host Connection: RS232/422/485
- Form Factor: PC Board; 3U VPX
- Data Acquisition: Input/Output Module
- Network Options: Ethernet; 3 10/100/1000BASE-T
from ACCES I/O Products, Inc.
Features. Remote intelligent analog output and digital I/O units with opto-isolated RS-485 serial interface to host computer. Eight 12-bit analog current (4-20mA) and voltage outputs <. Software selectable voltage ranges of 0-5V, 0-10V, ±5V. Seven bits of digital I/O configured on a... [See More]
- Host Connection: RS232/422/485
- Form Factor: Stand-alone
- Data Acquisition: Input/Output Module
- Analog Channels: 8
from Sealevel Systems, Inc.
The SeaI/O-450S-OEM provides 16 SPDT Form C relays. Connection to the host device is made via an RS-232 connection. The SeaI/O-450S-OEM is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options. Communicate with the SeaI/O-450S-OEM using industry standard Modbus... [See More]
- Host Connection: RS232/422/485
- Operating Temperature: 32 to 158
- Data Acquisition: Input/Output Module
from Red Pitaya, d.o.o.
SIGNALlab 250-12 is most sophisticated Red Pitaya product, built for more demanding industrial applications and research, where robustness and performance matter more than cost. [See More]
- Host Connection: RS232/422/485; USB; TTL; Ethernet; WiFi
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Data Acquisition: Data Acquisition Card; DAQ Instrument; Datalogger; Chart Recorder; Input Module; Output Module (optional feature); Input/Output Module
- Analog Channels: 6
from Moxa Inc.
The ioLogik E2240 comes with a combination of analog inputs and analog outputs in one module, and supports a wide range of sensors and actuators, including pH, conductivity, pressure, flow, and valves. [See More]
- Host Connection: RS232/422/485; Ethernet
- Form Factor: Stand-alone
- Data Acquisition: Input/Output Module
- Analog Channels: 8
from RainWise, Inc.
Long Range Computer Interface. The MKIIICC-LR computer interface is a device that will record and store weather data received from MK III sensor assemblies. The MKIIICC-LR has 32K of memory which allows the device to log data independently of a computer for 3 months. Connecting the Wireless Computer... [See More]
- Host Connection: RS232/422/485; Radio
- Form Factor: Stand-alone
- Data Acquisition: Datalogger
- Analog Channels: 1
from Gantner Instruments, Inc.
Q.bloxx XE is a new addition to the Q.series product family - the ideal EtherCAT DAQ solution for widely distributed installations that require higher performance and custom sensor terminations. Q.bloxx XE measurement modules possess integrated signal conditioning and arithmetic functions, packaged... [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Input/Output Module
- Analog Channels: 4
from Sifam Tinsley UK
P19 Temperature and Humidity Transducer. Features. • Built-in temperature and humidity sensor. • Calculation of selected physical quantities (dew-point temperature, absolute humidity). • Storage of measured and calculated maximum and minimum values. • Interface RS-485... [See More]
- Host Connection: RS232/422/485
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Input Module
- Analog Channels: 1
from Acromag, Inc.
2 or 4 input channels, RTD (100 ohm Pt, 120 ohm Ni, 10 ohm Cu) or resistance (0 to 500 ohms) input. Solid-state relays discrete output, Form A, SPST-NO. 10 to 36V DC, 24V AC power. Modbus-RTU high-speed RS-485. This signal conditioner is a dual or quad-channel analog input module with one... [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Input Module
- Analog Channels: 2
from CAS DataLoggers
The Industrial Data Logger. The dataTaker DT82I was designed for industrial applications that focus on flexible serial type communications such as RS232, RS422 and RS485. The DT82i is a robust, stand alone, low power data logger featuring USB memory stick support, 18 bit resolution, extensive... [See More]
- Host Connection: RS232/422/485; USB; Ethernet; Modem
- Form Factor: Stand-alone
- Data Acquisition: DAQ Instrument; Datalogger
- Analog Channels: 6
from West Control Solutions
The MRC 8000 incorporates numerous refinements over its 10 ½ MRC 7000 ™ sibling, including a larger 12 inch recording area; an advanced platen assembly which eliminates slide wire feedback for improved reliability; as well as the incorporation of optional isolated 4 –20mA outputs... [See More]
- Host Connection: RS232/422/485
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Chart Recorder
- Analog Channels: 2
from Opto 22
16-channel Digital Brain Mistic [See More]
- Host Connection: RS232/422/485
- Form Factor: Modular Bay or Slot System
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 16
from Campbell Scientific, Inc.
Campbell Scientific replaced the CR200-series dataloggers with the CR200X-series dataloggers. The new dataloggers feature expanded memory for the program and operating system (OS). The expanded memory allows: Up to 128 public variables instead of 48. Up to eight tables instead of four. Compiled... [See More]
- Host Connection: RS232/422/485; Radio
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Datalogger
- Analog Channels: 8
from OMEGA Engineering, Inc.
#162;Adds 24 Differential/48 Single-Ended Inputs to OMB ‘DAQBOARD ‘3000 Series PCI Boards and OMB ‘DAQ ‘3000 Series Personal Daq USB Data Acquisition Modules. ¢Any Input Can Be a Voltage or a Thermocouple. ¢Convenient Removable Screw-Terminal Connections. The... [See More]
- Host Connection: RS232/422/485
- Form Factor: Rack Mount
- Data Acquisition: Input Module
- Analog Channels: 24
from CHINO Works America Inc.
The AL3000 series conforming to CE-marking, UL and CSA is 100mm multi-point type hybrid recorders with a simultaneous display of multi-channel data, alarm display/printings and other unique features. A package software "KIDS" for data processing of measured values is available. [See More]
- Host Connection: RS232/422/485
- Form Factor: Stand-alone
- Data Acquisition: Chart Recorder
- Analog Channels: 6
from Automation24, Inc.
The SIMATIC S7-1200 communication module CM 1241 RS232 - 6ES72411AH320XB0 from Siemens provides a 9-pin D-sub interface for S7-1200 controllers. CM 1241 RS232 - 6ES72411AH320XB0 allows for MODBUS and other RS232 serial communication between S7 PLCs and field devices. [See More]
- Host Connection: RS232/422/485; RS232
- DC Voltage: 24 V DC
- Form Factor: DIN Rail; DIN rail 35 mm
- Operating Temperature: -4 to 140
from Extreme Engineering Solutions, Inc. (X-ES)
The XIt1087 provides I/O expansion for the XPedite8171 3U VPX SBC, with additional support for XPedite5205 embedded router assemblies. Its T-shaped design fits in VITA 46.10 RTM slots and allows for convenient access to more I/O connectors than standard VITA 46.10 RTMs. The XIt1087 can support up to... [See More]
- Host Connection: RS232/422/485; USB
- Form Factor: PC Board; 3U VPX
- Data Acquisition: Input/Output Module
- Network Options: Ethernet; 1 1000BASE-X, 3 10/100/1000BASE-T, 3 10/100BASE-TX
from ACCES I/O Products, Inc.
REMOTE ACCES 12-Bit Analog/Digital I/O Pod. RAD128 is an intelligent, eight channel, 12-bit, analog-to-digital converter unit that interfaces to a host computer through an optoisolated asynchronous serial port. It is packaged in a steel enclosure for remote installation and input connections are via... [See More]
- Host Connection: RS232/422/485
- Form Factor: PC Board; Stand-alone
- Data Acquisition: Data Acquisition Card; Input/Output Module
- Analog Channels: 8
from Sealevel Systems, Inc.
Control and monitor 16 optically isolated inputs and 8 Form C (SPDT) relay outputs with the SeaI/O-420S. Inputs can range from 5-30VDC while the Form C relay outputs can switch up to 60VDC @ 2A. The SeaI/O-420S is powered from your 9-30VDC source, or select from a variety of Sealevel power supply... [See More]
- Host Connection: RS232/422/485
- Isolation: Isolated Digital Inputs
- Data Acquisition: Input/Output Module
- DC Voltage: 5-30 VDC
from Red Pitaya, d.o.o.
STEMlab 125-14 4 Inputs is based on STEMlab 125-14 board, but instead of 2 inputs and 2 output channels offers 4 Input channels that with improved performance. [See More]
- Host Connection: RS232/422/485; USB; TTL; Ethernet; WiFi
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Data Acquisition: Data Acquisition Card; DAQ Instrument; Datalogger; Chart Recorder; Input Module; Output Module (optional feature); Input/Output Module
- Analog Channels: 8
from Moxa Inc.
Moxa's ioLogik E2242 is tailormade for use with remote monitoring and alarm systems. This Active Ethernet I/O product provides 4 analog inputs and 12 configurable DIOs for a 1:3 ratio of analog IOs to digital IOs perfectly adapted to water tank monitoring and environmental monitoring applications,... [See More]
- Host Connection: RS232/422/485; Ethernet
- Form Factor: Stand-alone
- Data Acquisition: Input/Output Module
- Analog Channels: 4
from RainWise, Inc.
Data logger for receiving and processing meteorological measurment values. The TROPOS is available in 3 different varieties in order to provide maximum flexability. Data is transmitted to TROPOS through the sensors that are linked to it. This data is then stored on a compact flash card (CF) within... [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Datalogger
- Outputs: Relay Output
from Gantner Instruments, Inc.
Q.bloxx XL is a new addition to the Q.series product family - the ideal DAQ solution for widely distributed installations that require higher performance and custom sensor terminations. Q.bloxx XL products are packaged in modular, DIN Rail mountable enclosures that easily snap together for system... [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Input/Output Module
- Analog Channels: 4
from Sifam Tinsley UK
P18 Transducer of temperature and standard signals. It is the device destined for the continuous measurement and conversion of relative humidity and ambient temperature into a digital or analog standard signal. Additionally P18D transducer is equipped in LCD screen. Features. • Built-in... [See More]
- Host Connection: RS232/422/485
- Analog Channels: 1
- Data Acquisition: Input Module
- Isolation: Channel-to-Channel Isolation
from Acromag, Inc.
DC Current or DC Voltage Signals. 6 input channels, 0 to 20mA in 3 selectable ranges (0 to 20 amps AC with optimal AC sensor) or ±78mV to ±10V DC with eight range options. 12 to 36V DC power. Profibus-DP, RS-485 network up to 12Mbaud. 961PB: 6 DC current input channels. 962PB: 6 DC... [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Input Module
- Analog Channels: 6
from CAS DataLoggers
A powerful portable data logger for everyday use. Flexible. Very easy to use. Economical. Handheld, ergonomic design. USB connectivity with PC. Ethernet or RS232 communications options available. Extended battery life for unattended logging. The lightweight, battery powered SQ2010 datalogger... [See More]
- Host Connection: RS232/422/485; USB; Ethernet
- Form Factor: Stand-alone
- Data Acquisition: DAQ Instrument; Datalogger
- Analog Channels: 8
from West Control Solutions
The VersaChart is perfect for demanding applications requiring a high performance recorder/controller with custom ramp/soak capability. The Versachart provides powerful true time based profile capability and exceptional value per data. Using advanced printing technology, the Versachart produces a... [See More]
- Host Connection: RS232/422/485
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Chart Recorder
- Analog Channels: 8
from Opto 22
The B1 brain board is an intelligent processor that operates as a slave device to a host computer, via an RS 422/485 serial link, to control digital I/O modules. The B1 mounts on Opto 22 I/O racks with header connectors; racks are available that accept Standard (G1), G4, Quad Pak, or SNAP I/O... [See More]
- Host Connection: RS232/422/485; Ethernet
- Form Factor: Modular Bay or Slot System
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 16
from Campbell Scientific, Inc.
Campbell Scientific replaced the CR200-series dataloggers with the CR200X-series dataloggers. The new dataloggers feature expanded memory for the program and operating system (OS). The expanded memory allows: Up to 128 public variables instead of 48. Up to eight tables instead of four. Compiled... [See More]
- Host Connection: RS232/422/485; Radio
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Datalogger
- Analog Channels: 8
from OMEGA Engineering, Inc.
The channels in the analog input part adopt insulated inputs, which means that temperature (thermocouple/resistance temperature detector) and voltage can be set differently for each channel. Eleven types of thermocouples, Pt100 and JPt100 temperature-measuring resistors, and a voltage up to 50V... [See More]
- Host Connection: RS232/422/485; Ethernet
- Form Factor: Portable
- Data Acquisition: Datalogger
- Analog Channels: 10
from CHINO Works America Inc.
LE5000 series are 250mm hybrid recorders with multi-range input. Innovative design high performance recorder provides high accuracy, ±0.05%; high speed scanning, 0.1second for 36 points and high speed recording, 1 line in 3 seconds. Simple operational keys and PC setting functions drastically... [See More]
- Host Connection: RS232/422/485; GPIB (IEEE 488, HPIB)
- Form Factor: Stand-alone
- Data Acquisition: Chart Recorder
- Analog Channels: 10
from Automation24, Inc.
The SIMATIC S7-1200 communication module CM 1241 RS232 - 6ES72411CH320XB0 from Siemens provides a 9-pin D-sub interface for S7-1200 controllers. CM 1241 RS422/RS485 - 6ES72411CH320XB0 allows for MODBUS and other RS422 and RS485 serial communication between S7 PLCs and field devices. [See More]
- Host Connection: RS232/422/485; RS422/485
- DC Voltage: 24 V DC
- Form Factor: DIN Rail; DIN rail 35 mm
- Operating Temperature: -4 to 140
from Extreme Engineering Solutions, Inc. (X-ES)
The XIt1170 provides I/O expansion for 3U VPX processing modules based on the AMD (formerly Xilinx) Versal ® Prime Adaptive Compute Acceleration Platform (ACAP). Its elongated design fits in VITA 46.10 RTM slots and allows for convenient access to more I/O connectors than standard VITA 46.10... [See More]
- Host Connection: Direct Backplane Interface; RS232/422/485
- Form Factor: PC Board; 3U VPX
- Data Acquisition: Input/Output Module
- Network Options: Ethernet; 2 10/100/1000BASE-T, 2 10GBASE-R
from ACCES I/O Products, Inc.
REMOTE ACCES 12-Bit Analog/Digital I/O Pod. RAG128 is an intelligent, eight channel, 12-bit, analog-to-digital converter unit that interfaces to a host computer through an opto-isolated asynchronous serial port. It is packaged in a steel enclosure for remote installation and input connections are... [See More]
- Host Connection: RS232/422/485
- Form Factor: PC Board; Stand-alone
- Data Acquisition: Data Acquisition Card; Input/Output Module
- Analog Channels: 8
from Sealevel Systems, Inc.
Control and monitor 16 optically isolated inputs and 8 Form C (SPDT) relay outputs with the SeaI/O-420S-OEM. Inputs can range from 5-30VDC, while the Reed relays provide long life switch closures well suited to low current devices. Inputs and outputs are grouped into four-bit segments that each... [See More]
- Host Connection: RS232/422/485
- Isolation: Isolated Digital Inputs
- Data Acquisition: Input/Output Module
- DC Voltage: 5-30 VDC
from Red Pitaya, d.o.o.
STEMlab 125-14 is our most versatile and popular product, which was introduced to the market in 2013 when Red Pitaya was established. Since then it has been used in a wide variety of contexts, from hobbyists and ham radio operators to industry, research, and space applications. [See More]
- Host Connection: RS232/422/485; USB; TTL; Ethernet; WiFi
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Data Acquisition: Data Acquisition Card; DAQ Instrument; Datalogger; Chart Recorder; Input Module; Output Module (optional feature); Input/Output Module
- Analog Channels: 6
from Moxa Inc.
Bring Intelligence to Temperature Measurement. The ioLogik E2260 brings intelligence to temperature sensors. It comes equipped with virtual channels that are designed to calculate the average value of each channel and the difference between two channels. And it does all this without a controller or... [See More]
- Host Connection: RS232/422/485; Ethernet
- Form Factor: Stand-alone
- Data Acquisition: Input/Output Module
- Analog Channels: 6
from Gantner Instruments, Inc.
Q.brixx XE is a new addition to the Q.series product family - the ideal EtherCAT DAQ solution for on-the-go applications in potentially harsh environments. Q.brixx XE DAQ systems consist of up to 10 measurement modules capable of up to 100 kHz sampling per channel and an integrated EtherCAT bus... [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Input/Output Module
- Analog Channels: 4
from Sifam Tinsley UK
P30 O Transducer of pulses, frequency, turns and operation time. Features. • 2 universal pulse inputs. • Version: standard with SD card with ethernet and internal memory. • Mathematical functions for each input. • Individual characteristics (up to 21 points) for each input. [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Input Module
- Analog Channels: 2
from Acromag, Inc.
Thermocouple (J, K, T, R, S, E, B, N), RTD (Pt, Ni, Cu), millivolt ( ±100mV DC) input. Single or dual mechanical relay alarms. 10-36V DC power. Software configured. Multi-function alarms (limit, window, deviation, rate-of-change, peak/valley detection). On/off controller capability. Acromag's... [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail; Terminal Block
- Data Acquisition: Input Module
- Analog Channels: 1
from CAS DataLoggers
Powerful data loggers for standard and high speed applications. Up to 20 Max readings per second on 1 channel. Fully configurable via the integrated keypad. 128*97 dot graphical LCD display. Compatible with B, C, D type thermocouples. Up to 16 universal inputs. High precision (0.05%). Advanced data... [See More]
- Host Connection: RS232/422/485; USB
- Form Factor: Stand-alone
- Data Acquisition: DAQ Instrument; Datalogger
- Analog Channels: 16
from Opto 22
The SNAP-B3000-ENET Ethernet I/O brain is a compact I/O and communications processor that connects real-world analog, digital, and serial devices with Ethernet networks for monitoring, control, and data acquisition. The brain can be used in an I/O unit as part of a SNAP PAC control system or in an... [See More]
- Host Connection: RS232/422/485; Ethernet
- Form Factor: Modular Bay or Slot System
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 64
from Campbell Scientific, Inc.
The CR1000 datalogger builds on the foundation of our CR10 and CR10X dataloggers, while adding the power and flexibility of our PakBus communications protocol and CRBasic programming. The CR1000 retains the versatility of the earlier loggers with a detachable wiring panel, separate power supply, and... [See More]
- Host Connection: RS232/422/485
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Datalogger
- Differential Channels: Differential Channels
from OMEGA Engineering, Inc.
The D3000 and D4000 computer-to-analog output interfaces are designed to be mounted remotely from a host computer and communicate with standard RS-232 and RS-485 serial ports. Simple ASCII commands are used to control a 12-bit digital-to-analog converter that is scaled to provide commonly used... [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Output Module
- Analog Channels: 1
from CHINO Works America Inc.
Model MR5300 is a small size and lightweight card logger capable to store up to 6000 temperature data, and is washable (IP64 - splash proof). [See More]
- Host Connection: RS232/422/485
- Form Factor: Stand-alone
- Data Acquisition: Datalogger
- Analog Channels: 1
from Automation24, Inc.
The SIMATIC S7-1200 communication module CM 1242-5 - 6GK72425DX300XE0 from Siemens is used for the connection of the S7-1200 controller to Profibus DP as a slave module. [See More]
- Host Connection: RS232/422/485; RS485
- Operating Temperature: 32 to 113
- Form Factor: DIN Rail; DIN rail 35 mm
from Extreme Engineering Solutions, Inc. (X-ES)
The XIt1090 provides I/O expansion for the XPedite7677 Intel ® Xeon ® D 3U VPX single board computer (SBC). Its T-shaped design fits in VITA 46.10 RTM slots and allows for convenient access to more I/O connectors than standard VITA 46.10 RTMs. The XIt1090 supports up to two RS-232/422/485... [See More]
- Host Connection: RS232/422/485; USB
- Form Factor: PC Board; 3U VPX
- Data Acquisition: Input/Output Module
- Network Options: Ethernet; 2 10GBASE-T, 4 10/100/1000BASE-T
from ACCES I/O Products, Inc.
REMOTE ACCES 24-Bit Analog/Digital I/O Pod. Model RAD242 is an intelligent, two-differential-channel, 24-bit analog-input interface unit that includes a Delta-Sigma A/D converter. The converter has a digital output filter with adjustable notch frequency from 10 Hz to 2000 Hz. The pod also has 13... [See More]
- Host Connection: RS232/422/485
- Form Factor: PC Board; Stand-alone
- Data Acquisition: Data Acquisition Card; Input/Output Module
- Analog Channels: 2
from Sealevel Systems, Inc.
Interface 32 optically isolated inputs via any Modbus RTU connection with the SeaI/O-430S. Inputs can range from 5-30VDC and provide 300V external isolation. Connection is made using convenient 3.5mm removable screw terminal connectors. The SeaI/O-430S is powered from your 9-30VDC source, or select... [See More]
- Host Connection: RS232/422/485
- Isolation: Isolated Digital Inputs
- Data Acquisition: Input/Output Module
- DC Voltage: 5-30 VDC
from Red Pitaya, d.o.o.
STEMlab 125-14 is our most versatile and popular product, which was introduced to the market in 2013 when Red Pitaya was established. Since then it has been used in wide variety of contexts, from hobbyists and ham radio operators to industry, research and space applications. [See More]
- Host Connection: RS232/422/485; USB; TTL; Ethernet; WiFi
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Data Acquisition: Data Acquisition Card; DAQ Instrument; Datalogger; Chart Recorder; Input Module; Output Module (optional feature); Input/Output Module
- Analog Channels: 6
from Moxa Inc.
Extend the Wiring Length. The ioLogik E2262 can extend the wiring length of your sensors up to 10 fold. For example, whereas the wiring for a J-Type may normally extend only 10 m, the ioLogik E2262 can be used to increase the J-Type TC wiring length up to 100 m. More Accurate Temperates. The ioLogik... [See More]
- Host Connection: RS232/422/485; Ethernet
- Form Factor: Stand-alone
- Data Acquisition: Input/Output Module
- Analog Channels: 8
from Gantner Instruments, Inc.
Q.raxx XE is an new addition to the Q.series product family - the ideal 19 ” rackmount EtherCAT DAQ solution for applications that require high channel density and custom sensor terminations. Q.brixx XE DAQ systems can consist of an integrated EtherCAT bus coupler for communication and 10... [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Input/Output Module
- Analog Channels: 4
from Sifam Tinsley UK
P30 U Transducer of temperature and standard signals. Features. • Universal measuring input. • Version: standard, with SD card, with Ethernet and internal memory. • Mathematical functions, i.amedian filter function on on measured value. • Individual characteristic (up to 21... [See More]
- Host Connection: RS232/422/485
- Form Factor: DIN Rail
- Data Acquisition: Input Module
- Analog Channels: 1
from Acromag, Inc.
2 or 4 input channels, 0 to 20mA DC, 0 to 10V DC (selectable ranges). 0 to 20mA DC, 0 to 10V DC (selectable ranges) output. 10-36V DC power. Software configured, computes arithmetic operations, evaluates conditional and Boolean arguments, executes track & hold functions. IntelliPack math modules... [See More]
- Host Connection: RS232/422/485
- Form Factor: Terminal Block
- Data Acquisition: Input Module
- Analog Channels: 2
from CAS DataLoggers
Powerful data loggers for standard and high speed applications. Up to 100 readings per second on 2 channels. In-built Ethernet connectivity. Up to four 3 or 4 wire Pt 100/1000 sensor inputs. Fully configurable via the integrated keypad - New!. 128*97 dot graphical LCD display - New!. Compatible with... [See More]
- Host Connection: RS232/422/485; USB; Ethernet
- Form Factor: Stand-alone
- Data Acquisition: DAQ Instrument; Datalogger
- Analog Channels: 16
from Opto 22
The SNAP-SCM-W2 provides two isolated channels of data input from attached devices that comply with the Wiegand interface format. Used with a SNAP PAC brain or R-series controller, the module complies with the Security Industry Association Standard Protocol for the 26-bit Wiegand Reader Interface. [See More]
- Host Connection: RS232/422/485; Ethernet
- Form Factor: Modular Bay or Slot System
- Data Acquisition: Input/Output Module
- Inputs: Thermocouple Input (optional feature); RTD Input (optional feature)
from Campbell Scientific, Inc.
The CR800 provides a lower-cost datalogger alternative for measurements of a limited number of sensors, yet can be used with most of our telecommunication devices such as cellular telephones, UHF/VHF RF modems, and satellite transceivers. The CR800 datalogger uses external power supplies and... [See More]
- Host Connection: RS232/422/485
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Datalogger
- Differential Channels: Differential Channels
from OMEGA Engineering, Inc.
RD9900 Series are network compatible paperless recorders with high performance and high operating function employed high visibility 5.6" TFT color LCD. High speed of sampling rate 100 ms for 12 points and high accuracy of ±0.1% were realized, and measured data is stored into internal memory... [See More]
- Host Connection: RS232/422/485; USB
- Form Factor: Panel / Chassis Mount
- Data Acquisition: Chart Recorder
- Analog Channels: 12
from CHINO Works America Inc.
Model MR5320 is a small size and lightweight 2-channel card logger capable to monitor temperature in two places and store up to 6000 data per channel, and is washable (IP64 - splash proof). [See More]
- Host Connection: RS232/422/485
- Form Factor: Stand-alone
- Data Acquisition: Datalogger
- Analog Channels: 2
from Automation24, Inc.
Using the digital output module SM 1222 DC - 6ES7222-1BH32-0XB0 from Siemens your SIMATIC S7-1200 controller can be expanded by 16 digital outputs. The digital output SM 1222 DC - 6ES7222 -1BH32-0XB0 has transistor outputs with an output current of 0.5 A at 24 V DC. [See More]
- Host Connection: RS232/422/485; RS485
- Form Factor: DIN Rail; DIN rail 35 mm
- Data Acquisition: Input/Output Module
- DC Voltage: 24 V DC
from Extreme Engineering Solutions, Inc. (X-ES)
The XIt1190 is a highly configurable development module providing I/O expansion to custom Ethernet switch configurations. Its T-shaped design fits in VITA 46.10 RTM slots and allows for convenient access to more I/O connectors than standard VITA 46.10 RTMs. The XIt1190 contains 10 total zQSFP+... [See More]
- Host Connection: RS232/422/485; USB
- Form Factor: PC Board; 3U VPX
- Data Acquisition: Input/Output Module
- Network Options: Ethernet; 17 10/100/1000BASE-T, 17 10GBASE-T, 34 10GBASE-KR, 7 40GBASE-KR4
from ACCES I/O Products, Inc.
Features. Remote Intelligent Digital I/O. Opto-Isolated RS-485 Serial Interface to Host Computer. 24-Bit Digital I/O Programmable Bit-by-Bit, in 8-Bit Bytes, or in 24-Bit Words. Digital Input and Output Voltages up to 50VDC. Open Collector Digital Outputs for Loads up to 350mA. Protective Steel... [See More]
- Host Connection: RS232/422/485
- Form Factor: Stand-alone
- Data Acquisition: Data Acquisition Card; Input/Output Module
- Digital I/O Channels: 24
from Sealevel Systems, Inc.
Interface 32 optically isolated inputs via any Modbus RTU connection with the SeaI/O-430S-OEM. Inputs can range from 5-30VDC and provide 300V external isolation. Connection is made using convenient 3.5mm removable screw terminal connectors. The SeaI/O-430S-OEM is powered from your 9-30VDC source, or... [See More]
- Host Connection: RS232/422/485
- Isolation: Isolated Digital Inputs
- Data Acquisition: Input/Output Module
- DC Voltage: 5-30 VDC
from Red Pitaya, d.o.o.
STEMlab 125-14 Edu Pack is based on Red Pitaya's best-selling DAQ platform and with the chosen accessories a perfect fit for educational purposes. [See More]
- Host Connection: RS232/422/485; USB; TTL; Ethernet; WiFi
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Data Acquisition: Data Acquisition Card; DAQ Instrument; Datalogger; Chart Recorder; Input Module; Output Module (optional feature); Input/Output Module
- Analog Channels: 6
from Moxa Inc.
The ioLogik W5340-HSDPA micro controller is a rugged, compact solution for remote monitoring and alarm systems. With the ioLogik W5340-HSDPA, you can define a cellular connection strategy, including Always-On and Wake-On-Demand, to optimizedata transmission rates for different applications. In... [See More]
- Host Connection: RS232/422/485
- Form Factor: Stand-alone
- Data Acquisition: Input/Output Module
- Digital I/O Channels: 0